RESUMO
Thermoelectric cooling devices utilizing Bi2Te3-based alloys have seen increased utilization in recent years. However, their thermoelectric performance remains inadequate within the operational temperature range (≤400 K), with limited research addressing this issue. In this study, we successfully modulated the carrier concentration of the sample through Te content reduction, consequently lowering the peak temperature of the zT value from 400 to 300 K. This led to a substantial enhancement in thermoelectric performance at room temperature (≤400 K). Furthermore, by doping with La, the electrical transport properties have been further optimized, and the lattice thermal conductivity has been effectively reduced at the same time; the average zT value was ultimately elevated from 0.69 to 0.9 within the temperature range of 300-400 K. These findings hold significant promise for enhancing the efficacy of existing thermoelectric cooling devices based on Bi2Te3-based alloys.
RESUMO
The roof aquifer of the Carboniferous Taiyuan Formation coal beds in the Liulin area severely restricts the development and utilization of coalbed methane (CBM). A method for quantitatively predicting high-water-production areas was established by analyzing the relationship between the geophysical logging data and water production. The results showed that the logging profile of the limestone aquifers in high-water-production wells was unique, with high acoustic velocity (AC), high γ-ray values (GR), and low resistivity (Rd). The developed pores and fractures in the roof limestone increase the interval transit time. The formation water in the pores and fractures of the roof limestone decreases the resistivity. The clay filling in the pores and fractures of the roof limestone originated from the dissolution product of limestone and hydrodynamic transportation, which resulted in increased GR values. Furthermore, the representative natural GR log data were used to calculate the clay content in limestone, which indicated that the clay content in limestone had a positive correlation with the water yield of the CBM wells. The water-bearing characteristics of roof limestone showed that the water content was higher in the northern area and decreased gradually toward the south. The method for predicting the high-water-production area was helpful for the CBM exploration and production.
RESUMO
Unlike traditional shale gas reservoirs, where organic matter pores dominate, inorganic pores are the primary reservoir space in the Sinian (Ediacaran) high-maturity Doushantou dolomitic shale in western Hubei Province, China. The inorganic pore characteristics of Doushantuo shale and its influence on shale gas aggregation were investigated by examining the TOC content, thermal maturity, mineralogical composition, and field-emission scanning electron microscopy (SEM) and focused ion beam scanning electron microscopy (FIB-SEM) of drill cores. The results show that the shale mineral composition in the study area is primarily dolomite and plate-shaped interparticle-intercrystalline pores associated with dolomite are widespread inorganic pores in dolomitic shale. Interparticle-intercrystalline pores account for 75% of the total pores, with a pore size distribution mainly between 50 and 300 nm, as extracted from the 3D pore network model (PNM). Compared with organic pores, interparticle-intercrystalline pores provide greater space for gas storage and have a strong coupling relationship with the hydrocarbon generation and evolution of organic matter. Therefore, the inorganic pores in the Doushantuo Formation play a vital role in the enrichment and accumulation of shale gas. This study aims to establish a scientific basis for understanding the enrichment mechanism of shale gas in Doushantuo dolomitic shale and other inorganic pore-dominated shales in southern China.
RESUMO
The flexible thermoelectric (TE) generator has emerged as a superior alternative to traditional batteries for powering wearable electronic devices, as it can efficiently convert skin heat into electricity without any safety concerns. MXene, a highly researched two-dimensional material, is known for its exceptional flexibility, hydrophilicity, metallic conductivity, and processability, among other properties, making it a versatile material for a wide range of applications, including supercapacitors, electromagnetic shielding, and sensors. However, the low intrinsic Seebeck coefficient of MXene due to its metallic conducting nature poses a significant challenge to its TE application. Therefore, improving the Seebeck coefficient remains a primary concern. In this regard, a flexible MXene/organics/TiS2 misfit film was synthesized in this work through organic intercalation, exfoliation, and re-assembly techniques. The absolute value of Seebeck coefficient of the misfit film was significantly enhanced to 44.8 µV K-1, which is five times higher than that of the original MXene film. This enhancement is attributed primarily to the weighted effect of the Seebeck coefficient and possibly to energy-filtering effects at the heterogeneous interfaces. Additionally, the power factor of the misfit film was considerably improved to 77.2 µW m-1 K-2, which is 18 times higher than that of the original MXene film. The maximum output power of the TE device constructed of the misfit film was 95 nW at a temperature difference of 40 K, resulting in a power density of 1.18 W m-2, demonstrating the significant potential of this technology for driving low-energy consumption wearable electronics.
