Structures, gelatinization properties and enzyme hydrolyses of starches from transparent and floury grains of rices subjected to field natural extreme high temperature.

Three rice varieties underwent the field natural extreme high temperature (EHT) with daily average temperature over 30 °C from 21 to 89 days after sowing, and had transparent, chalky and floury grains. The structures, gelatinization properties and enzyme hydrolyses of starches from transparent and floury grains were investigated. Compared with control transparent grains, floury grains subjected to EHT markedly decreased the contents of amylose molecules, amylopectin A chains and amylopectin B1 chains and increased the contents of amylopectin B2 and B3+ chains and the average branch-chain length of amylopectin. Both transparent and floury grains had A-type starches, but floury grain starches exhibited higher relative crystallinity, gelatinization temperature, retrogradation and pasting viscosities than transparent grain starches. Floury grain starches had lower hydrolysis rates than transparent grain starches. Native starches were more resistant to digestion but gelatinized and retrograded starches were more prone to digestion in floury grains than in transparent grains.

Executive compensation and corporate sustainability: Evidence from ESG ratings.

Selecting A-share listed companies in Shanghai and Shenzhen, China, during the period of 2012-2021 as research subjects, this study examines the relationship and operational mechanisms between executive compensation and corporate ESG Ratings. It is found that executive compensation incentives can significantly enhance corporate ESG Ratings. This effect is achieved through promoting green innovation efficiency, enhancing environmental information disclosure, and improving financial performance. However, this positive impact weakens with an increase in management shareholding, but strengthens with a higher proportion of independent directors. When compensation exceeds appropriate levels, overcompensation leads to a decline in ESG Ratings. The significance of this study lies in revealing potential pathways for enhancing corporate sustainability through executive compensation incentives, while also emphasizing the importance of formulating appropriate compensation strategies.

Gut microbiota modulating intestinal stem cell differentiation.

Proliferation and differentiation of intestinal stem cell (ISC) to replace damaged gut mucosal epithelial cells in inflammatory states is a critical step in ameliorating gut inflammation. However, when this disordered proliferation continues, it induces the ISC to enter a cancerous state. The gut microbiota on the free surface of the gut mucosal barrier is able to interact with ISC on a sustained basis. Microbiota metabolites are able to regulate the proliferation of gut stem and progenitor cells through transcription factors, while in steady state, differentiated colonocytes are able to break down such metabolites, thereby protecting stem cells at the gut crypt. In the future, the gut flora and its metabolites mediating the regulation of ISC differentiation will be a potential treatment for enteropathies.

Critical appraisal and assessment of bias among studies evaluating risk prediction models for in-hospital and 30-day mortality after percutaneous coronary intervention: a systematic review.

OBJECTIVE: We systematically assessed prediction models for the risk of in-hospital and 30-day mortality in post-percutaneous coronary intervention (PCI) patients. DESIGN: Systematic review and narrative synthesis. DATA SOURCES: Searched PubMed, Web of Science, Embase, Cochrane Library, CINAHL, CNKI, Wanfang Database, VIP Database and SinoMed for literature up to 31 August 2023. ELIGIBILITY CRITERIA: The included literature consists of studies in Chinese or English involving PCI patients aged ≥18 years. These studies aim to develop risk prediction models and include designs such as cohort studies, case-control studies, cross-sectional studies or randomised controlled trials. Each prediction model must contain at least two predictors. Exclusion criteria encompass models that include outcomes other than death post-PCI, literature lacking essential details on study design, model construction and statistical analysis, models based on virtual datasets, and publications such as conference abstracts, grey literature, informal publications, duplicate publications, dissertations, reviews or case reports. We also exclude studies focusing on the localisation applicability of the model or comparative effectiveness. DATA EXTRACTION AND SYNTHESIS: Two independent teams of researchers developed standardised data extraction forms based on CHecklist for critical Appraisal and data extraction for systematic Reviews of prediction Modelling Studies to extract and cross-verify data. They used Prediction model Risk Of Bias Assessment Tool (PROBAST) to assess the risk of bias and applicability of the model development or validation studies included in this review. RESULTS: This review included 28 studies with 38 prediction models, showing area under the curve values ranging from 0.81 to 0.987. One study had an unclear risk of bias, while 27 studies had a high risk of bias, primarily in the area of statistical analysis. The models constructed in 25 studies lacked clinical applicability, with 21 of these studies including intraoperative or postoperative predictors. CONCLUSION: The development of in-hospital and 30-day mortality prediction models for post-PCI patients is in its early stages. Emphasising clinical applicability and predictive stability is vital. Future research should follow PROBAST's low risk-of-bias guidelines, prioritising external validation for existing models to ensure reliable and widely applicable clinical predictions. PROSPERO REGISTRATION NUMBER: CRD42023477272.

