Group 2 ITI Consensus Report: Technological developments in implant prosthetics.

OBJECTIVES: Group-2 reviewed the scientific evidence in the field of «Technology¼. Focused research questions were: (1) additive versus subtractive manufacturing of implant restorations; (2) survival, complications, and esthetics comparing prefabricated versus customized abutments; and (3) survival of posterior implant-supported multi-unit fixed dental prostheses. MATERIALS AND METHODS: Literature was systematically screened, and 67 publications could be critically reviewed following PRISMA guidelines, resulting in three systematic reviews. Consensus statements were presented to the plenary where after modification, those were accepted. RESULTS: Additively fabricated implant restorations of zirconia and polymers were investigated for marginal/internal adaptation and mechanical properties without clear results in favor of one technology or material. Titanium base abutments for screw-retained implant single crowns compared to customized abutments did not show significant differences concerning 1-year survival. PFM, veneered and monolithic zirconia implant-supported multi-unit posterior fixed dental prostheses demonstrated similar high 3-year survival rates, whereas veneered restorations exhibited the highest annual ceramic fracture and chipping rates. CONCLUSIONS: For interim tooth-colored implant single crowns both additive and subtractive manufacturing are viable techniques. The clinical performance of additively produced restorations remains to be investigated. Implant single crowns on titanium base abutments show similar clinical performance compared to other type of abutments; however, long-term clinical data from RCTs are needed. The abutment selection should be considered already during the planning phase. Digital planning facilitates 3D visualization of the prosthetic design including abutment selection. In the posterior area, monolithic zirconia is recommended as the material of choice for multi-unit implant restorations to reduce technical complications.

Disruptive Innovation in Dentistry: What It Is and What Could Be Next.

Dentistry is a technically oriented profession, and the health care sector is significantly influenced by the ubiquitous trend of digitalization. Some of these digital developments have the potential to result in disruptive changes for dental practice, while others may turn out to be just a pipedream. This Discovery! essay focuses on innovations built on artificial intelligence (AI) as the center-technology influencing 1) dental eHealth data management, 2) clinical and technical health care applications, and 3) services and operations. AI systems enable personalized dental medicine workflows by analyzing all eHealth data gathered from an individual patient. Besides dental-specific data, this also includes genomic, proteomic, and metabolomic information and therefore facilitates optimized and personalized treatment strategies and risk management. Based on the power of AI, the triangular frame of "data"/"health care"/"service" is supplemented by technological advancements in the field of social media, Internet of things, augmented and virtual reality, rapid prototyping, and intraoral optical scanning as well as teledentistry. Innovation continues to be critical to tackle dental problems until its routine implementation based on sound scientific evidence. Novel technologies must be viewed critically in relation to the cost-benefit ratio and the ethical implications of a misleading diagnosis or treatment produced by AI algorithms. Highly sensitive eHealth data must be handled responsibly to enable the immense benefits of these technologies to be realized for society. The focus on patient-centered research and the development of personalized dental medicine have the potential to improve individual and public health, as well as clarify the interconnectivity of disease in a more cost-effective way.

Influence of Material and Surface Roughness of Resin Composite Cements on Fibroblast Behavior.

CLINICAL RELEVANCE: A well-polished cement surface increases the viability and spreading of gingival fibroblasts. The tested resin composite cements did not reveal any cytotoxic effects. SUMMARY: Objective: This in vitro study aimed to investigate the effect of cement type and roughness on the viability and cell morphology of human gingival fibroblasts (HGF-1).Methods and Materials: Discs of three adhesive (Panavia V5 [PV5], Multilink Automix [MLA], RelyX Ultimate [RUL] and three self-adhesive (Panavia SA plus [PSA], SpeedCem plus [SCP], RelyX Unicem [RUN]) resin composite cements were prepared with three different roughnesses using silica paper grit P180, P400, or P2500. The cement specimens were characterized by surface roughness and energy-dispersive X-ray spectroscopic mapping. A viability assay was performed after 24 hours of incubation of HGF-1 cells on cement specimens. Cell morphology was examined with scanning electron microscopy.Results: The roughness of the specimens did not differ significantly among the different resin composite cements. Mean Ra values for the three surface treatments were 1.62 ± 0.34 µm for P180, 0.79 ± 0.20 µm for P400, and 0.17 ± 0.08 µm for P2500. HGF-1 viability was significantly influenced by the cement material and the specimens' roughness, with the highest viability for PSA ≥ RUN = MLA ≥ SCP = PV5 > RUL (p<0.05) and for P2500 = P400 > P180 (p<0.001). Cell morphology did not vary among the materials but was affected by the surface roughness.Conclusion: The composition of resin composite cements significantly affects the cell viability of HGF-1. Smooth resin composite cement surfaces with an Ra of 0.2-0.8 µm accelerate flat cell spreading and formation of filopodia.

