Production of Resistant Starch by Roasting Retrograded Starch with Glucose.

Starch is a natural plant raw material applicable in many areas of industry. In practice, it is most often used in a modified form, i.e., after various treatments aimed at modifying its properties. Modifications of native starch enable producing resistant starch, which, as a prebiotic with confirmed health-promoting properties, has been increasingly used as a food additive. The present study aimed to determine the effect of roasting retrograded starch with the addition of anhydrous glucose at different temperatures (110, 130 or 150 °C) and different times (5 or 24 h) on the modified starch's properties. The results of high-performance size-exclusion chromatography coupled with refractive index detector (HPSEC/RI) analysis and the changes observed in the solubility of starch roasted with glucose in DMSO, as well as in its other properties, confirm the changes in its molecular structure, including thermolytic degradation and the ongoing polymerization of starch with added glucose.

An Attempt to Replace Pure Citric Acid with Natural Lemon Juice during Potato Starch Esterification.

The application of chemical operations in food processing, in which pure chemical compounds are used to modify food ingredients, often raises social concerns. One of the most frequently modified dietary substances is starch, e.g., E1401-E1404, E1412-E1414, E1420, E1422, E1440, E1442, and E1450-E1452. An alternative solution to chemical treatments seems to be the use of raw materials naturally containing substrates applied for starch modification. Heating starch with a lemon juice concentrate can be considered a novel and effective method for producing starch citrate, which is part of the so-called "green chemistry". The modified preparations obtained as a result of potato starch esterification with natural lemon juice had a comparable degree of esterification to that of the esters produced with pure citric acid. In addition, the use of the juice doubled their resistance to amylolytic enzymes compared to the preparations made with pure acid. Replacing citric acid with lemon juice can facilitate the esterification process, and the analyzed properties of both types of modified preparations indicate that starch esters produced with pure citric acid can be successfully replaced by those produced using natural lemon juice, which may increase the social acceptance of these modified preparations.

Quality- and Health-Promoting Compounds of Whole Wheat Bread with the Addition of Stale Bread, Cornmeal, and Apple Pomace.

The aim of this study was to evaluate the effect of extruded preparations on the bioactive and nutritional properties, vitamin B content, volatile compound profile, and quality of whole wheat bread. Extruded preparations based on stale bread (secondary raw materials) and apple pomace (byproducts) were used as bread additives. It was found that the preparations did not enrich the bread in protein but in health-promoting compounds, especially gallic acid, protocatechuic acid, caffeic acid, p-coumaric acid, rutin, quercetin, and B vitamins. Extruded preparations had a positive effect on the quality of the bread produced, such as yield and cohesiveness, and gave it a pleasant aroma. It was shown that among all the examined bread samples with added extruded preparations of stale bread, the cornmeal and apple pomace bread samples with 15% extruded preparation (containing 55% cornmeal, 30% stale bread, and 15% apple pomace) had sufficient nutritional value, the highest amounts of gallic acid, protocatechuic acid, p-coumaric acid, caffeic acid, rutin, and quercetin; medium amounts of ellagic acid; high antioxidant activity determined in vitro using four methods (by DPPH, ABTS, power (FRAP), and Fe(II) chelating assays); adequate quality; and significant amounts of vitamins, especially B1, B2, and B3. This type of extruded preparation should utilize apple pomace, which is a byproduct, and stale bread, which is a secondary waste. Such a combination is an excellent low-cost, easy, and prospective solution for the baking industry that could be applied to obtain bread with elevated nutritional value and enhanced health potential, as proven in this publication.

The interactions of model cationic drug with newly synthesized starch derivatives.

