Hydrogel arrays formed via differential wettability patterning enable combinatorial screening of stem cell behavior.

Here, we have developed a novel method for forming hydrogel arrays using surfaces patterned with differential wettability. Our method for benchtop array formation is suitable for enhanced-throughput, combinatorial screening of biochemical and biophysical cues from chemically defined cell culture substrates. We demonstrated the ability to generate these arrays without the need for liquid handling systems and screened the combinatorial effects of substrate stiffness and immobilized cell adhesion peptide concentration on human mesenchymal stem cell (hMSC) behavior during short-term 2-dimensional cell culture. Regardless of substrate stiffness, hMSC initial cell attachment, spreading, and proliferation were linearly correlated with immobilized CRGDS peptide concentration. Increasing substrate stiffness also resulted in increased hMSC initial cell attachment, spreading, and proliferation; however, examination of the combinatorial effects of CRGDS peptide concentration and substrate stiffness revealed potential interplay between these distinct substrate signals. Maximal hMSC proliferation seen on substrates with either high stiffness or high CRGDS peptide concentration suggests that some baseline level of cytoskeletal tension was required for hMSC proliferation on hydrogel substrates and that multiple substrate signals could be engineered to work in synergy to promote mechanosensing and regulate cell behavior. STATEMENT OF SIGNIFICANCE: Our novel array formation method using surfaces patterned with differential wettability offers the advantages of benchtop array formation for 2-dimensional cell cultures and enhanced-throughput screening without the need for liquid handling systems. Hydrogel arrays formed via our method are suitable for screening the influence of chemical (e.g. cell adhesive ligands) and physical (stiffness, size, shape, and thickness) substrate properties on stem cell behavior. The arrays are also fully compatible with commercially available micro-array add-on systems, which allows for simultaneous control of the insoluble and soluble cell culture environment. This study used hydrogel arrays to demonstrate that synergy between cell adhesion and mechanosensing can be used to regulate hMSC behavior.

Biomaterial arrays with defined adhesion ligand densities and matrix stiffness identify distinct phenotypes for tumorigenic and nontumorigenic human mesenchymal cell types.

Here, we aimed to investigate migration of a model tumor cell line (HT-1080 fibrosarcoma cells, HT-1080s) using synthetic biomaterials to systematically vary peptide ligand density and substrate stiffness. A range of substrate elastic moduli were investigated by using poly(ethylene glycol) (PEG) hydrogel arrays (0.34 - 17 kPa) and self-assembled monolayer (SAM) arrays (~0.1-1 GPa), while cell adhesion was tuned by varying the presentation of Arg-Gly-Asp (RGD)-containing peptides. HT-1080 motility was insensitive to cell adhesion ligand density on RGD-SAMs, as they migrated with similar speed and directionality for a wide range of RGD densities (0.2-5% mol fraction RGD). Similarly, HT-1080 migration speed was weakly dependent on adhesion on 0.34 kPa PEG surfaces. On 13 kPa surfaces, a sharp initial increase in cell speed was observed at low RGD concentration, with no further changes observed as RGD concentration was increased further. An increase in cell speed ~ two-fold for the 13 kPa relative to the 0.34 kPa PEG surface suggested an important role for substrate stiffness in mediating motility, which was confirmed for HT-1080s migrating on variable modulus PEG hydrogels with constant RGD concentration. Notably, despite ~ two-fold changes in cell speed over a wide range of moduli, HT-1080s adopted rounded morphologies on all surfaces investigated, which contrasted with well spread primary human mesenchymal stem cells (hMSCs). Taken together, our results demonstrate that HT-1080s are morphologically distinct from primary mesenchymal cells (hMSCs) and migrate with minimal dependence on cell adhesion for surfaces within a wide range of moduli, whereas motility is strongly influenced by matrix mechanical properties.

Substratum-induced differentiation of human pluripotent stem cells reveals the coactivator YAP is a potent regulator of neuronal specification.