Precision of maxillo-mandibular registration with intraoral scanners in vitro.

PURPOSE: To compare the precision of maxillo-mandibular registration and resulting full arch occlusion produced by three intraoral scanners in vitro. METHODS: Six dental models (groups A-F) were scanned five times with intraoral scanners (CEREC, TRIOS, PLANMECA), producing both full arch and two buccal maxillo-mandibular scans. Total surface area of contact points (defined as regions within 0.1mm and all mesh penetrations) was measured, and the distances between four pairs of key points were compared, each two in the posterior and anterior. RESULTS: Total surface area of contact points varied significantly among scanners across all groups. CEREC produced the smallest contact surface areas (5.7-25.3mm2), while PLANMECA tended to produce the largest areas in each group (22.2-60.2mm2). Precision of scanners, as measured by the 95% CI range, varied from 0.1-0.9mm for posterior key points. For anterior key points the 95% CI range was smaller, particularly when multiple posterior teeth were still present (0.04-0.42mm). With progressive loss of posterior units (groups D-F), differences in the anterior occlusion among scanners became significant in five out of six groups (D-F left canines and D, F right canines, p<0.05). CONCLUSIONS: Maxillo-mandibular registrations from three intraoral scanners created significantly different surface areas of occlusal contact. Posterior occlusions revealed lower precision for all scanners than anterior. CEREC tended towards incorrect posterior open bites, whilst TRIOS was most consistent in reproducing occluding units.

Augmented and virtual reality in dental medicine: A systematic review.

BACKGROUND: The aim of this systematic review was to provide an update on the contemporary knowledge and scientific development of augmented reality (AR) and virtual reality (VR) in dental medicine, and to identify future research needs to accomplish its clinical translation. METHOD: A modified PICO-strategy was performed using an electronic (MEDLINE, EMBASE, CENTRAL) plus manual search up to 12/2018 exploring AR/VR in dentistry in the last 5 years. Inclusion criteria were limited to human studies focusing on the clinical application of AR/VR and associated field of interest in dental medicine. RESULTS: The systematic search identified 315 titles, whereas 87 abstracts and successively 32 full-texts were selected for review, resulting in 16 studies for final inclusion. AR/VR-technologies were predominantly used for educational motor skill training (n = 9 studies), clinical testing of maxillofacial surgical protocols (n = 5), investigation of human anatomy (n = 1), and the treatment of patients with dental phobia (n = 1). Due to the heterogeneity of the included studies, meta-analyses could not be performed. CONCLUSIONS: The overall number of includable studies was low; and scientifically proven recommendations for clinical protocols could not be given at this time. However, AR/VR-applications are of increasing interest and importance in dental under- and postgraduate education offering interactive learning concepts with 24/7-access and objective evaluation. In maxillofacial surgery, AR/VR-technology is a promising tool for complex procedures and can help to deliver predictable and safe therapy outcomes. Future research should focus on establishing technological standards with high data quality and developing approved applications for dental AR/VR-devices for clinical routine.

Performance of Monolithic and Veneered Zirconia Crowns After Endodontic Treatment and Different Repair Strategies.

