A photo-degradable BODIPY-modified Ru(II) photosensitizer for safe and efficient PDT under both normoxic and hypoxic conditions.

Photodynamic therapy (PDT) is promising for cancer treatment but still suffers from some limitations. For instance, PDT based on 1O2 generation (in a type-II mechanism) is heavily dependent on high oxygen concentrations and will be significantly depressed in hypoxic tumors. In addition, the residual photosensitizers after PDT treatment may cause severe side-effects under light irradiation. To solve these problems, herein a BODIPY (boron dipyrromethene)-modified Ru(II) complex [Ru(dip)2(tpy-BODIPY)]2+ (complex 1, dip = 4,7-diphenyl-1,10-phenanthroline, tpy = 2,2':6',2''-terpyridine) was designed and synthesized. Complex 1 exhibited both high singlet oxygen quantum yield (Φ = 0.7 in CH3CN) and excellent superoxide radical (O2˙-) generation, and thus demonstrated efficient PDT activity under both normoxic and hypoxic conditions. Moreover, complex 1 is photo-degradable in water, and greatly loses its ROS generation ability after PDT treatment. These novel properties of complex 1 make it promising for efficient PDT under both normoxic and hypoxic conditions with reduced side-effects.

Nitroreductase-Responsive Photosensitizers for Selective Imaging and Photo-Inactivation of Intracellular Bacteria.

Intracellular Staphylococcus aureus (S. aureus), especially the methicillin resistant staphylococcus aureus (MRSA), are difficult to detect and eradicate due to the protection by the host cells. Antibacterial photodynamic therapy (aPDT) offers promise in treating intracellular bacteria, provided that selective damage to the bacteria ranther than host cells can be realized. According to the different nitroreductase (NTR) levels in mammalian cells and S. aureus, herein NTR-responsive photosensitizers (PSs) (T)CyI-NO2 were designed and synthesized. The emission and 1O2 generation of (T)CyI-NO2 are quenched by the 4-nitrobenzyl group, but can be specifically switched on by bacterial NTR. Therefore, selective imaging and photo-inactivation of intracellular S. aureus and MRSA were achieved. Our findings may pave the way for the development of more efficient and selective aPDT agents to combat intractable intracellular infections.

TiO2 compact layer induced charge transfer enhancement in a three-dimensional TiO2-Ag array SERS substrate for quantitative and multiplex analysis.

A highly sensitive and uniform surface-enhanced Raman scattering (SERS) substrate is the guarantee for reliable quantitative analysis. Herein, a three-dimensional TiO2-Ag SERS substrate was prepared by growing a TiO2 nanorods (NRs) array on a TiO2 compact layer (c-TiO2), followed by modification with Ag nanoparticles (AgNPs). The synergy between the c-TiO2, semiconductor TiO2 NRs and the plasmonic AgNPs collaboratively endowed it with high sensitivity, in which c-TiO2 effectively blocked the recombination of electrons and holes, and the charge transfer enhancement contributed 10-fold improvement over that without the c-TiO2 substrate. Besides the high sensitivity, the TiO2-Ag hybrid array SERS substrate also showed quantitative and multi-component detecting capability. The limit of detection (LOD) for crystal violet (CV) was determined to be 10-9 M even with a portable Raman instrument. The TiO2-Ag composite structure was extended to detect organic pesticides (thiram, triazophos and fonofos), and the LODs for thiram, triazophos and fonofos were measured to be 10-7 M, 10-7 M and 10-6 M, respectively. In addition, the realistic simulation detecting pesticide residues for a real sample of dendrobium was demonstrated. The sensitive, quantitative and multiplex analysis of the TiO2-Ag hybrid array substrate indicated its great potential in the rapid detection of pesticide residues in real samples.

Ru(II) Complexes with Enaminone Structures for Rapid Sterilization of Staphylococcus aureus and MRSA with Little Accumulation of Drug Resistance.

Drug-resistant bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA), pose a serious threat to human life. Therefore, there is urgent need to develop antibiotics with new chemical structures and antibacterial mechanisms, especially those that elicit little drug resistance after long-term use. Herein we synthesized three novel ruthenium complexes (Ru1-Ru3) containing the enaminone structures for the first time. At a concentration of 5 µM, Ru1-Ru3 can lead to a CFU reduction of about 5 log units towards S. aureus and MRSA. Interestingly, Ru3 displayed rapid bactericidal effects and could decrease the CFU numbers of both pathogens by 5 log units within 40 min. The control compounds (Ru4 and Ru5) without the enaminone structures displayed very poor antibacterial activity under the same conditions. Moreover, S. aureus did not show apparent drug resistance towards Ru3 after 20 passages incubation with a sublethal concentration. These results highlight the critical role of enaminone structures for antibacterial applications.

