RESUMO
Cesium lead halide (CsPbX3, X = Cl, Br, I) perovskite quantum dots (QDs) have been intriguing optoelectronic materials for applications in various devices owing to their superior electronic and optical properties. However, poor resistance to humidity and light irradiation impedes their promotion. Herein, bulk perovskite-type layered CsCa2Ta3O10 is exfoliated into two-dimensional (2D) negatively charged Ca2Ta3O10- (CTO) nanosheets as seeds to in situ synthesize and composite CsPbBr3. The as-synthesized CsPbBr3/CTO nanocomposites possess improved green emission with apparently prolonged decay time with reference to bare CsPbBr3 QDs. The decay time can retrieve to a normal state when the nanocomposites are treated with some water. It is found that the CTO acts as a defect to trap the bound exciton of the loaded CsPbBr3. Protons from water can preferably replace Cs+ at the interface of the nanocomposites, resulting in the separation of the nanosheets and CsPbBr3 and retrieving the decay time. X-ray photoelectron spectroscopy results also indicate the strong interaction between CsPbBr3 and CTO with reference to the physical mixing sample of bare CsPbBr3 QDs and CTO nanosheets. The decoration of ultrathin 2D charge-bearing oxide nanosheets on the QDs benefits significant improvements in humidity resistance and photostability performance in light-emitting diode devices. This research offers a distinct strategy to modify the surface of perovskite QDs.
RESUMO
CsPbX3 (X = Cl, Br, I) perovskite quantum dots (QDs) have emerged as competitive candidate luminescent materials in the photoelectric fields due to their superior luminescence properties. However, the major drawback such as poor resistance to temperature, moisture, and irradiation of light, especially for the red QDs with I-, hinders their practical applications. Herein, we synthesized Mn2+-doped CsPbCl3 embedded in the cage of zeolite-Y as a new orange-red phosphor for the white light-emitting diode (WLED). The composites have significantly improved resistance to both elevated temperature and water over the bare Mn2+-doped QDs. The former exhibits little degradation whereas the latter shows apparent decline upon the irradiation of lights in the orange LED devices, which are fabricated by employing each material as a color-conversion phosphor coated on a 365 nm UV chip. A WLED is also achieved with a 365 nm UV chip coated with a CsPb(Cl0.5,Br0.5)3-Y blue phosphor and a CsPb0.75Mn0.25Cl3-Y orange phosphor. The device possesses a Commission Internationale de l'Éclairage coordinate of (0.34, 0.36), a correlated color temperature of 5336 K and a color rendering index of 81.
RESUMO
With unique and efficient narrow-band red emission and broadband blue light absorption characteristics, Mn4+-activated fluoride red phosphors have gained increasing attention in warm white LEDs (WLEDs) and liquid crystal display (LCD) backlighting applications, whereas the intrinsic hygroscopic nature of these phosphors have inevitably limited their practical applications. Herein, a waterproof narrow-band fluoride phosphor K2TiF6:Mn4+ (KTF) has been demonstrated via a facile superhydrophobic surface-modification strategy. With the use of superhydrophobic surface modification with octadecyltrimethoxysilane (ODTMS) on KTF surfaces, the moisture-resistance performance and thermal stability of the phosphor KTF can be significantly improved. Meanwhile, the absorption, and quantum efficiency did not show obvious changes. The surface-modification processes and mechanism, as well as moisture-resistance performances and luminescence properties, of the phosphors have been carefully investigated. It was found that the luminous efficiency (LE) of the modified KTF was maintained at 83.9% or 84.3% after being dispersed in water for 2 h or aged at high temperature (85 °C) and high humidity (85%) atmosphere (HTHH) for 240 h, respectively. The WLEDs fabricated with modified KTF phosphor showed excellent color rendition with lower color temperature (2736 K), higher color rendering index (CRI, Ra = 87.3, R9 = 80.6), and high luminous efficiency (LE = 100.6 lm/W) at 300 mA. These results indicate that hydrophobic silane coupling agent (SCA) surface modification was a promising strategy for enhancing moisture resistance of humidity-sensitive phosphors, exhibiting great potential for practical applications.
