Binary mineral sulfides sorbent with wide temperature range for rapid elemental mercury uptake from coal combustion flue gas.

Developing efficient sorbents with rapid kinetics is the main challenge encountered for Hg0 capture from coal combustion flue gas in a sorbent injection scenario. Binary mineral sulfide-based materials combining copper sulfide (CuS) and zinc sulfide (ZnS) to exert their capabilities for Hg0 capture at the low- and high-temperature was for the first time reported for Hg0 removal to realize a wide temperature range sorbents. When the molar ratio between CuS and ZnS was 10%, the as-synthesized 10Cu-Zn nanocomposite exhibited excellent Hg0 uptake rate at 150°C that could degrade 40 µg/m3 of Hg0 to undetectable level at the end of a 60-s experiment with the dosage of only 1 mg. This Hg0 uptake rate is folds higher compared to that when bare CuS or ZnS was adopted alone at this specific temperature. The typical flue gas atmospheres had negligible effect on Hg0 removal over 10Cu-Zn in a short contact time, which further suggests that the binary sorbents were proper to be injected before the electrostatic precipitator system. Moreover, it is found that, by adjusting the ratio between CuS and ZnS, it is potential to develop binary sorbent suiting any temperature conditions that may achieve an exceedingly high Hg0 capture performance. Thus, this work not only justified the candidature of 10Cu-Zn as a promising alternative to traditional activated carbon for Hg0 capture from coal combustion flue gas but also guided the future development of multi-component mineral sulfide-based sorbents for Hg0 pollution remediation from various industrial flue gases.

Toward an Understanding of Fundamentals Governing the Elemental Mercury Sequestration by Metal Chalcogenides.

The lack of fundamental understanding of the chemistry governing elemental mercury (Hg0) immobilization over metal chalcogenides (MChals) is the key challenge impeding the interpretations of Hg0 behaviors in global cycles. This work therefore made the first endeavor toward the establishment of a roadmap capable of describing and depicting Hg0 sequestrations by various MChals. The results suggest that the binding energy between the metal cations and chalcogen anions is a proper descriptor that could predict the immobilization behaviors of Hg0 over zinc chalcogenides (ZnS and ZnSe) that exhibit an identical molecular structure, i.e., the lower the binding energy was, the higher the Hg0 sequestration performance that was obtained. The validity of this descriptor was further demonstrated over a series of MChals sharing structural similarities. A scaling relationship was thus established, which further proved the Hg0 immobilization performance of MChals was generally in reverse proportion to the above-mentioned binding energy. Although there is still a long way toward the proposal of a full roadmap that can predict and depict the Hg0 immobilization behaviors over all MChals, this work marks the first step on this road and provides guides for further studies by understanding the fundamentals governing Hg0 sequestration over MChals with structural similarities.

Amorphous Molybdenum Selenide Nanosheet as an Efficient Trap for the Permanent Sequestration of Vapor-Phase Elemental Mercury.

The key challenge of vapor-phase elemental mercury (Hg0) sequestration is the rational design of a sorbent with abundantly available ligands that exhibit excellent affinity toward Hg0 to simultaneously achieve a high uptake capacity and rapid capture rate. In this work, it is demonstrated how the correct combination of functional ligands and structural properties can form an ideal remediator for permanent Hg0 immobilization. The adsorption capacity of an amorphous molybdenum triselenide (MoSe3) nanosheet greater than 1000 mg g-1 is the highest recorded value compared to previously reported sorbents tested in a fixed-bed reactor. Meanwhile, the uptake rate of 240 µg g-1 min-1 is also the highest recorded rate value. Mercury selenide as formed exhibits extremely low leachability when environmentally exposed. This impressive performance is primarily attributed to the appropriate layer space between the nanosheets that permeated Hg0 and the existence of diselenide (Se2 2-) ligands that exhibit excellent affinity toward Hg0. Thus, this work not only provides a promising trap for permanent Hg0 sequestration from industrial and domestic sources with minimum hazard but also provides a detailed illustration of using structural advantages to obtain an ideal sorbent as well as guidance for the further development of Hg0 decontamination techniques.

Role of Sulfur Trioxide (SO3) in Gas-Phase Elemental Mercury Immobilization by Mineral Sulfide.