Modified lignin: Preparation and use in reversible gel via Diels-Alder reaction.

In this study, popular soda lignin was modified with either furan or maleimide ring, and the modified lignins were subjected to reversible Diels-Alder reaction. A new process was proposed to prepare the functionalized lignin. A long chain was introduced to the hydroxyl groups of lignin, and then either the furan or maleimide ring was added to the other end of the chain. The test results confirmed that either the furan ring or the maleimide ring was bound to lignin. Furan- and maleimide-functionalized lignins were also combined to generate crosslinking via Diels-Alder [4+2] cycloaddition reaction. Under appropriate conditions, the formation of a gel was identified, which reverted to liquid state after retro Diels-Alder reaction upon heating at 120°C. This study reveals the significant versatility and potential of the developed strategy for the utilization of lignin-based recyclable networks.

High-value utilization of eucalyptus kraft lignin: Preparation and characterization as efficient dye dispersant.

The dark color of industrial lignin is the main obstacle for their high value-added use in areas such as dyestuff dispersants. A kind of light-colored lignosulfonate with favorable dispersibility and remarkable stain resistance is prepared using fractionated eucalyptus kraft lignin. The fractionated lignins named as D (insoluble part) and X (soluble part) and sulfonated lignin fractions named as SD and SX are characterized by FTIR spectroscopy, 1H NMR spectroscopy, GPC and brightness test. The results reveal that fraction X presents a lower molecular weight but a higher hydroxyl content than that of fraction D, which lead to the differences on the SO3H content, dispersibility and color performance of SD and SX. The sulfonated fractions perform a similar molecular weight to that of unsulfonated lignins and show light color due to the phenolic hydroxyl blocking of 1,4-BS (1,4-butane sultone) and the postprocessing of sodium borohydride. The SX that performs the best of all exhibits obvious decrease on phenolic hydroxyl groups and increase on brightness value which is improved by 85.8% compared with control sample. The SX reaches the highest level (grade 5) in the dispersibility test and presents remarkable stain resistance on different textiles, especially on the dacron and cotton.

Color reduction of sulfonated eucalyptus kraft lignin.

Several eucalyptus lignins named as HSL, SML and BSL were prepared by high temperature sulfonation, sulfomethylation, butane sultone sulfonation respectively. The color properties of samples were investigated. Under optimized conditions the sulfonic group (SO3H) content of HSL, SML and BSL reached 1.52, 1.60 and 1.58mmol/g, respectively. Samples were characterized by UV-vis spectroscopy, FTIR spectroscopy, 1H NMR spectroscopy, GPC and brightness test, respectively. The results revealed that BSL performed a higher molecular weight and lighter color due to the phenolic hydroxyl blocking by 1,4-butane sultone (1,4-BS). The color reduction of sodium borohydride treated BSL (labeled as SBSL) was further enhanced and the brightness value was improved by 76.1% compared with the darkest HSL. SBSL process was much better than HSL and SML process. Hydroxyl blocking effect of 1,4-BS and reducibility of sodium borohydride played important roles in the color reduction of sulfonated eucalyptus kraft lignin.

Polyaniline/cellulose fiber composite prepared using persulfate as oxidant for Cr(VI)-detoxification.

Cellulose fibers were engineered by in situ oxidative polymerization of aniline using ammonium persulfate as oxidant/initiator. The polyaniline/cellulose fiber composite was used for the treatment of Cr(VI)-contaminated water, and its effect was evaluated. Under the conditions studied, the composite exhibited very high water detoxification efficiency, as a result of reduction of Cr(VI) to Cr(III) in combination with adsorption of the Cr(III) onto the cellulosic substrate. Cellulose fibers used in the study served two purposes simultaneously, i.e., carrier of polyaniline and the adsorbent for Cr(III). The complexation of polyaniline with cellulose fibers provided synergistic effects on Cr(VI)-detoxification.

An integrated approach for Cr(VI)-detoxification with polyaniline/cellulose fiber composite prepared using hydrogen peroxide as oxidant.

In this short communication, the demonstration of a new integrated process concept involving the use of a bio-based material for detoxification of Cr(VI)-contaminated water is presented. Specifically, the bio-based material is a polyaniline/cellulose fiber composite prepared by in situ polymerization of aniline in the presence of cellulose fibers, using the industrially favorable hydrogen peroxide (instead of costly oxidants such as ammonium persulfate) as the oxidant. Ferric chloride was used to catalyze the polymerization reaction. The process conditions for the preparation of the composite were preliminarily optimized, and the proposed concept was demonstrated. Under the conditions studied, the use of the composite was quite effective in the detoxification of the model solution. The proposed concept may serve as an alternative approach for water treatment using renewable materials.