Reducing Dielectric Loss of High-Dielectric-Constant Elastomer via Rigid Short-Chain Crosslinking.

High-dielectric-constant elastomers have broad applications in wearable electronics, which can be achieved by the elastification of relaxor ferroelectric polymers. However, the introduction of soft long chains, with their high mobility under strong electric fields, leads to high dielectric loss. Given the relatively low modulus of relaxor ferroelectric polymers, elastification can be realized by introducing short-chain crosslinkers. In this work, a molecular engineering design is employed, utilizing a rigid short-chain crosslinker to create crosslinks with relaxor ferroelectric polymer, resulting in intrinsic elastomers characterized by a high dielectric constant but low dielectric loss. The obtained intrinsic ferroelectric elastomer possesses a high dielectric constant (35 at 1 kHz and 25 °C) and a low dielectric loss (0.09). Furthermore, this elastomer exhibits stable ferroelectric response and relaxor characteristics even under strains up to 80%. The study supplies a simple but effective method to reduce the dielectric loss of high-dielectric-constant intrinsic elastomers, thereby expanding their application fields in wearable electronics.

Tuning ferroelectric photovoltaic performance in R3c-CuNbO3 through compressive strain engineering: a first-principles study.

Most ferroelectric oxides exhibit relatively wide bandgaps, which pose limitations on their suitability for photovoltaics application. CuNbO3 possesses potential ferroelectric properties with an R3c polar structure that facilitate the separation of charge carriers under illumination, promoting the generation of photovoltaic effects. The optical and ferroelectric properties of R3c-CuNbO3, as well as the effect of strain on the properties are investigated by first-principles calculation in this paper. The calculated results indicate that R3c-CuNbO3 possesses a moderate band gap to absorb visible light. The interaction of Cu-O and Nb-O bonds is considered to have a crucial role in the photovoltaic properties of CuNbO3, contributing to the efficient absorption of visible light. The bandgap of CuNbO3 becomes smaller and the density of states near the conduction and valence bands becomes relatively uniform in distribution under compressive conditions, which improves the photoelectric conversion efficiency to 29.9% under conditions of bulk absorption saturation. The ferroelectric properties of CuNbO3 are driven by the Nb-O bond interactions, which are not significantly weakened by the compressive strain. CuNbO3 is expected to be an excellent ferroelectric photovoltaic material by modulation of compressive strain due to the stronger visible light absorption and excellent ferroelectric behavior.

Biomechanical evaluation of nickel-titanium shape-memory alloy enclosed interlocking intramedular nail / 南方医科大学学报

<p><b>OBJECTIVE</b>To study the biomechanical characteristics of Ni-Ti shape-memory alloy-enclosed interlocking intramedular nail Ni-Ti En for clinical application.</p><p><b>METHODS</b>Six transverse fractures were induced in 6 fresh humeral shafts and fixed with Ni-Ti En, plate, interlocking intramedullary nail, and Ender nail, respectively. The specimens then underwent stress analysis for comparison of the bending strength, twisting force, and flexibility.</p><p><b>RESULTS</b>The bending strength of Ni-Ti En was not significantly different from that of the plate and better than ender's nail; the twisting force of the interlocking intramedullary nail was comparable with the plate, but better than Ender nail.</p><p><b>CONCLUSION</b>Ni-Ti Enpossess good biomechanical property to meet the demand of osteosynthesis, and its less stress protection, freedom of distant nail locking, flexibility and stable fixation may accelerate fracture healing.</p>