G × E × M analysis to define allometric rules between leaves and stems in wheat.

Allometric rules provide insights into the structure-function relationships across species and scales and are commonly used in ecology. The fields of agronomy, plant phenotyping and modeling also need simplifications such as allometric rules to reconcile data at different temporal and spatial levels (organs/canopy). This paper explores the variations in relationships for wheat regarding (i) the distribution of crop green area between leaves and stems, and (ii) the allocation of above-ground biomass between leaves and stems during the vegetative period, using a large dataset covering different years, countries, genotypes and management practices. Our results show that the relationship between leaf and stem area was linear, genotype-specific, and sensitive to radiation. The relationship between leaf and stem biomass depended on genotype and nitrogen fertilization. The mass per area, associating area and biomass for both leaf and stem, varied strongly by developmental stage and was significantly affected by environment and genotype. These allometric rules were evaluated with satisfactory performance, and their potential use is discussed with regard to current phenotyping techniques and plant/crop models. Our results enable the definition of models and minimum datasets required for characterizing diversity panels and making predictions in various G × E × M contexts.

Rapid and dynamic detection of endogenous proteins through in-locus tagging in rice.

Understanding the behavior of endogenous proteins is crucial for functional genomics, yet their dynamic characterization in plants presents substantial challenges. While mammalian studies have leveraged in-locus tagging with the luminescent HiBiT peptide and genome editing for rapid quantification of native proteins, this approach remained unexplored in plants. Here, we introduce the in-locus HiBiT tagging of rice proteins and demonstrate its feasibility in plants. We found that although traditional HiBiT blotting works in rice, it failed to detect two of the three tagged proteins, which is attributed to the low luminescence activity in plants. To overcome this limitation, we engaged in extensive optimization, culminating in a new luciferin substrate coupled with a refined reaction protocol that enhanced luminescence by up to 6.9-fold. This innovation led to the development of TagBIT (tagging with HiBiT), a robust method for high-sensitivity protein characterization in plants. Our application of TagBIT to seven rice genes illustrates its versatility on endogenous proteins, enabling antibody-free protein blotting, real-time protein quantification via luminescence, in-situ visualization using a cross-breeding strategy, and effective immunoprecipitation for protein interaction analysis. The heritable nature of this system, confirmed across T1 to T3 generations, positions TagBIT as a powerful tool for protein study in plant biology.

Case report and brief literature review: possible association of secukinumab with Guillain-Barré syndrome in psoriasis.

The etiology of Guillain-Barré syndrome (GBS) may be autoimmune. About two-thirds of patients typically experience their first symptoms within 5 days to 3 weeks after common infectious diseases, surgery, or vaccination. Infection is a triggering factor for over 50% of patients. In recent years, a growing number of studies have indicated that some immune checkpoint inhibitors and COVID-19 may also contribute to the occurrence of GBS. However, drugs are considered a rare cause of GBS. The patient in our case was a 70-year-old man who developed GBS after initiating secukinumab for psoriasis. Upon diagnosis suggesting a potential association between secukinumab and the development of GBS, as per the Naranjo adverse drug reaction (ADR) probability scale, we decided to discontinue the drug. Following this intervention, along with the administration of immunoglobulin, the patient exhibited a significant improvement in extremity weakness. The association of GBS with secukinumab treatment, as observed in this case, appears to be uncommon. The underlying mechanisms that may link secukinumab to the development of GBS are not yet fully understood and warrant further scientific inquiry and rigorous investigation. However, we hope that this report can raise greater awareness and vigilance among medical professionals to enhance the safety of patients' medication.