Mineral sulfide based sorbents were superior alternatives to traditional activated carbons for elemental mercury (Hg0) immobilization in industrial flue gas. A systematical study concerning the influence of sulfur trioxide (SO3) on Hg0 adsorption over a nanosized copper sulfide (Nano-CuS) was for the first time conducted. SO3 was found to significantly inhibit the Hg0 removal over Nano-CuS partially because SO3 oxidized the reduced sulfur species (sulfide) with high affinity to mercury to its oxidized sulfur species (sulfate). Moreover, a brand new "oxidation-reduction" mechanism that led to a simultaneous oxidation of sulfide and reduction of mercury on the immobilized mercury sulfide (HgS) was responsible for the inhibitory effect. Even though the released Hg0 from the reduction of mercury in HgS could be oxidized by SO3 into its sulfate form (HgSO4) and recaptured by the sorbent, the "oxidation-reduction" mechanism still compromised the Hg0 capture performance of the Nano-CuS because HgSO4 deposited on the sorbent surface could be easily leached out when environmentally exposed. These new insights into the role of SO3 in Hg0 capture over Nano-CuS can help to determine possible solutions and facilitate the application of mineral sulfide sorbents as outstanding alternatives to activated carbons for Hg0 immobilization in industrial flue gas.

Dual Roles of Nano-Sulfide in Efficient Removal of Elemental Mercury from Coal Combustion Flue Gas within a Wide Temperature Range.

Nanostructured zinc sulfide (Nano-ZnS) has been demonstrated to be an efficient adsorbent for removal of elemental mercury (Hg0). However, the Hg0 removal performance deteriorates once the flue gas temperature deviates from the optimal temperature of 180 °C. In this study, ultraviolet (UV) light, which is generally generated through corona discharge in electrostatic precipitators (ESPs), was adopted to enhance Hg0 removal by Nano-ZnS. With the UV irradiation, Nano-ZnS exhibited excellent performance in Hg0 removal within a much wide temperature range from room temperature to 240 °C. A Hg0 removal efficiency of 99% was achieved at 60 °C even under extremely adverse conditions, that is, gas flow with an extremely high gas hourly space velocity but without hydrogen chloride. At low temperatures, Hg0 was mainly oxidized by superoxide radicals (•O2-) and hydroxyl radicals (•OH) generated by UV photostimulation to form mercuric oxide (HgO). At high temperatures, most Hg0 was immobilized as mercuric sulfide (HgS), as both the enhanced chemisorption and the accelerated transformation of HgO to HgS facilitated the formation of HgS. Compared with commercial activated carbon, injection of Nano-ZnS can utilize the UV in ESPs to warrant a higher Hg0 removal efficiency within a much wider temperature range.

Multiform Sulfur Adsorption Centers and Copper-Terminated Active Sites of Nano-CuS for Efficient Elemental Mercury Capture from Coal Combustion Flue Gas.

Nanostructured copper sulfide synthesized with the assistance of surfactant with nanoscale particle size and high Brunauer-Emmett-Teller surface area was for the first time applied for the capture of elemental mercury (Hg0) from coal combustion flue gas. The optimal operation temperature of nano-CuS for Hg0 adsorption is 75 °C, which indicates that injection of the sorbent between the wet flue gas desulfurization and the wet electrostatic precipitator systems is feasible. This assures that the sorbent is free of the adverse influence of nitrogen oxides. Oxygen (O2) and sulfur dioxide exerted a slight influence on Hg0 adsorption over the nano-CuS. Water vapor was shown to moderately suppress Hg0 capture efficiency via competitive adsorption. The simulated adsorption capacities of nano-CuS for Hg0 under pure nitrogen (N2), N2 + 4% O2, and simulated flue gas reached 122.40, 112.06, and 89.43 mgHg0/g nano-CuS, respectively. Compared to those of traditional commercial activated carbons and metal sulfides, the simulated adsorption capacities of Hg0 over the nano-CuS are at least an order of magnitude higher. Moreover, with only 5 mg loaded in a fixed-bed reactor, the Hg0 adsorption rate reached 11.93-13.56 µg/g min over nano-CuS. This extremely speedy rate makes nano-CuS promising for a future sorbent injection technique. The anisotropic growth of nano-CuS was confirmed by X-ray diffraction analysis and provided a fundamental aspect for nano-CuS surface reconstruction and polysulfide formation. Further X-ray photoelectron spectroscopy and Hg0 temperature-programmed desorption tests showed that the active polysulfide, S-S dimers, and copper-terminated sites contributed primarily to the extremely high Hg0 adsorption capacity and rate. With these advantages, nano-CuS appears to be a highly promising alternative to traditional sorbents for Hg0 capture from coal combustion flue gas.