Physical stimuli can act in either a synergistic or antagonistic manner to regulate cell fate decisions, but it is less clear whether insoluble signals alone can direct human pluripotent stem (hPS) cell differentiation into specialized cell types. We previously reported that stiff materials promote nuclear localization of the Yes-associated protein (YAP) transcriptional coactivator and support long-term self-renewal of hPS cells. Here, we show that even in the presence of soluble pluripotency factors, compliant substrata inhibit the nuclear localization of YAP and promote highly efficient differentiation of hPS cells into postmitotic neurons. In the absence of neurogenic factors, the effective substrata produce neurons rapidly (2 wk) and more efficiently (>75%) than conventional differentiation methods. The neurons derived from substrate induction express mature markers and possess action potentials. The hPS differentiation observed on compliant surfaces could be recapitulated on stiff surfaces by adding small-molecule inhibitors of F-actin polymerization or by depleting YAP. These studies reveal that the matrix alone can mediate differentiation of hPS cells into a mature cell type, independent of soluble inductive factors. That mechanical cues can override soluble signals suggests that their contributions to early tissue development and lineage commitment are profound.

The role of serum proteins in Staphylococcus aureus adhesion to ethylene glycol coated surfaces.

Bacterial adhesion on implants is a first step in the development of chronic foreign body associated infections. Finding strategies to minimize bacterial adhesion may contribute to minimize such infections. It is known that surfaces with oligo-ethylene-glycol (EG3OMe) or poly-ethylene-glycol (PEG2k) terminations decrease unspecific protein adsorption and bacterial adhesion. However, little is known about the influence of serum and its components on bacterial adhesion. We therefore prepared two coatings on gold surface with HS-(CH2)11EG3OMe (EG3OMe) and PEG2k-thiol and studied the role of bovine serum albumin (BSA), γ-globulins, and serum on Staphylococcus aureus adhesion. While BSA and lysozyme showed no adherence even when applied at very high concentrations (100 mg/ml), γ-globulins adsorbed already from 10 mg/ml on. The adsorption of γ-globulins was, however, significantly decreased when it was mixed with BSA in a ratio of 3:1, as it is in the serum. Pretreatment of EG3OMe and PEG2k coatings with γ-globulins or serum strongly promoted adherence of S. aureus when resuspended in buffer, suggesting that γ-globulins play a pivotal role in promoting S. aureus adhesion by its IgG binding proteins; the finding that a spa-deletion mutant, lacking the IgG binding protein A, showed decreased adherence corroborated this. Similarly, when S. aureus was pretreated with serum or γ-globulins its adherence was also significantly decreased. Our findings show that particularly γ-globulins bind to the coated surfaces thus mediating adherence of S. aureus via its protein A. As pretreatment of S. aureus with serum or γ-globulins significantly decreased adherence, treatment of patients with γ-globulins before implant surgery might lower the risk of implant-associated infections.

A chemically-defined screening platform reveals behavioral similarities between primary human mesenchymal stem cells and endothelial cells.

Chemically defined substrates, which rigorously control protein-surface and cell-surface interactions, can be used to probe the effects of specific biomolecules on cell behavior. Here we combined a chemically-defined, array-based format with automated, time-lapse microscopy to efficiently screen cell-substrate interactions. Self-assembled monolayers (SAMs) of alkanethiolates bearing oligo(ethylene glycol) units and reactive terminal groups were used to present cell adhesion peptides while minimizing non-specific protein interactions. Specifically, we describe rapid fabrication of arrays of 1 mm spots, which present varied densities of the integrin-binding ligand Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP). Results indicate that cell attachment, cell spreading, and proliferation exhibit strong dependencies on GRGDSP density for both human mesenchymal stem cells (hMSCs) and human umbilical vein endothelial cells (HUVECs). Furthermore, relative spreading and proliferation over a broad range of GRGDSP densities were similar for both primary cell types, and detailed comparison between cell behaviors identified a 1 : 1 correlation between spreading and proliferation for both HUVECs and hMSCs. Finally, time-lapse microscopy of SAM arrays revealed distinct adhesion-dependent migratory behaviors for HUVECs and hMSCs. These results demonstrate the benefits of using an array-based screening platform for investigating cell function. While the proof-of-concept focuses on simple cellular properties, the quantitative similarities observed for hMSCs and HUVECs provides a direct example of how phenomena that would not easily be predicted can be shown to correlate between different cell types.

