Conjugated Microporous Polymer Aerogels Encapsulated within Hydroxyapatite Nanowires Exhibit Good Thermal Insulation and Flame-Retardant Properties.

Aerogels have been widely studied in the field of thermal insulation. Herein, we reported a kind of conjugated micropolymer (CMP) aerogel synthesized by 1,3,5-triethynylbenzene and 2-amino-3,5-dibromopyridine. To enhance the flame-retardant property, we composited hydroxyapatite (HAP) nanowires with a CMP aerogel. Transmission electron microscopy (TEM) analysis revealed that HAP nanowires were encapsulated within nanosized CMP tubes. In addition, the thermal conductivity of HAP2-NCMP aerogel was 0.0251 W m-1 K-1, which possesses good thermal insulation property. In the micro-combustion calorimeter (MCC) test, compared with pure NCMP, the peak heat release rate (pHRR) of HAP2-NCMP decreased from 39.3 to 30.82 W g-1, approximately 21.6% lower. Furthermore, with the increased addition of hydroxyapatite in the HAP-NCMP composite, the pHRR of HAP3-NCMP decreased by about 37.4%. Besides, NCMP possesses good mechanical properties, with a compressive strength of 117.3 kPa at a strain level of 60%. These findings suggest promising application potential for HAP-NCMP in energy-saving and flame-retardant applications.

Rational design of Fe, N co-doped porous carbon derived from conjugated microporous polymer as an electrocatalytic platform for oxygen reduction reaction.

Porous iron-nitrogen-doped carbons (FeNC) offer a great platform for construction of cathodic oxygen reduction reaction (ORR) catalysts in fuel cells. However, challenges still remain regarding with the collapse of carbon-skeleton during pyrolysis, uneven distribution of active sites and aggregation of metal atoms. In this work, we synthesized Fe, N co-doped conjugated microporous polymer (FeN-CMP) through a facile bottom-up strategy using 1,3,5-triethynylbenzene and iron-chelated 3,8-dibromo-1,10-phenanthroline as monomers, ensuring the uniform coordination of N with Fe element in network. Then, the resulting FeN-CMP was treated by pyrolysis without structural collapse to obtain porous FeNC electrocatalyst for ORR. The most active catalyst was fabricated under 900 °C, which exhibits remarkable ORR activity in alkaline medium with half-wave potential of 0.796 V (18 mV and 105 mV positive deviation from the commercial Pt/C catalyst and post-doping catalyst), high selectivity with nearly 4e- transfer process and excellent methanol tolerance. Our study first developed porous FeNC electrocatalysts derived from Fe, N-anchoring CMPs based on pre-functionalization of monomers, which exhibits great potential as an alternative to commercial Pt/C catalyst for ORR, and provides a feasible strategy of developing multi-atoms doping catalysts for energy storage and conversion as well as heterogeneous catalysis.

Composite Flame Retardants Based on Conjugated Microporous Polymer Hollow Nanospheres with Excellent Flame Retardancy.

The development of polymer materials with excellent flame retardancy has been paid increasing attention for their valuable applications in saving energy in modern architecture. Herein, conjugated microporous polymers hollow nanospheres (CMPs-HNS) were prepared by Sonogashira-Hagihara cross-coupling reaction with 1,3,5-triacetylenebenzene, 3-amino-2,6-dibromopyridine, and 2,4,6-tribromoaniline as building blocks using SiO2 nanoparticles as hard templates. To enhance the flame-retardant performance of the CMPs-HNS, antimony pentoxide solution (Sb2O5) and bisphenol A-bis (diphenyl phosphate) (BDP) were coated onto the as-prepared CMP-HNS (CMPs-HNS-BSb) by a simple immersion method. The peak heat release (pHRR) from microscale combustion colorimeter (MCC) of CMPs-HNS-BSb was 76.5 and 73.05 W g-1, respectively. By introducing CMPs-HNS-BSb into the epoxy resin (EP) matrix, the CMP2-HNS-BSb/EP (0.5) composites show that the pHRR values were 809.3 and 645.2 kW m-2, reduced by 21% as measured by conical calorimetry (CC), and total heat release (THR) reduced by 29.7%, going from 101 to 70.8 MJ/m2 when compared to the pure sample. Besides, total smoke production (TSP) reduced about 23.7%. The hollow structure can enhance the thermal insulation performance. As measured, the thermal conductivity of CMP1-HNS-BSb and CMP2-HNS-BSb is 0.044 and 0.048 W m-1 K-1. Based on the advantages of simple manufacture, superior thermal insulation, and flame retardancy, our CMPs-HNS-BSb/EP composites may find useful applications in various aspects such as building energy saving in future development.