Challenges in Residual Bearing Removal: A Rare Case of Mobile Bearing Fracture in Unicompartmental Knee Arthroplasty with Literature Review.

BACKGROUND: Mobile bearing fracture is a rare long-term complication of unicompartmental knee arthroplasty (UKA), and relevant reports are sparse. Hence, its treatment options need further exploration. CASE PRESENTATION: This study presents the case of fracture of a polyethylene insert that occurred 12 years after mobile bearing medial UKA in a 75-year-old overweight woman who then underwent surgical intervention at our institution. However, we encountered significant challenges in removing the fragments from the broken bearing, resulting in retention of the remaining one-third of the fragment. We solved this problem by replacing the fractured insert with thicker mobile bearing. During the 1-month postoperative follow-up, the patient achieved good range of motion and excellent satisfaction, with no reported complications and a Knee Society Score of 90. Additionally, we reviewed the literature on the treatment for mobile bearing fractures after UKA. CONCLUSIONS: Bearing fracture is a rare cause of failure of mobile bearing UKA. This case highlights the challenges of UKA fracture bearing retrieval and underscores that mobile bearing replacement can be an effective intervention. The case we report shows that when removal of a residual meniscal bearing in a posterior dislocation is difficult to achieve, compromise may be an appropriate option because it does not cause additional complaints to the patient. This case emphasizes the importance of the surgeon having a thorough preoperative understanding of the location and potential pitfalls of fracture fragments in such situations.

Preparation of a novel type I feline coronavirus virus-like particle vaccine and its immunogenicity in mice and cats.

Feline coronavirus (FCoV) infection is a leading cause of death in cats. In this study, we produced FCoV-I virus-like particles (VLPs) containing E, M, N, and S proteins using a baculovirus expression system and mixed VLPs with the adjuvants MF59 and CpG 55.2 to prepare an VLP/MF59/CpG vaccine. After immunization of mice with the vaccine, IgG specific antibodies titers against S and N proteins increased to 1:12,800, and IFN-γ+ and IL-4+ splenocytes were significantly increased. Following immunization of FCoV-negative cats, the S protein antibodies in immunized cats (5/5) increased significantly, with a peak of 1:12,800. Notably, after booster vaccination in FCoV-positive cats, a significant reduction in viral load was observed in the feces of partial cats (4/5), and the FCoV-I negative conversion was found in two immunized cats (2/5). Therefore, the VLP/MF59/CpG vaccine is a promising candidate vaccine to prevent the FCoV infection.

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop.

A novel fiber Bragg grating (FBG) sensing system, based on an optically injected distributed feedback laser diode (DFB-LD) with an optoelectronic oscillating (OEO) loop, is proposed and experimentally demonstrated for temperature measurements with high and tunable sensitivity. The FBG sensor device works as an edge filter to adjust the optical power of the injected beam in response to temperature variations. The optically injected DFB-LD works at Period-one (P1) oscillating state, and the central wavelength of the oscillating mode of the DFB-LD can be tuned by the variable power of the injected beam. Furthermore, an OEO loop is implemented to improve the signal quality of the generated P1 microwave signal. Hence, the sensing parameter of temperature is converted to the frequency variation of the generated P1 microwave signal in the proposed sensing system. In the proof-of-concept experiment, a series of P1 microwave signals are generated while different temperatures are applied to the FBG sensor. The sensitivity of the proposed FBG sensing system for temperature measurements can be tuned from 0.44322 GHz/°C to 1.25952 GHz/°C. The stability and repeatability experiments are also performed, demonstrating the high measurement accuracy (0.0629°C) and low error of the system. The proposed FBG-based sensing and interrogation system exhibits high sensitivity, large tunability, good linearity, and flexible sensing generality.

