Photophysical Study on the Effect of the External Potential on NiO-Based Photocathodes.

In the present study, we investigate the effects of the applied external potential on a dye-sensitized NiO photocathode by time-resolved photoluminescence and femtosecond transient absorption spectroscopy under operating conditions. Instead of the anticipated acceleration of photoinduced hole injection from dye into NiO at a more negative applied potential, we observe that both hole injection and charge recombination are slowed down. We cautiously assign this effect to a variation in OH- ion concentration in the inner Helmholtz plane of the electrochemical double layer with applied potential, warranting further investigation for the realization of efficient solar fuel devices.

CuBO2 : A Potential Alternative for NiO as a Hole Acceptor Layer.

P-type metal oxides, and in particular NiO, are typically used as hole accepting layers in dye-sensitized photocathodes. Delafossites (CuMO2 ) with M=B, Al, Cr or Ga have recently been proposed as attractive substitutes for NiO, with theoretically a higher hole mobility than NiO, therefore allowing a higher efficiency when the photocathode is applied in solar to fuel devices. We have experimentally validated the photoelectrochemical performance of photocathodes consisting of nanoporous CuBO2 (CBO) on Fluorine-doped Tin Oxide substrates, photosensitized with a light absorbing P1 dye. Femtosecond transient absorption and time-resolved photoluminescence studies show that light-induced hole injection occurs from the P1 dye into the CBO in a few ps, comparable to the time constant observed for NiO-based photocathodes. Importantly, the CBO-based photocathode shows significantly slower charge recombination than the NiO-based analogue. These results illustrate the promise of CBO as a p-type semiconductor in solar energy conversion devices.

Rotaxane-Functionalized Dyes for Charge-Rectification in p-Type Photoelectrochemical Devices.

A supramolecular photovoltaic strategy is applied to enhance power conversion efficiencies (PCE) of photoelectrochemical devices by suppressing electron-hole recombination after photoinduced electron transfer (PET). Here, the author exploit supramolecular localization of the redox mediator-in close proximity to the dye-through a rotaxane topology, reducing electron-hole recombination in p-type dye-sensitized solar cells (p-DSSCs). Dye PRotaxane features 1,5-dioxynaphthalene recognition sites (DNP-arms) with a mechanically-interlocked macrocyclic redox mediator naphthalene diimide macrocycle (3-NDI-ring), stoppering synthetically via click chemistry. The control molecule PStopper has stoppered DNP-arms, preventing rotaxane formation with the 3-NDI-ring. Transient absorption and time-resolved fluorescence spectroscopy studies show ultrafast (211 ± 7 fs and 2.92 ± 0.05 ps) PET from the dye-moiety of PRotaxane to its mechanically interlocked 3-NDI-ring-acceptor, slowing down the electron-hole recombination on NiO surfaces compared to the analogue . p-DSSCs employing PRotaxane (PCE = 0.07%) demonstrate a 30% PCE increase compared to PStopper (PCE = 0.05%) devices, combining enhancements in both open-circuit voltages (VOC = 0.43 vs 0.36 V) and short-circuit photocurrent density (JSC = -0.39 vs -0.34 mA cm-2 ). Electrochemical impedance spectroscopy shows that PRotaxane devices exhibit hole lifetimes (τh ) approaching 1 s, a 16-fold improvement compared to traditional I- /I3 - -based systems (τh = 50 ms), demonstrating the benefits obtained upon nanoengineering of interfacial dye-regeneration at the photocathode.

Disentangling Hot Carrier Decay and the Nature of Low-n to High-n Transfer Processes in Quasi-Two-Dimensional Layered Perovskites.