Recent advances and perspectives in solar photothermal conversion and storage systems: A review.

Developing high-efficiency solar photothermal conversion and storage (SPCS) technology is significant in solving the imbalance between the supply and demand of solar energy utilization in time and space. Aiming at the current research status in the field of SPCS, this review thoroughly examines the phase change materials and substrates in SPCS systems. It elucidates the design principles and methods of SPCS integrated composites. Comparatively, it analyzes the parameters of various types of SPCS composites in terms of photothermal conversion, thermal conductivity, energy density, and cycling stability. Additionally, the review discusses the trade-offs between each parameter to achieve the most optimal effect of SPCS. By sorting out the current status of the application of SPCS technology in solar thermal/photovoltaic, aerospace, buildings, textile, and other industries, this analysis clarifies the requirements for various latent heat, phase change temperature, and other properties under different environmental conditions. Through a comprehensive discussion of SPCS technology, this paper accurately captures the development trend of efficiently and comprehensively utilizing solar energy by analyzing existing scientific problems. It identifies bottlenecks in SPCS technology and suggests future development directions that need focused attention. The insights gained from this analysis may provide a theoretical basis for designing strategies, enhancing performance, and promoting the application of SPCS.

3D porous ß-cyclodextrin grafted graphene oxide/sodium alginate superhydrophilic natural polysaccharide-based aerogel for solar steam generation.

Solar steam generation (SSG) emerges as a paramount technology for efficient and sustainable desalination and wastewater purification. The innovative development of porous aerogel materials for solar steam generation heralds a new era in photothermal materials. In this study, a category of ß-cyclodextrin-grafted graphene oxide/sodium anionic polysaccharide alginate composite aerogels (named GO-CD/SA) with solar steam generation behavior and wastewater purification properties is developed. GO-CD/SA demonstrates remarkable properties, including an impressive solar absorption efficiency of approximately 97.4 %, a low thermal conductivity of just 0.124 W m-1 K-1 in a wetted state, and exceptional superhydrophilicity. These attributes collectively contribute to GO-CD/SA achieving an evaporation rate of 1.79 kg m-2 h-1 when utilized with pure water. Furthermore, GO-CD/SA features an abundant three-dimensional porous structure (88.07 % porosity) and superhydrophilic properties that promote the rapid reflux of salt solution between the pore channels. This, in turn, enables excellent salt resistance, with no noticeable salt crystals precipitating during continuous evaporation in 20 % high concentration brine for 6 h. GO-CD/SA also demonstrates outstanding purification capabilities for organic dye wastewater and heavy metal ion wastewater. Therefore, this work combines the advantages of salt tolerance and wastewater treatment, paving the way for the exploration of natural polysaccharide-based photothermal materials.

Carbonized CMPs Hollow Microspheres-Based Hydrogel Composite Membranes with a Hierarchical Architecture for Efficient Solar-Driven Interfacial Evaporation.