Fast and robust demodulation of temperature from sparse sapphire fiber Bragg grating spectra with machine learning.

Sapphire fiber Bragg gratings (FBGs) have demonstrated their efficacy in sensing at high-temperature harsh environments owing to their elevated melting point and outstanding stability. However, due to the extremely high volume of modes supported by the clad-less sapphire fiber, the demodulation capability of the reflected spectra is hindered due to their irregular and somewhat complicated shapes. Hence, a mode-stripping or scrambling step is typically employed beforehand, albeit at the expense of sensor robustness. Additionally, conventional interrogation of sapphire FBG sensors relies on an optical spectrum analyzer due to the high sensitivity provided by the spectrum analyzer, where the long data acquisition time restricts the system from detecting instantaneous temperature variations. In this study, we present a simple sensor configuration by directly butt-coupling the sapphire FBG multi-mode lead-out fiber to a single-mode lead-in fiber, and detect its reflected spectra via a low-cost, fast, and coarsely resolved (166 pm) spectrometer. We leverage machine learning to compensate for the under-sampling of the measured FBG spectra and achieve a temperature accuracy of 0.23 °C at a high data acquisition rate of 5 kHz (limited by the spectrometer). This represents a tenfold improvement in accuracy compared to conventional peak-searching and curve-fitting methods, as well as a significant enhancement in measurement speed that enables dynamic sensing. We further assess the robustness of our sensor by attaching one side of the sensor to a vibrator and still observe good performance (0.43 °C) even under strong shaking conditions. The introduced demodulation technology opens up opportunities for the broader use of sapphire FBG sensors in noisy and high-temperature harsh environments.

Radical-Mediated α-tert-Alkylation of Aldehydes by Consecutive 1,4- and 1,3-(Benzo)thiazolyl Migrations.

The direct alkylation of the α-position of aldehydes is an effective method for accessing a wide range of structurally diverse aldehydes, yet tert-alkylation has proven to be a challenging task. In this study, we present a novel radical-mediated tert-alkylation approach targeting the α-position of aldehydes, enabling the synthesis of complex aliphatic aldehydes. The transformation is initiated by the interaction between an in situ generated enamine intermediate and α-bromo sulfone, forming an electron donor-acceptor (EDA) complex, followed by consecutive 1,4- and 1,3-functional group migrations. This protocol operates under metal-free and mild photochemical conditions, delivering a broad scope of products and providing new mechanistic insights into radical rearrangement reactions.

Mussel-Derived and Bioclickable Peptide Mimic for Enhanced Interfacial Osseointegration via Synergistic Immunomodulation and Vascularized Bone Regeneration.

Inadequate osseointegration at the interface is a key factor in orthopedic implant failure. Mechanistically, traditional orthopedic implant interfaces fail to precisely match natural bone regeneration processes in vivo. In this study, a novel biomimetic coating on titanium substrates (DPA-Co/GFO) through a mussel adhesion-mediated ion coordination and molecular clicking strategy is engineered. In vivo and in vitro results confirm that the coating exhibits excellent biocompatibility and effectively promotes angiogenesis and osteogenesis. Crucially, the biomimetic coating targets the integrin α2ß1 receptor to promote M2 macrophage polarization and achieves a synergistic effect between immunomodulation and vascularized bone regeneration, thereby maximizing osseointegration at the interface. Mechanical push-out tests reveal that the pull-out strength in the DPA-Co/GFO group is markedly greater than that in the control group (79.04 ± 3.20 N vs 31.47 ± 1.87 N, P < 0.01) and even surpasses that in the sham group (79.04 ± 3.20 N vs 63.09 ± 8.52 N, P < 0.01). In summary, the novel biomimetic coating developed in this study precisely matches the natural process of bone regeneration in vivo, enhancing interface-related osseointegration and showing considerable potential for clinical translation and applications.