OBJECTIVES: To investigate failure loads of monolithic and veneered all-ceramic crowns after root canal treatment and to analyze marginal integrity of repair fillings. METHODS AND MATERIALS: Seventy-two human molars were restored with monolithic (Zr-All) or veneered (Zr-Ven) zirconia crowns. Molars were assigned to six groups (n=12 per group) depending on restoration material, access type (no access cavity [control] or endodontic treatment [test]), and type of filling (one-step [1-st] or two-step [2-st]). For type of filling, molars were treated using a self-etch universal adhesive and cavities were either filled with layered composite (1-st) or filled until the crown material was reached, which was additionally conditioned and then filled (2-st). Scanning electron microscopic analysis of the restoration margins was performed before and after thermomechanical loading (TML), and the percentage of continuous margins was assessed. Crowns were then loaded to failure. RESULTS: Preparation of the access cavity required more time in monolithic (445 s) than in veneered crowns (342 s). Loads to failure were higher in control groups (Zr-All: 5814 N; Zr-Ven: 2133 N) and higher in monolithic test (2985 N) than in veneered test crowns (889 N). In monolithic crowns, 1-st had lower fracture loads than 2-st fillings (2149 N vs 3821 N). Continuous margins of 66% to 71% were achieved, which deteriorated after TML by 39% to 40% in Zr-All, by 34% in Zr-Ven-1-st, and by 24% in Zr-Ven-2-st. CONCLUSIONS: Endodontic access and adhesive restorations resulted in reduced fracture load in monolithic and veneered zirconia crowns. Two-step fillings provided higher fracture loads in Zr-All and better marginal quality in Zr-Ven crowns.

Strain-specific antiviral activity of iminosugars against human influenza A viruses.

OBJECTIVES: Drugs that target host cell processes can be employed to complement drugs that specifically target viruses, and iminosugar compounds that inhibit host α-glucosidases have been reported to show antiviral activity against multiple viruses. Here the effect and mechanism of two iminosugar α-glucosidase inhibitors, N-butyl-deoxynojirimycin (NB-DNJ) and N-nonyl-deoxynojirimycin (NN-DNJ), on human influenza A viruses was examined. METHODS: The viruses examined were a recently circulating seasonal influenza A(H3N2) virus strain A/Brisbane/10/2007, an older H3N2 strain A/Udorn/307/72, and A/Lviv/N6/2009, a strain representative of the currently circulating pandemic influenza A(H1N1)pdm09 virus. RESULTS: The inhibitors had the strongest effect on Brisbane/10 and NN-DNJ was more potent than NB-DNJ. Both compounds showed antiviral activity in cell culture against three human influenza A viruses in a strain-specific manner. Consistent with its action as an α-glucosidase inhibitor, NN-DNJ treatment resulted in an altered glycan processing of influenza haemagglutinin (HA) and neuraminidase (NA), confirmed by MS. NN-DNJ treatment was found to reduce the cell surface expression of the H3 subtype HA. The level of sialidase activity of NA was reduced in infected cells, but the addition of exogenous sialidase to the cells did not complement the NN-DNJ-mediated inhibition of virus replication. Using reassortant viruses, the drug susceptibility profile was determined to correlate with the origin of the HA. CONCLUSIONS: NN-DNJ inhibits influenza A virus replication in a strain-specific manner that is dependent on the HA.

Dental care providers' decision making regarding maintenance of compromised teeth and implant therapy indication: an analysis of gender and enrollment in teaching positions.