Background and purpose: The aim of the work was to compare the interactions of three newly synthesized non-toxic starch derivatives, with varied anionic and non-ionic functional groups with methylene blue (MB) as a model cationic drug, and selection of starch derivative with highest affinity to the MB. Experimental approach: The native potato starch (SN), modified via acetylation (SM1), esterification and crosslinking (SM2) and crosslinking (SM3), was evaluated in MB adsorption studies and assessed by FTIR, PXRD, and DSC. Key results: The adsorption of MB on SM2 and SM3 matched the BET isotherm model, which confirmed physisorption on the low-porous surface. In the case of SM1, adsorption took place via electrostatic attraction between the heterogeneous adsorbent surface and the adsorbate, as demonstrated by the Freundlich plot. The FTIR confirmed vibrations assigned to N=C stretching bonds at 1600 cm-1 in the case of MB adsorbed on the SN and SM2. The most intense PXRD peaks belonged to SN and the least to SM2. In the DSC study, the thermal stability via ΔT was assessed, with SM2 of lowest ΔT value (179.8 °C). Conclusion: SM2 presented the best adsorption capacity, followed by SM3 and the weakest SM1. The interactions were confirmed in the adsorption studies and may reflect applications of the modified starches as drug carriers. In the FTIR study, a probable interaction between the OH- groups of SM2 and N+ of MB was revealed. The most amorphous structure was shown for SM2, which was correlated with the lowest thermal stability provided by the DSC study.

Modified Potato Starch as a Potential Retardant for Prolonged Release of Lidocaine Hydrochloride from Methylcellulose Hydrophilic Gel.

The problem of drug delivery often concentrates on the prolongation of drug activity. Application of natural polymers which are biodegradable and inexpensive is in the interest of many researchers. The aim of this study was the application of newly synthesized starch derivatives as potential functional excipients proposed for hydrophilic gel with lidocaine hydrochloride (LH) to prolong drug release from the hydrogel matrix. In our study, we investigated the effect of starch modified with citric acid on the release kinetics of LH using UV-VIS and Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), as well as viscosity and pH measurements. We demonstrated the effectiveness of citric-acid-modified starch in prolonging the release of LH from methylcellulose gel.

Effect of Long-Term Potato Starch Retention with Citric Acid on Its Properties.

The present study aimed to determine changes in the properties of starch triggered by its long-lasting (1, 2, 4, 7, 10, or 14 days) retention with citric acid (5 g/100 g) at a temperature of 40 °C. The starch citrates obtained under laboratory conditions had a low degree of substitution, as confirmed via NMR and HPSEC analyses. The prolonging time of starch retention with citric acid at 40 °C contributed to its increased esterification degree (0.05-0.11 g/100 g), swelling power (30-38 g/g), and solubility in water (19-35%) as well as to decreased viscosity of the starch pastes. Starch heating with citric acid under the applied laboratory conditions did not affect the course of DSC thermal characteristics of starch pasting. The low-substituted starch citrates exhibited approximately 15% resistance to amylolysis.

Physicochemical Properties and Digestion Resistance of Acetylated Starch Obtained from Annealed Starch.

One of the examples of physical starch modifications is the retention of a starch suspension in water having a temperature slightly lower than the pasting temperature (annealing). The aim of this study was to investigate the effect of the annealing process performed at various temperatures as the first stage of starch modification. The annealed starch preparations were then esterified using acetic acid anhydride. Finally, the annealed and acetylated starch preparations were determined for their properties. The annealing of starch before acetylation triggered changes in the properties of the modified preparations. It contributed to a higher degree of starch substitution with acetic acid residues and to the increased swelling power of starch. Both these properties were also affected by the annealing temperature. The highest resistance to amylolysis was found in the case of the starch preparation annealed at 53.5 °C and acetylated. The double modification involving annealing and acetylation processes increased the onset and end pasting temperatures compared to the acetylation alone. Similar observations were made for the consistency coefficient and yield point.

Phosphorylation of Maize Starch Enhanced with High-Voltage Electrical Discharge (HVED) Instead of Thermal Treatment.

The aim of this research was to explore the use of a high-voltage electrical treatment (HVED) as a substitute for heating during the phosphorylation of maize starch. Starch was treated with HVED, phosphorylated with Na2HPO4 or Na5P3O10 with and without thermal treatment and phosphorylated in combination with HVED prior to and after the chemical modification. When starch was phosphorylated with Na2HPO4, HVED was more efficient in catalyzing reaction (3.89 mg P/kg for 30 min HVED in relation to 0.43 mg P/kg for thermal treatment), whereas with Na5P3O10 similar P content was achieved as with thermal treatment (0.76 P/kg for 30 min HVED in relation to 0.86 mg P/kg). The order of HVED and chemical reactions did not have a marked effect on phosphorous content. In combination with Na2HPO4, HVED pre-treatment had a more pronounced effect on the solubility and water absorption, whereas post-treatment was favoured with Na5P3O10. Mean diameter was increased by all treatments, where HVED had a marked effect. Enthalpy of gelatinization ranged from 11.76 J/g for starch treated with Na5P3O10 and 10 min-HVED to 13.58 J/g for Na5P3O10 treated sample. G' and G″ increased after both thermally and HVED enhanced phosphorylations, with a slightly more pronounced effect of the HVED.

