Selenophene-fused Perylene Diimide-based Cathode Interlayer Enables 19% Efficiency Binary Organic Solar Cells via Stimulative Charge Extraction.

The cathode interlayer is crucial for the development of organic solar cells (OSCs), but the research on simple and efficient interlayer materials is lagging behind. Here, a donor-acceptor (D-A) typed selenophene-fused perylene diimide (PDI) derivative (SePDI3) is developed as cathode interlayer material (CIM) for OSCs, and a non-fused PDI derivative (PDI3) is used as the control CIM for comparison. Compared to PDI3, SePDI3 shows a stronger self-doping effect and better crystallinity, resulting in better charge transport ability. Furthermore, the interaction between SePDI3 and L8-BO can form an efficient extraction channel, leading to superior charge extraction behavior. Finally, benefitting from significantly enhanced charge transport and extraction capacity, the SePDI3-based device displays a champion PCE of 19.04% with an ultrahigh fill factor of 81.65% for binary OSCs based on PM6:L8-BO active layer, which is one of the top efficiencies reported to date in binary OSCs based novel CIMs. Our work prescribes a facile and effective fusion strategy to develop high-efficiency CIMs for OSCs.

The Development of Quinoxaline-Based Electron Acceptors for High Performance Organic Solar Cells.

In the recent advances of organic solar cells (OSCs), quinoxaline (Qx)-based nonfullerene acceptors (QxNFAs) have attracted lots of attention and enabled the recorded power conversion efficiency approaching 20%. As an excellent electron-withdrawing unit, Qx possesses advantages of many modifiable sites, wide absorption range, low reorganization energy, and so on. To develop promising QxNFAs to further enhance the photovoltaic performance of OSCs, it is necessary to systematically summarize the QxNFAs reported so far. In this review, all the focused QxNFAs are classified into five categories as following: SM-Qx, YQx, fused-YQx, giant-YQx, and polymer-Qx according to the molecular skeletons. The molecular design concepts, relationships between the molecular structure and optoelectronic properties, intrinsic mechanisms of device performance are discussed in detail. At the end, the advantages of this kind of materials are summed up, the molecular develop direction is prospected, the challenges faced by QxNFAs are given, and constructive solutions to the existing problems are advised. Overall, this review presents unique viewpoints to conquer the challenge of QxNFAs and thus boost OSCs development further toward commercial applications.

Control of Multi-Fluorination Number and Position in D-π-A Type Polymers and Their Impact on High-Voltage Organic Photovoltaics.

Exploring the structure-performance relationship of high-voltage organic solar cells (OSCs) is significant for pushing material design and promoting photovoltaic performance. Herein, we chose a D-π-A type polymer composed of 4,8-bis(thiophene-2-yl)-benzo[1,2-b:4,5-b']dithiophene (BDT-T) and benzotriazole (BTA) units as the benchmark to investigate the effect of the fluorination number and position of the polymers on the device performance of the high-voltage OSCs, with a benzotriazole-based small molecule (BTA3) as the acceptor. F00, F20, and F40 are the polymers with progressively increasing F atoms on the D units, while F02, F22, and F42 are the polymers with further attachment of F atoms to the BTA units based on the above three polymers. Fluorination positively affects the molecular planarity, dipole moment, and molecular aggregations. Our results show that VOC increases with the number of fluorine atoms, and fluorination on the D units has a greater effect on VOC than on the A unit. F42 with six fluorine atom substitutions achieves the highest VOC (1.23 V). When four F atoms are located on the D units, the short-circuit current (JSC) and fill factor (FF) plummet, and before that, they remain almost constant. The drop in JSC and FF in F40- and F42-based devices may be attributed to inefficient charge transfer and severe charge recombination. The F22:BTA3 system achieves the highest power conversion efficiency of 9.5% with a VOC of 1.20 V due to the excellent balance between the photovoltaic parameters. Our study provides insights for the future application of fluorination strategies in molecular design for high-voltage organic photovoltaics.

Tethered Helical Ladder-Type Aromatic Lactams.