Solar-driven interfacial evaporation (SDIE) with excellent photothermal conversion efficiency is emerging as one of the frontier technologies for freshwater production. In this work, novel carbonized conjugate microporous polymers (CCMPs) hollow microspheres-based composite hydrogel membranes (CCMPsHM-CHM) for efficient SDIE are reported. The precursor, CMPs hollow microspheres (CMPsHM), is synthesized by an in situ Sonogashira-Hagihara cross-coupling reaction using a hard template method. The as-synthesized CCMPsHM-CHM exhibit significantly excellent properties, i.e., 3D hierarchical architecture (from micropore to macropore), superior solar light absorption (more than 89%), better thermal insulation (thermal conductivity as low as 0.32-0.42 W m-1K-1 in the wet state), superhydrophilic wettability with a water contact angle (WCA) of 0°, superior solar efficiency (up to 89-91%), a high evaporation rate of 1.48-1.51 kg m-2 h-1 under 1 sun irradiation, and excellent stability which maintains an evaporation rate of more than 80% after 10 cycles and over 83% evaporation efficiency in highly concentrated brine. In this case, the removal rate of metal ions in seawater is more than 99%, which is much lower than the ion concentration standard for drinking water set by the World Health Organization (WHO) and the United States Environmental Protection Agency (USEPA). Taking advantage of its simple and scalable manufacture, our CCMPsHM-CHM may have great potential as advanced membranes for various applications for efficient SDIE in different environments.

Fabrication of ATP/PEG/MnO2NWs composite for solar steam generation with high conversion efficiency.

Solar steam generation is widely used in seawater desalination because of its high efficiency and environmental protection. However, using low-cost materials to produce efficient solar evaporators is a severe challenge. In this study, a porous carbon material was prepared by combining Attapulgite (ATP), Polyethylene glycol (PEG) and Manganese dioxide nanowires (MnO2NWs) composite, through freeze-drying and high-temperature carbonization. The prepared CAPM aerogel shows a three-dimensional porous structure, which has high evaporation properties in pure water and simulated seawater. Under 1 sun simulated illumination, the pure water evaporation is 1.4574 kg m-2h-1 and the corresponding energy conversion efficiency is 85.94%. The prepared CAPM aerogel showed excellent durability and salt tolerance in 20%Nacl solution, indicating that the CAPM has excellent desalinization performance. In addition, CAPM aerogel has and exhibits super hydrophilic properties, which can transfer water molecules quickly. Due to the advantages of low cost, simple preparation method, and high solar energy conversion efficiency, the CAPM has excellent potential as a photothermal material for solar energy generation.

Mechanically robust conjugated microporous polymer membranes prepared using polyvinylpyrrolidone (PVP) electrospun nanofibers as a template for efficient PM capture.

Air pollution has become a challenging environmental problem worldwide due to rapid industrial development and excessive emissions of vehicle exhaust. Herein, we report a preparation of conjugated microporous polymer membranes (CMPM) with a hierarchical porous structure by electrospun polyvinylpyrrolidone (PVP) nanofibers as a template for effective removal of PM from airborne and vehicle exhaust. CMP membranes have hierarchical holes, where the macropores are from electrospun nanofiber membranes and the mesopores are from polymer synthesis. Taking advantage of its inherent physicochemical and thermal stability and hierarchical hole characteristics, the CMPM-based filter can work continuously for up to 36 h and still maintains a high removal efficiency (>99.56%), and also has a high filtration efficiency in the treatment of vehicle exhausts, with 95.18% for PM0.3, 98% for PM0.5 and >99% for PM2.5-10.0. The superior mechanical properties of CMPM allow the filter to be cleaned and reused. After three cycles, the filtration effectiveness of CMPM is still 94.83% for respirable particulate matter. Under high humidity (RH ≥ 95%) conditions, the CMPM-based filter showed higher than 95.37% filtration of PM0.3-10, and the oil adsorption rate could be maintained at 284% at high speed, proving the great potential of CMPM to clean air in complex situations.

ZnO nanorods loading with fatty amine as composite PCMs device for efficient light-to-thermal and electro-to-thermal conversion.