OBJECTIVES: The aim of this study was to evaluate Brazilian dentists' decision making regarding periodontally involved teeth and implant therapy indications as well as possible modifying factors such as gender, enrollment in teaching positions, and area of specialization. MATERIAL AND METHODS: This cross-sectional questionnaire-based study was conducted among Brazilian dentists between June and November 2012. The questionnaire comprised 27 questions divided into four different sections: socio-demographic characteristics, questions about their clinical practice toward implant therapy, decision making in four clinical cases, and agreement with different statements regarding endodontic, periodontal, and implant therapy. RESULTS: A total of 155 dentists answered the questionnaire with an average age of 35.5 years. Fifty-one percent were male, and 44.5% were involved in teaching positions. One hundred and thirty-six (87.7%) respondents had already pursued a post-graduation program or were currently involved in one. 33.5% placed dental implants, 42% provided implant maintenance care to their patients, while 30% performed treatment of peri-implant diseases themselves. Dental faculty and dentists who had not followed any further training program, preferred the use of regenerative therapies more frequently. As opposed, dentists not involved in teaching positions, and periodontists were more prone to select resective therapies. CONCLUSION: Results suggest that dentists' decision making did not follow the latest external evidence, which might be related to factors as professional expertise and patients' preferences. Considering the difficulties faced by professionals when handling complex cases, there is an urgent need to establish international protocols and guidelines to help the clinician identify this particular treatment option, which corresponds with their internal evidence and is based on good external evidence.

Cost-effectiveness of anterior implants versus fixed dental prostheses.

For the restoration of an anterior missing tooth, implant-supported single crowns (ISCs) or fixed dental prostheses (FDPs) are indicated, but it is not clear which type of restoration is more cost-effective. A self-selected trial was performed with 15 patients with ISCs and 11 with FDPs. Patient preferences were recorded with visual analog scales before treatment, 1 month following restoration, and then annually. Quality-adjusted tooth years (QATYs) were estimated by considering the type of reconstruction for replacing the missing tooth and its effect on the adjacent teeth. A stochastic cost-effectiveness model was developed using Monte Carlo simulation. The expected costs and QATYs were summarized in cost-effectiveness acceptability curves. ISC was the dominant strategy, with a QATY increase of 0.01 over 3 years and 0.04 over 10 years with a higher probability of being cost-effective. While both treatment options provided satisfactory long-term results from the patient's perspective, the lower initial costs, particularly laboratory fees, were responsible for the dominance of ISCs over FDPs.

Differential effect of p7 inhibitors on hepatitis C virus cell-to-cell transmission.

Inhibitors targeting the hepatitis C virus (HCV) encoded viroporin, p7 prevent virus release in vitro. HCV can transmit by cell-free particle infection of new target cells and via cell-to-cell dependent contact with limited exposure to the extracellular environment. The role of assembly inhibitors in preventing HCV transmission via these pathways has not been studied. We compared the efficacy of three published p7 inhibitors to inhibit cell-free and cell-to-cell transmission of two chimeric HCV strains encoding genotype 2 (GT2) or 5 (GT5) p7 using a recently developed single cycle co-culture assay. The inhibitors reduced the infectivity of extracellular GT2 and GT5 virus by 80-90% and GT2 virus cell-to-cell transmission by 50%. However, all of the p7 inhibitors had minimal effect on GT5 cell contact dependent transmission. Screening a wider panel of diverse viral genotypes demonstrated that p7 viroporin inhibitors were significantly more effective at blocking cell-free virus than cell-to-cell transmission. These results suggest an altered assembly or trafficking of cell-to-cell transmitted compared to secreted virus. These observations have important implications for the validation, therapeutic design and testing of HCV assembly inhibitors.

Longitudinal assessment of hematopoietic stem cell transplantation and hyposalivation.

Hyposalivation is a common adverse effect of anti-neoplastic therapy of head and neck cancer, causing impaired quality of life and predisposition to oral infections. However, data on the effects of hematopoietic stem cell transplantation (HSCT) on salivary secretion are scarce. The present study determined stimulated whole-saliva flow rates in HSCT recipients in comparison with a healthy control group. Stimulated whole-saliva flow rates of 228 allogeneic HSCT recipients (134 males, 94 females; mean age, 43 yrs) were examined pre-HSCT and 6, 12, and 24 months post-HSCT. Healthy individuals (n = 144; 69 males, 75 females; mean age, 46 yrs) served as the control group. Stimulated saliva flow rates (mL/min) were measured and analyzed statistically, stratifying for hematological diagnoses and conditioning therapy. Hyposalivation (≤ 0.7 mL/min) was found in 40% (p < 0.00001), 53% (p < 0.00001), 31% (p < 0.01), and 26% (n.s.) of the recipients pre-HSCT, and 6, 12, and 24 months post-HSCT, respectively, whereas 16% of the control individuals had hyposalivation. Severe hyposalivation (≤ 0.3 mL/min) was found in 11%, 18%, 4%, and 4% of the recipients pre-HSCT, and 6, 12, and 24 months post-HSCT, respectively. Additionally, conditioning regimen and sex had an impact on saliva flow. In conclusion, hyposalivation was observed to be a common but generally reversible complication among HSCT recipients.