Tethered nonplanar aromatics (TNAs) make up an important class of nonplanar aromatic compounds showing unique features. However, the knowledge on the synthesis, structures, and properties of TNAs remains insufficient. In this work, a new type of TNAs, the tethered aromatic lactams, is synthesized via Pd-catalyzed consecutive intramolecular direct arylations. These molecules possess a helical ladder-type conjugated system of up to 13 fused rings. The overall yields ranged from 3.4 to 4.3%. The largest of the tethered aromatic lactams, 6L-Bu-C14, demonstrates a guest-adaptive hosting capability of TNAs for the first time. When binding fullerene guests, the cavity of 6L-Bu-C14 became more circular to better accommodate spherical fullerene molecules. The host-guest interaction is thoroughly studied by X-ray crystallography, theoretical calculations, fluorescence titration, and nuclear magnetic resonance (NMR) titration experiments. 6L-Bu-C14 shows stronger binding with C70 than with C60 due to the better convex-concave π-π interaction. P and M enantiomers of all tethered aromatic lactams show distinct and persistent chiroptical properties and demonstrate the potential of chiral TNAs as circularly polarized luminescence (CPL) emitters.

Room Temperature Ionic Liquid Capping Layer for High Efficiency FAPbI3 Perovskite Solar Cells with Long-Term Stability.

Ionic liquid salts (ILs) are generally recognized as additives in perovskite precursor solutions to enhance the efficiency and stability of solar cells. However, the success of ILs incorporation as additives is highly dependent on the precursor formulation and perovskite crystallization process, posing challenges for industrial-scale implementation. In this study, a room-temperature spin-coated IL, n-butylamine acetate (BAAc), is identified as an ideal passivation agent for formamidinium lead iodide (FAPbI3) films. Compared with other passivation methods, the room-temperature BAAc capping layer (BAAc RT) demonstrates more uniform and thorough passivation of surface defects in the FAPbI3 perovskite. Additionally, it provides better energy level alignment for hole extraction. As a result, the champion n-i-p perovskite solar cell with a BAAc capping layer exhibits a power conversion efficiency (PCE) of 24.76%, with an open-circuit voltage (Voc) of 1.19 V, and a Voc loss of ≈330 mV. The PCE of the perovskite mini-module with BAAc RT reaches 20.47%, showcasing the effectiveness and viability of this method for manufacturing large-area perovskite solar cells. Moreover, the BAAc passivation layer also improves the long-term stability of unencapsulated FAPbI3 perovskite solar cells, enabling a T80 lifetime of  3500 h when stored at 35% relative humidity at room temperature in an air atmosphere.

Optimizing Molecular Crystallinity and Suppressing Electron-Phonon Coupling in Completely Non-Fused Ring Electron Acceptors for Organic Solar Cells.

High open-circuit voltage (Voc) organic solar cells (OSCs) have received increasing attention because of their promising application in tandem devices and indoor photovoltaics. However, the lack of a precise correlation between molecular structure and stacking behaviors of wide band gap electron acceptors has greatly limited its development. Here, we adopted an asymmetric halogenation strategy (AHS) and synthesized two completely non-fused ring electron acceptors (NFREAs), HF-BTA33 and HCl-BTA33. The results show that AHS significantly enhances the molecular dipoles and suppresses electron-phonon coupling, resulting in enhanced intramolecular/intermolecular interactions and decreased nonradiative decay. As a result, PTQ10 : HF-BTA33 realizes a power conversion efficiency (PCE) of 11.42 % with a Voc of 1.232 V, higher than that of symmetric analogue F-BTA33 (PCE=10.02 %, Voc=1.197 V). Notably, PTQ10 : HCl-BTA33 achieves the highest PCE of 12.54 % with a Voc of 1.201 V due to the long-range ordered π-π packing and enhanced surface electrostatic interactions thereby facilitating exciton dissociation and charge transport. This work not only proves that asymmetric halogenation of completely NFREAs is a simple and effective strategy for achieving both high PCE and Voc, but also provides deeper insights for the precise molecular design of low cost completely NFREAs.

Dithienoquinoxalineimide-Based Polymer Donor Enables All-Polymer Solar Cells Over 19 % Efficiency.

