Interfacial Super-Assembly of Vacancy Engineered Ultrathin-Nanosheets Toward Nanochannels for Smart Ion Transport and Salinity Gradient Power Conversion.

Ion-selective nanochannel membranes assembled from two-dimensional (2D) nanosheets hold immense promise for power conversion using salinity gradient. However, they face challenges stemming from insufficient surface charge density, which impairs both permselectivity and durability. Herein, we present a novel vacancy-engineered, oxygen-deficient NiCo layered double hydroxide (NiCoLDH)/cellulose nanofibers-wrapped carbon nanotubes (VOLDH/CNF-CNT) composite membrane. This membrane, featuring abundant angstrom-scale, cation-selective nanochannels, is designed and fabricated through a synergistic combination of vacancy engineering and interfacial super-assembly. The composite membrane shows interlayer free-spacing of ~3.62 Å, which validates the membrane size exclusion selectivity. This strategy, validated by DFT calculations and experimental data, improves hydrophilicity and surface charge density, leading to the strong interaction with K+ ions to benefit the low ion transport resistance and exceptional charge selectivity. When employed in an artificial river water|seawater salinity gradient power generator, it delivers a high-power density of 5.35 W/m2 with long-term durability (20,000s), which is almost 400 % higher than that of the pristine NiCoLDH membrane. Furthermore, it displays both pH- and temperature-sensitive ion transport behavior, offering additional opportunities for optimization. This work establishes a basis for high-performance salinity gradient power conversion and underscores the potential of vacancy engineering and super-assembly in customizing 2D nanomaterials for diverse advanced nanofluidic energy devices.

Interfacial Super-Assembly of Intertwined Nanofibers toward Hybrid Nanochannels for Synergistic Salinity Gradient Power Conversion.

Capturing the abundant salinity gradient power into electric power by nanofluidic systems has attracted increasing attention and has shown huge potential to alleviate the energy crisis and environmental pollution problems. However, not only the imbalance between permeability and selectivity but also the poor stability and high cost of traditional membranes limit their scale-up realistic applications. Here, intertwined "soft-hard" nanofibers/tubes are densely super-assembled on the surface of anodic aluminum oxide (AAO) to construct a heterogeneous nanochannel membrane, which exhibits smart ion transport and improved salinity gradient power conversion. In this process, one-dimensional (1D) "soft" TEMPO-oxidized cellulose nanofibers (CNFs) are wrapped around "hard" carbon nanotubes (CNTs) to form three-dimensional (3D) dense nanochannel networks, subsequently forming a CNF-CNT/AAO hybrid membrane. The 3D nanochannel networks constructed by this intertwined "soft-hard" nanofiber/tube method can significantly enhance the membrane stability while maintaining the ion selectivity and permeability. Furthermore, benefiting from the asymmetric structure and charge polarity, the hybrid nanofluidic membrane displays a low membrane inner resistance, directional ionic rectification characteristics, outstanding cation selectivity, and excellent salinity gradient power conversion performance with an output power density of 3.3 W/m2. Besides, a pH sensitive property of the hybrid membrane is exhibited, and a higher power density of 4.2 W/m2 can be achieved at a pH of 11, which is approximately 2 times more compared to that of pure 1D nanomaterial based homogeneous membranes. These results indicate that this interfacial super-assembly strategy can provide a way for large-scale production of nanofluidic devices for various fields including salinity gradient energy harvesting.

Anionic Co-insertion Charge Storage in Dinitrobenzene Cathodes for High-Performance Aqueous Zinc-Organic Batteries.

Highly active and stable cathodes are critical for aqueous Zn-organic batteries with high capacity, fast redox kinetics, and long life. We herein report para-, meta-, and ortho-dinitrobenzene (p-, m-, and o-DB) containing two successive two-electron processes, as cathode materials to boost the battery performance. Theoretical and experimental studies reveal that nitro constitutional isomerism is key to zincophilic activity and redox kinetics. p-DB hosted in carbon nanoflower harvests a high capacity of 402 mAh g-1 and a superior stability up to 25 000 cycles at 5 A g-1 , giving a Zn-organic battery with a high energy density of 230 Wh kg-1 . An anionic co-insertion charge storage mechanism is proposed, entailing a two-step (de)coordination of Zn(CF3 SO3 )+ with nitro oxygen. Besides, dinitrobenzene can be electrochemically optimized by side group regulation via implanting electron-withdrawing motifs. This work opens a new window to design multielectron nitroaromatics for Zn-organic batteries.

