Container Closure Integrity of a Glass Prefillable Syringe in Deep Frozen Storage Conditions.

Development of novel pharmaceutical drug modalities has created a need for frozen storage and transportation. Accurate and easy assessment of container closure integrity (CCI) in frozen conditions remains a challenge. Thus, container closure systems (CCS) suitable for low temperatures have been primarily restricted to vials despite the growing popularity of prefillable syringes (PFS) for parenteral administration. A new dye ingress test method, suitable for testing at low temperatures, was developed and applied to PFS across a range of deep-frozen temperatures. The method is versatile and can easily be extended to other common CCS formats over a wide range of temperatures including storage on dry ice (-80 °C). This new method was paired with an orthogonal technique, laser-based CO2 headspace gas analysis, to evaluate the CCI of a glass PFS at temperatures from -50 °C to -80 °C. Both test methods showed comparable results and consistent CCI failure below a temperature of -70 °C. The primary mode of failure was the plunger-to-barrel interface, likely attributable to dimensional changes and loss of elasticity. This study demonstrates the temperature dependent CCI behavior of glass PFS and underscores the importance of thorough characterization of package integrity for deep frozen drug products.

Iron and Copper Doped Zinc Oxide Nanopowders as a Sensitizer of Industrial Energetic Materials to Visible Laser Radiation.

The development of methods ensuring reliable control over explosive chemical reactions is a critical task for the safe and efficient application of energetic materials. Triggering the explosion by laser radiation is one of the promising methods. In this work, we demonstrate a technique of applying the common industrial high explosive pentaerythritol tetranitrate (PETN) as a photosensitive energetic material by adding zinc oxide nanopowders doped with copper and iron. Nanopowders of ZnO:Fe and ZnO:Cu able to absorb visible light were synthesized. The addition of one mass percent nanopowders in PETN decreased the threshold energy density of its initiation through Nd:YAG laser second harmonic (2.33 eV) by more than five times. The obtained energetic composites can be reliably initiated by a CW blue laser diode with a wavelength of 450 nm and power of 21 W. The low threshold initiation energy and short irradiation exposure of the PETN-ZnO:Cu composite makes it applicable in laser initiation devices. PETN-ZnO:Cu also can be initiated by an infrared laser diode with a wavelength of 808 nm. The proposed photochemical mechanism of the laser-induced triggering of the explosion reaction in the studied energetic composites was formulated. The results demonstrate the high promise of using nanomaterials based on zinc oxide as a sensitizer of industrial energetic materials to visible laser radiation.

Chemical Composition and Toxicity of PM10 and PM0.1 Samples near Open-Pit Mines and Coal Power Stations.

Particulate matter (PM) <10 µm in size represents an extremely heterogeneous and variable group of objects that can penetrate the human respiratory tract. The present study aimed to isolate samples of coarse and ultrafine PM at some distance from polluting industries (1−1.5 km from the border of open-cast mines). PM was collected from snow samples which allowed the accumulation of a relatively large amount of ultrafine particles (UFPs) (50−60 mg) from five objects: three open-cast mines, coal power plants, and control territories. The chemical composition of PM was examined using absorption spectroscopy, luminescence spectroscopy, high-performance liquid chromatography, X-ray diffraction (XRD), and X-ray fluorescence (XRF) analyses of solid particle material samples. Toxicity was assessed in human MRC-5 lung fibroblasts after 6 h of in vitro exposure to PM samples. The absorption spectra of all the samples contained a wide non-elementary absorption band with a maximum of 270 nm. This band is usually associated with the absorption of dissolved organic matter (DOM). The X-ray fluorescence spectra of all the studied samples showed intense lines of calcium and potassium and less intense lines of silicon, sulfur, chlorine, and titanium. The proliferation of MRC-5 cells that were exposed to PM0.1 samples was significantly (p < 0.01) lower than that of MRC-5 cells exposed to PM10 at the same concentration, except for PM samples obtained from the control point. PM0.1 samples­even those that were collected from control territories­showed increased genotoxicity (micronucleus, ‱) compared to PM10. The study findings suggest that UFPs deserve special attention as a biological agent, distinct from larger PMs.

Pressure-dependent fouling behavior during sterile filtration of mRNA-containing lipid nanoparticles.

The COVID-19 pandemic has generated growing interest in the development of mRNA-based vaccines and therapeutics. However, the size and properties of the lipid nanoparticles (LNPs) used to deliver the nucleic acids can lead to unique phenomena during manufacturing that are not typical of other biologics. The objective of this study was to develop a more fundamental understanding of the factors controlling the performance of sterile filtration of mRNA-LNPs. Experimental filtration studies were performed with a Moderna mRNA-LNP solution using a commercially available dual-layer polyethersulfone sterile filter, the Sartopore 2 XLG. Unexpectedly, increasing the transmembrane pressure (TMP) from 2 to 20 psi provided more than a twofold increase in filter capacity. Also surprisingly, the effective resistance of the fouled filter decreased with increasing TMP, in contrast to the pressure-independent behavior expected for an incompressible media and the increase in resistance typically seen for a compressible fouling deposit. The mRNA-LNPs appear to foul the dual-layer filter by blocking the pores in the downstream sterilizing-grade membrane layer, as demonstrated both by scanning electron microscopy and derivative analysis of filtration data collected for the two layers independently. These results provide important insights into the mechanisms governing the filtration of mRNA-LNP vaccines and therapeutics.