[Immediately loaded MonoType implants in the edentulous mandible]. / Sofort belastete MonoType-Implantate im zahnlosen Unterkiefer.

Results of immediately loaded implants are presented. 34 patients with 136 interforaminal MonoType implants (Straumann,Basel, Switzerland) were included in the study. The bar retention was manufactured fter the operation, inserted and covered with a hybrid prosthesis. 28 patients showed up for the follow-up study, the average time range was three years. Five implants were rated as failures, the cumulative six-year success rate being 94%. Interforaminal immediately loaded MonoType implants in edentulous patients showed very good results, comparable to similar studies with different systems.

Impact of adhesive surface and volume of luting resin on fracture resistance of root filled teeth.

AIM: To investigate the correlation between geometric parameters of severely compromised root filled (RCT) pre-molar teeth with irregular root canals and their fracture resistance. The null hypothesis tested was that the fracture resistance of root filled teeth is not influenced by: (i) the adhesive surface of the post-space preparation (A(PS) ), (ii) the coronal tooth surface (A(A) ), (iii) the amount of resin cement (V(C) ) and (iv) the Young's modulus of the specimens. METHODOLOGY: A total of 48 noncarious human pre-molar teeth with irregular root canals were decoronated, root filled and adhesively restored with post-retained direct composite crowns. After thermomechanical loading (1,200,000×, 5-50° C), static load was applied until failure. The geometric parameters of the tooth were evaluated by microcomputed tomography (µCT) using impressions taken after post-space preparation. Linear regression analyses were performed to correlate the geometric parameters of the specimens with their fracture resistance. RESULTS: The amount of resin cement (V(C) ) comprised up to 88% of the entire post-space (mean 67%) and had no impact on the maximal load (P = 0.88). The latter was significantly influenced by post-space preparation (P = 0.003). CONCLUSIONS: Amongst the geometric parameters tested, the surface area in the root canal had the greatest impact on fracture resistance of root filled pre-molars restored with posts and composite crowns, whilst the fit of the post was less important.

Testing temperature-induced proteomic changes in the plant-associated bacterium Pseudomonas fluorescens SBW25.

Traits used by bacteria to enhance ecological performance in natural environments are not well understood. Recognizing that the saprophytic plant-colonizing bacterium Pseudomonas fluorescens SBW25 experiences temperatures in its natural environment significantly cooler than the 28°C routinely used in the laboratory, we identified proteins differentially expressed between 28°C and the more environmentally relevant temperature of 14°C. Of 2102 protein isoforms, 32 were temperature responsive and identified by mass spectrometry. Seven of these (OmpR, MucD, GuaD, OsmY and three of unknown function, Tee1, Tee2 and Tee3) were selected for genetic and ecological analyses. In each instance, changes in protein expression with temperature were mirrored by parallel transcriptional changes. The fitness contribution of the genes encoding each of the seven proteins was larger at 14°C than 28°C and included two cases of trade-offs (enhanced fitness at one temperature and reduced fitness at the other -mucD and tee2 deletions). The relationship between the fitness effects of genes in vitro and in vivo was variable, but two temperature-responsive genes -osmY and mucD- contribute substantially to the ability of P. fluorescens to colonize the plant environment.

Proteomic analysis of integrin alphaIIbbeta3 outside-in signaling reveals Src-kinase-independent phosphorylation of Dok-1 and Dok-3 leading to SHIP-1 interactions.

