Study on the performance and mechanism of cobaltous ion removal from water by a high-efficiency strontium-doped hydroxyapatite adsorbent.

In this study, a high-efficiency strontium-doped hydroxyapatite (Sr-HAP) adsorbent was synthesized by a sol-gel method for removing cobaltous ions (Co(II)) from water. The effects of adsorbent dose, initial solution pH, initial Co(II) concentration and temperature on the removal performance of Co(II) were investigated. Experimental results indicated that the optimum Sr-HAP dose was 0.30 g/50 mL solution, the Sr-HAP adsorbent could effectively remove Co(II) in a wide pH range of 3-8. Increasing temperature was conducive to the adsorption, and the maximum Co(II) adsorption capacity by Sr-HAP reached 48.467 mg/g at 45 °C. The adsorption of Co(II) followed the pseudo-second-order kinetic model, indicating that the Co(II) adsorption by Sr-HAP was attributed mainly to chemisorption. The isothermal adsorption results showed that at lower Co(II) equilibrium concentration, the Langmuir model fitted the data better than the Freundlich model but opposite at higher Co(II) equilibrium concentration. Therefore, the adsorption of Co(II) was a process from monolayer adsorption to multilayer adsorption with the increase of the Co(II) equilibrium concentration. The diffusion analysis of Co(II) to Sr-HAP indicated that the internal diffusion and surface adsorption were the rate-controlled steps of Co(II) adsorption. Thermodynamic study demonstrated that the Co(II) adsorption process was spontaneous and endothermic. The mechanism study revealed that in addition to chemisorption, Sr-HAP also removed Co(II) ions from water via ion exchange and surface complexation.

Optical feedback noise-immune cavity-enhanced optical heterodyne molecular spectrometry for sub-Doppler-broadened detection of C2H2: publisher's note.

This publisher's note contains a correction to Opt. Lett.49, 202 (2024)10.1364/OL.507004.

Enhancing CO2 capture of an aminoethylethanolamine-based non-aqueous absorbent by using tertiary amine as a proton-transfer mediator: From performance to mechanism.

Non-aqueous absorbents (NAAs) have attracted increasing attention for CO2 capture because of their great energy-saving potential. Primary diamines which can provide high CO2 absorption loading are promising candidates for formulating NAAs but suffer disadvantages in regenerability. In this study, a promising strategy that using tertiary amines (TAs) as proton-transfer mediators was proposed to enhance the regenerability of an aminoethylethanolamine (AEEA, diamine)/dimethyl sulfoxide (DMSO) (A/D) NAA. Surprisingly, some employed TAs such as N,N-diethylaminoethanol (DEEA), N,N,N',N'',N''-pentamethyldiethylenetriamine (PMDETA), 3-dimethylamino-1-propanol (3DMA1P), and N,N-dimethylethanolamine (DMEA) enhanced not only the regenerability of the A/D NAA but also the CO2 absorption performance. Specifically, the CO2 absorption loading and cyclic loading were increased by about 12.7% and 15.5%-22.7%, respectively. The TA-enhanced CO2 capture mechanism was comprehensively explored via nuclear magnetic resonance technique and quantum chemical calculations. During CO2 absorption, the TA acted as an ultimate proton acceptor for AEEA-zwitterion and enabled more AEEA to form carbamate species (AEEACOO-) to store CO2, thus enhancing CO2 absorption. For CO2 desorption, the TA first provided protons directly to AEEACOO- as a proton donor; moreover, it functioned as a proton carrier and facilitated the low-energy step-wise proton transfer from protonated AEEA to AEEACOO-. Consequently, the presence of TA made it easier for AEEACOO- to obtain protons to decompose, resulting in enhanced CO2 desorption. In a word, introducing the TA as a proton-transfer mediator into the A/D NAA enhanced both the CO2 absorption performance and the regenerability, which was an efficient way to "kill two birds with one stone".

Adsorption of high-temperature CO2 by Ca2+/Na+-doped lithium orthosilicate: characterization, kinetics, and recycle.