All-polymer solar cells (all-PSCs) have been regarded as one of the most promising candidates for commercial applications owing to their outstanding advantages such as mechanical flexibility, light weight and stable film morphology. However, compared to large amount of new-emerging excellent polymer acceptors, the development of high-performance polymer donor lags behind. Herein, a new D-π-A type polymer donor, namely QQ1, was developed based on dithienoquinoxalineimide (DTQI) as the A unit, benzodithiophene with thiophene-conjugated side chains (BDTT) as the D unit, and alkyl-thiophene as the π-bridge, respectively. QQ1 not only possesses a strong dipole moment, but also shows a wide band gap of 1.80 eV and a deep HOMO energy level of -5.47 eV, even without halogen substituents that are commonly indispensable for high-performance polymer donors. When blended with a classic polymer acceptor PY-IT, the QQ1-based all-PSC delivers an outstanding PCE of 18.81 %. After the introduction of F-BTA3 as the third component, a record PCE of 19.20 % was obtained, the highest value reported so far for all-PSCs. The impressive photovoltaic performance originates from broad absorption range, reduced energy loss, and compact π-π stacking. These results provide new insight in the rational design of novel nonhalogenated polymer donors for further development of all-PSCs.

Noncovalent Interaction Boosts Performance and Stability of Organic Solar Cells Based on Giant-Molecule Acceptors.

Designing giant-molecule acceptors is deemed as an up-and-coming strategy to construct stable organic solar cells (OSCs) with high performance. Herein, two giant dimeric acceptors, namely, DYV and DYFV, have been designed and synthesized by linking two Y-series derivatives with a vinyl unit. DYFV exhibits more red-shifted absorption, down-shifted energy levels, and enhanced intermolecular packing than DYV because the intramolecular noncovalent interaction (H···F) of DYFV leads to better coplanarity of the backbone. The D18:DYFV film owns a distinct nanofibrous nanophase separation structure, a more dominant face-on orientation, and more balanced carrier mobilities. Therefore, the D18:DYFV OSC achieves a higher photoelectron conversion efficiency of 17.88% and a longer-term stability with a t80 over 45,000 h compared with the D18:DYV device. The study demonstrates that the intramolecular noncovalent interaction is a superior strategy to design giant-molecule acceptors and boost the photovoltaic performance and stability of the OSCs.

Effect of Number and Position of Chlorine Atoms on the Photovoltaic Performance of Asymmetric Nonfullerene Acceptors.

It has been well proved that the introduction of halogen can effectively modify the optoelectronic properties of classic symmetric nonfullerene acceptors (NFAs). However, the relevant studies for asymmetric NFAs are limited, especially the effect of halogen substitution number and position on the photovoltaic performance is not clear. In this work, four asymmetric NFAs with A-D-A1-A2 structure are developed by tuning the number and position of chlorine atoms on the 1,1-dicyanomethylene-3-indanone end groups, namely, A303, A304, A305, and A306. The related NFAs show progressively deeper energy levels and red-shifted absorption spectra as the degree of chlorination increases. The PM6:A306-constructed organic solar cells (OSCs) give a champion power conversion efficiency (PCE) of 13.03%. This is mainly ascribed to the most efficient exciton dissociation and collection, suppressed charge recombination, and optimal morphology. Moreover, by alternating the substitution position, the PM6:A305-based device yielded a higher PCE of 12.53% than that of PM6:A304 (12.05%). This work offers fresh insights into establishing excellent asymmetric NFAs for OSCs.

A2 -A1 -D-A1 -A2 -Type Nonfullerene Acceptors.

The A2 -A1 -D-A1 -A2 -type molecules consist of one electron-donating (D) core flanked by two electron-accepting units (A1 and A2 ) and have emerged as an essential branch of nonfullerene acceptors (NFAs). These molecules generally possess higher molecular energy levels and wider optical bandgaps compared with those of the classic A-D-A- and A-DA'D-A-type NFAs, owing to the attenuated intramolecular charge transfer effect. These characteristics make them compelling choices for the fabrication of high-voltage organic photovoltaics (OPVs), ternary OPVs, and indoor OPVs. Herein, the recent progress in the A2 -A1 -D-A1 -A2 -type NFAs are reviewed, including the molecular engineering, structure-property relationships, voltage loss (Vloss ), device stability, and photovoltaic performance of binary, ternary, and indoor OPVs. Finally, the challenges and provided prospects are discussed for the further development of this type of NFAs.

Benzotriazole-Based 3D Four-Arm Small Molecules Enable 19.1 % Efficiency for PM6 : Y6-Based Ternary Organic Solar Cells.