RESUMO
Since the outbreak of the novel coronavirus disease 2019 (COVID-19), the epidemic has gradually slowed down in various countries and people's lives have gradually returned to normal. To monitor the spread of the epidemic, studies discussing the design of related healthcare information systems have been increasing recently. However, these studies might not consider the aspect of user-centric design when developing healthcare information systems. This study examined these innovative technology applications and rapidly built prototype systems for smart healthcare through a systematic literature review and a study of patient innovation. The design guidelines for the Smart Healthcare System (SHS) were then compiled through an expert review process. This will provide a reference for future research and similar healthcare information system development.
RESUMO
Dislocations are commonly present and important in metals but their effects have not been fully recognized in oxide ceramics. The large strain energy raised by the rigid ionic/covalent bonding in oxide ceramics leads to dislocations with low density (â¼106 mm-2), thermodynamic instability and spatial inhomogeneity. In this paper, we report ultrahigh density (â¼109 mm-2) of edge dislocations that are uniformly distributed in oxide ceramics with large compositional complexity. We demonstrate the dislocations are progressively and thermodynamically stabilized with increasing complexity of the composition, in which the entropy gain can compensate the strain energy of dislocations. We also find cracks are deflected and bridged with â¼70% enhancement of fracture toughness in the pyrochlore ceramics with multiple valence cations, due to the interaction with enlarged strain field around the immobile dislocations. This research provides a controllable approach to establish ultra-dense dislocations in oxide ceramics, which may open up another dimension to tune their properties.
RESUMO
The past decades have witnessed surging demand for wearable electronics, for which thermoelectrics (TEs) are considered a promising self-charging technology, as they are capable of converting skin heat into electricity directly. Bi2Te3 is the most-used TE material at room temperature, due to a high zT of ~1. However, it is different to integrate Bi2Te3 for wearable TEs owing to its intrinsic rigidity. Bi2Te3 could be flexible when made thin enough, but this implies a small electrical and thermal load, thus severely restricting the power output. Herein, we developed a Bi2Te3/nickel foam (NiFoam) composite film through solvothermal deposition of Bi2Te3 nanoplates into porous NiFoam. Due to the mesh structure and ductility of Ni Foam, the film, with a thickness of 160 µm, exhibited a high figure of merit for flexibility, 0.016, connoting higher output. Moreover, the film also revealed a high tensile strength of 12.7 ± 0.04 MPa and a maximum elongation rate of 28.8%. In addition, due to the film's high electrical conductivity and enhanced Seebeck coefficient, an outstanding power factor of 850 µW m-1 K-2 was achieved, which is among the highest ever reported. A module fabricated with five such n-type legs integrated electrically in series and thermally in parallel showed an output power of 22.8 nW at a temperature gap of 30 K. This work offered a cost-effective avenue for making highly flexible TE films for power supply of wearable electronics by intercalating TE nanoplates into porous and meshed-structure materials.
RESUMO
BACKGROUND: Piperacillin antibody-induced immune hemolytic anemia is not rare in adults, and there have been reports of anti-HLA antibody-induced newborn platelet transfusion refractoriness. However, there has been no report of piperacillin-accompanied anti-HLA antibody-induced newborn pancytopenia. CASE REPORT: We herein present the case of a newborn with pancytopenia from a mother who carried anti-HLA-B55, anti-HLA-DR11, and piperacillin antibodies. The newborn HLA genotypes were HLA*B55:02 and HLA*DRB1*11:01. IgG antibodies can be transferred to the newborn via the placenta and induce the destruction of the platelet and white blood cells, which carry the corresponding antigens. Piperacillin antibodies coupling with newborn red blood cells (RBCs) led to the destruction of the RBCs and hemolytic anemia. RESULTS: The direct anti-globulin test was positive for RBCs in the newborn, and piperacillin antibodies were positive in both the newborn and his mother. Anti-HLA antibodies were positive in the maternal serum, whereas homologous antigens were positive in the newborn. The direct anti-globulin test of platelet was weekly positive in the newborn. CONCLUSION: Piperacillin and anti-HLA antibodies can pass through the placenta, induce incompatible blood cell destruction, and cause a series of clinical syndromes in newborns.