High-temperature solid adsorbent Li4SiO4 has received broad attention due to its high theoretical adsorption capacity, high regeneration capacity, and wide range of raw materials for preparation. In this paper, a Li4SiO4 adsorbent was prepared by MCM-48 as the silica precursor and modified by doping with metal ions (Ca2+ and Na+) for high-temperature capture of low-concentration CO2. The results showed that the surface of the Ca-doped (or Na-doped) Li4SiO4 adsorbent developed some particles that are primarily composed by Li2CaSiO4 (or Li3NaSiO4). Furthermore, the grains of the adsorbents became finer, effectively increasing the specific surface area and enhancing adsorption performance. Under 15 vol% CO2, the maximum CO2 adsorption was 25.63 wt% and 32.86 wt% when the Ca2+ doping amount was 0.06 and the Na+ doping amount was 0.12, respectively. These values were both higher than the adsorption capacity before the metal ion doping. After 10 adsorption/desorption cycles, the adsorption capacity of Na-doped Li4SiO4 increased by 9.68 wt%, while that of Ca-doped Li4SiO4 decreased by 7.98 wt%. This difference could be attributed to the easy sintering of the Ca-containing adsorbent. Furthermore, a biexponential model was used to fit the CO2 adsorption curve of the adsorbent in order to study the adsorption kinetics. Compared to the conventional Li4SiO4, the Ca/Na-doped adsorbent offers several advantages, such as a high CO2 adsorption capacity and stable cycling ability.

Optical feedback noise-immune cavity-enhanced optical heterodyne molecular spectrometry for sub-Doppler-broadened detection of C2H2.

A novel, to the best of our knowledge, noise-immune cavity-enhanced optical heterodyne molecular spectrometry (NICE-OHMS) has been developed, utilizing optical feedback for laser-to-cavity locking with a common distributed-feedback diode laser. The system incorporates active control of the feedback phase and feedforward control of the laser current, allowing for consecutive laser frequency detuning by scanning a piezoelectric transducer (PZT) attached to the cavity. To enhance the fidelity of the spectroscopic signal, wavelength-modulated (wm) NICE-OHMS is implemented. Benefiting from the optical feedback, a modulation frequency of 15 kHz is achieved, surpassing the frequencies typically used in traditional NICE-OHMS setups. Then, the sub-Doppler-broadened wm-NICE-OHMS signal of acetylene at 1.53 µm is observed. A seven-fold improvement in signal to noise ratio has been demonstrated compared to NICE-OHMS alone and a limit of detection of 6.1 × 10-10cm-1 is achieved.

Performance and mechanism analysis of sludge-based biochar loaded with Co and Mn as photothermal catalysts for simultaneous removal of acetone and NO at low temperature.

Replacing NH3 in NH3-SCR with VOCs provides a new idea for the simultaneous removal of VOCs and NOx, but the technology still has urgent problems such as high cost of catalyst preparation and unsatisfactory catalytic effect in the low-temperature region. In this study, biochar obtained from sewage sludge calcined at different temperatures was used as a carrier, and different Co and Mn injection ratios were selected. Then, a series of sludge-based biochar (SBC) catalysts were prepared by a one-step hydrothermal synthesis method for the simultaneous removal of acetone and NO in a low-temperature photothermal co-catalytic system with acetone replacing NH3. The characterization results show that heat is the main driving force of the reaction system, and the abundance of Co and Mn atoms in high valence states, surface-adsorbed oxygen, and oxygen lattice defects in the catalyst are the most important factors affecting the performance of the catalyst. The performance test results showed that the optimal pyrolysis temperature of sludge was 400 °C, the optimal dosing ratio of Co and Mn was 4:1, and the catalyst achieved 42.98% and 52.41% conversion of acetone and NO, respectively, at 240 °C with UV irradiation. Compared with the pure SBC without catalytic effect, the SBC loaded with Co and Mn gained the ability of simultaneous removal of acetone and NO through the combined effect of multiple factors. The key reaction steps for the catalytic conversion of acetone and NO on the catalyst surface were investigated according to the Mars-van Krevelen (MvK) mechanism, and a possible mechanism was proposed. This study provides a new strategy for the resource utilization of sewage sludge and the preparation of photothermal catalysts for the simultaneous removal of acetone and NO at low cost.

Accuracy of the Yakebot dental implant robotic system versus fully guided static computer-assisted implant surgery template in edentulous jaw implantation: A preliminary clinical study.

