Data-driven online prediction of remaining fatigue life of a steel plate based on nonlinear ultrasonic monitoring.

Online monitoring fatigue damage and remaining fatigue life (RFL) prediction of engineering structures are essential to ensure safety and reliability. A data-driven online prediction method based on nonlinear ultrasonic monitoring was developed to predict the RFL of the structures in real-time. Nonlinear ultrasonic parameters were obtained to monitoring the fatigue degradation. A Bayesian framework was employed to continuously compute and update the RFL distributions of the structures. Nonlinear ultrasonic experiments were performed on the fatigue damaged Q460 steel to validate the developed prediction methodology. The result indicates that the developed method has high prediction accuracy and can provide effective information for subsequent decision-making.

A Novel Baseline-Free Method for Damage Localization Using Guided Waves Based on Hyperbola Imaging Algorithm.

Most imaging methods based on ultrasonic Lamb waves in structural health monitoring requires reference signals, recorded in the intact state. This paper focuses on a novel baseline-free method for damage localization using Lamb waves based on a hyperbolic algorithm. This method employs a special array with a relatively small number of transducers and only one branch of the hyperbola. The novel symmetrical array was arranged on plate structures to eliminate the direct waves. The time difference between the received signals at symmetrical sensors was obtained from the damage-scattered waves. The sequence of time difference for constructing the hyperbolic trajectory was calculated by the cross-correlation method. Numerical simulation and experimental measurements were implemented on an aluminum plate with a through-thickness hole in the current state. The imaging results show that both the damages outside and inside the diamond-shaped arrays can be localized, and the positioning error reaches the maximum for the diamond-shaped array with the minimum size. The results indicate that the position of the through-hole in the aluminum plate can be identified and localized by the proposed baseline-free method.

Non-contact phase coded excitation of ultrasonic Lamb wave for blind hole inspection.

The combination of air-coupled ultrasonic testing (ACUT) and ultrasonic Lamb wave is featured with long-distance propagation and high sensitivity to discontinuities, which is a promising method for rapid and accurate inspection of plate-like materials and lightweighted structures. However, dispersive nature of Lamb wave, signal attenuation plus inevitable noises would lead to low signal-to-noise ratio (SNR). To address this problem, phase coded excitation and pulse compression technique are proposed in this paper to achieve higher SNR by over 10 dB in received signals. 13-bit and 1-carrier-period Barker code is employed as both main lobe peak and Peak Side-lobe Level (PSL) are relatively high. It is demonstrated that A0 mode Lamb wave has good localization ability for defects based on these SNR-enhanced signals. Furthermore, Damage Index (DI) and modified Reconstruction Algorithm for the Probabilistic Inspection of Damage (RAPID) are applied to realize ultrasonic imaging based defect evaluation. Results show that the imaging results agree well with the actual artificial defects in terms of size and shape. Lamb-wave-based air-coupled ultrasonic testing, combined with DI and ultrasonic imaging algorithm, could be a potential way in the NDT of lightweighted structures.

A Lorentz Force EMAT Design with Racetrack Coil and Periodic Permanent Magnets for Selective Enhancement of Ultrasonic Lamb Wave Generation.

This article proposes an electromagnetic acoustic transducer (EMAT) for selectively improving the purity and amplitude of ultrasonic Lamb waves in non-ferromagnetic plates. The developed EMAT consists of a racetrack coil and a group of periodic permanent magnets (PPMs). Two-dimensional finite element simulations and experiments are implemented to analyze the working mechanism and performance of the PPM EMAT. Thanks to the specific design, the eddy currents increase with increasing wire density and the directions of the magnetic fields and Lorentz forces alternate according to the polarities of the magnet units. Wires laid uniformly beneath the magnets, and the gaps between adjacent magnets generate tangential and normal Lorentz forces, resulting in-plane (IP) and out-of-plane (OP) displacements, respectively. The constructive interference occurs when the wavelength of the generated Lamb wave is twice the spacing of the magnets, leading to large amplitudes of the targeted ultrasonic Lamb waves. Therefore, the PPM EMAT is capable of generating pure symmetric or antisymmetric mode Lamb waves at respective frequencies. The results prove that the developed PPM EMAT can generate pure either S0 or A0 mode Lamb waves at respective frequencies. The increase in wire width and wire density further increases the signal amplitudes. Compared with the case of conventional meander-line-coil (MLC) EMAT, the amplitudes of the A0 and S0 mode Lamb waves of our PPM EMAT are increased to 880% and 328%, respectively.

Fatigue Damage Evaluation Using Nonlinear Lamb Waves with Quasi Phase-Velocity Matching at Low Frequency.

Due to the dispersive and multimode natures, only nonlinear Lamb waves with exact phase-velocity matching were generally used in previous studies to evaluate the evenly distributed microstructural evolution in the incipient stage of material degradation, because of the cumulative generation of second harmonics, which was also found within a significant propagation distance for mode pair S0-s0 with quasi phase-velocity matching at low frequency. To explore the feasibility of fatigue damage evaluation by using this mode pair and fully utilize its unique merits, the cumulative second harmonic analysis was performed on aluminum alloy specimens with various material damage produced by the continuous low cycle fatigue tests. Similar to mode pair S1-s2 with exact phase-velocity matching, a mountain shape curve between the normalized acoustic nonlinearity parameter and the fatigue life was also achieved with the peak point at about 0.65 fatigue life for mode pair S0-s0, even though a relatively higher sensitivity to fatigue damage was observed for mode pair S1-s2. The excited frequency selection was further analyzed in a certain frequency range, where the quasi phase-velocity matching condition was satisfied for mode pair S0-s0 owing to the less dispersive property. Results show that the fatigue damage can be effectively detected using the mode pair S0-s0, and a relatively lower excited frequency was preferred due to its higher sensitivity to microstructural evolution.

