A new evaluation of the decay data for 166Ho.

The ß--emitter 166Ho is of interest as a potential radiolabel for therapeutic medical applications. A new decay data evaluation for 166Ho has been performed using the Decay Data Evaluation Project (DDEP) methodology. New recommended values for the half-life, γ-ray emission probabilities, ß-- branching ratios, and other relevant nuclear and atomic data are provided. This paper provides a summary of the evaluation; the complete set of recommended data tables and detailed evaluator comments are available at the DDEP website.

Absolute emission intensities of the gamma rays from the decay of 224Ra and 212Pb progenies and the half-life of the 212 Pb decay.

Absolute gamma-ray emission intensities for 36 characteristic gamma rays from the decay of 224Ra, 212Pb, and their progeny were determined by measuring sources calibrated for activity by means of primary methods based on well-defined high-purity germanium (HPGe) detectors at both NIST and NPL. Results from the two laboratories agree with recent data evaluations, except for gamma rays with low emission intensities. The decay schemes have been re-balanced based on the new results. In addition, the half-life for 212Pb was measured using several HPGe detectors, ionization chambers, and a well-type NaI(Tl) detector.

Determination of the internal pair production branching ratio of 90Y.

The National Institute of Standards and Technology (NIST) measured the internal pair production branching ratio of 90Y using two sources and four high purity germanium (HPGe) detectors to detect the resulting annihilation radiation. The internal pair production branching ratio determined from these measurements, (32.0 ±â€¯1.5) × 10-6 (k = 1), agrees within 1 standard uncertainty with the recommended value of (32.6 ±â€¯0.7) × 10-6 (k = 1) from the DDEP database.

Standardization of I-124 by three liquid scintillation-based methods.

A solution of 124I was standardized for activity by 4πß(LS)-γ(NaI) live-timed anticoincidence (LTAC) counting, with confirmatory measurements by triple-to-double coincidence ratio (TDCR) and CIEMAT-NIST efficiency tracing (CNET) liquid scintillation counting. The LTAC-based standard was shown to be in agreement (within k = 1 uncertainties) with previous measurements at NIST and elsewhere. Calibration settings for radionuclide calibrators were determined and a discrepancy with literature values, partially due to a calibration methodology dependent upon an erroneous setting for 18F, was identified and explained.

Standardization of 64Cu activity.

The complex decay scheme that makes 64Cu promising as both an imaging and therapeutic agent in medicine also makes the absolute measurement of its activity challenging. The National Institute of Standards and Technology (NIST) has completed a primary activity standardization of a 64CuCl2 solution using the 4πß(LS)-γ(NaI) live-timed anticoincidence (LTAC) counting method with a combined standard uncertainty of 0.51 %. Two liquid scintillation (LS) counting methods were employed for confirmatory measurements. Secondary measurements were made by high-purity germanium detectors, pressurized ionization chambers (IC), and a well-type NaI(Tl) counter. Agreement between the LTAC-based standard and standards from other laboratories was established via IC calibration factors. Poor agreement between methods and with theoretical IC responses may indicate a need for improved ß+/- branching probabilities and a better treatment of ß+/- spectra.

Decay data for the positron emission tomography imaging radionuclide 124I: A DDEP evaluation.

A new decay data evaluation for the positron emitting radionuclide 124I has been performed using the Decay Data Evaluation Project (DDEP) methodology. New recommended values for the half-life, γ-ray emission probabilities, ß+ branching ratios, and other relevant nuclear and atomic data are provided. This paper provides a summary of the evaluation; the complete set of recommended data tables and detailed evaluator comments are available at the DDEP website.

Assessing the absolute quantitative accuracy of Positron Emission Tomography for Cu-64 using traceable calibrated phantoms.

Using uniform cylindrical phantoms containing calibrated solutions of 18F and 64Cu, we evaluated for the first time the accuracy with which the activity concentration of 64Cu can be quantified on an absolute basis using Positron Emission Tomography (with X-ray Computed Tomography, PET-CT). The scanner was first calibrated for 18F using the manufacturer's calibration protocol and a phantom with an activity concentration value traceable to the U.S. National standard. By using a similarly calibrated 18F solution phantom, we were able to determine a correction factor that can be applied to the 64Cu imaging data that gave a result that is consistent with 100% recovery with a combined standard uncertainty of 2%. We also demonstrate how a calibrated, solid phantom containing 68Ge as a long-lived 18F surrogate can be used to monitor and transfer the correction factor to other studies.

Results of an international comparison of activity measurements of 68Ge.

An international key comparison, identifier CCRI(II)-K2.Ge-68, has been performed. The National Institute of Standards and Technology (NIST) served as the pilot laboratory, distributing aliquots of a 68Ge/68Ga solution. Results for the activity concentration, CA, of 68Ge at a reference date of 12h00 UTC 14 November 2014 were submitted by 17 laboratories, encompassing many variants of coincidence methods and liquid-scintillation counting methods. The first use of 4π(Cherenkov)ß-γ coincidence and anticoincidence methods in an international comparison is reported. One participant reported results by secondary methods only. Two results, both utilizing pure liquid-scintillation methods, were identified as outliers. Evaluation using the Power-Moderated Mean method results in a proposed Comparison Reference Value (CRV) of 621.7(11)kBqg-1, based on 14 results. The degrees of equivalence and their associated uncertainties are evaluated for each participant. Several participants submitted 3.6mL ampoules to the BIPM to link the comparison to the International Reference System (SIR) which may lead to the evaluation of a Key Comparison Reference Value and associated degrees of equivalence.