AIMS: To compare the accuracy of the Yakebot dental implant robotic system with that of fully guided static computer-assisted implant surgery (CAIS) template in edentulous implantation. MATERIALS AND METHODS: Thirteen patients with edentulous were recruited and divided into two groups: the Yake robotic system group (experimental) (n = 5) and the CAIS group (control) (n = 8). Postoperative cone-beam computed tomography (CBCT) was performed immediately, and the 3-dimensional positions of implants were obtained and compared with that in the preoperative design. The comparison showed platform, apical, depth, and angular deviations. A value of p < 0.05 was considered statistically significant. RESULTS: A total of 84 implants (36 in the robotic group and 48 in the CAIS group) were placed. The mean deviation at the implant platform, apex, depth, and angle in the CAIS group was 1.37 ± 0.72 mm, 1.28 ± 0.68 mm, 0.88 ± 0.47 mm, and 3.47 ± 2.02°, respectively. However, the mean deviation at the implant platform, apex, depth, and angle in the robotic group was 0.65 ± 0.25 mm, 0.65 ± 0.22 mm, 0.49 ± 0.24 mm, and 1.43 ± 1.18°, respectively. Significant differences in the four types of deviation (p < 0.05) between the two groups were observed. CONCLUSION: The accuracy of robotic system in edentulous implant placement was superior to that of the CAIS template, suggesting that robotic system is more accurate, safe, and flexible, can be considered a promising treatment in clinical practice.

A new method regulates bone fracture tissue exosome lncRNA-mRNA to promote mesenchymal stem cell proliferation and migration.

Post-injury adaptation (PIA) is a simple and convenient method to promote bone healing, but its mechanism is unclear. This study was to discuss the role of fracture site tissue exosomes lncRNAs-mRNAs networks on PIA promoting bone mesenchymal stem cells (BMSCs) proliferation and migration. Firstly, the effects of PIA accelerating BMSCs proliferation and migration were confirmed by rat fracture model and bone fracture environment in vitro. Besides, the fracture site tissue exosomes were isolated and authenticated. Then the tissue exosomes were the key factor in PIA promoting BMSCs proliferation and migration authenticated by in vitro and in vivo experiments. The high throughput sequencing and RT-PCR were used to analyze the tissue exosomes lncRNAs-mRNAs networks. It was found that PIA treatment upregulated 118 lncRNAs, 295 mRNAs, and downregulated 111 lncRNAs, 2706 mRNAs in tissue exosomes. A total 12,211 genes were the target genes. Akt1, Actb and Uba52 were the hub mRNAs in tissue exosomes. In additions, tissue-derived exosomes of PIA treated rats upregulated 49 genes, 3 lncRNAs and downregulated 28 genes, 1 lncRNA in BMSCs. Kif11 was the hub gene. Overall, PIA promoted BMSCs proliferation and migration in the early stage of fracture healing, which was closely related to the fracture site tissue exosomes. Akt1, Actb and Uba52 were the hub mRNAs in the exosomes. Besides, Kif11 might be the key gene in BMSC regulated by tissue-derived exosomes of PIA treated rats.

Understanding household-level risk factors for zero dose immunization in 82 low- and middle-income countries.