On the stability of oligo(ethylene glycol) (C11EG6OMe) SAMs on gold: behavior at elevated temperature in contact with water.

In this study the temperature dependent confor-mation of hexa(ethylene glycol) self-assembling monolayers (SAMs) under aqueous conditions (in situ) is investigated. To this end characteristic absorption modes in the fingerprint region (1050-1500 cm(-1)) were monitored with real-time polarization modulation infrared spectroscopy. We found a temperature induced conformational change from predominantly helical to helical/all-trans. The process may be divided into two temperature regimes. Up to 40 °C the process is reversible after drying the monolayers in air and successive reimmersion in water, indicating a strong binding of the water molecules to the SAM. At higher temperatures, the conformational change is irreversible. Additionally, a rapid change to a larger mode width and a shift of the mode position to higher wavenumbers (blue-shift) at about 50 °C indicates structural changes caused by decreasing crystallinity of the SAM. While the conformational changes up to 40 °C are supposed to originate from an increased conformational freedom in combination with a stronger interaction with water molecules, the irreversibility and rapid change of mode characteristics at higher temperatures indicate chemical degradation. Complementary measurements in air show a fast and virtually complete reversibility up to 40 °C underlining the effect of the interaction of the ethylene glycol moiety with water. At temperatures above 50 °C modes indicating ester and formate groups appear, supporting the idea of chemical degeneration. Moreover, the temperature behavior is coverage dependent. At incomplete coverage the structural order of the SAM starts decreasing at lower temperatures. This study shows, that the conformational and structural change of hexa(ethylene glycol) SAMs at elevated temperature is an interplay of conformational changes of the SAM, its interaction with water and at higher temperatures its chemical degradation. Our experiments also underline the importance of the in situ analysis on the film structure.

Real-time PMIRRAS studies of in situ growth of C11Eg6OMe on gold and immersion effects.

We studied the growth of self-assembling monolayers of C(11)Eg(6)OMe on gold under aqueous conditions. With the help of polarisation modulation infrared reflection absorption spectroscopy (PMIRRAS) we monitored the evolution of characteristic absorption modes in the fingerprint region (1050-1500 cm(-1)) during the later stages of the growth of the SAM. We observed a change from rather amorphous structure with mixed all-trans and helical conformation to an ordered structure with predominantly helical structure over time. Changes of mode positions, intensities and broadness can be described by a single exponential. In addition, we investigated the effect of hydration for SAMs with different degrees of crystallinity. To that end, we compared their spectra at certain ordering levels in contact with aqueous solution with the corresponding spectra in air. SAMs with a highly ordered crystalline structure in air show the same structure under aqueous conditions. However, SAMs which are still crystalline in air, but less perfect, show rather amorphous spectral features under aqueous conditions indicating a strong interaction with water. This implies that the ability of water to penetrate the EG moiety strongly depends on its structure which in turn is related inter alia to the surface coverage. Since the interaction with water plays an important role in the prevention of unspecific adsorption on oligo(ethylene glycols) this is important for its application. Our experiments also underline the importance of the in situ analysis of the film structure.

Protein diffusion in crowded electrolyte solutions.

We report on a combined cold neutron backscattering and spin-echo study of the short-range and long-range nanosecond diffusion of the model globular protein bovine serum albumin (BSA) in aqueous solution as a function of protein concentration and NaCl salt concentration. Complementary small angle X-ray scattering data are used to obtain information on the correlations of the proteins in solution. Particular emphasis is put on the effect of crowding, i.e. conditions under which the proteins cannot be considered as objects independent of each other. We thus address the question at which concentration this crowding starts to influence the static and in particular also the dynamical behaviour. We also briefly discuss qualitatively which charge effects, i.e. effects due to the interplay of charged molecules in an electrolyte solution, may be anticipated. Both the issue of crowding as well as that of charge effects are particularly relevant for proteins and their function under physiological conditions, where the protein volume fraction can be up to approximately 40% and salt ions are ubiquitous. The interpretation of the data is put in the context of existing studies on related systems and of existing theoretical models.

