[Remote passive sensing of aeroengine exhausts using FTIR system].

The traditional method of measuring the aeroengine exhausts is intrusive gas sampling analysis techniques. The disadvantages of the techniques include complex system, difficult operation, high costs and potential danger because of back-pressure effects. The non-intrusive methods have the potential to overcome these problems. So the remote FTIR passive sensing is applied to monitor aeroengine exhausts and determine the concentration of the exhausts gases of aeroengines. The principle of FTIR remote passive sensing is discussed. The model algorithm for the calibration of FTIR system, the radiance power distribution and gas concentration are introduced. TENSOR27 FTIR-system was used to measure the spectra of infrared radiation emitted by the hot gases of exhausts in a test rig. The emission spectra of exhausts were obtained under different thrusts. By analyzing the spectra, the concentrations of CO2, CO and NO concentration were calculated under 4 thrusts. Researches on the determination of concentration of the exhausts gases of aeroengines by using the remote FTIR sensing are still in early stage in the domestic aeronautics field. The results of the spectra and concentration in the aeroengine test are published for the first time. It is shown that the remote FTIR passive sensing techniques have a great future in monitoring the hot gas of the aeroengines exhausts.

[Passive detection of aeroengine exhaust based on Fourier transform infrared system].

Since the composition and concentration of aeroengine exhaust can reflect the combustion efficiency, they can provide the basis for condition based maintenance, and also the basis for the analysis of environment pollution caused by aeroengine exhaust. So the importance of aeroengine exhaust detection is evident. Up to now, the measurement of aeroengine exhaust is based on sampling analysis which is not convenient and can't meet the detection requirements when an aeroplane is flying-off or flying in the sky. Hence, new methods of exhaust detection must be studied. The passive measurement technology based on Fourier transform infrared spectroscopy (FTIR) was applied to the measurement of aeroengine exhaust in the present paper. At first, the principle of passive measurement based on FTIR was introduced in detail. On this basis, a model algorithm for gas concentration calculation was deduced based on the principle of infrared transmission. Then the feasibility of aeroengine exhaust measurement based on passive FTIR was analyzed, and the passive measurement method of aeroengine exhaust based on FTIR was given. In the end, an experiment of aeroengine exhaust passive measurement was carried out by a FTIR with the type of Tensor 27 produced by BRUKER. Good quality spectra of the exhaust and the background were measured. Based on the model algo rithm of passive measurement, the absorbance spectra of CO and NO were obtained respectively, and the concentrations of CO and NO were figured out. To check up the veracity of this method, a comparison was made with another apparatus. There were only little differences between the results of the two experiments, showing that the passive measurement technology based on FTIR could meet the requirements of aeroengine exhaust detection.