Radiographic evaluation of robot-assisted versus manual total hip arthroplasty: a multicenter randomized controlled trial.

BACKGROUND: The effectiveness of robot-assisted surgery remains contentious due to the lack of high-quality randomized controlled trials (RCTs) to elevate the level of evidence. We aimed to evaluate the postoperative radiographic outcomes of robot-assisted (RAS-THA) versus manual (M-THA) total hip arthroplasty. METHODS: This multicenter RCT was performed from March 1, 2021 to December 1, 2021. Patients were randomly assigned to routine M-THA or to RAS-THA that used the TRex-RS orthopedic joint surgical navigation system. The primary outcome was to compare the acetabular component orientation, femoral stem alignment, femoral canal fill ratio, and leg length discrepancy between RAS-THA and M-THA using postoperative radiography. Subgroup analyses of the two groups stratified by surgical approach, gender, and BMI were also conducted. RESULTS: Seventy-three participants were randomly allocated to the RAS-THA group, while seventy-two participants were assigned to the M-THA group. Compared to the M-THA group, the RAS-THA group exhibited less variability in the preoperative planning of the vertical center of rotation (VCOR; P < 0.001), demonstrated a significant advantage in femoral stem alignment (P = 0.004), and showed pronounced decreases in inequality and in the variability in leg length discrepancy (P < 0.001). There was no significant difference in the Lewinnek safe-zone ratio (P = 0.081) and the femoral canal fill ratio (P > 0.05) between the two groups. Further subgroup analysis also showed that the RAS-THA group had fewer horizontal center of rotation (HCOR) and leg length differences when stratified by surgical approach, gender, and overweight status. CONCLUSION: This RCT found that, regardless of the surgical approach, gender, or body mass index, RAS-THA can effectively improve the postoperative VCOR and significantly reduce the variability of leg length difference. RAS-THA should be considered an effective method to enhance surgical precision by achieving less variability in challenging patients with leg length discrepancies. TRIAL REGISTRATION: ChiCTR2100044124.

The receptor kinase OsANX limits precocious flowering and inflorescence over-branching and maintains pollen tube integrity in rice.

CrRLK1L subfamily members are involved in diverse growth- and development-related processes in Arabidopsis. However, the functions of their counterparts in rice are unknown. Here, OsANX expression was detected in developing inflorescences, mature pollen grains, and growing pollen tubes, and it was localized to the plasma membrane in pollen grains and tobacco epidermal cells. Homozygous osanx progeny could not be segregated from the CRISPR/Cas9-edited mutants osanx-c1+/- and osanx-c2+/-, and such progeny were segregated only occasionally from osanx-c3+/-. Further, all three alleles showed osanx male but not female gamete transmission defects, in line with premature pollen tube rupture in osanx-c3. Additionally, osanx-c3 exhibited precocious flowering, excessively branched inflorescences, and an extremely low seed setting rate of 1.4 %, while osanx-c2+/- and osanx-c3+/- had no obvious defects in inflorescence development or the seed setting rate compared to wild-type Nipponbare (Nip). Consistent with this, the complemented line pPS1:OsANX-GFP/osanx-c2 (PSC), in which the lack of OsANX expression was inflorescence-specific, showed slightly earlier flowering and overly-branched panicles. Multiple inflorescence meristem transition-related and inflorescence architecture-related genes were expressed at higher levels in osanx-c3 than in Nip; thus, they may partially account for the aforementioned mutant phenotypes. Our findings broaden our understanding of the biological functions of OsANX in rice.

Deciphering the performance of macrophages in tumour microenvironment: a call for precision immunotherapy.