Titanium-silicon oxide film structures for polarization-modulated infrared reflection absorption spectroscopy.

We present a titanium-silicon oxide film structure that permits polarization modulated infrared reflection absorption spectroscopy on silicon oxide surfaces. The structure consists of a ~6 nm sputtered silicon oxide film on a ~200 nm sputtered titanium film. Characterization using conventional and scanning transmission electron microscopy, electron energy loss spectroscopy, X-ray photoelectron spectroscopy and X-ray reflectometry is presented. We demonstrate the use of this structure to investigate a selectively protein-resistant self-assembled monolayer (SAM) consisting of silane-anchored, biotin-terminated poly(ethylene glycol) (PEG). PEG-associated IR bands were observed. Measurements of protein-characteristic band intensities showed that this SAM adsorbed streptavidin whereas it repelled bovine serum albumin, as had been expected from its structure.

Characterisation of morphology of self-assembled PEG monolayers: a comparison of mixed and pure coatings optimised for biosensor applications.

For detection of low concentrations of analytes in complex biological matrices using optical biosensors, a high surface loading with capture molecules and a low nonspecific binding of nonrelevant matrix molecules are essential. To tailor biosensor surfaces in such a manner, poly(ethylene glycols) (PEG) in varying lengths were immobilised covalently onto glass-type surfaces in different mixing ratios and concentrations, and were subsequently modified with three different kinds of receptors. The nonspecific binding of a model protein (ovalbumin, OVA) and the maximum loading of the respective analytes to these prepared surfaces were monitored using label-free and time-resolved reflectometric interference spectroscopy (RIfS). The three different analytes used varied in size: 150 kDa for the anti-atrazine antibody, 60 kDa for streptavidin and 5 kDa for the 15-bp oligonucleotide. We investigated if the mixing of PEG in different lengths could increase the surface loadings of analyte mimicking a three-dimensional matrix as was found using dextrans as sensor coatings. In addition, the effect on the surface loading was investigated with regard to the size of the analyte molecule using such mixed PEGs on the sensor surface. For further characterisation of the surface coatings, polarisation modulation infrared reflection absorption spectroscopy, atomic force microscopy, and ellipsometry were applied.

Gold nanoparticles decorated with oligo(ethylene glycol) thiols: kinetics of colloid aggregation driven by depletion forces.

We have studied the kinetics of the phase-separation process of mixtures of colloid and protein in solutions by real-time UV-vis spectroscopy. Complementary small-angle X-ray scattering (SAXS) was employed to determine the structures involved. The colloids used are gold nanoparticles functionalized with protein resistant oligo(ethylene glycol) (OEG) thiol, HS(CH2)11(OCH2CH2)6OMe (EG6OMe). After mixing with protein solution above a critical concentration, c*, SAXS measurements show that a scattering maximum appears after a short induction time at q = 0.0322 A-1, which increases its intensity with time but the peak position does not change with time, protein concentration and salt addition. The peak corresponds to the distance of the nearest neighbor in the aggregates. The upturn of scattering intensities in the low q-range developed with time indicating the formation of aggregates. No Bragg peaks corresponding to the formation of colloidal crystallites could be observed before the clusters dropped out from the solution. The growth kinetics of aggregates is followed in detail by real-time UV-vis spectroscopy, using the flocculation parameter defined as the integral of the absorption in the range of 600-800 nm wavelengths. At low salt addition (<0.5 M), a kinetic crossover from reaction-limited cluster aggregation (RLCA) to diffusion-limited cluster aggregation (DLCA) growth model is observed, and interpreted as being due to the effective repulsive interaction barrier between colloids within the depletion potential. Above 0.5 M NaCl, the surface charge of proteins is screened significantly, and the repulsive potential barrier disappeared, thus the growth kinetics can be described by a DLCA model only.