BACKGROUND AND OBJECTIVES: Outside-in integrin alphaIIbbeta3 signaling involves a series of tyrosine kinase reactions that culminate in platelet spreading on fibrinogen. The aim of this study was to identify novel tyrosine phosphorylated signaling proteins downstream of alphaIIbbeta3, and explore their role in platelet signaling. METHODS AND RESULTS: Utilizing proteomics to search for novel platelet proteins that contribute to outside-in signaling by the integrin alphaIIbbeta3, we identified 27 proteins, 17 of which were not previously shown to be part of a tyrosine phosphorylation-based signaling complex downstream of alphaIIbbeta3. The proteins identified include the novel immunoreceptors G6f and G6b-B, and two members of the Dok family of adapters, Dok-1 and Dok-3, which underwent increased tyrosine phosphorylation following platelet spreading on fibrinogen. Dok-3 was also inducibly phosphorylated in response to the GPVI-specific agonist collagen-related peptide (CRP) and the PAR-1 and -4 agonist thrombin, independently of the integrin alphaIIbbeta3. Tyrosine phosphorylation of Dok-1 and Dok-3 was primarily Src kinase-independent downstream of the integrin, whereas it was Src kinase-dependent downstream of GPVI. Moreover, both proteins inducibly interacted with Grb-2 and SHIP-1 in fibrinogen-spread platelets. CONCLUSIONS: This study provides new insights into the molecular mechanism regulating alphaIIbbeta3-mediated platelet spreading on fibrinogen. The novel platelet adapter Dok-3 and the structurally related Dok-1 are tyrosine phosphorylated in an Src kinase-independent manner downstream of alphaIIbbeta3 in human platelets, leading to an interaction with Grb2 and SHIP-1.

Conservation of hydrophobicity within viral envelope glycoproteins reveals a putative hepatitis C virus fusion peptide.

The mechanism(s) by which hepatitis C virus (HCV) enters and infects cells remains unknown. Identifying the HCV fusion peptide(s) and understanding the early stages of infection may provide new opportunities for improved antiviral therapy. The HCV envelope glycoprotein E2 is thought to be a class II fusion protein. Class II fusion proteins are exemplified by the E protein of the tick-borne encephalitis virus (TBEV) and the E1 protein of the Semliki Forest virus (SFV). Analysis of the hydrophobicity profiles of four HCV E2 envelope glycoproteins revealed a region with a conserved three-pronged pattern of hydrophobicity, termed the tridentate (TD) region. The primary sequence of the TD region is highly conserved in all 490 HCV strains currently reported. The known fusion peptide loops of TBEV and SFV share the characteristic TD region hydrophobicity profile and significant sequence conservation in the TD region was identified in the E and E1 glycoproteins of members of the Flaviviridae and Togaviridae families, respectively. The HCV TD region peptides have membranotropic activity; in molecular dynamics (MD) simulations, the HCV TD region peptides insert into in a biomimetic bilayer in a similar manner to the TBEV fusion peptide and the peptides induce effective mixing of lipid membranes in a liposome fusion assay. Together these results indicate that the highly conserved TD region of the HCV E2 protein is a fusion peptide candidate and may be an important factor in the class II fusion mechanism.

Endodontics or implants? A review of decisive criteria and guidelines for single tooth restorations and full arch reconstructions.

This review describes practical criteria and a systematic process to aid the treatment planning decision of whether to preserve teeth by root canal treatment (RCT) or extract and provide an implant. Recommendations presented are based on best available evidence from the literature and the expert views of specialists in endodontics and restorative dentistry, including dental implantology. A MEDLINE search was conducted using the terms 'root canal therapy', 'dental implants', 'decision making', 'treatment planning', 'outcome' and 'human', and supplemented by hand-searching. When evaluating the outcome of root canal treatment, an observation period of 4-5 years is required for complete healing of periapical lesions. Dental implants, however, present a de novo situation and a functional period of at least 5 years is often required before peri-implant diseases are established and detected. Good long-term success rates and greater flexibility in clinical management indicate that RCT or retreatment should be performed first in most instances unless the tooth is judged to be unrestorable. When deciding if a compromised tooth of questionable prognosis should be maintained or replaced by an implant, both local, site-specific and more general patient-related factors should be considered. Following systematic evaluation and consideration of the best treatment option in a particular case, a treatment recommendation may then be given in favour or against tooth retention. Whilst single risks are possibly accepted for single tooth restorations, teeth with questionable prognosis and multiple pre-treatment requirements are better not included as abutments in fixed dental prostheses to reduce the risk to survival of the entire restoration.