A third component featuring a planar backbone structure similar to the binary host molecule has been the preferred ingredient for improving the photovoltaic performance of ternary organic solar cells (OSCs). In this work, we explored a new avenue that introduces 3D-structured molecules as guest acceptors. Spirobifluorene (SF) is chosen as the core to combine with three different terminal-modified (rhodanine, thiazolidinedione, and dicyano-substituted rhodanine) benzotriazole (BTA) units, affording three four-arm molecules, SF-BTA1, SF-BTA2, and SF-BTA3, respectively. After adding these three materials to the classical system PM6 : Y6, the resulting ternary devices obtained ultra-high power-conversion efficiencies (PCEs) of 19.1 %, 18.7 %, and 18.8 %, respectively, compared with the binary OSCs (PCE=17.4 %). SF-BTA1-3 can work as energy donors to increase charge generation via energy transfer. In addition, the charge transfer between PM6 and SF-BTA1-3 also acts to enhance charge generation. Introducing SF-BTA1-3 could form acceptor alloys to modify the molecular energy level and inhibit the self-aggregation of Y6, thereby reducing energy loss and balancing charge transport. Our success in 3D multi-arm materials as the third component shows good universality and brings a new perspective. The further functional development of multi-arm materials could make OSCs more stable and efficient.

Fused Benzotriazole A-Unit Constructs a D-π-A Polymer Donor for Efficient Organic Photovoltaics.

Herein, we originally developed a fused ring building block as an acceptor unit, namely, 2,6,10-trihydro-carbazole[3,4-c:5,6-c]bis[1,2,5]-triazole (CTA), through fusing two benzotriazoles (BTA) with a pyrrole ring. A p-type polymer PE93 containing the CTA unit exhibits relatively high molecular energy levels and excellent luminescent properties. The PE93:BTA76-based solar cell obtained a device efficiency of 12.16%, with a VOC of 0.94 V and a low nonradiative recombination loss of 0.18 eV. The results suggest that the CTA unit is an efficient acceptor unit to achieve excellent photovoltaic performance.

Recent Advances in Organic Photovoltaic Materials Based on Thiazole-Containing Heterocycles.

Organic solar cells (OSCs) have achieved great progress, driven by the rapid development of wide bandgap electron donors and narrow bandgap non-fullerene acceptors (NFAs). Among a large number of electron-accepting (A) building blocks, thiazole (Tz) and its derived fused heterocycles have been widely used to construct photovoltaic materials, especially conjugated polymers. Benefiting from the electron deficiency, rigidity, high planarity, and enhanced intra/intermolecular interactions of Tz-containing heterocycles, some related photovoltaic materials exhibit proper energy levels, optimized molecular aggregation, and active layer morphology, leading to excellent photovoltaic performance. This review focuses on the progress of Tz-based photovoltaic materials in the field of OSCs. First, the Tz-based donor and acceptor photovoltaic materials are reviewed. Then, the materials based on promising Tz-containing heterocycles, mainly including thiazolo[5,4-d]thiazole (TzTz), benzo[1,2-d:4,5-d']bis(thiazole) (BBTz), and benzo[d]thiazole (BTz) are summarized and discussed. In addition, the new emerging Tz-fused structures and their application in OSCs are introduced. Finally, perspectives and outlooks for the further development of Tz-containing heterocycle-based photovoltaic materials are proposed.

Dithienobenzothiadiazole (DTBT)-Based Polymers Enable Organic Solar Cells with Ultrahigh VOC of ≈1.3 V.

Dithieno[3',2':3,4;2",3":5,6]benzo[1,2-c][1,2,5]thiadiazole (DTBT) is a newly emerging building block to construct effective photovoltaic polymers. Organic solar cells (OSCs) based on DTBT-based polymers have realized power conversion efficiency (PCEs) over 18%, despite their relatively low open-circuit voltage (VOC ) of 0.8-0.95 V. To extend the application of DTBT-based polymers in high-voltage OSCs, herein, D18-Cl and PE55 are used to combine with a wide-bandgap non-fullerene acceptor (NFA), BTA3, and achieve ultrahigh VOC of 1.30 and 1.28 V, respectively. Compared with D18-Cl based on tricyclic benzodithiophene (BDT) segment, PE55 containing the pentacyclic dithienobenzodithiophene (DTBDT) unit possesses better hole mobility, higher charge-transfer efficiency, and more desirable phase separation. Hence, PE55:BTA3 blend exhibits a higher efficiency of 9.36% than that of D18-Cl: BTA3 combination (6.30%), which is one of the highest values for OSCs at ≈1.3 V VOC . This work attests that DTBT-based p-type polymers are ideal for the application in high-voltage OSCs.