Self-Assembled Carbon Superstructures Achieving Ultra-Stable and Fast Proton-Coupled Charge Storage Kinetics.

Designing ingenious and stable carbon nanostructures is critical but still challenging for use in energy storage devices with superior electrochemistry kinetics, durable capacitive activity, and high rate survivability. To pursue the objective, a simple self-assembly strategy is developed to access carbon superstructures built of nanoparticle embedded plates. The carbon precursors, 2,4,6-trichloro-1,3,5-triazine and 2,6-diaminoanthraquinone can form porous organic polymer with "protic salt"-type rigid skeleton linked by -NH2 + Cl- - "rivets", which provides the cornerstone for hydrogen-bonding-guided self-assembly of the organic backbone to superstructures by π-π plane stacking. The ameliorative charge density distribution and decreased adsorption energy in as-fabricated carbon superstructures allow the high accessibility of the build-in protophilic sites and efficient ion diffusion with a low energy barrier. Such superstructures thus deliver ultra-stable charge storage and fast proton-coupled kinetics at the structural-chemical defects, contributing to unprecedented lifespan (1 000 000 cycles), high-rate capability (100 A g-1 ) for carbon-based supercapacitors, and an ultrahigh energy density (128 Wh kg-1 ) for Zn-ion hybrid supercapacitors. The self-assembled carbon superstructures significantly improve the all-round electrochemical performances, and hold great promise for efficient energy storage.

Deep-eutectic-solvent synthesis of N/O self-doped hollow carbon nanorods for efficient energy storage.

N/O self-doped hollow carbon nanorods (HCNs) with micro/mesoporous walls are fabricated based on a new deep-eutectic-solvent that serves as an all-in-one precursor, self-template, and self-dopant agent. The carbon-based supercapacitor using an ionic liquid electrolyte exhibits a high energy density of 116.5 W h kg-1 with excellent long-term cycling performance.

Nanocarbon-Based Materials for Flexible All-Solid-State Supercapacitors.

Because of the rapid development of flexible electronics, it is important to develop high-performance flexible energy-storage devices, such as supercapacitors and metal-ion batteries. Compared with metal-ion batteries, supercapacitors exhibit higher power density, longer cycling life, and excellent safety, and they can be easily fabricated into all-solid-state devices by using polymer gel electrolytes. All-solid-state supercapacitors (ASSSCs) have the advantages of being lightweight and flexible, thus showing great potential to be used as power sources for flexible portable electronics. Because of their high specific surface area and excellent electrical and mechanical properties, nanocarbon materials (such as carbon nanotubes, graphene, carbon nanofibers, and so on) have been widely used as efficient electrode materials for flexible ASSSCs, and great achievements have been obtained. Here, the recent advances in flexible ASSSCs are summarized, from design strategies to fabrication techniques for nanocarbon electrodes and devices. Current challenges and future perspectives are also discussed.

Zr-Doped Mesoporous Ta3N5 Microspheres for Efficient Photocatalytic Water Oxidation.