INTRODUCTION: In 2021, an estimated 18 million children did not receive a single dose of routine vaccinations and constitute the population known as zero dose children. There is growing momentum and investment in reaching zero dose children and addressing the gross inequity in the reach of immunization services. To effectively do so, there is an urgent need to characterize more deeply the population of zero dose children and the barriers they face in accessing routine immunization services. METHODS: We utilized the most recent DHS and MICS data spanning 2011 to 2020 from low, lower-middle, and upper-middle income countries. Zero dose status was defined as children aged 12-23 months who had not received any doses of BCG, DTP-containing, polio, and measles-containing vaccines. We estimated the prevalence of zero-dose children in the entire study sample, by country income level, and by region, and characterized the zero dose population by household-level factors. Multivariate logistic regressions were used to determine the household-level sociodemographic and health care access factors associated with zero dose immunization status. To pool multicountry data, we adjusted the original survey weights according to the country's population of children 12-23 months of age. To contextualize our findings, we utilized United Nations Population Division birth cohort data to estimate the study population as a proportion of the global and country income group populations. RESULTS: We included a total of 82 countries in our univariate analyses and 68 countries in our multivariate model. Overall, 7.5% of the study population were zero dose children. More than half (51.9%) of this population was concentrated in African countries. Zero dose children were predominantly situated in rural areas (75.8%) and in households in the lowest two wealth quintiles (62.7%) and were born to mothers who completed fewer than four antenatal care (ANC) visits (66.5%) and had home births (58.5%). Yet, surprisingly, a considerable proportion of zero dose children's mothers did receive appropriate care during pregnancy (33.5% of zero dose children have mothers who received at least 4 ANC visits). When controlled for other factors, children had three times the odds (OR = 3.00, 95% CI: 2.72, 3.30) of being zero dose if their mother had not received any tetanus injections, 2.46 times the odds (95% CI: 2.21, 2.74) of being zero dose if their mother had not received any ANC visits, and had nearly twice the odds (OR = 1.87, 95% CI: 1.70, 2.05) of being zero dose if their mother had a home delivery, compared to children of mothers who received at least 2 tetanus injections, received at least 4 ANC visits, and had a facility delivery, respectively. DISCUSSION: A lack of access to maternal health care was a strong risk factor of zero dose status and highlights important opportunities to improve the quality and integration of maternal and child health programs. Additionally, because a substantial proportion of zero dose children and their mothers do receive appropriate care, approaches to reach zero dose children should incorporate mitigating missed opportunities for vaccination.

Novel amino-modified bamboo-derived biochar-supported nano-zero-valent iron (AMBBC-nZVI) composite for efficient Cr(VI) removal from aqueous solution.

Biochar-supported nano-zero-valent iron (BC-nZVI) composites have been extensively investigated for the treatment of Cr(VI)-containing wastewater. However, the inherent oxygen-containing groups with negative charges on BC exhibit electrostatic repulsion of the electronegative Cr(VI) species, limiting Cr(VI) removal. To overcome this limitation, this study prepared and used amino-modified bamboo-derived BC (AMBBC) as a supporting matrix to synthesize a novel AMBBC-nZVI composite. The amino groups (-NH2) on AMBBC were easily protonated and transformed into positively charged ions (-NH3+), which favored the attraction of Cr(VI) to AMBBC-nZVI, enhancing Cr(VI) removal. The experimental results demonstrated that the Cr(VI) removal efficiency of AMBBC-nZVI was 95.3%, and that of BBC-nZVI was 83.8% under the same conditions. The removal of Cr(VI) by AMBBC-nZVI followed the pseudo-second-order kinetic model and Langmuir isotherm model and was found to be a monolayer chemisorption process. Thermodynamic analysis revealed that the Cr(VI) removal process was spontaneous and endothermic. The mechanism analysis of Cr(VI) removal indicated that under an acidic condition, the -NH3+ groups on AMBBC adsorbed the electronegative Cr(VI) species via electrostatic interaction, promoting the attachment of Cr(VI) on AMBBC-nZVI; the adsorbed Cr(VI) was then reduced to Cr(III) by Fe0 and Fe(II), accompanied by the formation of Fe(III); moreover, AMBBC allowed the electron shuttle of nZVI to reduce Cr(VI); finally, the Cr(III) and Fe(III) species deposited on the surface of AMBBC-nZVI as Cr(III)-Fe(III) hydroxide coprecipitates.

Enzyme-catalyzed electrochemical aptasensor for ultrasensitive detection of soluble PD-L1 in breast cancer based on decorated covalent organic frameworks and carbon nanotubes.