Phase change materials (PCMs) with ideal light-to-thermal conversion efficiency play an important role in solar energy storage and conversion. Hence, we report the fabrication of a novel composite PCMs (CPCMs) device based on ZnO nanorods deposited indium tin oxide (ITO) glass loading with fatty amines. ZnO nanorods were deposited on the ITO glass using a three-electrode electrodeposition method, and 1-Hexadecylamine (HDA) was loaded on the ITO glass via spin-coating, followed by spraying polypyrrole (ppy) on the surface of CPCM device to improve thermal conductivity and solar absorption. The as-prepared CPCM device exhibits excellent light-to-thermal conversion efficiency, achieving a high conversion efficiency of 90.2% obtained at 1sun owing to its high light absorption (80%), enhanced thermal conductivity (improved by 57.8%), and the unique vertical aligned nanorods structure which could significantly decrease tortuosity, thereby reducing thermal route and lowering thermal response time. Furthermore, the electro-to-thermal conversion efficiency of the CPCMs device has also been investigated and the results show that it can reach up to 69.8% under a low voltage of 5 V, indicating that the CPCM device has a high potential in the field of electro-to-thermal conversion. Based on the benefits listed above, the CPCM device may serve an ideal platform for a wide range of solar energy storage and conversion applications.

Nitrogen Deposition Amplifies the Legacy Effects of Plant Invasion.

The legacy effects of invasive plant species can hinder the recovery of native communities, especially under nitrogen deposition conditions, where invasive species show growth advantages and trigger secondary invasions in controlled areas. Therefore, it is crucial to thoroughly investigate the effects of nitrogen deposition on the legacy effects of plant invasions and their mechanisms. The hypotheses of this study are as follows: (1) Nitrogen deposition amplifies the legacy effects of plant invasion. This phenomenon was investigated by analysing four potential mechanisms covering community system structure, nitrogen metabolism, geochemical cycles, and microbial mechanisms. The results suggest that microorganisms drive plant-soil feedback processes, even regulating or limiting other factors. (2) The impact of nitrogen deposition on the legacy effects of plant invasions may be intensified primarily through enhanced nitrogen metabolism via microbial anaerobes bacteria. Essential insights into invasion ecology and ecological management have been provided by analysing how nitrogen-fixing bacteria improve nitrogen metabolism and establish sustainable methods for controlling invasive plant species. This in-depth study contributes to our better understanding of the lasting effects of plant invasions on ecosystems and provides valuable guidance for future ecological management.

A new current injection and voltage measurement strategy of 3D electrical impedance tomography based on scanning electrode.

Electrical impedance tomography (EIT) technology is an important imaging approach to show the conductivity distribution of the area noninvasively. Recently, 3D EIT has been extensively studied for its more comprehensive display of electrical properties. Nonetheless, most 3D EIT electrode models are based on multilayer ring electrodes and only suitable for specific scenarios. In order to overcome its limitations and alleviate the ill-condition of 3D EIT, we propose a new current injection and voltage measurement strategy based on scanning row electrodes (SRE) called the back electrode excitation (BEEM) strategy and select the optimal number of excitation electrodes according to different imaging effects. A 3D electrical impedance imaging system based on SRE is designed. Then, the traditional excitation measurement strategy is introduced, and the two strategies are compared through simulation and actual experiments. The results show that the BEEM strategy with SRE can not only obtain rich potential information in the finite field but also significantly improve the imaging detection depth, accuracy, and noise immunity compared with the flat electrode array.

Non-Precious Metal-Doped Carbon Materials Derived From Porphyrin-Based Porous Organic Polymers for Oxygen Reduction Electrocatalysis.