Effect of Two Combined Functional Additives on Yoghurt Properties.

The aim of the research was the analysis of yoghurts enriched with blue honeysuckle berries dry polyphenolic extract and new preparation of resistant starch. The additives were introduced individually at concentration 0.1% (w/v) and in mixture at final concentration of 0.1 and 0.2% of both components. Yogurt microflora, pH, and its physicochemical and antioxidant properties were examined over 14 days of storage under refrigerated conditions. Studies showed that both substances can be successfully used in yoghurt production. Yoghurt microflora es. S. thermophilus and Lb. delbrueckii subsp. bulgaricus counts appeared to be higher in samples supplemented with these additives comparing to control yoghurt by 3-8%. More stimulating effect on their growth, especially on S. thermophilus, revealed resistant starch. Addition of this polysaccharide improved also the rheological properties of yogurts, which showed higher viscosity than samples produced without it. Addition of honeysuckle berries preparation significantly influenced the yogurts' color, giving them deep purple color, and their antioxidant potential. During storage, contents of anthocyanin and iridoid compounds were decreasing, but antioxidant activity in the products remained stable.

The Annealing of Acetylated Potato Starch with Various Substitution Degrees.

This study aimed to determine the effect of "annealing" acetylated potato starch with a homogenous granule size and various degrees of substitution on the thermal pasting characteristics (DSC), resistance to amylases, rheology of the prepared pastes, swelling power and dynamics of drug release. A fraction of large granules was separated from native starch with the sedimentation method and acetylated with various doses of acetic anhydride (6.5, 13.0 or 26.0 26 cm3/100 g starch). The starch acetates were then annealed at slightly lower temperatures than their pasting temperatures. The annealing process caused an almost twofold increase in the resistance to amylolysis and a threefold increase in the swelling power of the modified starch preparations. The heat of phase transition decreased almost two times and the range of starch pasting temperatures over two times, but the pasting temperature itself increased by ca. 10 °C. The 40 g/100 g addition of the modified starch preparation decreased the rate of drug release from a hydrogel by ca. one-fourth compared to the control sample.

The influence of the extrusion process on the nutritional composition, physical properties and storage stability of black chokeberry pomaces.

The study examined the influence of the process of extrusion on the physical properties and nutritional composition of black chokeberry pomaces. It has been determined that the extrusion process resulted in a reduction of the content of anthocyanins and fibre, but an increase of the contribution of simple sugars. In order to assess the phase transitions occurring in the products, a state diagram was utilized, which was constructed using the freezing and vitrification curve and values characterizing the conditions of maximum cryoconcentration. The determined values of critical water activity (based on water activity concepts) indicate that pomaces and extrudates retain crispiness in storage under moderate environmental relative humidity conditions. However, in the case of the glass transition concept, the determined values of water activity indicate that products stored in room temperature must be protected against the influence of humidity.

Properties of Potato Starch Roasted with Apple Distillery Wastewater.

This study aimed to produce starch esters by roasting potato starch with apple distillery wastewater at various temperatures and aimed to determine the effects of esterification conditions on selected properties of the modified preparations. Apple distillery wastewater was concentrated, mixed with starch (30 g of dry matter per 100 g of starch), dried, and roasted at temperatures of 110, 130 or 150 °C for 3 h. The resulting preparations were rinsed 30 times with a 60% ethanol solution, dried, and disintegrated. After that, the following analyses were performed: content of substituted acids (after alkaline de-esterification) with high performance liquid chromatography (HPLC); thermal characteristics with differential scanning calorimetry (DSC); swelling power and solubility in water at 80 °C; color changes with a colorimeter; rheology of the pastes based on the plotted flow curves; and the pastes' resistance to amyloglucosidase. Starch treatments with apple distillery wastewater at 130 and 150 °C caused significant changes to its properties when compared to the control samples of native starch and starch roasted without wastewater, including: a lower temperature and heat of pasting, lower swelling power and solubility in water, darker color, higher resistance to amyloglucosidase, and the formation of pastes with a lower viscosity.