Assuntos
Anemia Hemolítica , Pancitopenia , Trombocitopenia , Adulto , Anemia Hemolítica/induzido quimicamente , Feminino , Antígenos HLA , Humanos , Imunoglobulina G , Recém-Nascido , Pancitopenia/complicações , Piperacilina/efeitos adversos , Gravidez , Trombocitopenia/complicaçõesRESUMO
Heavily acceptor-doped Cu2SnS3 (CTS) shows promisingly large power factor (PF) due to its rather high electrical conductivity (σ) which causes a modest ZT with a high electronic thermal conductivity (κe ). In the present work, a strategy of carrier compensation through Sb-doping at the Sn site in Cu2Sn0.8Co0.2S3 was investigated, aiming at tailoring electrical and phonon transport properties simultaneously. Rietveld analysis suggested a complex polymorphic microstructure in which the cation-(semi)ordered tetragonal phase becomes dominant over the coherently bonded cation-disordered cubic phase, as is preliminarily revealed using TEM observation, upon Sb-doping and Sb would substitute Sn preferentially in the tetragonal structure. With increasing content of Sb, the σ was lowered and the Seebeck coefficient (S) was enhanced effectively, which gave rise to high PFs maintained at ~10.4 µWcm-1K-2 at 773 K together with an optimal reduction in κe by 60-70% in the whole temperature range. The lattice thermal conductivity was effectively suppressed from 1.75 Wm-1K-1 to ~1.2 Wm-1K-1 at 323 K while maintained very low at 0.3-0.4 Wm-1K-1 at 773 K. As a result, a peak ZT of ~0.88 at 773 K has been achieved for Cu2Sn0.74Sb0.06Co0.2S3, which stands among the tops so far of the CTS-based diamond-like ternary sulfides. These findings demonstrate that polymorphic microstructures with cation-disordered interfaces as an approach to achieve effective phonon-blocking and low lattice thermal conductivity, of which further crystal chemistry, microstructural and electrical tailoring are possible by appropriate doping.
RESUMO
Dispersing two-dimensional (2D) graphene sheets in 3D material matrix becomes a promising route to access the exceptional mechanical and electrical properties of individual graphene sheets in bulk quantities for macroscopic applications. However, this is highly restricted by the uncontrolled distribution and orientation of the graphene sheets in 3D structures as well as the weak graphene-matrix bonding and poor load transfer. Here, we propose a previously unreported avenue to embed ordered 2D graphene array into ceramics matrix, where the catastrophic fracture failure mode of brittle ceramics was transformed into stable crack propagation behavior with 250 to 500% improvement in the mechanical toughness. An unprecedentedly low dry sliding friction coefficient of 0.06 in bulk ceramics was obtained mainly due to the inhibition of the microcrack propagation by the ordered 2D graphene array. These unique and low-cost 2D graphene array/ceramic composites may find applications in severe environments with superior structural and functional properties.
RESUMO
TaS2 nanolayers with reduced dimensionality show interesting physics, such as a gate-tunable phase transition and enhanced superconductivity, among others. Here, a solution-based strategy to fabricate a large-area foil of hybrid TaS2 /organic superlattice, where [TaS2 ] monolayers and organic molecules alternatively stack in atomic scale, is proposed. The [TaS2 ] layers are spatially isolated with remarkably weakened interlayer bonding, resulting in lattice vibration close to that of TaS2 monolayers. The foil also shows excellent mechanical flexibility together with a large electrical conductivity of 1.2 × 103 S cm-1 and an electromagnetic interference of 31 dB, among the highest values for solution-processed thin films of graphene and inorganic graphene analogs. The solution-based strategy reported herein can add a new dimension to manipulate the structure and properties of 2D materials and provide new opportunities for flexible nanoelectronic devices.