Macrophages infiltrating tumour tissues or residing in the microenvironment of solid tumours are known as tumour-associated macrophages (TAMs). These specialized immune cells play crucial roles in tumour growth, angiogenesis, immune regulation, metastasis, and chemoresistance. TAMs encompass various subpopulations, primarily classified into M1 and M2 subtypes based on their differentiation and activities. M1 macrophages, characterized by a pro-inflammatory phenotype, exert anti-tumoural effects, while M2 macrophages, with an anti-inflammatory phenotype, function as protumoural regulators. These highly versatile cells respond to stimuli from tumour cells and other constituents within the tumour microenvironment (TME), such as growth factors, cytokines, chemokines, and enzymes. These stimuli induce their polarization towards one phenotype or another, leading to complex interactions with TME components and influencing both pro-tumour and anti-tumour processes.This review comprehensively and deeply covers the literature on macrophages, their origin and function as well as the intricate interplay between macrophages and the TME, influencing the dual nature of TAMs in promoting both pro- and anti-tumour processes. Moreover, the review delves into the primary pathways implicated in macrophage polarization, examining the diverse stimuli that regulate this process. These stimuli play a crucial role in shaping the phenotype and functions of macrophages. In addition, the advantages and limitations of current macrophage based clinical interventions are reviewed, including enhancing TAM phagocytosis, inducing TAM exhaustion, inhibiting TAM recruitment, and polarizing TAMs towards an M1-like phenotype. In conclusion, while the treatment strategies targeting macrophages in precision medicine show promise, overcoming several obstacles is still necessary to achieve an accessible and efficient immunotherapy.

Progressive Ataxia due to de novo Missense Variants in the CACNA1A Gene.

The CACNA1A gene encodes the alpha-1A subunit of P/Q type voltage-gated calcium channel Cav2.1, which is associated with a broad clinical spectrum and variable symptomatology. While few patients with progressive ataxia caused by CACNA1A missense variants have been reported, here we report three unrelated Chinese patients with progressive ataxia due to de novo missense variants in the CACNA1A gene, including a novel pathogenic variant (c.4999C > G) and a previously reported pathogenic variant (c.4037G > A). Our findings and a systematic literature review show the unique phenotype of progressive ataxia caused by missense variants and enlarge the genetic and clinical spectrum of CACNA1A. This suggests that in addition to routine screening for dynamic mutations, screening for CACNA1A variants is important for clinicians facing patients with progressive ataxia.

Total Hip Arthroplasty Combined with Proximal Femoral Reconstruction Effectively Treats Severe Hip Deformities: A Novel Osteotomy Technique.

OBJECTIVE: Total hip arthroplasty (THA) combined with proximal femoral reconstruction is a novel osteotomy technique developed to address severe hip deformities. There is a paucity of robust clinical and radiological evidence regarding the outcomes of this novel osteotomy technique. This study aimed to evaluate the clinical and radiological outcomes of THA combined with proximal femoral reconstruction during the early follow-up. METHODS: This is a retrospective case series of 63 hips who underwent THA combined with proximal femoral reconstruction at a single institution between January 2020 and July 2023. The mean age of patients was 39.6 ± 12.6 years. The mean follow-up was 25.6 ± 3.8 months. Surgical characteristics and perioperative variables were evaluated to assess the efficacy of this technique. Harris hip score (HHS) was utilized to evaluate hip function. Leg length discrepancy (LLD) was evaluated in X-ray. The incidence of major adverse events including deep vein thrombosis (DVT), osteolysis, nonunion of the osteotomy, intraoperative femoral fracture, and infection was also evaluated. Paired-samples t-test was used to compare preoperative and postoperative HHS and LLD. RESULTS: The mean operative time was 125.1 min. The mean size of the acetabular components used was 45.2 mm, and the stem size was 7.5. The primary friction interface was ceramic-on-ceramic, accounting for 92.1% of cases. The average length of hospital stay was 8.5 days. The mean cost of treatment was 46,296.0 Yuan. There was a significant improvement in postoperative HHS (p < 0.001) and LLD (p < 0.001) compared to preoperative values. The incidence of deep venous thrombosis was 4.8%; osteolysis rates for the cup and stem were 4.8% and 6.4%, respectively. The non-union and dislocation rates were 1.6% and 3.2%, respectively. There was no incidence of postoperative infection. CONCLUSION: The novel osteotomy surgical procedure yields reliable and impressive clinical and radiological outcomes, with minimal complications. We advocate for its use in complex primary THA cases involving severe proximal femoral deformities.