B-1a cells and plasma cells in periodontitis lesions.

BACKGROUND AND OBJECTIVE: Host response mechanisms in periodontal tissues are complex and involve numerous systems of interactions between cells. The B-cell lineage seems to predominate in chronic periodontitis lesions. The aim of the present investigation was to study the correlation between inflammatory cells and some functional markers in gingival lesions obtained from subjects with severe chronic periodontitis. MATERIAL AND METHODS: Thirty-eight Caucasian subjects volunteered to take part in the study. A gingival biopsy from one randomly selected diseased proximal site (probing pocket depth > 6 mm and bleeding on probing positive) was obtained from each patient. Immunohistochemical preparation was used to identify inflammatory cells and functional markers. Correlations between the different percentages of cell markers were analyzed by pairwise correlation. RESULTS: B cells (B-1a and B-2 cells) occurred in larger proportions than T cells and plasma cells. A statistically significant correlation was found between the percentage of B-1a cells and plasma cells and between all B lymphocytes and plasma cells. About 60% of B lymphocytes exhibited autoreactive features. CONCLUSION: It is suggested that B-1a cells constitute a significant part of the host response in periodontitis lesions and that plasma cells may develop from both B-2 and B-1a cells.

Influence of post fit and post length on fracture resistance.

AIM: To investigate (i) the impact of post fit (form-congruence) and (ii) the influence of post length on the fracture resistance of severely damaged root filled extracted teeth. METHODOLOGY: Ninety-six single-rooted human teeth were root filled and divided into four groups (n = 24 per group). Post spaces were prepared with a depth of 6 mm (group 1, 3) and 3 mm (group 2, 4). Form-congruence with a maximal fit of the post within the root canal space was obtained in groups 1 and 2, whereas there was no form-congruence in groups 3 and 4. In all groups, glass fibre reinforced composite (FRC) posts were adhesively cemented and direct composite crown build-ups were fabricated without a ferrule. After thermo-mechanical loading (1200000x, 5-50 degrees C), static load was applied until failure. Loads-to-failure [in N] were compared amongst the groups. RESULTS: Post fit did not have a significant influence on fracture resistance, irrespective of the post length. Both groups with post insertion depths of 6 mm resulted in significantly higher mean failure loads (group 1, 394 N; group 3, 408 N) than the groups with post space preparation of 3 mm (group 2, 275 N; group 4, 237 N). CONCLUSIONS: Within the limitations of this study, the fracture resistance of teeth restored with FRC posts and direct resin composite crowns without ferrules was not influenced by post fit within the root canal. These results imply that excessive post space preparation aimed at producing an optimal circumferential post fit is not required to improve fracture resistance of roots.

Patient assessment and diagnosis in implant treatment.

As in any dental treatment procedure, a thorough patient assessment is a prerequisite for adequate treatment planning including dental implants. The literature was searched for references to patient assessment in implant treatment up to September 2007 in Medline via PubMed and an additional handsearch was performed. Patient assessment included the following aspects: (1) evaluation of patient's history, his/her complaints, desires and preferences; (2) extra-and intra-oral examination with periodontal and restorative status of the remaining dentition; (3) obligatory prerequisites were a panoramic radiograph and periapical radiographs (at least from the adjacent teeth) for diagnosis and treatment planning. Additional tomographs are required depending on the anatomic situation and the complexity of the planned restoration; (4) study casts are needed especially in more complex situations also requiring a diagnostic set-up, which can be tried-in and transferred into a provisional restoration as well as into a radiographic and surgical template. The current review clearly revealed the necessity for a thorough, structured patient assessment. Following an evaluation, a recommendation is given for implant therapy or, if not indicated, conventional treatment alternatives can be presented.