Effect of the Esterification of Starch with a Mixture of Carboxylic Acids from Yarrowia lipolitica Fermentation Broth on Its Selected Properties.

Potato starch was esterified with carboxylic acids contained in the fermentation broth from Yarrowia lipolitica yeast production. Various acid concentrations and various roasting temperatures were used to determine effects of process conditions on ester properties, including the number of acid residues attached to starch chains, starch susceptibility to amylolysis, and thermal characteristics of starch phase transitions. Study results demonstrated the effect of both the composition and the dose of the fermentation broth and of roasting temperature of starch on the number of acid residues attached to starch chains. Citric acid was more susceptible to esterification with starch (DS = 5.65%) compared to the α-ketoglutaric acid (DS = 0.12%). In the case of the latter, a higher degree of substitution was determined in the esters produced at higher roasting temperatures. The lowest digestibility (RS = 20%) was demonstrated for the starch esters with the highest degree of substitution with citric acid, whereas all starch esters showed decreased values of the thermal characteristics of pasting.

Influence of Acetylated Annealed Starch on the Release of ß-Escin from the Anionic and Non-Ionic Hydrophilic Gels.

Naturally sourced products introduced to human nutrition and rediscovered for therapy include polysaccharides from potatoes. The starch may obtain unique properties via acetylation with acetic anhydride at 13 cm3/100 g of starch as the basic dose of reagent used in industrial conditions. The hydrogel formulation was applied as a carrier for escin included in the dry extract of Aesculus hippocastanum. Six hydrogels were evaluated (methylcellulose, polyacrylic acid-Carbopol 980 NF and polyacrylate crosspolymer 11-Aristoflex Velvet) with various concentrations of the modified starch. The kinetic studies of in vitro ß-escin release were carried out in purified water at 37 ± 0.5 °C using a paddle apparatus at 50 rpm and a time period of 7 h. The criterion for the most suitable model was based on a high correlation coefficient of evaluated release profiles. The addition of modified annealed acetylated potato starch resulted in prolongation of ß-escin release.

Effect of the Botanical Origin on Properties of RS3/4 Type Resistant Starch.

This study aimed to compare properties of retrograded starch acetates with an identical degree of substitution, but produced from raw materials of various botanical origin. Retrograded starch was produced from potato, wheat, corn, and tapioca starch, and afterwards acetylated with an acetic acid anhydride, adjusting reagent doses to achieve an identical degree of esterification of the modified preparation (2.1 g/100 g). Preparations of retrograded starch and acetylated retrograded starch differed significantly in their properties, which was due to the disparate botanical origin of starch. The highest susceptibility to acetylation was demonstrated for potato starch, and the lowest one for wheat starch. Acetylation of retrograded starch of various botanical origin increased its solubility in water, swelling power and viscosity of its pastes, as well as decreased its amylose content. Preparations of acetylated retrograded starches of disparate botanical origins may be deemed preparations of RS3/4 type resistant starch because they exhibit significant (23.5⁻34.0%) resistance to the activity of amylolytic enzymes.

Organic Acids of the Microbiological Post-Culture Medium as Substrates to be Used for Starch Modification.

This study aimed to identify the feasibility of producing highly-substituted starch esters via thermal modification of starch using a post-culture medium of Yarrowia lipolitica yeast. This manuscript describes a successful attempt at potato starch modification with a post-culture medium of Yarrowia lipolitica yeast with different concentrations of organic acids. Starch preparations produced by roasting (130 °C) and these produced by starch reaction with a synthetic acid mixture were compared in terms of the types and number of acid residues esterified with starch. The effectiveness of starch esterification was found to depend on medium composition and to be higher upon the use of a synthetic acid mixture. In addition, a higher reactivity with starch was demonstrated for citric acid than for α-ketoglutaric acid. The highly-substituted starch esters formed as a result of potato starch modification with post-culture medium were characterized by decreased values of thermal parameters of pasting characteristics, determined with a differential scanning calorimeter (DSC), and by compromised resistance to amylolysis. The intensity of these changes increased along with an increasing total percentage of starch ester substitution.