Gold nanoparticles decorated with oligo(ethylene glycol) thiols: protein resistance and colloidal stability.

The interactions between proteins and gold colloids functionalized with protein-resistant oligo(ethylene glycol) (OEG) thiol, HS(CH2)11(OCH2CH2)6OMe (EG6OMe), in aqueous solution have been studied by small-angle X-ray scattering (SAXS) and UV-vis spectroscopy. The mean size, 2R, and the size distribution of the decorated gold colloids have been characterized by SAXS. The monolayer-protected gold colloids have no correlations due to the low volume fraction in solution and are stable in a wide range of temperatures (5-70 degrees C), pH (1.3-12.4), and ionic strength (0-1.0 M). In contrast, protein (bovine serum albumin) solutions with concentrations in the range of 60-200 mg/mL (4.6-14.5 vol %) show a pronounced correlation peak in SAXS, which results from the repulsive electrostatic interaction between charged proteins. These protein interactions show significant dependence on ionic strength, as would be expected for an electrostatic interaction (Zhang et al. J. Phys. Chem. B 2007, 111, 251). For a mixture of proteins and gold colloids, the protein-protein interaction changes little upon mixing with OEG-decorated gold colloids. In contrast, the colloid-colloid interaction is found to be strongly dependent on the protein concentration and the size of the colloid itself. Adding protein to a colloidal solution results in an attractive depletion interaction between functionalized gold colloids, and above a critical protein concentration, c*, the colloids form aggregates and flocculate. Adding salt to such mixtures enhances the depletion effect and decreases the critical protein concentration. The aggregation is a reversible process (i.e., diluting the solution leads to dissolution of aggregates). The results also indicate that the charge of the OEG self-assembled monolayer at a curved interface has a rather limited effect on the colloidal stabilization and the repulsive interaction with proteins.

muO conotoxins inhibit NaV channels by interfering with their voltage sensors in domain-2.

The muO-conotoxins MrVIA and MrVIB are 31-residue peptides from Conus marmoreus, belonging to the O-superfamily of conotoxins with three disulfide bridges. They have attracted attention because they are inhibitors of tetrodotoxin-insensitive voltage-gated sodium channels (Na(V)1.8) and could therefore serve as lead structure for novel analgesics. The aim of this study was to elucidate the molecular mechanism by which muO-conotoxins affect Na(V) channels. Rat Na(V)1.4 channels and mutants thereof were expressed in mammalian cells and were assayed with the whole-cell patch-clamp method. Unlike for the M-superfamily mu-conotoxin GIIIA from Conus geographus, channel block by MrVIA was strongly diminished after activating the Na(V) channels by depolarizing voltage steps. Searching for the source of this voltage dependence, the gating charges in all four-voltage sensors were reduced by site-directed mutagenesis showing that alterations of the voltage sensor in domain-2 have the strongest impact on MrVIA action. These results, together with previous findings that the effect of MrVIA depends on the structure of the pore-loop in domain-3, suggest a functional similarity with scorpion beta-toxins. In fact, MrVIA functionally competed with the scorpion beta-toxin Ts1 from Tityus serrulatus, while it did not show competition with mu-GIIIA. Ts1 and mu-GIIIA did not compete either. Thus, similar to scorpion beta-toxins, muO-conotoxins are voltage-sensor toxins targeting receptor site-4 on Na(V) channels. They "block" Na(+) flow most likely by hindering the voltage sensor in domain-2 from activating and, hence, the channel from opening.

The muO-conotoxin MrVIA inhibits voltage-gated sodium channels by associating with domain-3.