BACKGROUND: Soluble programmed death-ligand 1 (sPD-L1) is critically involved in breast cancer recurrence and metastasis. However, the clinical application of highly sensitive sPD-L1 assays remains a challenge due to its low abundance in peripheral blood. To address this issue, for the first time, an enzyme-catalyzed electrochemical aptasensing platform was devised, incorporating covalent organic frameworks-gold nanoparticles-antibody-horseradish peroxidase (COFs-AuNPs-Ab-HRP) and polyethyleneimine-functionalized multiwalled carbon nanotubes (MWCNTs-PEI-AuNPs) for the highly specific and ultrasensitive detection of sPD-L1. RESULTS: MWCNTs-PEI-AuNPs possessed an extensive specific surface area and exhibited excellent electrical conductivity, facilitating the immobilization of aptamer and amplifying the signal. COFs modified with AuNPs not only amplified the electrical signal but also proffered a loading platform for the Ab and HRP. The favorable biocompatibility of COFs contributed to the preservation of enzyme activity and stability. HRP acted in synergy with hydrogen peroxide (H2O2) to catalyze the oxidation of hydroquinone (HQ) to benzoquinone (BQ). Subsequently, BQ underwent electrochemical reduction to HQ, inducing an enzymatic redox cycle that amplified the electrochemical signal and enhanced the sensitivity and selectivity of the detection method. The developed aptasensor displayed a liner range for sPD-L1 identification from 1 pg mL-1 to 100 ng mL-1 and the detection limit reached 0.143 pg mL-1 (S/N = 3). SIGNIFICANCE: Paving the way for clinical application, this strategy detected differences in sPD-L1 in cell supernatants and peripheral blood of breast cancer patients with higher sensitivity compared to commercial sPD-L1 ELISA kit. This work demonstrates significant potential in offering reference information for early diagnosis and disease surveillance of breast cancer.

Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction.

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO2 reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni-N4 and Fe-N4 pair sites is designed for boosting gas-solid CO2 reduction with H2 O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)-N-C DSAC exhibits a superior photothermal catalytic performance for CO2 reduction to CO (86.16 µmol g-1 h-1 ), CH4 (135.35 µmol g-1 h-1 ) and CH3 OH (59.81 µmol g-1 h-1 ), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe-N-C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)-N-C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni-N-N-Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO3 dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO3 pathways) for solar-driven photothermal CO2 reduction to initial CO production.

Self-calibrated NICE-OHMS based on an asymmetric signal: theoretical analysis and experimental validation.

As an ultra-sensitive detection technique, the noise-immune cavity enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) technique has great potential for assessment of the concentration of trace gases. To determine gas concentrations at the ppt or lower level with high accuracy, it is desirable that the technique exhibits self-calibration (or calibration-free) capabilities. Although being sensitive, NICE-OHMS has so far not demonstrated any such ability. To remedy this, this paper provides a self-calibrated realization of NICE-OHMS that is based on a switching of the feedback target of the DeVoe-Brewer (DVB) locking procedure from the modulation frequency of the frequency modulation spectroscopy (FMS) to the cavity length, which creates an asymmetrical signal whose form and size can be used to unambiguously assess the gas concentration. A comprehensive theoretical model for self-calibrated NICE-OHMS is established by analyzing the shift of cavity modes caused by intracavity absorption, demonstrating that gas absorption information can be encoded in both the laser frequency and the NICE-OHMS signal. To experimentally verify the methodology, we measure a series of dispersion signals under different levels of absorbance using a built experimental setup. An instrument factor and the partial pressure are obtained by fitting the measured signal through theoretical expressions. Our results demonstrate that fitted values are more accurate for higher partial pressures than for lower. To improve on the accuracy at low partial pressures, it is shown that the instrument factor obtained by fitting the signal at large partial pressures (in this case, above 7.8 µTorr) can be set to a fixed value for all fits. By this, the partial pressures can be assessed with a relative error below 0.65%. This technique has the potential to enable calibration-free ultra-sensitive gas detection.

Programa de diabetes: improving diabetes care for undocumented immigrants using the Chronic Care Model at a free community clinic.

AIMS: This study examined whether the Chronic Care Model can be successfully applied to improve health outcome measures for uninsured, undocumented immigrants with diabetes at a free, non-federally funded community clinic. METHODS: Data were collected from 128 uninsured, undocumented immigrants enrolled in Programa de diabetes, a comprehensive diabetes program at People's Health Clinic based on the six core elements of the Chronic Care Model. All study participants self-identified by the Hispanic ethnicity. A longitudinal study design was used to compare baseline diabetic health measures with outcome data after patient program participation over a 12-month enrollment period. Linear mixed effect model was used to determine the patient specific change in HbA1C across time, controlling for gender, age, food insecurity, income level, diabetes type, and literacy. In addition, McNemar tests were conducted to compare the coverage of eye exams and statin use before and after program enrollment. RESULTS: After program enrollment, individual specific change in HbA1C was expected to be - 0.201 [95% CI 0.244, - 0.158] % per month after controlling for baseline covariates. There were statistically significant improvements in both eye exam coverage (p < 0.01) and statin use (p < 0.01). CONCLUSIONS: The Chronic Care Model can be successfully applied to improve health outcome measures at a free, non-federally funded community clinic among uninsured, undocumented immigrants, who identify by the Hispanic ethnicity and have the diagnosis of diabetes. Barriers to care including food insecurity, federal poverty level and illiteracy do not preclude glycemic control.