A feasibility study on fatigue damage evaluation using nonlinear Lamb waves with group-velocity mismatching.

The feasibility of fatigue damage evaluation has been investigated using nonlinear Lamb waves with group-velocity mismatching. To choose an efficient mode pair, a parameter is proposed to quantify the efficiency of cumulative second-harmonic generation (SHG) of Lamb waves based on the normal modal analysis. Experiments and simulations are performed to verify the proposed parameter, which demonstrates that whether the matching condition of group velocity is satisfied or not, the efficiency of cumulative SHG increases with the order of Lamb mode for the five low-order Lamb waves investigated. Then, S3-s6 mode pair with group-velocity mismatching is chosen to characterize the fatigue damage of an aluminium alloy for the high efficiency of cumulative SHG. Results show that S3-s6 mode pair is sensitive to fatigue damage evolution and the integrated amplitude of second harmonics increases by nearly 300% with fatigue cycles. Nonlinear Lamb waves with group-velocity mismatching are validated to be a candidate to efficiently evaluate the fatigue damage.

Lamb Wave-Based Structural Health Monitoring on Composite Bolted Joints under Tensile Load.

Online and offline monitoring of composite bolted joints under tensile load were investigated using piezoelectric transducers. The relationships between Lamb wave signals, pre-tightening force, the applied tensile load, as well as the failure modes were investigated. Results indicated that S0/A0 wave amplitudes decrease with the increasing of load. Relationships between damage features and S0/A0 mode were built based on the finite element (FE) simulation and experimental results. The possibility of application of Lamb wave-based structure health monitoring in bolted joint-like composite structures was thus achieved.

Modeling of ultrasonic nonlinearities for dislocation evolution in plastically deformed materials: Simulation and experimental validation.

A nonlinear constitutive relationship was established to investigate nonlinear behaviors of ultrasonic wave propagation in plastically damaged media based on analyses of mixed dislocation evolution. Finite element simulations of longitudinal wave propagation in plastically deformed martensite stainless steel were performed based on the proposed nonlinear constitutive relationship, in which the contribution of mixed dislocation to acoustic nonlinearity was considered. The simulated results were validated by experimental measurements of plastically deformed 30Cr2Ni4MoV martensite stainless steels. Simulated and experimental results both reveal a monotonically increasing tendency of the normalized acoustic nonlinearity parameter as a function of plastic strain. Microscopic studies revealed that the changes of the acoustic nonlinearity are mainly attributed to dislocation evolutions, such as dislocation density, dislocation length, and the type and fraction of dislocations during plastic loading.

[Morphological observation on the adult worms of Taenia saginata in western China].

OBJECTIVE: To investigate the morphological characteristics of the adult worms of Taenia saginata from four areas of Western China. METHODS: 42, 41, 7 and 18 integral worms of Taenia saginata were collected from Duyun and Congjiang of Guizhou Province, Wushi of Xinjiang, and Lhasa of Tibet respectively. The length of worms was measured and the segments were counted. The specimens of scolex, mature and gravid proglottids of the worms were stained, measured and photographed. RESULTS: The mean length of the worms from Duyun, Congjiang, Wushi and Lasa was (1.81+/-0.69) m, (3.84+/-1.32) m, (2.76+/-0.86) m and (3.72+/-1.12) m, and with (574.64+/-189.33), (913.84+/-317.41), (971.29+/-168.30) and (940.38+/-368.26) proglottids, respectively. The mean ratio of the distance between two lateral excretory vessels and the length of vitellarium of the mature proglottids was (1.71+/-0.13), (2.23+/-0.06), (2.03+/-0.21), (2.31+/-0.15) respectively. All the 3 parameters of the worms from Duyun were significantly less than those from other 3 areas (P<0.05). Rudimentary rostellum was found obviously in 3 of 10 scolices of the worms from Duyun. CONCLUSION: The morphological characteristics of the adult worms from Duyun are similar to that of Taenia saginata asiatica, while those of the worms from Congjiang, Wushi and Lhasa are alike to those of Taenia saginata saginata.

Observations on pathological and histochemical changes in piglet livers infected with Taenia saginata asiatica.

To study the pathological and histochemical characteristics of lesions in piglet livers infected with Taenia saginata asiatica (T. saginata asiatica) throughout the different stages, piglets were fed with eggs of T. saginata asiatica and raised in isolation in an animal center to establish the T. saginata asiatica infection model with normal piglets as control. The pathological changes in the piglet livers were observed after the infection using liver sections stained with hematoxylin and eosin. Histochemical methods were used to check the changes in lipid, glycogen and protein content in the liver. The data collected by image analysis were analyzed statistically with Statistical Package for the Social Science. The results show that T. saginata asiatica-exposed piglets were indeed infected. Inflammatory reactions began on the fourth day and progressed rapidly. Kupffer cell hyperplasia, hepatic hydropic degeneration and ballooning degeneration were found in the 10th-20th days after infection. Hepatic central veins and hepatic sinusoids were dilated and congested. Spotty necrosis occurred in some local liver tissues. In the 40th-60th days, granulomatous reactions and mild hepatocirrhosis were the main lesions. In the 70th-80th days, hepatocirrhosis and bile duct proliferation were observed in the liver. In the different stages, lipid drops were increased while glycogen and protein levels were decreased to some degree. There was a significant difference in metabolism between the infected group and the control group (P < 0.01). It is concluded that pigs are the favorable intermediate host of T. saginata asiatica and its infection can result in serious pathological and histochemical lesions in host organs.