RESUMO
Perirenal adipose tissue (PrAT) is a visceral adipose tissue involved in the pathogenesis of obesity and cardiovascular diseases via neural pathways. However, the origins, morphological characterization, and resiniferatoxin (RTX)-susceptibility of sensory neurons that innervate rat PrAT are yet unclear. Using neural tracing, an injection of DiI (1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate) into PrAT revealed that sensory neurons that innervate PrAT reside in T9-L3 dorsal root ganglia (DRG). Peak labeling occurred in T13 and L1 DRGs. Two distinct peaks were observed in cross-sectional areas of the labeled soma, and the mean cross-sectional area was 717.1 ± 27.7 µm2. Immunofluorescence staining for transient receptor potential cation channel subfamily V member 1 (TRPV1) separated DiI-positive neurons into three subpopulations: small TRPV1-negative, small TRPV1-positive, and large TRPV1-negative. Furthermore, the injection of RTX into PrAT reduced labeled cells by 36.7% where TRPV1-positive cells were the main target of RTX denervation. These novel findings provide a structural basis for future TRPV1-dependent and TRPV1-independent studies on the sensory innervation of PrAT, which may be of interest for future therapeutic obesity treatment and intervention.
RESUMO
The cerebellum allows us to rapidly adjust motor behavior to the needs of the situation. It is commonly assumed that cerebellum-based motor learning is guided by the difference between the desired and the actual behavior, i.e., by error information. Not only immediate but also future behavior will benefit from an error because it induces lasting changes of parallel fiber synapses on Purkinje cells (PCs), whose output mediates the behavioral adjustments. Olivary climbing fibers, likewise connecting with PCs, are thought to transport information on instant errors needed for the synaptic modification yet not to contribute to error memory. Here, we report work on monkeys tested in a saccadic learning paradigm that challenges this concept. We demonstrate not only a clear complex spikes (CS) signature of the error at the time of its occurrence but also a reverberation of this signature much later, before a new manifestation of the behavior, suitable to improve it.
Assuntos
Potenciais de Ação/fisiologia , Cerebelo/fisiologia , Aprendizagem/fisiologia , Reconhecimento Visual de Modelos/fisiologia , Células de Purkinje/fisiologia , Movimentos Sacádicos/fisiologia , Animais , Axônios/fisiologia , Cerebelo/anatomia & histologia , Cerebelo/citologia , Eletrodos Implantados , Macaca mulatta , Masculino , Modelos Neurológicos , Desempenho Psicomotor/fisiologia , Células de Purkinje/citologia , Técnicas Estereotáxicas , Sinapses/fisiologiaRESUMO
We used an OTC (open top chamber) system to study the effects of elevated CO2 concentration (atmospheric CO2 concentration + 200 #x03BC;mol·mol-1) on the growth and photosynthetic physiology of Hylotelephium erythrostictum. Elevated CO2 concentration decreased the leaf stomatal density of the upper and lower epidermis of H. erythrostictum by 16.1% and 16.7%, respectively. Elevated CO2 concentration increased the vascular bundle in leaves and the cell volume near the upper epidermis. Elevated CO2 concentration significantly increased the photosynthetic pigments content, net photosynthetic rate, stomatal conductance and transpiration rate of H. erythrostictum at night. In the evening of initial flowering stage, elevated CO2 concentration significantly reduced the malic acid content by 64.0%, while increased cellulose content by 20.8%. In the morning of full flowering stage, elevated CO2 concentration significantly increased the malic acid content by 27.0%, but had no effect on carbohydrate content. Elevated CO2 concentration increased the number of branches per plant, stem mass and total biomass of H. erythrostictum. Elevated CO2 concentration was beneficial to the growth of H. erythrostictum.
Assuntos
Dióxido de Carbono , Nitrogênio , Fotossíntese , Biomassa , Folhas de PlantaRESUMO
OBJECTIVE: The aim of this study was to perform a comparative investigation of several different thawing protocols and to determine an appropriate protocol for thawing whole bovine frozen ovaries. STUDY DESIGN: Bovine ovaries were slowly frozen and then thawed by applying different protocols. Ultrastructural change, follicle viability, and the hormone levels of culture supernatant were measured. RESULTS: The percentage of morphologically normal primordial follicles and the hormone levels of culture supernatant in group D (two-step, thawing in water at 39°C) were significantly higher than those in any other group. Moreover, the ultrastructural alteration of oocyte in group D (two-step, thawing in water at 39°C) was slighter than those in any other group. CONCLUSIONS: The two-step protocol involving short-term exposure to water at a moderately high temperature (39°C) proved to be a suitable for thawing bovine whole ovaries.