Quasi-two-dimensional (2D) metal halide perovskites (MHPs) are promising photovoltaic (PV) materials because of their impressive optical and optoelectronic properties and improved stability compared to their 3D counterparts. The presence of domains with varying numbers of inorganic layers between the organic spacers (n-phases), each with different bandgaps, makes the photoinduced carrier dynamics in films of these materials complex and intriguing. Existing interpretations of the ultrafast femto- or picosecond spectroscopy data have been inconsistent, most of them focusing either on exciton/charge transfer from low-n to high-n phases or on hot carrier cooling, but not combined. Here, we present a comprehensive study of the carrier dynamics in the Dion-Jacobson type (PDMA)(MA)(n-1)PbnI(3n+1) (PDMA = 1,4-phenylenedimethylammonium, MA = methylammonium) perovskite, stoichiometrically prepared as ⟨n⟩ = 5. Within the film, a coexistence of various n-phases is observed instead of solely the n = 5 phase, resulting in an interesting energy landscape for the motion of excitons and charge carriers. We disentangle hot carrier cooling from exciton transfer between low-n and high-n phases using ultrafast time-resolved photoluminescence and transient absorption spectroscopy. Photophysical modeling by target analysis shows that carrier cooling occurring on a subpicosecond time scale is followed by exciton transfer from low-n into high-n phases in ca. 35 ps when the film is excited by 532 or 490 nm light. Carriers in the high-n phase are much longer lived and decay in a ns time window. Overall, our results provide a comprehensive understanding of the photophysics of this material, which helps to optimize quasi-2D MHP materials for a new generation of PV devices.

Photophysical Characterization of Ru Nanoclusters on Nanostructured TiO2 by Time-Resolved Photoluminescence Spectroscopy.

Despite the promising performance of Ru nanoparticles or nanoclusters on nanostructured TiO2 in photocatalytic and photothermal reactions, a mechanistic understanding of the photophysics is limited. The aim of this study is to uncover the nature of light-induced processes in Ru/TiO2 and the role of UV versus visible excitation by time-resolved photoluminescence (PL) spectroscopy. The PL at a 267 nm excitation is predominantly due to TiO2, with a minor contribution of the Ru nanoclusters. Relative to TiO2, the PL of Ru/TiO2 following a 267 nm excitation is significantly blue-shifted, and the bathochromic shift with time is smaller. We show by global analysis of the spectrotemporal PL behavior that for both TiO2 and Ru/TiO2 the bathochromic shift with time is likely caused by the diffusion of electrons from the TiO2 bulk toward the surface. During this directional motion, electrons may recombine (non)radiatively with relatively immobile hole polarons, causing the PL spectrum to red-shift with time following excitation. The blue-shifted PL spectra and smaller bathochromic shift with time for Ru/TiO2 relative to TiO2 indicate surface PL quenching, likely due to charge transfer from the TiO2 surface into the Ru nanoclusters. When deposited on SiO2 and excited at 532 nm, Ru shows a strong emission. The PL of Ru when deposited on TiO2 is completely quenched, demonstrating interfacial charge separation following photoexcitation of the Ru nanoclusters with a close to unity quantum yield. The nature of the charge-transfer phenomena is discussed, and the obtained insights indicate that Ru nanoclusters should be deposited on semiconducting supports to enable highly effective photo(thermal)catalysis.

Dual Role of Surface Hydroxyl Groups in the Photodynamics and Performance of NiO-Based Photocathodes.

Photoelectrochemical (PEC) cells containing photocathodes based on functionalized NiO show a promising solar-to-hydrogen conversion efficiency. Here, we present mechanistic understanding of the photoinduced charge transfer processes occurring at the photocathode/electrolyte interface. We demonstrate via advanced photophysical characterization that surface hydroxyl groups formed at the NiO/water interface not only promote photoinduced hole transfer from the dye into NiO, but also enhance the rate of charge recombination. Both processes are significantly slower when the photocathode is exposed to dry acetonitrile, while in air an intermediate behavior is observed. These data suggest that highly efficient devices can be developed by balancing the quantity of surface hydroxyl groups of NiO, and presumably of other p-type metal oxide semiconductors.