Several families of peptide toxins from cone snails affect voltage-gated sodium (Na(V)) channels: mu-conotoxins block the pore, delta-conotoxins inhibit channel inactivation, and muO-conotoxins inhibit Na(V) channels by an unknown mechanism. The only currently known muO-conotoxins MrVIA and MrVIB from Conus marmoreus were applied to cloned rat skeletal muscle (Na(V)1.4) and brain (Na(V)1.2) sodium channels in mammalian cells. A systematic domain-swapping strategy identified the C-terminal pore loop of domain-3 as the major determinant for Na(V)1.4 being more potently blocked than Na(V)1.2 channels. muO-conotoxins therefore show an interaction pattern with Na(V) channels that is clearly different from the related mu- and delta-conotoxins, indicative of a distinct molecular mechanism of channel inhibition.

Tetrahydrobiopterin corrects Escherichia coli endotoxin-induced endothelial dysfunction.

Acute inflammation causes endothelial dysfunction, which is partly mediated by oxidant stress and inactivation of nitric oxide. The contribution of depletion of tetrahydrobiopterin (BH(4)), the cofactor required for nitric oxide generation, is unclear. In this randomized, double-blind, three-way crossover study, forearm blood flow (FBF) responses to ACh and glyceryltrinitrate (GTN) were measured before and 3.5 h after infusion of Escherichia coli endotoxin (LPS, 20 IU/kg iv) in eight healthy men. The effect of intra-arterial BH(4) (500 microg/min), placebo, or vitamin C (24 mg/min) was studied on separate days 3.5 h after LPS infusion. In addition, human umbilical vein endothelial cells were incubated for 24 h with vitamin C and LPS. ACh and GTN caused dose-dependent forearm vasodilation. The FBF response to ACh, which was decreased by 23 +/- 17% (P < 0.05) by LPS infusion, was restored to baseline reactivity by BH(4) and vitamin C. FBF responses to GTN were not affected by BH(4) or vitamin C. LPS increased leukocyte count, high-sensitivity C-reactive protein, IL-6, IL-1beta, IFN-gamma, monocyte chemoattractant protein-1, pulse rate, and body temperature and decreased platelet count and vitamin C concentration. Vitamin C increased forearm plasma concentration of BH(4) by 32% (P < 0.02). Incubation with LPS and vitamin C, but not LPS alone, increased intracellular BH(4) concentration in human umbilical vein endothelial cells. Impaired endothelial function during acute inflammation can be restored by BH(4) or vitamin C. Vitamin C may exert some of its salutary effects by increasing BH(4) concentration.

Simvastatin prevents vascular hyporeactivity during inflammation.

BACKGROUND: There is growing evidence that statins exert anti-inflammatory and antioxidative vascular actions that are independent of lipid lowering. We tested whether hyporeactivity to the endothelium-dependent vasodilator acetylcholine (ACh) and the vasoconstrictor norepinephrine (NE) during acute experimental inflammation could be prevented by simvastatin. METHODS AND RESULTS: In a randomized, placebo-controlled, parallel group study, forearm blood flow (FBF) responses to NE, ACh, and the endothelium-independent vasodilator nitroglycerin (NTG) were assessed at baseline, after 4 days of simvastatin 80 mg PO or placebo treatment, and during Escherichia coli endotoxin (lipopolysaccharide [LPS])-induced inflammation in 20 healthy volunteers. Additionally, markers of inflammation and neutrophil oxidative burst were assessed. Simvastatin and placebo had no effect on FBF or oxidative/inflammatory markers. LPS administration decreased the responses of FBF to NE by 43% (P<0.05) and decreased responses to ACh by 48% (P<0.05) but did not decrease FBF responses to NTG. Simvastatin completely preserved responses to NE and to ACh. The LPS-induced increases in neutrophil oxidative burst and plasma tumor necrosis factor-alpha concentrations were mitigated by simvastatin (P<0.05 versus placebo). CONCLUSIONS: This study demonstrates potent vasoprotective properties of high-dose simvastatin during endotoxemia that may be useful for patients with acute systemic inflammation and associated vascular hyporeactivity.