Development and evaluation of a risk prediction tool for risk-adapted screening of colorectal cancer in China.

Risk prediction tools for colorectal cancer (CRC) have potential to improve the efficiency of population-based screening by facilitating risk-adapted strategies. However, such an applicable tool has yet to be established in the Chinese population. In this study, a risk score was created using data from the China Kadoorie Biobank (CKB), a nationwide cohort study of 409,854 eligible participants. Diagnostic performance of the risk score was evaluated in an independent CRC screening programme, which included 91,575 participants who accepted colonoscopy at designed hospitals in Zhejiang Province, China. Over a median follow-up of 11.1 years, 3136 CRC cases were documented in the CKB. A risk score was created based on nine questionnaire-derived variables, showing moderate discrimination for 10-year CRC risk (C-statistic = 0.68, 95 % CI: 0.67-0.69). In the CRC screening programme, the detection rates of CRC were 0.25 %, 0.82 %, and 1.93 % in low-risk (score <6), intermediate-risk (score: 6-19), and high-risk (score >19) groups, respectively. The newly developed score exhibited a C-statistic of 0.65 (95 % CI: 0.63-0.66), surpassing the widely adopted tools such as the Asia-Pacific Colorectal Screening (APCS), modified APCS, and Korean Colorectal Screening scores (all C-statistics = 0.60). In conclusion, we developed a novel risk prediction tool that is useful to identify individuals at high risk of CRC. A user-friendly online calculator was also constructed to encourage broader adoption of the tool.

Outcomes of a Double-Cup Construct to Treat Paprosky 3A and 3B Acetabular Defects at a Mean of 39 Months.

BACKGROUND: Modular reconstruction systems based on porous tantalum (PT) prosthetic components have been increasingly used for the treatment of complex acetabular bone defects in revision total hip arthroplasty. We report a novel technique that applies a revision cup as a "super-augment" to form a "double-cup" construct for Paprosky type III defects. METHODS: A retrospective review was conducted on revision total hip arthroplasty cases, comparing those treated with double-cup constructs (DC group, n = 48) to those treated with PT shells and augments (PT group, n = 48). All procedures were performed at the same institute between 2017 and 2022. Clinical outcome evaluation utilized the Harris Hip Score, Oxford Hip Score, and the 36-Item Short Form Survey. Preoperative and postoperative radiographic assessments measured hip center of rotation (COR) position and leg length discrepancy. Additionally, postoperative complications and implant survivorship were monitored during the follow-up period. RESULTS: The clinical outcomes improved substantially in both groups, which showed no significant difference in the Harris Hip Score (P = .786), the Oxford Hip Score (P = .570), and the 36-Item Short Form Survey (P = .691). Compared to the PT group, the reconstruction COR was significantly closer to the anatomic COR (vertical distance: 2.630 versus 7.355 mm, P = .0034; horizontal distance: 1.881 versus -6.413 mm, P < .0001) in Paprosky 3B type defects. Additionally, postoperative leg length discrepancy was less in the DC group (-8.252 versus -1.821 mm, P = .0008). Dislocation was the main complication in the DC group, and only 1 patient received re-revision due to repeated dislocation. The cumulative survival rate of the DC group (100%; 95% confidence interval 100) was better than the PT group (83.4%; 95% confidence interval 70.5 to 98.6) when re-revisions for aseptic loosening were the endpoint (P = .046). CONCLUSIONS: The DC is a reliable revision technique for the reconstruction of Paprosky type III bone defects. Although dislocation remains challenging, the biomechanically superior restoration achieved by this technique lowers the risk of aseptic loosening.