(Mis)use of (133)Ba as a calibration surrogate for (131)I in clinical activity calibrators.

Using NIST-calibrated solutions of (131)Ba and (131)I in the 5mL NIST ampoule geometry, measurements were made in three NIST-maintained Capintec activity calibrators and the NIST Vinten 671 ionization chamber to evaluate the suitability of using (133)Ba as a calibration surrogate for (131)I. For the Capintec calibrators, the (133)Ba response was a factor of about 300% higher than that of the same amount of (131)I. For the Vinten 671, the Ba-133 response was about 7% higher than that of (131)I. These results demonstrate that (133)Ba is a poor surrogate for (131)I. New calibration factors for these radionuclides in the ampoule geometry for the Vinten 671 and Capintec activity calibrators were also determined.

Long-term stability of carrier-added (68)Ge standardized solutions.

Tests for chemical stability were carried out on carrier-added (68)Ge solutions prepared and calibrated in 2007 and 2011 to evaluate the suitability of the specific composition as a potential Standard Reference Material. Massic count rates of the stored solutions were measured using a NaI(Tl) well counter before and after gravimetric transfers. The present activity concentration of the 2007 solution was also measured using live-timed anticoincidence counting (LTAC) and compared to the 2007 calibrated value. The well counter data indicated no change in massic count rate to within uncertainties for either solution. The LTAC measurements gave a difference of -0.49% in the activity concentration 2007 solution over 7 years. However, the uncertainty in the decay correction over that time, due to the uncertainty in the (68)Ge half-life, accounted for the majority (0.67% out of 0.83%) of the standard uncertainty on the activity concentration. The results indicate that these carrier-added solutions are stable with regard to potential activity losses over several half-lives of (68)Ge.

Revision of the NIST Standard for (223)Ra: New Measurements and Review of 2008 Data.

After discovering a discrepancy in the transfer standard currently being disseminated by the National Institute of Standards and Technology (NIST), we have performed a new primary standardization of the alpha-emitter (223)Ra using Live-timed Anticoincidence Counting (LTAC) and the Triple-to-Double Coincidence Ratio Method (TDCR). Additional confirmatory measurements were made with the CIEMAT-NIST efficiency tracing method (CNET) of liquid scintillation counting, integral γ-ray counting using a NaI(Tl) well counter, and several High Purity Germanium (HPGe) detectors in an attempt to understand the origin of the discrepancy and to provide a correction. The results indicate that a -9.5 % difference exists between activity values obtained using the former transfer standard relative to the new primary standardization. During one of the experiments, a 2 % difference in activity was observed between dilutions of the (223)Ra master solution prepared using the composition used in the original standardization and those prepared using 1 mol·L(-1) HCl. This effect appeared to be dependent on the number of dilutions or the total dilution factor to the master solution, but the magnitude was not reproducible. A new calibration factor ("K-value") has been determined for the NIST Secondary Standard Ionization Chamber (IC "A"), thereby correcting the discrepancy between the primary and secondary standards.

A new NIST primary standardization of 18F.

A new primary standardization of (18)F by NIST is reported. The standard is based on live-timed beta-gamma anticoincidence counting with confirmatory measurements by three other methods: (i) liquid scintillation (LS) counting using CIEMAT/NIST (3)H efficiency tracing; (ii) triple-to-double coincidence ratio (TDCR) counting; and (iii) NaI integral counting and HPGe γ-ray spectrometry. The results are reported as calibration factors for NIST-maintained ionization chambers (including some "dose calibrators"). The LS-based methods reveal evidence for cocktail instability for one LS cocktail. Using an ionization chamber to link this work with previous NIST results, the new value differs from the previous reports by about 4%, but appears to be in good agreement with the key comparison reference value (KCRV) of 2005.

Development of a calibration methodology for large-volume, solid 68Ge phantoms for traceable measurements in positron emission tomography.

We have developed a methodology to calibrate the (68)Ge activity concentration in large (9L) cylindrical epoxy phantoms in a way that is traceable to national standards. The method was tested on two prototype cylindrical phantoms that are being used in a clinical trial and gave (68)Ge activity concentration values with combined standard uncertainties of about 1.1%. Imaging data from the phantoms using a calibrated PET-CT scanner gave values consistent with the calibrated activity concentrations within experimental uncertainties.

Current status and future needs for standards of radionuclides used in positron emission tomography.

Positron Emission Tomography (PET) is being increasingly used as a quantitative technique for detecting disease and monitoring patient progress during treatment. To ensure the validity of the quantitative information derived from the imaging data, it is imperative that all radioactivity measurements that are part of the imaging procedure be traceable to national or international standards. This paper reviews the current status of standards for positron emitting radionuclides (e.g., (18)F, (68)Ge/(68)Ga, and (124)I) and suggests needs for future work.

