Correction: Single molecule magnet features in luminescent lanthanide coordination polymers with heptacoordinate Dy/Yb(III) ions as nodes.

Correction for 'Single molecule magnet features in luminescent lanthanide coordination polymers with heptacoordinate Dy/Yb(III) ions as nodes' by Xiang-Tao Dong et al., Dalton Trans., 2023, 52, 12686-12694, https://doi.org/10.1039/D3DT02106H.

Single molecule magnet features in luminescent lanthanide coordination polymers with heptacoordinate Dy/Yb(III) ions as nodes.

Two sets of 1D/2D lanthanide coordination polymers with formulas of Ln(oqa)3·2H2O [Hoqa = 2-(4-oxoquinolin-1(4H)-yl) acetic acid, Ln = Dy (1), Yb (2)] and Ln(oaa)2(HCOO)(H2O) [Hoaa = 2-(9-oxoacridin-10(9H)-yl) acetic acid, Ln = Dy (3), Yb (4)] have been synthesized and their physical properties were investigated. All four complexes are constructed from seven-coordinate lanthanide ions and corresponding organic linkers. The lanthanide ions in 1 and 2 adopt a pentagonal bipyramid coordination geometry, whereas the coordination geometry of lanthanide ions in 3 and 4 can be described as a capped octahedron. Slow magnetic relaxation behaviors were observed in these four products at a zero/non-zero static magnetic field. Complexes 1, 2 and 4 exhibit the characteristic emission of Ln(III) ions, whereas complex 3 shows ligand-based emission. Bright yellow light emission was also observed when a voltage was applied, demonstrating the potential of 1 for application in light-emitting diodes (LEDs). Compounds 3 and 4 are the first examples of lanthanide complexes based on Hoaa ligands.

Habitat fragmentation influences gene structure and gene differentiation among the Loxoblemmus aomoriensis populations in the Thousand Island Lake.

Thousand Island Lake (TIL) is a fragmented landscape consisting of more than 1000 land-bridge islands isolated during reservoir formation. To evaluate the effects of fragmentation and island attributes on insect populations, we examined the genetic structure of Loxoblemmus aomoriensis, a species of cricket widely distributed in TIL, and compared genetic diversity between islands samples. Population genetic analyses was conducted based on mitochondrial DNA haplotype frequencies of 10 sample islands. By comparing three island attributes with population genetic diversity reveals that island area influenced population genetic diversity (r2 = 0.5094, p = 0.00204). Using Pairwise Fst values, we also found that long-distance isolation increased the genetic differentiation, while short-distance isolation can be offset by dispersal. These results indicate that fragmentation can impact populations on a genetic level.

[Individualized restorative designs and clinical evaluation for dental implants in the anterior esthetic zone with inappropriate conditions].

PURPOSE: To offer individualized restorative strategies for patients receiving dental implants in the anterior esthetic zone but with inappropriate available conditions and evaluate the clinical outcomes. METHODS: Forty-six patients with 58 implants were recruited for the study in accordance with the criteria and received individualized implant prostheses in the anterior esthetic zone. The patients were followed up for 3-24 months, and the clinical outcomes were evaluated by pink and white esthetic scores (PES/WES). RESULTS: The patients were from 18 to 69 years old, and followed up for 12.6 months in average. According to the third month follow-up esthetic scores, for PES, 1.72% of the patients got low scores, 44.83% got medium scores and 53.45% got high scores; For WES, 0% got low scores, 20.69% got medium scores and 79.31% got high scores. No implant failure or peri-implantitis occurred. CONCLUSIONS: Individualized restorative designs for implants in the esthetic zone can effectively improve the appearance of the prostheses which originally have no appropriate available space. Close follow-up and monitoring of the peri-implant soft tissue and proper oral hygiene instructions are important to ensure the conditions of the prostheses.

MR lymphangiography at 3.0 Tesla to assess the function of inguinal lymph node in low extremity lymphedema.

PURPOSE: To assess the function of inguinal lymph node (ILN) in low extremity lymphedema (LEL) with dynamic enhanced MR lymphangiography (MRL). MATERIALS AND METHODS: Sixty-four patients with clinically diagnosed LEL underwent MRL examinations. The lymph drainage patterns were separated into four subtypes. The peak time to enhancement and the contrast ratio of the ILN were calculated 35 min following contrast agent administration. RESULTS: Dilated lymphatic vessels could be observed in all subjects. Type I-IV drainage patterns were observed 25% (16/64), 45.31% (29/64), 17.19% (11/64), and 12.5% (8/64), respectively. The ILN in the edematous limbs could be observed in 93.75% (60/64) of subjects. The peak time to enhancement was correlated with clinical stages (P < 0.001) of the disease, lymph drainage patterns (P < 0.001), and the duration of lymphedema (P < 0.001). The contrast ratios were significantly different at each time point (P < 0.001) and significantly correlated with the lymphatic drainage patterns (P < 0.001). CONCLUSION: MRL could provide useful information for evaluating the functional status of the ILN. Data presented here demonstrate that the functionality of the ILN is related to the clinical stage of the disease, lymphatic drainage patterns, and the duration of lymphedema.

XPS and electrochemical impedance spectroscopy studies on effects of the porcelain firing process on surface and corrosion properties of two nickel-chromium dental alloys.

