RESUMO
Taking advantage of the strong adsorption characteristics of coffee grounds (CGs) and coffee ground biochar (CGB), this research employed equal amounts of 2%, 4%, 6%, and 8% CGs and CGB to replace cement. This study thereby examined the impacts of CGs and CGB on cement compressive strength, as well as their abilities to adsorb chloride ions and formaldehyde. X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG-DTG), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were employed to investigate the hydration mechanism and characterize the microscopic structure. The results show the following: (1) The presence of a substantial quantity of organic compounds in CGs is found to have an adverse effect on both the compressive strength and hydration degree of the sample. The use of CGB after high-temperature pyrolysis of phosphoric acid can effectively improve the negative impact of organic compounds on the sample. (2) The addition of CGs reduces the adsorption of chloride ions by cement, primarily due to the presence of fewer hydration products. However, when CGB was incorporated into cement, it enhanced the ability to adsorb chloride ions. (3) Cement containing 8% CGB content can slightly enhance the adsorption of formaldehyde. However, the cement sample with 8% CGB content exhibited the most significant ability to adsorb formaldehyde.
RESUMO
In this paper, the thermal-related stress-strain behavior of alkali-activated slag (AAS) concretes, with different alkali concentrations and moduli, was studied under compression. After exposure to high temperatures (200 °C, 400 °C, 600 °C, 800 °C, and 1000 °C), a compression test was carried out on the specimens. The stress-strain relationship, axial compressive strength, and elastic modulus were expressed using both a displacement extensometer and the digital image correlation (DIC) technique. It was mainly determined that: (1) With the increase in temperature, the stress-strain curves of the AAS concretes tended to be flattened, indicating reductions in both axial compressive strength and elastic modulus. After 1000 °C, only 2.5-3.7% axial compressive strength and 1.4-3.9% elastic modulus remained, respectively. (2) The DIC technique was used for thermal strain measurements of the AAS concrete. Compared to the traditional extensometer, DIC yielded a small error of 4.5% and 7.2% for axial compressive strength and elastic modulus measurements, respectively. The strain cloud chart obtained from DIC was helpful for monitoring the damage process of the specimens. The findings of this paper refined scientific systems of AAS concrete under thermal action, and also provided a newly non-contact approach for thermal strain measurements of AAS concrete under compression.