Tantalum nitride (Ta3N5) has been considered as a promising candidate for photocatalytic water splitting because of its strong visible-light absorbance as far as 600 nm. However, its catalytic activity is often hampered by various intrinsic/extrinsic defects. Here, we prepared a series of Zr-doped mesoporous tantalum nitride (Ta3N5) via a template-free method and carried out a detailed investigation of the role of Zr doping upon the photocatalytic performance. Various physicochemical properties including crystal structure, optical absorption, and so on were systematically explored. Our results show that doping Zr into Ta3N5 induces an enhancement of oxygen content and a suppression of absorption band around 720 nm, indicating an increase of ON• defects and a decrease of VN••• defects in the structure. Introduction of Zr significantly boosts the photocatalytic oxygen production of Ta3N5. The optimized photocatalytic oxygen production rate approaches 105 µmol h-1 under visible light illumination (λ ≥ 420 nm), corresponding to an apparent quantum efficiency as high as 3.2%. Photoelectrochemical analysis and DFT calculation reveal that the superior photocatalytic activity of Zr-doped Ta3N5 originates from a high level of ON• defects' concentration, which contributes to a high electron mobility, and a low level of VN••• defects' concentration, which often act as charge recombination centers.

Synthesis of CaCO3 Nanobelts for Drug Delivery in Cancer Therapy.

Nanobelt carriers have demonstrated some advantages such as good biocompatibility, biodegradability, and strain-accommodating properties. We prepared an optimized nanobelt carrier formulation for drug (etoposide) as an oral delivery system and estimated the potential of calcium carbonate (CaCO3) nanobelts. The nanobelts were prepared by the method of binary solvent approach and were characterized by transmission electron microscope (TEM), scanning electron microscopy (SEM), and ultraviolet-visible (UV-vis) spectra. MTT (3-(4,5-dimethyl-2-thiazolyl)-2, 5-diphenyl-2H-tetrazolium bromide) assay test exhibited that etoposide-loaded calcium carbonate nanobelts (ECCNBs) showed a higher cell kill ratio against SGC-7901 cells compared with free drug. The apoptosis test and cell cycle test analysis revealed that etoposide entrapped in calcium carbonate nanobelts (CCNBs) could enhance the delivery efficiencies of drug and improved inhibition effect. The present findings demonstrated that ECCNBs might induce cell cycle arrest at G2/M phase and cell apoptosis in a p53-related manner. It can be foreseen that CCNBs are a promising drug carrier to store the anti-cancer drug for cancer therapy and drug delivery.

Novel mesoporous Si@C microspheres as anodes for lithium-ion batteries.

In this paper, we demonstrate the design and synthesis of novel mesoporous Si@C microspheres as anode materials for high-performance lithium-ion batteries. SiO2 nanoparticles modified with hexadecyl trimethyl ammonium bromide are enveloped within resorcinol-formaldehyde polymer microspheres which form in the ethanol-water-ammonia system. Mesoporous voids between Si nanoparticles and the carbon framework are generated after carbonization at 800 °C and magnesiothermic reduction at 650 °C. The resultant Si@C microspheres show regular spherical shapes with a mean diameter of about 500 nm, a mesopore size of 3.2 nm and specific surface areas of 401-424 m(2) g(-1). Mesoporosity of Si@C microspheres effectively buffers the volume expansion/shrinkage of Si nanoparticles during Li ion insertion/extraction, which endows mesoporous Si@C microspheres with excellent electrochemical performance and cycle stability when they are used as lithium-ion battery anode materials. A typical sample of mesoporous Si@C microspheres presents a specific capacity of 1637 and 1375 mA h g(-1) at first discharge and charge under a current density of 50 mA g(-1). After 100 cycles, the charge capacity remains 1053 mA h g(-1) with a coulombic efficiency of 99%, showing good cycle stability of the anode. This finding highlights the potential application of mesoporous Si@C microspheres in lithium-ion battery anode materials.

A seeded synthetic strategy for uniform polymer and carbon nanospheres with tunable sizes for high performance electrochemical energy storage.

We established a novel and facile strategy to synthesize uniform polymer and carbon nanospheres, the diameters of which can be precisely programmed between 35-105 and 30-90 nm, respectively, via time-controlled formation of colloidal seeds. The carbon nanospheres show promising prospects in high rate performance electrochemical energy storage.

Supramolecular core-shell nanosilica@liposome nanocapsules for drug delivery.