Unraveling the Mechanisms of Beneficial Cu-Doping of NiO-Based Photocathodes.

Dye-sensitized photoelectrochemical (DSPEC) water splitting is an attractive approach to convert and store solar energy into chemical bonds. However, the solar conversion efficiency of a DSPEC cell is typically low due to a poor performance of the photocathode. Here, we demonstrate that Cu-doping improves the performance of a functionalized NiO-based photocathode significantly. Femtosecond transient absorption experiments show longer-lived photoinduced charge separation for the Cu:NiO-based photocathode relative to the undoped analogue. We present a photophysical model that distinguishes between surface and bulk charge recombination, with the first process (∼10 ps) occurring more than 1 order of magnitude faster than the latter. The longer-lived photoinduced charge separation in the Cu:NiO-based photocathode likely originates from less dominant surface recombination and an increased probability for holes to escape into the bulk and to be transported to the electrical contact of the photocathode. Cu-doping of NiO shows promise to suppress detrimental surface charge recombination and to realize more efficient photocathodes.

Reversible Charge Transfer and Adjustable Potential Window in Semiconductor/Faradaic Layer/Liquid Junctions.

Semiconductor/Faradaic layer/liquid junctions have been widely used in solar energy conversion and storage devices. However, the charge transfer mechanism of these junctions is still unclear, which leads to inconsistent results and low performance of these devices in previous studies. Herein, by using Fe2O3 and Ni(OH)2 as models, we precisely control the interface structure between the semiconductor and the Faradaic layer and investigate the charge transfer mechanism in the semiconductor/Faradaic layer/liquid junction. The results suggest that the short circuit severely restricts the performance of the junction for both solar water splitting cells and solar charging supercapacitors. More importantly, we also find that the charge-discharge potential window of a Faradaic material sensitively depends on the energy band positions of a semiconductor, which provides a new way to adjust the potential window of a Faradaic material. These new insights offer guidance to design high-performance devices for solar energy conversion and storage.

Interface-Engineered Ni(OH)2 /ß-like FeOOH Electrocatalysts for Highly Efficient and Stable Oxygen Evolution Reaction.

Iron-based (oxy)hydroxides are especially attractive electrocatalysts for the oxygen evolution reaction (OER) owing to their earth abundance, low cost, and nontoxicity. However, poor OER kinetics on the surface restricts the performance of the FeOOH electrocatalyst. Herein, a highly efficient and stable Ni(OH)2 /ß-like FeOOH electrocatalyst is obtained by facile electroactivation treatment. The activated Ni(OH)2 /ß-like FeOOH sample indicates an overpotential of 300 mV at 10 mA cm-2 for the OER, and no clear current decay after 50 h of testing; this is comparable to the most efficient nickel- and cobalt-based electrocatalysts on planar substrates. Furthermore, studies suggest that ß-like FeOOH plays a key role in remarkably enhancing the performance during the electroactivation process owing to its metastable tunnel structure with a lower barrier for interface diffusion of Ni2+ ions between the bilayer electrocatalyst. This study develops a new strategy to explore efficient and low-cost electrocatalysts and deepens understanding of bilayer electrocatalysts for the OER.

Optimization of deflection of a big NEO through impact with a small one.

Using a small near-Earth object (NEO) to impact a larger and potentially threatening NEO has been suggested as an effective method to avert a collision with Earth. This paper develops a procedure for analysis of the technique for specific NEOs. First, an optimization method is used to select a proper small body from the database. Some principles of optimality are achieved with the optimization process. Then, the orbit of the small body is changed to guarantee that it flies toward and impacts the big threatening NEO. Kinetic impact by a spacecraft is chosen as the strategy of deflecting the small body. The efficiency of this method is compared with that of a direct kinetic impact to the big NEO by a spacecraft. Finally, a case study is performed for the deflection of the Apophis NEO, and the efficiency of the method is assessed.