Assuntos
Criopreservação/métodos , Ovário , Animais , Bovinos , Meios de Cultura/química , Estradiol/análise , FemininoRESUMO
In order to improve the technical level of the rapid detection of liquor fermented grains, in this paper, use near infrared spectroscopy technology to quantitative analysis moisture, starch, acidity and alcohol of liquor fermented grains. Using CARS, iPLS and no information variable elimination method (UVE), realize the characteristics of spectral band selection. And use the multiple scattering correction (MSC), derivative and standard normal variable transformation (SNV) pretreatment method to optimize the models. Establish models of quantitative analysis of fermented grains by PLS, and in order to select the best modeling method, using R2, RMSEP and optimal number of main factors to evaluate models. The results showed that the band selection is vital to optimize the model and CARS is the best optimization of the most significant effect. The calculation results showed that R2 of moisture, starch, acidity and alcohol were 0.885, 0.915, 0.951, 0.885 respectively and RMSEP of moisture, starch, acidity and alcohol were 0.630, 0.519, 0.228, 0.234 respectively. After optimization, the model prediction effect is good, the models can satisfy the requirement of the rapid detection of liquor fermented grains, which has certain reference value in the practical.
Assuntos
Álcoois/análise , Grão Comestível/química , Fermentação , Espectroscopia de Luz Próxima ao Infravermelho , Reatores Biológicos , Análise dos Mínimos Quadrados , Modelos TeóricosRESUMO
Similar to memory formation, memory extinction is also a new learning process that requires synaptic plasticity. Actin rearrangement is fundamental for synaptic plasticity, however, whether actin rearrangement in the infralimbic cortex (IL) plays a role in memory extinction, as well as the mechanisms underlying it, remains unclear. Here, using a conditioned taste aversion (CTA) paradigm, we demonstrated increased synaptic density and actin rearrangement in the IL during the extinction of CTA. Targeted infusion of an actin rearrangement inhibitor, cytochalasin D, into the IL impaired memory extinction and de novo synapse formation. Notably, we also found increased myosin II phosphorylation in the IL during the extinction of CTA. Microinfusion of a specific inhibitor of the myosin II ATPase, blebbistatin (Blebb), into the IL impaired memory extinction as well as the related actin rearrangement and changes in synaptic density. Moreover, the extinction deficit and the reduction of synaptic density induced by Blebb could be rescued by the actin polymerization stabilizer jasplakinolide (Jasp), suggesting that myosin II acts via actin filament polymerization to stabilize synaptic plasticity during the extinction of CTA. Taken together, we conclude that myosin II may regulate the plasticity of actin-related synaptic structure during memory extinction. Our studies provide a molecular mechanism for understanding the plasticity of actin rearrangement-associated synaptic structure during memory extinction.
Assuntos
Actinas/metabolismo , Aprendizagem da Esquiva/fisiologia , Extinção Psicológica/fisiologia , Miosina Tipo II/metabolismo , Plasticidade Neuronal , Córtex Pré-Frontal/fisiologia , Animais , Condicionamento Clássico/fisiologia , Masculino , Fosforilação , Córtex Pré-Frontal/ultraestrutura , Ratos Wistar , Sinapses/metabolismo , Sinapses/ultraestrutura , PaladarRESUMO
To investigate the practicability of establishing zebrafish lipid-lowering drug screening model and the effect of berberine (BBR) on hyperlipidemic zebrafish. Three-month-old zebrafishes were fed with 4% cholesterol for 0, 2, 4, 8, 14, 20, 25, 30 days, and the level of total cholesterol in serum was measured. Zebrafish were randomly divided into four groups: the control group, the high cholesterol diet group, the 0.01% simvastatin-treated group, the 0.1% berberine-treated group and the 0.2% berberine-treated group. The levels of total cholesterol (TC), triglyceride (TC), low density lipoprotein cholesterol (LDL-c) and high-density lipoprotein cholesterol (HDL-c) in serum were measured; the expression of hepatic HMGCR, LDLR and CYP7A1a mRNA expressions were detected by real time PCR. Oil red O staining was performed to observe the changes in fat content in the liver. According to the result, the level of serum TC in the 4% cholesterol diet group significantly was higher than that of the normal control group in a time-dependent manner and reached a stable level at the 20th day. The BBR group showed significant decreases in the levels of TC, TG and LDL-c, HMGCR mRNA expression and fat content and increases in LDLR and CYP7A1a mRNA. The hyperlipidemia zebrafish model was successfully established by feeding with 4% cholesterol for 20 days. The findings lay a foundation for further screenings on lipid-lowering drugs.