Achieving tunable chemical reactivity through photo-initiation of energetic materials at metal oxide surfaces.

Known applications of high energy density materials are impressively vast. Despite this, we argue that energetic materials are still underutilized for common energy purposes due to our inability to control explosive chemical reactions releasing energy from these materials. The situation appears paradoxical as energetic materials (EM) possess massive amounts of energy and, hence, should be most appropriate for applications in many energy-intensive processes. Here, we discover how chemical decomposition reactions can be stimulated with laser excitation and therefore, highly controlled by selectively designing energetic material - metal oxide interfaces with an example of pentaerythritol tetranitrate (PETN)-MgO and trinitrotoluene (TNT)-MgO composite samples. Density functional theory and embedded cluster method calculations were combined with measurements of the optical absorption spectra and laser initiation experiments. We found that the first (1064 nm, 1.17 eV), second (532 nm, 2.33 eV), and third (355 nm, 3.49 eV) laser harmonics, to all of which pure energetic materials are transparent, can be effectively used to trigger explosive reactions in the PETN-MgO samples. We propose a consistent electronic mechanism that explains how specific sub-band optical transitions initiate decomposition chemistry. Also, this selectivity reveals a fundamental difference between materials chemistry at interfaces as we show on examples of PETN and TNT energetic materials.

Kirigami-inspired, highly stretchable micro-supercapacitor patches fabricated by laser conversion and cutting.

The recent developments in material sciences and rational structural designs have advanced the field of compliant and deformable electronics systems. However, many of these systems are limited in either overall stretchability or areal coverage of functional components. Here, we design a construct inspired by Kirigami for highly deformable micro-supercapacitor patches with high areal coverages of electrode and electrolyte materials. These patches can be fabricated in simple and efficient steps by laser-assisted graphitic conversion and cutting. Because the Kirigami cuts significantly increase structural compliance, segments in the patches can buckle, rotate, bend and twist to accommodate large overall deformations with only a small strain (<3%) in active electrode areas. Electrochemical testing results have proved that electrical and electrochemical performances are preserved under large deformation, with less than 2% change in capacitance when the patch is elongated to 382.5% of its initial length. The high design flexibility can enable various types of electrical connections among an array of supercapacitors residing in one patch, by using different Kirigami designs.

Photochemistry of the α-Al2O3-PETN Interface.

Optical absorption measurements are combined with electronic structure calculations to explore photochemistry of an α-Al2O3-PETN interface formed by a nitroester (pentaerythritol tetranitrate, PETN, C5H8N4O12) and a wide band gap aluminum oxide (α-Al2O3) substrate. The first principles modeling is used to deconstruct and interpret the α-Al2O3-PETN absorption spectrum that has distinct peaks attributed to surface F°-centers and surface-PETN transitions. We predict the low energy α-Al2O3 F°-center-PETN transition, producing the excited triplet state, and α-Al2O3 F°-center-PETN charge transfer, generating the PETN anion radical. This implies that irradiation by commonly used lasers can easily initiate photodecomposition of both excited and charged PETN at the interface. The feasible mechanism of the photodecomposition is proposed.

Topography of photochemical initiation in molecular materials.

We propose a fluctuation model of the photochemical initiation of an explosive chain reaction in energetic materials. In accordance with the developed model, density fluctuations of photo-excited molecules serve as reaction nucleation sites due to the stochastic character of interactions between photons and energetic molecules. A further development of the reaction is determined by a competition of two processes. The first process is growth in size of the isolated reaction cell, leading to a micro-explosion and release of the material from the cell towards the sample surface. The second process is the overlap of reaction cells due to an increase in their size, leading to the formation of a continuous reaction zone and culminating in a macro-explosion, i.e., explosion of the entire area, covering a large part of the volume of the sample. Within the proposed analytical model, we derived expressions of the explosion probability and the duration of the induction period as a function of the initiation energy (exposure). An experimental verification of the model was performed by exploring the initiation of pentaerythritol tetranitrate (PETN) with the first harmonic of YAG: Nd laser excitation (1,064 nm, 10 ns), which has confirmed the adequacy of the model. This validation allowed us to make a few quantitative assessments and predictions. For example, there must be a few dozen optically excited molecules produced by the initial fluctuations for the explosive decomposition reaction to occur and the life-time of an isolated cell before the micro-explosion must be of the order of microseconds.