Continuous Room-Temperature Spin-Injection Modulation Achieved by Spin-Filtering Competition in Molecular Spin Valves.

Abundant spin-related phenomena that originate from interfaces between ferromagnetic electrodes and molecular semiconductors have greatly enriched research in spintronics, and they are considered promising for realizing novel spintronic functionalities in the future. However, despite great effort, the interfacial effect cannot be precisely controlled to achieve steady and predictable functions, especially at room temperature, and this has gradually become a significant bottleneck in the development of molecular spintronics. In this study, an innovative spin-filtering-competition mechanism is proposed to continuously modulate the interfacial effect in molecular spin valves at room temperature. To form this novel mechanism, the original spin-filtering effect from pure cobalt competes with the newly generated one, which is induced by the bonding effect between cobalt and lithium fluoride. Subsequently, by precisely controlling competition through lithium fluoride coverage on the cobalt surface, continuous modulation of the spin-injection process can be successfully achieved at room temperature. Spin polarization of the injected current and magnetoresistance effect can be actively controlled or their sign can be completely reversed through this novel mechanism. This study provides an innovative approach and theory for precisely controlling spin-related interfacial effects, which may further promote the scientific and technological development of spintronics.

Constructing D-π-A Type Polymers as Dopant-Free Hole Transport Materials for High-Performance CsPbI2Br Perovskite Solar Cells.

Hole-transporting materials (HTMs) play a major role in efficient and stable perovskite solar cells (PSCs), especially for CsPbI2Br inorganic PSC. Among them, dopant-free conjugated polymers attract more attention because of the advantages of high hole mobility and high stability. However, the relationship between the polymer structure and the photovoltaic performance is rarely investigated. In this work, we choose three similar D-π-A-type polymers, where the D unit and π-bridge are fixed into benzodithiophene and thiophene, respectively. By changing the A units from classic benzodithiophene-4,8-dione and benzotriazole to quinoxaline, three polymers PBDB-T, J52, and PE61 are utilized as dopant-free HTMs for CsPbI2Br PSCs. The energy levels, hole mobility, and molecular stacking of the three HTMs, as well as charge transfer between CsPbI2Br/HTMs, are fully investigated. Finally, the device based on PE61 HTM obtains the champion power conversion efficiency of 16.72%, obviously higher than PBDB-T (15.13%) and J52 (15.52%). In addition, the device based on PE61 HTM displays the best long-term stability. Those results demonstrate that quinoxaline is also an effective A unit to construct D-π-A-type polymers as HTMs and improve the photovoltaic performance of PSCs.

Modulation of Molecular Stacking via Tuning 2-Ethylhexyl Alkyl Chain Enables Improved Efficiency for All-Small-Molecule Organic Solar Cells.

There is always a dilemma between strong π-π stacking/crystallinity and suitable domain size for all-small-molecule organic solar cells (ASM-OSCs), which puts forward higher requirements for the design of molecular donors. In this work, a series of novel molecular donors with different positional 2-ethylhexy (EH) attachments are designed and synthesized, named SM-R, SM-REH, SM-EH-R, and SM-EH-REH. It is found that EH-substitution on end groups (SM-REH) enables improved π-π interaction and crystallinity but with decreased solubility and phase size, leading to the improved efficiency of 15.6% as compared to 14.0% of SM-R. In contrast, EH-substitution on the π-bridge (SM-EH-R) significantly suppresses π-π stacking and increases the solubility, resulting in the lower efficiency of 11.9%. The further EH-substitution on end-groups of SM-EH-R, namely, SM-EH-REH, recovers the π-π stacking strength and obtains a moderate efficiency of 14.4%. Despite the higher crystallinity and increased π-π stacking in some molecules, the blend films show the gradually decreased domain size in the sequence of SM-R, SM-REH, SM-EH-R, and SM-EH-REH owing to the steric hindrance of the EH-chain. Overall, this work indicates that obtaining the higher π-π stacking/crystallinity and decreased domain size is achievable by tuning the EH-chain substitution, which paves the way to further improve the photovoltaic performance of ASM-OSCs.