Calibration of Traceable Solid Mock (131)I Phantoms Used in an International SPECT Image Quantification Comparison.

The International Atomic Energy Agency (IAEA) has organized an international comparison to assess Single Photon Emission Computed Tomography (SPECT) image quantification capabilities in 12 countries. Iodine-131 was chosen as the radionuclide for the comparison because of its wide use around the world, but for logistical reasons solid (133)Ba sources were used as a long-lived surrogate for (131)I. For this study, we designed a set of solid cylindrical sources so that each site could have a set of phantoms (having nominal volumes of 2 mL, 4 mL, 6 mL, and 23 mL) with traceable activity calibrations so that the results could be properly compared. We also developed a technique using two different detection methods for individually calibrating the sources for (133)Ba activity based on a National standard. This methodology allows for the activity calibration of each (133)Ba source with a standard uncertainty on the activity of 1.4 % for the high-level 2-, 4-, and 6-mL sources and 1.7 % for the lower-level 23 mL cylinders. This level of uncertainty allows for these sources to be used for the intended comparison exercise, as well as in other SPECT image quantification studies.

Results of an international comparison for the activity measurement of 177Lu.

An international Key Comparison of (177)Lu has recently been carried out. Twelve laboratories performed assays for radioactivity content on aliquots of a common master solution of (177)Lu, leading to eleven results submitted for entry into the Key Comparison Database of the Mutual Recognition Arrangement. A proposed Comparison Reference Value (CRV) was calculated to be 3.288(4)MBq/g using all eleven results. Degrees of equivalence and their uncertainties were calculated for each laboratory based on the CRV. Most of the values reported by the participating laboratories were within 0.6% of the CRV.

A new primary standardization of 229Th.

The National Institute of Standards and Technology (NIST) has certified a high-purity (229)Th Standard Reference Material as SRM 4328C, based on live-timed 4pialphabeta-gamma anticoincidence counting (LTAC) of the equilibrium solution. The LTAC system was optimized to minimize the uncertainty in the result due to the two short-lived ground-states present in the decay chain. Confirmatory measurements were carried out by four other methods. Furthermore, the present absolute activity and measured gamma-ray emission rates were combined to obtain gamma-ray emission probabilities.

Investigation into the standardization of 99Tc.

The standardization of (99)Tc by several primary methods was investigated. This was performed to support a new (99)Tc transfer standard that has been developed and will be disseminated by the National Institute of Standards and Technology (NIST) as Standard Reference Material SRM 4288B. The standardization for the (99)Tc content of the solution was based on 4pibeta liquid scintillation (LS) measurements with (3)H-standard efficiency tracing (CIEMAT/NIST method). Confirmatory determinations were performed by 4pibeta(LS)-gamma(NaI) live-timed anti-coincidence (LTAC) counting and an LS-based 4pibeta triple-to-double coincidence ratio (TDCR) method.

Standardization of radium-223 by liquid scintillation counting.

Liquid scintillation (LS) counting was undertaken as part of the primary standardization of (223)Ra. Radium-223 decays with a half life of 11.43 d through a chain of shorter-lived daughter radionuclides, resulting in five alpha decays and three beta decays. The CIEMAT/NIST method of tritium efficiency tracing was employed, with the beta efficiencies being calculated using the program CN2004, developed by the Physikalisch-Technische Bundesanstalt (PTB). The total calculated LS efficiency, considering all daughter radionuclides, was approximately 598%. Separate experiments were performed to rule out loss of the 3.96 s (219)Ra daughter from the cocktail and possible counting loss of the 1.78 ms (215)Po daughter due to LS counter dead-time. No loss was observed in either experiment. In the final experiment an expanded uncertainty (k=2) of 0.55% was achieved. Results were in excellent agreement with confirmatory measurements performed by 2pialpha proportional counting. However, results are not in agreement with methods based on gamma ray measurements.

Results of an international comparison of 57Co.

As part of a Cooperative Research Project (CRP) aimed at improving the state of radioactivity measurement in nuclear medicine, the International Atomic Energy Agency (IAEA) organized a comparison of (57)Co solutions among the participants of the project. The comparison solutions were prepared from a single master stock solution and distributed to the participating laboratories, who measured the activity concentration of the solution using either the laboratory's radionuclide activity calibrator or primary standardization methods. A total of 9 sets of results were received, with 5 laboratories reporting results of primary measurements, one reporting results of secondary measurements calibrated against primary standards, and three laboratories reporting values based on measurements in commercial re-entrant ionization chambers using manufacturer-recommended calibration figures. Most of the laboratories reporting primary standardizations also provided results from secondary standardizations. The Comparison Reference Value was calculated from the mean of the five primary standardizations and was found to be 35.54 MBq g(-1), with a standard deviation of the mean of 0.17 MBq g(-1). Degrees of equivalence were calculated for each reporting laboratory and demonstrated that equivalence to within about 4% could be achieved, even in the case of those laboratories that used instruments calibrated by third parties.