Antibacterial and antioxidant metabolites from the insect-associated fungus Aspergillus fumigatus.

The research on bioactive secondary metabolites from Aspergillus fumigatus afforded six compounds, which were identified by mass spectrometer (MS) and nuclear magnetic resonance (NMR) spectroscopic analysis as cyclopyazonic acid (1), trypacidin A (2), asterric acid (3), methyl asterrate (4), demethylcitreoviranol (5), as well as (5-hydroxy-2-oxo-2H-pyran-4-yl) methyl acetate (6). Cyclopyazonic acid (1) was found to have potent antibacterial effects, especially against Bacillus licheniformis with minimal inhibitory concentration (MIC) value of 3.7µg/mL. Its antibacterial effects were possibly related to the olefinic acid group in the structure. Phenyl ether derivatives 3 and 4, and trypacidin A (2) also exhibited antimicrobial effects. In addition, compound 6 showed significant antioxidant effects with half maximal effective concentration (EC50) value of 10.2µM in the ABTS (2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid) assay, which was better than the positive control.

Production, structural characterization, and antiproliferative activity of exopolysaccharide produced by Scleroderma areolatum Ehrenb with different carbon source.

The effects of different three carbon sources, that is, glucose, fructose, and sucrose, on production, molecular properties and antiproliferative activity of exopolysaccharide (EPS), were evaluated in the submerged culture of Scleroderma areolatum Ehrenb. Among carbon sources examined, the addition of sucrose maximizes the mycelia production, while fructose could maximize the EPS yield. Although the predominant carbohydrate compositions identified were gluconic acid and mannose, the monosaccharide composition of EPSs was also different significantly. FT-IR spectral analysis revealed there was no significant difference among the prominent characteristic groups in three EPSs. The molecular weight of EPSs was also affected by carbon source, being generally lower compared with that with glucose. However, all EPSs molecule existed as nearly globular shape form in aqueous solution. The variation of carbon sources also affected antiproliferative activity examined in vitro using cell proliferation assay. Fructose was optimal carbon source giving higher antiproliferative activity probably due to the relatively high contents of xylose in the EPS with low molecular weight.

Bacterial cellulose production by Acetobacter xylinum ATCC 23767 using tobacco waste extract as culture medium.

In this study, bacterial cellulose (BC) was synthesized by Acetobacter xylinum ATCC 23767 using tobacco waste extract (TWE) as a carbon source. Nicotine was found to be an inhibitory factor for BC synthesis, but it can be removed at pH 9.0 by steam distillation. After removing nicotine, the BC production was 2.27 g/L in TWE prepared with solid-liquid (S-L) ratio at 1:10. To further enhance the BC production, two fermentation stages were performed over 16 days by re-adjusting the pH to 6.5 at 7 days, after the first fermentation stage was completed. Using this two-stage fermentation, the BC production could reach 5.2 g/L. Structural and thermal analysis by FE-SEM, FT-IR, XRD and TGA showed the properties of BC obtained from TWE were similar to that from Hestrin-Schramm (HS) medium. Considering the huge disposal tobacco waste in China, the present study provides an alternative methodology to synthesize BC.

On-Demand Fabrication of Si/SiO2 Nanowire Arrays by Nanosphere Lithography and Subsequent Thermal Oxidation.

We demonstrate the fabrication of the large-area arrays of vertically aligned Si/SiO2 nanowires with full tunability of the geometry of the single nanowires by the metal-assisted chemical etching technique and the following thermal oxidation process. To fabricate the geometry controllable Si/SiO2 nanowire (NW) arrays, two critical issues relating with the size control of polystyrene reduction and oxide thickness evolution are investigated. Through analyzing the morphology evolutions of polystyrene particles, we give a quantitative description on the diameter variations of polystyrene particles with the etching time of plasma etching. Based on this, pure Si NW arrays with controllable geometry are generated. Then the oxide dynamic of Si NW is analyzed by the extended Deal-Grove model. By control, the initial Si NWs and the thermal oxidation time, the well-aligned Si/SiO2 composite NW arrays with controllable geometry are obtained.

Ti/Au Cathode for Electronic transport material-free organic-inorganic hybrid perovskite solar cells.