Effect of resistant starch RS4 added to the high-fat diets on selected biochemical parameters in Wistar rats.

BACKGROUND: Resistant starch (RS) is part of potato starch that is not digested in the gastrointestinal tract. RS4 is a chemically modified starch (for example by oxidation and esterification) and physically (by heating). OBJECTIVE: The study was aimed at determining the effect of resistant starch on lipid metabolism and activity of hepatic enzymes in Wistar strain rats fed high-fat diets containing 15% of lard or 15% of soybean oil. MATERIAL AND METHODS: Four types of diets were administered to the animals (4 groups of males, n = 32): control diet (K1) containing 15% of soybean oil; control diet (K2) containing 15% of lard as well as two groups receiving the same diets with 10% addition of resistant starch RS4 (K1S and K2S). RESULTS: The mean concentration of total cholesterol was lower in the group of animals fed a diet with vegetable oil (39.9 mg/dl) as compared to that reported in the group of rats fed the lard-supplemented diet (55.2 mg/dl). Compared to the control groups in both groups of animals receiving the diet supplemented with resistant starch RS4 the total cholesterol concentration in serum decreased by ca. 25% (differences were statistically significant). In groups of rats receiving oil- or lard-containing diets with the addition of the resistant starch preparation the concentration of triglycerides in serum decreased by ca. 47% and 10%, respectively. CONCLUSIONS: A beneficial effect of the resistant starch RS4 added to Wistar rats diets on the lipid metabolism has been shown. The concentrations of total cholesterol and triglycerides in the serum were lower and concentration of HDL-cholesterol was higher in the rats fed with the diets containing the addition of the RS4 preparation as compared to the control groups. Based on the activity of hepatic enzymes the degree of liver damage was lower in groups of rats fed with diets containing resistant starch RS4 as compared to the control groups.

Sodium salt of starch octenylsuccinate as an emulsifier in "light" type mayonnaises.

INTRODUCTION: The E 1450 sodium salt of starch octenylsuccinate which exhibits emulsifying properties is used as food additive and is also recommended as yolk replacer in the process of mayonnaise production. Commercial E 1450 preparations reveal excellent functional properties in mayonnaise production. However, sodium salt of starch octenylsuccinate produced in the course of the suspension process (as well as the product of its hydrolysis in a membrane reactor), despite high surface activity, is unsuitable for this purpose. Therefore, a hypothesis was put forward that the cause of the unsuitability of these preparations for mayonnaise production is their improper profile of molecular mass distribution and the objective of this study was to verify the above thesis. MATERIAL AND METHODS: E 1450 preparations of different degree of substitution obtained alternately by means of reactive extrusion or enzymatic hydrolysis preceded by esterification in suspension were investigated. Preparations were characterised physico-chemically by determining the degree of substitution, viscosity, emulsifying activity index (EAI) and their capability to stabilise model emulsions (ME). Their molecular mass distribution profiles were determined and their suitability for the manufacture of low-fat mayonnaises was assessed. These investigations were also carried out for mixtures of preparations obtained as a result of a reactive extrusion and hydrolysis of the ester obtained during the suspension process. RESULTS: Despite the fact that the preparations obtained in suspension were characterised by 100% values of the ES parameter, all attempts to manufacture with their assistance of mayonnaise by way of a simple substitution in the formulation of dried egg yolk by E 1450 starch failed. Similarly, attempts to manufacture mayonnaise using any of the preparations obtained by means of reactive extrusion or enzymatic hydrolysis of the reaction product in suspension also ended in failure. The only successful solution was the application of equilibrium mixtures of E 1450 preparations obtained by way of reactive extrusion with a hydrolisate. Table 2 collates texture parameters of the obtained mayonnaises. CONCLUSION: The performed investigations fully corroborated the correctness of the proposed hypothesis that the suitability of the starch octenylsuccinate sodium salt as an emulsifier for low-fat mayonnaises is associated with the appropriately high polydispersity of this polymer.