Improving the Photovoltaic Performance of Dithienobenzodithiophene-Based Polymers via Addition of an Additional Eluent in the Soxhlet Extraction Process.

Dithieno[2,3-d;2',3'-d']benzo[1,2-b;4,5-b']dithiophene (DTBDT) is a kind of pentacyclic aromatic electron-donating unit with unique optoelectronic properties, but it has received less attention in the design of photovoltaic polymers. In this work, we copolymerized DTBDT with the electron-deficient unit of dithieno[3',2':3,4;2″,3″:5,6]benzo[1,2-c][1,2,5]thiadiazole (DTBT) and obtained two polymers, PE55 and PE56, with a synergistic heteroatom substitution strategy. When blended with the classic nonfullerene acceptor Y6, PE55 and PE56 achieve power conversion efficiencies (PCEs) of 13.78% and 14.49%, respectively, which indicates that the introduction of sulfur atoms on the conjugated side chain of the D unit is a promising method to enhance the performance of DTBDT-based polymers. Besides, we utilize dichloromethane and chloroform to separate the low molecular weight (Mw) fractions in the solvent extraction process to obtain PE55-CF and PE56-CB, and the PCEs are further improved to 15.00% and 16.11%, respectively. The stronger π-π stacking, optimized blend film morphology, and higher charge mobilities contribute to the enhanced PCEs for polymers with higher Mw obtained via the multistep solvent extraction strategy. Our results not only provide a simple and effective way to improve the photovoltaic performance of conjugated polymers but also imply that some reported polymers purified from the traditional one-step solvent extraction method might be seriously underestimated.

Asymmetric chlorination of A2-A1-D-A1-A2 type non-fullerene acceptors for high-voltage organic photovoltaics.

Herein, we synthesized an asymmetric A2-A1-D-A1-A2 type small molecule nonfullerene acceptor (NFA), HCl-BTA3, by chlorination on one side of A1. The synergistic effect of the asymmetric structure and chlorination endows HCl-BTA3 with a large dipole moment, close molecular packing, and high-efficiency charge transfer and transport. After being blended with a carboxylate-based polymer donor, TTC-Cl, HCl-BTA3 achieved a high open-circuit voltage (VOC) of 1.20 V and a satisfactory power conversion efficiency (PCE) of 11.2%, which are among the highest values for high-voltage carboxylate-based polymers.

Organic Photovoltaic Cells Based on Nonhalogenated Polymer Donors and Nonhalogenated A-DA'D-A-Type Nonfullerene Acceptors with High VOC and Low Nonradiative Voltage Loss.

Compared with other all-inorganic/organic-inorganic hybrid solar cells, the large voltage loss (Vloss) of organic photovoltaic (OPV) cells, especially the nonradiative voltage loss (ΔVnonrad), limited the further improvement of performance. Although A-DA'D-A-type Y-series nonfullerene acceptors (NFAs) largely improve the power conversion efficiencies (PCEs) to 18%, the open-circuit voltage (VOC) of this kind of material was still restricted to below 1.0 V. Herein, we designed and synthesized a narrow bandgap (Eg = 1.41 eV) acceptor BTA77 with an A-DA'D-A-type backbone containing a nonhalogenated terminal group to achieve high electroluminescence efficiency and high VOC. Combined with the nonhalogenated polymer PBDB-T with a conjugated thiophene side chain, BTA77 realized a VOC of 0.944 V, a Vloss of 0.552 V, and a PCE of 13.75%, which is one of the highest PCEs based on nonhalogenated A-DA'D-A-type acceptors with VOC > 0.9 V. After further blending with the nonhalogenated donor polymer PBT1-C with a conjugated phenyl side chain, the VOC increases to 1.021 V with a super low ΔVnonrad of 0.14 V owing to the greatly improved electroluminescence external quantum efficiency (EQEEL) of 4.42 × 10-3. Our results indicate that there is still a large room to decrease the ΔVnonrad and increase VOC by synergistic molecular engineering of p-type polymers and n-type small molecules.