The aim of this study was to evaluate the effects of a simulated porcelain firing process on the surface, corrosion behavior and cell culture response of two nickel-chromium (Ni-Cr) dental alloys. A Be-free alloy and a Be-containing alloy were tested. Before porcelain firing, as-cast specimens were examined for surface composition using X-ray photoelectron spectroscopy and metallurgical phases using X-ray diffraction. Corrosion behaviors were evaluated using electrochemical impedance spectroscopy. 3T3 fibroblasts were cultured and exposed indirectly to specimens. MTT assays were counted after 3 and 6 days. The cell culture mediums exposed to specimens were analyzed for metal ion release. After porcelain firing, similar specimens were examined for the same properties. In both as-cast and fired conditions, the Be-free Ni-Cr alloy showed significantly more resistance to corrosion than the Be-containing Ni-Cr alloy, which exhibited BeNi phase. After porcelain firing, the corrosion resistance of the Be-free Ni-Cr alloy decreased statistically, corresponding with evident decreases of Cr and Ni oxides on the alloy surface. Also, the alloy's MTT assay decreased significantly corresponding with an obvious increase of Ni-ion release after the firing. For the Be-containing Ni-Cr alloy, the firing process led to increases of surface oxides and metallic Be, while its corrosion resistance and cell culture response were not significantly changed after porcelain firing. The results suggested that the corrosion resistance and biocompatibility of the Be-free Ni-Cr alloy decreased after porcelain firing, whereas the firing process had little effect on the same properties of the Be-containing Ni-Cr alloy.

[Application of apparent diffusion coefficient ratio in the diagnosis of bladder cancer grading pre-operation].

OBJECTIVE: To explore the value of apparent diffusion coefficient (ADC) ratio in the diagnosis of bladder cancer pre-operation by analyzing its differences among different grades of bladder cancer. METHODS: A total of 52 cases of bladder cancer were all definitely diagnosed with histological results.Routine examinations of magnetic resonance imaging (MRI) and diffusion-weighted imaging (DWI) were performed preoperatively on each patient. ADC map was constructed in work station and ADC values of tumor and internal obturator muscle were measured (b = 800 s/mm(2)).Ratio of ADC was calculated with internal obturator muscle as reference site. Then the relationship between ADC ratio and bladder cancer grade was analyzed. RESULTS: Mean ratio of ADC of all tumors was 0.98±0.35, G1 (1.12±0.21) and G2 (0.67±0.29), the sensitivity and specificity of ADC ratio was 90.2% and 85.3% respectively with an optimal threshold of 0.96. The ratios of ADC of low-grade group were significantly higher than those of high-grade group while the values of non-muscle-invasive group were significantly higher than those of muscle-invasive group. The ratios of ADC of tumor were inversely associated with the malignancy degree of bladder cancer (r = -0.845, P < 0.05). CONCLUSION: The ratio of ADC of bladder cancer reflects the lesion tissue properties. And its measurement plays an important role in the diagnosis of bladder cancer grading pre-operation.

Nonlinear finite element analysis of three implant- abutment interface designs.

The objective of this study was to investigate the mechanical characteristics of implant-abutment interface design in a dental , using nonlinear finite element analysis (FEA) method. This finite element simulation study was applied on three commonly used commercial dental implant systems: model I, the reduced-diameter 3i implant system (West Palm Beach, FL, USA) with a hex and a 12-point double internal hexagonal connection; model II, the Semados implant system (Bego, Bremen, Germany) with combination of a conical (450 taper) and internal hexagonal connection; and model III, the Brinemark implant system (Nobel Biocare, Gothenburg,Sweden) with external hexagonal connection. In simulation, a force of 170 N with 45" oblique to the longitudinal axis of the implant was loaded to the top surface of the abutment. It has been found from the strength and stiffness analysis that the 3i implant system has the lowest maximum von Mises stress, principal stress and displacement while the Br Bnemark implant system has the highest. It was concluded from our preliminary study using nonlinear FEA that the reduced-diameter 3i implant system with a hex and a 12-point double internal hexagonal connection had a better stress distribution, and produced a smaller displacement than the other two implant systems.

Altered disease development in the eui mutants and Eui overexpressors indicates that gibberellins negatively regulate rice basal disease resistance.

Gibberellins (GAs) form a group of important plant tetracyclic diterpenoid hormones that are involved in many aspects of plant growth and development. Emerging evidence implicates that GAs also play roles in stress responses. However, the role of GAs in biotic stress is largely unknown. Here, we report that knockout or overexpression of the Elongated uppermost internode (Eui) gene encoding a GA deactivating enzyme compromises or increases, respectively, disease resistance to bacterial blight (Xanthomonas oryzae pv. oyrzae) and rice blast (Magnaporthe oryzae). Exogenous application of GA(3) and the inhibitor of GA synthesis (uniconazol) could increase disease susceptibility and resistance, respectively, to bacterial blight. Similarly, uniconazol restored disease resistance of the eui mutant and GA(3) decreased disease resistance of the Eui overexpressors to bacterial blight. Therefore, the change of resistance attributes to GA levels. In consistency with this, the GA metabolism genes OsGA20ox2 and OsGA2ox1 were down-regulated during pathogen challenge. We also found that PR1a induction was enhanced but the SA level was decreased in the Eui overexpressor, while the JA level was reduced in the eui mutant. Together, our current study indicates that GAs play a negative role in rice basal disease resistance, with EUI as a positive modulator through regulating the level of bioactive GAs.