Triflic Acid-Assisted Regioselective Bromination of Quinoxaline Derivatives Enables a Facile Synthesis of Polymer PTQ10.

Poly[(thiophene)-alt-(6,7-difluoro-2(2-hexyldecyloxy)quinoxaline)] (PTQ10) emerges as a promising candidate for donor materials in organic solar cells (OSCs) due to its high efficiency, simplified synthesis, and cost-effectiveness. The acceptor unit of PTQ10 is derived from the alkylation of 5,8-dibromo-6,7-difluoroquinoxaline-2-ol, emphasizing the importance of its economical synthesis for commercial viability. This study investigates triflic acid-assisted regioselective bromination of quinoxaline derivatives and proposes an alternative synthetic pathway for PTQ10. The developed route benefits from concise synthetic steps, a dependable procedure, and high overall yield. Starting with the condensation of 4,5-difluorobenzene-1,2-diamine with ethyl oxoacetate to yield 6,7-difluoroquinoxaline-2-ol, subsequent triflic acid-assisted regioselective bromination produces 5,8-dibromo-6,7-difluoroquinoxaline-2-ol in high yield. Alkylation under Mitsunobu reaction conditions yields 5,8-dibromo-6,7-difluoro-2-(2-hexyldecyloxy)quinoxaline, followed by polymerization with 2,5-distannylated thiophene under Stille reaction conditions to afford PTQ10. This research provides insights into efficient synthetic strategies for PTQ10, advancing its potential for commercial application in OSCs.

Facile Synthesis of Dithienobenzothiadiazoles and D18-Cl Polymer via Na2S-Mediated Rapid Thiophene-Annulations for Organic Solar Cells.

We present a novel synthetic route for the rapid construction of dithieno[3',2':3,4;2'',3'':5,6]benzo[1,2-c][1,2,5]thiadiazoles via Na2S-promoted thiophene annulation. This method facilitated the synthesis of D18-Cl polymer, known for its efficacy as a polymer donor in bulk-heterojunction polymer solar cells. Starting from commercially available 4,7-dihalo-5,6-difluorobenzo[c][1,2,5]thiadiazole, various 4,7-dialkynylated compounds were obtained through Sonogashira reaction conditions. Subsequent Na2S-promoted thiophene annulations yielded DTBT and its derivatives in excellent yields within 10 minutes. DTBT was then utilized as a precursor for the concise synthesis of D18-Cl, benefiting from reduced synthetic steps, mild reaction conditions, decreased complexity, and high overall yields. In another route, a space group-bridged DTBT was directly constructed via Na2S-promoted thiophene annulations and converted into D18-Cl through a couple of steps. This developed protocol offers a straightforward and reliable synthetic tool, conducive to reducing complexities in the production of DTBT-based organic electronic materials, thereby advancing the potential commercialization of organic solar cells.

Efficient synthesis of dithienogermole (DTG) derivatives via olefin cross-metathesis.

4,4'-Bis-(4-pentenyl)-dithieno[3,2-b:2',3'-d]germole was synthesized as a functional building block for the efficient preparation of dithienogermole (DTG) derivatives with varying alkyl chain lengths and pendant functionalities in excellent yields. These derivatives were efficiently isolated via olefin cross-metathesis followed by hydrogenation.

TiO2-grafted multi-walled carbon nanotubes for dye-sensitized solar cells.

Dye-Sensitized Solar Cells (DSSCs) comprised of TiO2 porous films with multi-walled carbon nanotubes (MWNT) were prepared at low temperature (150 degrees C). MWNT were incorporated to facilitate the fast electron transport resulting from metallic properties of carbon nanotubes. In order to enhance the effect of MWNT incorporation, TiO2-grafted MWNT (TiO2-MWNT) was synthesized which can increase the electron transport rate further due to proximity of TiO2 to MWNT The presence of TiO2 nanoparticles on the surface of MWNT was confirmed by electron microscopy and energy dispersive X-ray spectroscopy. As in the DSSCs prepared through high temperature sintering of photoanodes, the maximum content of MWNT incorporated into TiO2 was limited to 0.01 wt% relative to TiO2. TiO2 photoanodes including TiO2-grafted MWNT (TiO2-MWNT/P25) enhanced the cell efficiencies by ca. 28% and 14%, relative to TiO2 photoanodes without and with MWNT respectively, reaching the efficiency of 5.0%. Electrochemical impedance spectroscopy (EIS) was utilized to examine the effect of incorporation of TiO2 nanoparticles grafted to MWNT on the cell performance.

Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111).

The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450 K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600 K and the molecules were ultimately transformed to carbon clusters at 900 K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature.

Electrochemical synthesis and one step modification of PMProDot nanotubes and their enhanced electrochemical properties.

Poly (3,4-(2-methylene)propylenedioxythiophene) (PMProDot) nanotubes were synthesized within the pores of polycarbonate and were further modified with styrene and vinylcarbazole by a one step electrochemical method through the methylene functional group. The enhanced electrochemical and electrochromic properties of composite nanotubes were investigated using FTIR, UV/Vis absorbance spectroscopy, and AFM.

Donor-mediated band gap reduction in a homologous series of conjugated polymers.

A family of six donor-acceptor-donor monomers was synthesized using combinations of thiophene, 3,4-ethylenedioxythiophene and 3,4-ethylenedioxypyrrole as donor moieties, and cyanovinylene as the acceptor moiety, to understand the effects of modified donor ability on the optoelectronic and redox properties of the resulting electropolymerized materials. Spectroelectrochemistry, differential pulse voltammetry, and cyclic voltammetry results indicate band gaps ranging from 1.1 to 1.6 eV and suggest that these polymers can be both p-type and n-type doped at accessible potentials. In situ conductivity results indicate that the n-type conductivity magnitude is modest, and the conductivity profile indicates a redox conductivity mechanism as opposed to a delocalized electronic band mechanism as observed for p-type doping.

Stable Macrocyclic and Tethered Donor-Acceptor Systems. Intramolecular Bipyridinium and Tetrathiafulvalene Assemblies.

A series of compounds has been prepared in which a tetrathiafulvalene (TTF)-derived donor is covalently tethered or bridged to one or more bipyridinium (viologen) acceptors. The relative degree of charge transfer observed in this series is discussed as a function of structure. The greatest CT effect is seen in the cyclophanes 9a-c and 13.

Synthesis and Properties of Bis(2,5-dimethylpyrrolo[3,4-d])tetrathiafulvalenes, a Class of Annelated Tetrathiafulvalene Derivatives with Excellent Electron Donor Properties.

The synthesis of the first derivatives of bis(pyrrolo[3,4-d])tetrathiafulvalene has been studied in detail. Starting from the readily available 2,5-dimethylpyrrole (11) and N-phenyl-2,5-dimethylpyrrole, bis(2,5-dimethylpyrrolo[3,4-d])tetrathiafulvalene (8) and the N,N'-disubstituted derivatives 6, 7, 9, and 10 were prepared in good yields by practical procedures. In contrast to the other types of aromatic annelated tetrathiafulvalenes (TTFs), which have appreciably higher oxidation potentials than TTF, the redox behavior of the pyrrolo tetrathiafulvalenes (TTFs) is very close to that of TTF itself. The potential of pyrrolotetrathiafulvalenes as a new series of organic metal building blocks is shown by the two-probe conductivities of the tetracyanoquinodimethane (TCNQ) complexes of the N-phenyl compound 7 and the N-methyl compound 9, which give higher values than TTF-TCNQ under similar conditions.