The fabrication of core-shell structural nanosilica@liposome nanocapsules as a drug delivery vehicle is reported. SiO(2) nanoparticles are encapsulated within liposomes by a W/O/W emulsion approach to form supramolecular assemblies with a core of colloidal particles enveloped by a lipid bilayer shell. A nanosilica core provides charge compensation and architectural support for the lipid bilayer, which significantly improves their physical stability. A preliminary application of these core-shell nanocapsules for hemoglobin (Hb) delivery is described. Through the H-bonding interaction between the hydroxyl groups on nanosilicas and the amino nitrogens of Hb, Hb-SiO(2) nanocomplexes in which the saturated adsorption amount of Hb on SiO(2) is 0.47 g g(-1) are coated with lipids to generate core-shell Hb-SiO(2)@liposome nanocapsules with mean diameters of 60-500 nm and Hb encapsulation efficiency of 48.4-87.9%. Hb-SiO(2)@liposome supramolecular nanovehicles create a mode of delivery that stabilizes the encapsulated Hb and achieves long-lasting release, thereby improving the efficacy of the drug. Compared with liposome-encapsulated Hb and Hb-loaded SiO(2) particles, such core-shell nanovehicles show substantially enhanced release performance of Hb in vitro. This finding opens up a new window of liposome-based formulations as drug delivery nanovehicles for widespread pharmaceutical applications.

A novel liposome-encapsulated hemoglobin/silica nanoparticle as an oxygen carrier.

A novel liposome-encapsulated hemoglobin/silica nanoparticle (LEHSN) was fabricated by a water-in-oil-in-water (W/O/W) double emulsion approach. Bovine hemoglobin (Hb) was first adsorbed onto the surfaces of silica nanoparticles (SNs), and then the complex of Hb/SNs was encapsulated by liposome to form LEHSN which has a core-shell supramolecular structure. On the one hand, liposomes built a cell membrane-like environment for the controlled release of Hb. On the other hand, SNs which act as rigid core provide a supported framework for lecithin membrane, and enhance the stability of liposomes. In comparison with liposome-encapsulated Hb (LEH), LEHSN shows substantially enhanced stability and improved release property of Hb in vitro. This study highlights the potential of the novel LEHSN as an oxygen carrier for pharmaceutical applications.

[Absorption spectra analysis in the degradation process of quinoline in aqueous solution by VUV lights].

The feasibility of monitoring the degradation progress on line by UV-Vis absorption spectra in the degradation process of quinoline in aqueous solution using the low-pressure quartz mercury lamp as vacuum ultraviolet source was evaluated by the monitoring and protracting of the UV-Vis absorption spectra at different time. The characteristic and mechanism of the change in the UV absorption spectra were analyzed by monitoring the concentration of the substrate, COD (chemical oxygen demand), TOC (total organic carbon) and pH value of the solution. It was showed that quinoline occurs in different forms under different pH conditions and consequently causes different UV-Vis absorption spectra due to the N atom in the pyridine ring. In the degradation progress, the UV-Vis absorption spectra were impacted by the degradation rate of the substrates, the production rate of the intermediates and the pH value of the solution. Proton acids were produced as intermediates and make quinoline occur in the form of its conjugated acid. When the increase in the absorption produced by the protonation was equal to the decrease induced by the degradation, the curve of the absorption at 313 nm, the characteristic absorption peak of quinoline, showed a flat in the duration of 1-3 min and then decayed continuously. In addition, the absorption at 254 nm reached a maximum at 5 min and then decayed continuously to nearly 0 at 30 min, when the absorption of the system only occurred in the region of wavelength shorter than 220 nm, indicating that the substrate was degraded completely. The research revealed that UV absorption spectra could be used to monitor the degradation process of quinoline in aqueous solution by VUV lights.

[Spectral analysis of transient species of quinoline degradation].

Quinoline's degradation was studied by pulse radiolysis. It was found that hydrated electron, hydrogen radical, hydroxyl radical and SO4*- can react with quinoline. The absorption spectra of the transient species of quinoline were obtained, and related constants were determined, but it was found that the species of Br2*- and N3*- can't react with quinoline. The results give us some advices for studing the degradation of quinoline.