We have fabricated organic-inorganic hybrid perovskite solar cell that uses a Ti/Au multilayer as cathode and does not use electron transport materials, and achieved the highest power conversion efficiency close to 13% with high reproducibility and hysteresis-free photocurrent curves. Our cell has a Schottky planar heterojunction structure (ITO/PEDOT:PSS/perovskite/Ti/Au), in which the Ti insertion layer isolate the perovskite and Au layers, thus proving good contact between the Au and perovskite and increasing the cells' shunt resistance greatly. Moreover, the Ti/Au cathode in direct contact with hybrid perovskite showed no reaction for a long-term exposure to the air, and can provide sufficient protection and avoid the perovskite and PEDOT:PSS layers contact with moisture. Hence, the Ti/Au based devices retain about 70% of their original efficiency after 300 h storage in the ambient environment.

Determination methods for the anticancer drug dicycloplatin, a supramolecule assembled through hydrogen bonding.

Dicycloplatin is a new generation supramolecular platinum-containing anti-cancer drug. Due to its structure, it is difficult to differentiate dicycloplatin from physical mixtures of carboplatin and cyclobutane dicarboxylate, and confounding results may arise during drug characterization. To solve this problem, this study aims to provide a reliable and reproducible standard for the determination of dicycloplatin. A simple method for dicycloplatin quality control has been developed using X-ray powder diffraction (XRPD) and high performance liquid chromatography (HPLC). XRPD allowed the control of impurities and dissociation of the dicycloplatin active ingredient to less than 1%, and HPLC allowed the monitoring and control of the relative molar ratio of carboplatin and cyclobutane dicarboxylate within the purity range. The study proved for the first time that the dicycloplatin supramolecule is substantially different from a physical mixture of carboplatin and cyclobutane dicarboxylate.

Crystal structure of (E)-1-(4-chloro-phen-yl)ethanone O-de-hydro-abietyloxime.

The title compound, C28H34ClNO2 {systematic name: (E)-1-(4-chloro-phen-yl)ethanone O-[(1R,4aS,10aR)-7-isopropyl-1,4a-di-methyl-1,2,3,4,4a,9,10,10a-octa-hydro-phenanthrene-1-carbonyl]oxime}, was synthesized from de-hydro-abietic acid. In the de-hydro-abietyl moiety, the central and terminal cyclo-hexane rings display chair and half-chair conformations, respectively, and a trans-ring junction. The C=N bond is in an E conformation and the C-O-N=C torsion angle is 148.1 (5)°. No directional inter-actions except van der Waals contacts occur in the crystal structure.

Crystal structure of (E)-1-(4-meth-oxy-phen-yl)ethanone O-de-hydro-abietyloxime.

In the title compound, C29H37NO3 {systematic name: (E)-1-(4-meth-oxy-phen-yl)ethanone O-[(1R,4aS,10aR)-7-isopropyl-1,4a-dimethyl-1,2,3,4,4a,9,10,10a-octa-hydro-phenanthrene-1-carbon-yl]oxime}, a new derivative of de-hydro-abietic acid, the two cyclo-hexane rings exhibit a trans-ring junction and are in chair and half-chair conformations. The C=N double bond exhibits an E conformation.

Chitosan-coated mesoporous microspheres of calcium silicate hydrate: environmentally friendly synthesis and application as a highly efficient adsorbent for heavy metal ions.

Chitosan-coated calcium silicate hydrate (CSH/chitosan) mesoporous microspheres formed by self-assembly of nanosheets have been synthesized in aqueous solution under ambient conditions without using any toxic surfactant or organic solvent. The method reported herein has advantages of simplicity, low cost and being environmentally friendly. The BET specific surface area of CSH/chitosan mesoporous microspheres is measured to be as high as ~356 m(2) g(-1), which is considerably high among calcium silicate materials. The as-prepared CSH/chitosan mesoporous microspheres are promising adsorbent and exhibit a quick and highly efficient adsorption behavior toward heavy metal ions of Ni(2+), Zn(2+), Cr(3+), Pb(2+) Cu(2+) and Cd(2+) in aqueous solution. The adsorption kinetics can be well fitted by the pseudo second-order model. The maximum adsorption amounts of Ni(2+), Zn(2+), Pb(2+), Cu(2+) and Cd(2+) on CSH/chitosan mesoporous microspheres are extremely high, which are 406.6, 400, 796, 425 and 578 mg/g, respectively. The CSH/chitosan adsorbent exhibits the highest affinity for Pb(2+) ions among five heavy metal ions. The adsorption capacities of the CSH/chitosan adsorbent toward heavy metal ions are relatively high compared with those reported in the literature.