Immune mechanisms of group B coxsackievirus induced viral myocarditis.

Viral myocarditis is known to be a primary cause of dilated cardiomyopathy (DCM) that can lead to heart failure and sudden cardiac death and is invariably caused by myocardial viral infection following active inflammatory destruction of the myocardium. Although acute viral myocarditis frequently recovers on its own, current chronic myocarditis therapies are unsatisfactory, where the persistence of viral or immunological insults to the heart may play a role. Cellular and mouse experimental models that utilized the most prevalent Coxsackievirus group B type 3 (CVB3) virus infection causing myocarditis have illustrated the pathophysiology of viral myocarditis. In this review, immunological insights into the different stages of development of viral myocarditis were discussed, concentrating on the mechanisms of innate and adaptive immunity in the development of CVB3-induced myocarditis.

Effects of Pretreatment and Polarization Shielding on EK-PRB of Fe/Mn/C-LDH for Remediation of Arsenic Contaminated Soils.

In this study, coupling electrokinetic (EK) with the permeable reactive barriers (PRB) of Fe/Mn/C-LDH composite was applied for the remediation of arsenic-contaminated soils. By using self-made Fe/Mn/C-LDH materials as PRB filler, the effects of pretreatment and polarization shielding on EK-PRB of Fe/Mn/C-LDH for remediation of arsenic contaminated soils were investigated. For the pretreatment, phosphoric acid, phosphoric acid and water washing, and phosphate were adopted to reduce the influence of iron in soil. The addition of phosphate could effectively reduce the soil leaching toxicity concentration. The removal rate of the soil pretreated with phosphoric acid or phosphoric acid and water washing was better than with phosphate pretreatment. For the polarization shielding, circulating electrolyte, electrolyte type, anion and cation membranes, and the exchange of cathode and anode were investigated. The electrolyte circulates from the cathode chamber to the anode chamber through the peristaltic pump to control the pH value of the electrolyte, and the highest arsenic toxicity removal rate in the soil reaches 97.36%. The variation of total arsenic residue in soil using anion and cation membranes is the most regular. The total arsenic residue gradually decreases from cathode to anode. Electrode exchange can neutralize H+ and OH- produced by electrolyte, reduce the accumulation of soil cathode area, shield the reduction of repair efficiency caused by resistance polarization, enhance current, and improve the removal rate of arsenic in soil.

Safety Flight Control Design of a Quadrotor UAV With Capability Analysis.

This article considers the safety control problem of a quadrotor unmanned aerial vehicle (UAV) subject to actuator faults and external disturbances, based on the quantization of system capability and safety margin. First, a trajectory function is constructed online with backpropagation of system dynamics. Therefore, a degraded trajectory is gracefully regenerated, via the tradeoff between the remaining system capability and the expected derivatives (velocity, jerk, and snap) of the trajectory. Second, a control-oriented model is established into a form of strict feedback, integrating actuator malfunctions and disturbances. Therefore, a retrofit dynamic surface control (DSC) scheme based on the control-oriented model is developed to improve the tracking performance. When comparing to the existing control methods, the compensation ability is analyzed to determine whether the faults and disturbances can be handled or not. Finally, simulation and experimental studies are conducted to highlight the efficiency of the proposed safety control scheme.

Poor expression of miR-195-5p can assist the diagnosis of cerebral vasospasm after subarachnoid hemorrhage and predict adverse outcomes.