The cathodic oxygen reduction reaction (ORR) is important in the development of renewable energy devices, to produce novel and non-precious metal catalysts with high electrocatalytic activity to reduce the consumption of non-renewable platinum (Pt) catalyst. In this work, we developed N-doped and Fe/N dual-doped porous carbons as catalysts for ORR simply by high-temperature pyrolysis of porphyrin-based conjugated microporous polymers (CMPs). By combination of heteroatom doping, highly porous structure and tubular morphology, the as-prepared carbon samples exhibited high electrocatalytic activity with 4-electron transfer mechanism, nearly close to the commercial Pt/C catalyst. In particular, among these samples, the Fe/N-CMP-1000 displayed a higher onset potential (0.95 eV), positive half-wave potential (0.85 eV) and limiting current density value (5.1 mA cm-2 ) as well as good durability and better methanol tolerance contrasting with Pt/C catalyst, suggesting that the as-prepared metal-free catalysts from porphyrin-based CMPs show great potential for ORR.

Highly efficient solar photothermal conversion of graphene-coated conjugated microporous polymers hollow spheres.

Highly efficient harvesting, transfer, and storage of solar energy are of great significance for the sustainability of society Herein, we report the design and synthesis of conjugated microporous polymers hollow spheres (CMPs-HS) coated by graphene (GCMPs-HS) and compounded with the phase change material (PCM) octadecanol (GCMPs@ODA) for efficient solar photothermal conversion. The as-synthesized CMPs-HS shows a high specific surface (519.95 m2 g-1 and 309.26 m2 g-1), good thermostability, and lower thermal conductivity (0.33 W m-2h-1). By coating graphene, the light absorption remained about 90% in the visible light range, which allows light harvest for photothermal conversion. Taking the GCMPs-HS as a functional layer for the solar steam generation (SSG) system, a high evaporation efficiency of near 90% is obtained. After inhaling octadecanol, GCMPs@ODA are prepared and their latent heats are measured to about 217.4 J g-1 and 224.6 J g-1. Under 1 sun irradiation, the photothermal conversion efficiencies of GCMPs@ODA are measured to be 87.15% and 85.83%, the above merits applied in different conditions are superior to photothermal conversion materials reported in the literature. Thus, among the above merits, the fabricated materials are the competitive candidate which shows the great potential in the efficient application of solar energy.

Nitrogen-doping hollow carbon nanospheres derived from conjugated microporous polymers toward oxygen reduction reaction.

The exploitation non-precious or metal-free electrocatalysts of oxygen reduction reaction (ORR) is of significance for construction of next-generation fuel cells. In this work, hollow-spherical conjugated microporous polymers (CMPs) comprising porphyrin units were synthesized as precursors to prepare N-doping porous carbon spheres (CMP-NP-x) by a direct pyrolysis method. The as-resulted CMP-NP-x exhibited spherical morphology with hollow structure similar to that of CMPs precursors. The BET surface area of CMP-NP-x can be tailored by the pyrolysis temperature varying from 868 m2 g-1 to 1118 m2 g-1. According to XPS analysis, the pyrrolic N content in the sample decreased but the graphitic N and pyridinic N increased with increasing of the pyrolysis temperature from 800 °C to 1000 °C. Taking advantages of porous structure with large accessible surface areas and N species active sites, the resulting CMP-NP-x showed superior ORR activity and methanol tolerance to commercial Pt/C catalyst. In particular, CMP-NP-900 possesses the highest onset potential (0.930 V), half-wave potential (0.857 V) and limiting current density of 4.45 mA cm-2, compared with Pt/C catalyst and other samples, making it a promising metal-free catalyst superior to commercial Pt/C catalyst in alkalic condition.

Holey Ti3C2 nanosheets based membranes for efficient separation and removal of microplastics from water.