Assuntos
Animais , Feminino , Humanos , Masculino , Berberina , Colesterol , Metabolismo , Modelos Animais de Doenças , Medicamentos de Ervas Chinesas , Hiperlipidemias , Tratamento Farmacológico , Metabolismo , Hipolipemiantes , Fígado , Metabolismo , Triglicerídeos , Metabolismo , Peixe-Zebra , MetabolismoRESUMO
This work was mainly studied the effects of the four alkaloids from Coptidis Rhizoma on the mouse peritoneal macrophages in vitro and preliminarily discussed the regulating mechanisms. The effect of alkaloids from Coptidis Rhizoma on the vitality of macrophages was measured by the MTT assay. The effect of alkaloids on the phagocytosis of macrophages was determined by neutral red trial and respiratory burst activity was tested by NBT. The expressions of respiratory-burst-associated genes influenced by alkaloids were detected by qRT-PCR. The conformation change of membrane protein in macrophages by the impact of alkaloids was studied by fluorospectro-photometer. Results showed that the four alkaloids from Coptidis Rhizoma could increase the phagocytosis of macrophages in different level and berberine had the best effect. Berberine, coptisine and palmatine had up-regulation effects on respiratory burst activity of mouse peritoneal macrophages stimulated by PMA and regulatory activity on the mRNA expression of PKC, p40phox or p47phox, whereas the epiberberine had no significant influence on respiratory burst. Moreover, alkaloids from Coptidis Rhizoma could change the conformation of membrane protein and the berberine showed the strongest activity. The results suggested that the four alkaloids from Coptidis Rhizoma might activate macrophages through changing the conformation of membrane protein of macrophages and then enhanced the phagocytosis and respiratory burst activity of macrophages. Furthermore, the regulatory mechanism of alkaloids on the respiratory burst activity of macrophages may be also related to the expression level of PKC, p40phox and p47phox.
Assuntos
Animais , Feminino , Camundongos , Alcaloides , Farmacologia , Células Cultivadas , Coptis , Química , Medicamentos de Ervas Chinesas , Farmacologia , Expressão Gênica , Macrófagos Peritoneais , Fosfoproteínas , Genética , Metabolismo , Proteína Quinase C , Genética , Metabolismo , Rizoma , QuímicaRESUMO
Pentatricopeptide repeats (PPRs) genes constitute one of the largest gene families in plants, which play a broad and essential role in plant growth and development. In this study, the protein sequences annotated by the tomato (S. lycopersicum L.) genome project were screened with the Pfam PPR sequences. A total of 471 putative PPR-encoding genes were identified. Based on the motifs defined in A. thaliana L., protein structure and conserved sequences for each tomato motif were analyzed. We also analyzed phylogenetic relationship, subcellular localization, expression and GO analysis of the identified gene sequences. Our results demonstrate that tomato PPR gene family contains two subfamilies, P and PLS, each accounting for half of the family. PLS subfamily can be divided into four subclasses i.e., PLS, E, E+ and DYW. Each subclass of sequences forms a clade in the phylogenetic tree. The PPR motifs were found highly conserved among plants. The tomato PPR genes were distributed over 12 chromosomes and most of them lack introns. The majority of PPR proteins harbor mitochondrial or chloroplast localization sequences, whereas GO analysis showed that most PPR proteins participate in RNA-related biological processes.