OBJECTIVE: Patients with spontaneous subarachnoid hemorrhage (SAH) may develop refractory arterial cerebral vasospasm (CVS), which is the leading cause of death in SAH patients. This study explored the clinical diagnostic value of serum miR-195-5p levels in CVS after SAH (SAH + CVS) and its relationship with the prognosis of SAH + CVS. METHODS: A total of 110 patients with spontaneous SAH were divided into the SAH group (N = 62) and SAH + CVS group (N = 58), with 60 healthy subjects as controls. The clinical data of blood glucose, blood sodium fluctuation, and serum lactic acid were recorded. miR-195-5p serum level was detected by RT-qPCR and its diagnostic value on SAH + CVS was analyzed by receiver operating characteristic curve. Serum levels of PDGF/IL-6/ET-1 and their correlation with miR-195-5p were analyzed using RT-qPCR, enzyme-linked immunosorbent assay, and Pearson's method. The patient prognosis was evaluated by Glasgow Outcome Scale. The effect of miR-195-5p levels on adverse prognosis was analyzed by Kaplan-Meier method and Cox regression analysis. RESULTS: miR-195-5p was lowly expressed in the serum of SAH patients and lower in SAH + CVS patients. Serum miR-195-5p level assisted the diagnosis of SAH and SAH + CVS and was negatively correlated with PDGF/IL-6/ET-1 levels and was an independent risk factor together with ET-1 and blood glucose for SAH + CVS. miR-195-5p low expression predicted a higher cumulative incidence of adverse outcomes and was an independent predictor of adverse outcomes. CONCLUSION: Poor expression of miR-195-5p can assist the diagnosis of SAH + CVS and predict higher adverse outcomes.

Circulating CD45+EpCAM+ cells as a diagnostic marker for early-stage primary lung cancer.

Lung cancer is a highly prevalent type of cancer, accounting for 11.6% of all cancer incidences. Early detection and treatment can significantly improve the survival rate and quality of life of patients; however, there is no accurate, effective, and easy-to-use test for early lung cancer screening. In this study, flow cytometry was used to detect the presence of CD45+EpCAM+ cells in tumor tissues and peripheral blood mononuclear cells (PBMCs) in patients with lung cancer. Moreover, the proportion of CD45+EpCAM+ cells in PBMCs of patients with lung cancer was found to be significantly higher than that of healthy volunteers. Tumor-related serum markers level was also measured in the peripheral blood of these patients using an electrochemiluminescence assay. The correlation between CD45+EpCAM+ cells, carcinoembryonic antigen (CEA), and lung cancer was investigated using receiver operating characteristic (ROC) curve analysis, which showed the sensitivity and specificity of the CD45+EpCAM+ cell to be 81.58% and 88.89%, respectively. Further analysis yielded an area under the ROC curve (ROC/area under the curve [AUC]) of 0.845 in patients PBMCs with lung cancer, which was slightly higher than that of CEA (0.732). Therefore, the detection of CD45+EpCAM+ cells in PBMCs may be helpful for the early screening and auxiliary diagnosis of lung cancer.

A ratiometric fluorescence method based on nitrogen-doped carbon quantum dots for the determination of the activity of alkaline phosphatase.

Herein, a simple and sensitive ratiometric fluorescence sensing platform to detect alkaline phosphatase (ALP) activity is developed on the basis of yellow fluorescent nitrogen-doped carbon quantum dots (YNCDs). The hydrolysis of ascorbic acid 2-phosphate (AAP) into ascorbic acid (AA) is catalyzed by ALP. Then, AA will react with o-phenylenediamine (OPD) to form 3-(1,2-dihydroxyethyl)furo[3,4b]-quinoxaline (QXD) which is a blue fluorescent quinoxaline derivative with emission at 435 nm in the presence of Cu2+. YNCDs have yellow fluorescence emission at 555 nm, and can maintain stable in QXD reaction system. Therefore, by utilizing the fluorescence of YNCDs at 555 nm as reference signal and the fluorescence of QXD at 435 nm as report signal, we can detect the ALP activity by monitoring the fluorescence ratio (F435/F555). The linear range is 0.5-5 U/L, and the limit of detection is 0.14 U/L. An application of this method for the analysis of ALP in human serum has given satisfactory results. A ratiometric fluorescent nanoprobe for ascorbic acid and alkaline phosphatase detection with excellent biocompatible and high sensitivity was successfully constructed based on YNCDs and QXD.