The accumulation of non-degradable microplastics (MPs) originated from the mass production and huge consumption of plastics of modern industry in the water environment has resulted in severe pollution problems globally. Herein, we report for the first time the preparation of holey Ti3C2Tx (h-Ti3C2Tx) membranes obtained by etching Co3O4 nanoparticles embedded on Ti3C2Tx nanosheets followed by simple vacuum filtration using polymeric membranes as supporting matrix for efficient removal of MPs from wastewater. The h-Ti3C2Tx nanosheets exhibit a planar porous structure which present nano-holes with an average hole-size of 25 nm in diameter, which facilitated the construction of membranes with better water flux for the separation of MPs. Using fluorescent PS (FP) microspheres of different diameters as microplastic models, the obtained h-Ti3C2Tx membranes exhibited extremely high MPs removal performance (up to 99.3% under our conditions). Moreover, a large water flux of 196.7 L h-1 m-2 k Pa-1 can be obtained, which can compete or be larger than that of most of the membranes composed of untreated two-dimension nanomaterials. Due to the physicochemical stability, tremendous large water reflux, and the high MPs removal efficiency of h-Ti3C2Tx membranes, there may be a great potential for practical applications in the separation and removal of various contaminants such as MPs or suspended solids from water.

Magnesium hydroxide coated hollow glass microspheres/chitosan composite aerogels with excellent thermal insulation and flame retardancy.

The development of an environmental-friendly thermal insulation and flame retardant material has attracted widespread attention in modern architecture. In this work, a kind of novel aerogel composites were prepared by incorporation of Mg(OH)2 coated hollow glass microspheres (HGM) into chitosan (CSA) matrix and then cross-linking by glutaraldehyde (abbreviated as CSA-HGM-Mg(OH)2). The as-prepared composite aerogel exhibits vertical directional channel with high porosity and excellent thermal insulation with a low thermal conductivity of 0.035 W m-1 k-1. Besides, it shows excellent flame retardancy with a high limit oxygen index (LOI) value up to 50.8, which is one of the highest values among the most of flame retardants reported previously. Also, a very low peak heat release rate (pHRR) of 24.12 kW m-2 was obtained which makes the aerogel composite reaching UL-94 V-0 rating. Such results may be attributed to a synergy effect by combination of its abundantly porous structure derived from HGM to give a better thermal insulation and excellent nonflammability of CSA and Mg(OH)2 to offer a superior flame retardancy. Taking advantages of its high mechanical strength, low cost materials, simple and scalable preparation method, CSA-HGM-Mg(OH)2 aerogel composites may hold great potential for future thermal insulation and flame retardant applications.

Enhanced light-to-thermal conversion performance of all-carbon aerogels based form-stable phase change material composites.

The exploitation of excellent performance form-stable phase change material composites (FS-PCMCs) with enhanced photothermal conversion efficiency and high phase change latent heat is of great significance for thermal energy storage. In this work, a new type of FS-PCMCs with superior light-to-thermal conversion performance were created by impregnation of organic phase change material (1-hexadecylamine (HDA) and 1-tetradecylamine (TDA)) into the graphene aerogel (GA) and all-carbon aerogel (GCA) through a simple direct infusion. The multiwalled carbon nanotubes (MWCNTs) are wound around the inner wall of the GA layer to form a three-dimensional (3D) porous network structure to support fatty amine (FAs), thus achieving shape stability before and after phase transition. Moreover, the FS-PCMCs has extremely high phase transition enthalpy (203.1-248 kJ·kg-1) and good recyclability. More importantly, due to the high absorbance of GCA, it can enhance its light absorption capacity and reduce thermal radiation. The light-to-thermal conversion efficiency of the FS-PCMCs is 72.36%-88.25%. Taking the improvement of the comprehensive properties of the FS-PCMCs, the results of this work may open up a way for rational design and preparation of high-performance FS-PCMCs with enhanced storage capacity and light-to-thermal conversion efficiency for the efficient utilization of solar energy.

Efficient capture of airborne PM by nanotubular conjugated microporous polymers based filters under harsh conditions.

The exploitation of high-performance filters which can capture and remove airborne particulate matter (PM) in harsh conditions is greatly important to limit the serious effect of PM on human health. Herein, we demonstrate a simple approach for the creation of robust and hierarchically porous filters based on conjugated microporous polymers (CMPs) nanotubes for efficient PM capture. Taking advantage of their inherently superhydrophobic wettability, the CMPs-based filters possess high filtration efficiency of higher than 99.4% for PM0.3 and 99.9% for PM2.5 and PM10, respectively, even in high humidity environment (RH ≥ 94%). The CMPs-based filters show highly physicochemical and thermal stability, e.g., by calcination at 500 °C for 2 h, the filtration efficiency of the samples still reaches as great as 99.4% for both PM2.5 and PM10 with a low-pressure drop of only 10 Pa. In addition, these CMPs-based filters can be easily regenerated and their high PM filtration efficiency remains nearly unchanged by a simple methanol washing. More interestingly, the CMPs-based filters also exhibit superior antibacterial performance, which enables them to sterilize or eliminate the bacteria possibly loaded on PM pollutions, thus showing great potential for various applications such as PM removal, air purification and so on.

Fe3O4/PPy-Coated Superhydrophilic Polymer Porous Foam: A Double Layered Photothermal Material with a Synergistic Light-to-Thermal Conversion Effect toward Desalination.

Solar steam generation has been considered as one of the most promising strategies for production of fresh water using renewable solar energy. Herein, we prepared a polymer porous foam (HPSS) by a facile hydrothermal method. The HPSS presents a superhydrophilic wettability, an interpenetrating macroporous structure, and low thermal conductivity, which can well satisfy the criteria as an ideal candidate for photothermal materials. The HPSS/Fe3O4/PPy (polypyrrole) evaporator, of which a Fe3O4/PPy binary optical system served as a light absorption layer and HPSS was used as a porous substrate, was constructed through in situ growth of Fe3O4 particles followed by interfacial polymerization of PPy on the surface of HPSS. HPSS/Fe3O4/PPy shows an excellent light absorption capacity (92%) and photothermal conversion performance, with the solar energy conversion efficiency reaching up to 94.7% under 1 sun irradiation, which is much higher than that of HPSS/PPy (84.8%) composed of a unitary PPy light absorption layer. Interestingly, the presence of Fe3O4 particles could make directional migration in a magnetic field possible, thus facilitating its recovery as a self-floating solar generator in an open water area. Moreover, the HPSS/Fe3O4/PPy evaporator displays outstanding salt resistance properties and stability in various saline solutions, thus having great potential in practical desalination.

Superwetting Electrospun PDMS/PMMA Membrane for PM2.5 Capture and Microdroplet Transfer.

Efficient acquiring and removal of a hazardous particulate matter (PM) have significant effects on human health. Here, we illustrate the fabrication of a superwetting electrospun polydimethylsiloxane/polymethyl methacrylate (PDMS/PMMA) membrane (EPPM) with multifunctional performance for PM2.5 capture and microdroplet transfer, where PMMA was added as a carrier polymer to the superhydrophobic PDMS, which has very low cohesive energy density. The obtained EPPM, which is composed of special bead-on-string fibers with a mean fiber diameter of 350 nm, shows a porous structure with an aperture of 7.87 µm (calculated by the bubble pressure method) and superb thermostability (up to 325 °C). The EPPM possesses an excellent PM2.5 purification efficiency of nearly up to 100% at a very low pressure drop (70 Pa, <0.07% of the atmospheric pressure) under the condition of high humidity (96 ± 3%), which is greatly advantageous over those hydrophilic filters frequently suffering the drawbacks of low efficiency or total invalidation in humid environments. In addition, benefitting from the superhydrophobic and strong adhesive properties of the membrane surface, the EPPM could complete the trace aqueous sample analysis such as "robotic hand" from superhydrophobic to hydrophilic surfaces without any contamination or loss and hold a high contact angle of 161.6° for water. Altogether, the EPPM may have technological advantages as a kind of novel fibrous filter in diverse environmental applications, including PM2.5 capture, separation, microdroplet transfer, and so on.