Enhanced photocatalytic activity of BiVO4 powders synthesized in presence of EDTA for the decolorization of rhodamine B from aqueous solution.

Bismuth vanadate (BiVO4) powders were successfully synthesized in presence of EDTA via microwave irradiation and used as photocatalysts in the oxidation reaction of rhodamine B (rhB) under visible light. Different concentrations of EDTA (0.5 to 10%) to chelate Bi3+ ions were employed on the BiVO4 synthesis. Under the presence of EDTA, a monoclinic crystalline structure was obtained, whereas a mixture of monoclinic and tetragonal phases was observed in the absence of EDTA. In addition, the use of different EDTA concentrations promoted the formation the different shapes of particles. The BiVO4 sample synthesized with low concentration of EDTA (0.5%) exhibited about 85% of rhB decolorization in 300 min at pH 7.5. Therefore, this high efficiency can be attributed to a combination of intrinsic properties such as the morphology type and monoclinic structure of BiVO4 particles.

Iron-based adsorbent prepared from Litchi peel biomass via pyrolysis process for the removal of pharmaceutical pollutant from synthetic aqueous solution.

A porous iron-based adsorbent obtained from litchi peel via pyrolysis process was prepared in this work, in order to evaluate its adsorptive potential for the removal of a pharmaceutical dye (amaranth) from aqueous solution. The material was characterized by X-ray diffraction, nitrogen adsorption-desorption isotherms, and scanning electron microscopy. Several isotherm and kinetic models were tested aiming to represent the amaranth dye adsorption. The prepared sample presented magnetic property, and a mesoporous texture constituted of graphite and three iron-based phases. The adsorption kinetics of amaranth on the adsorbent followed the pseudo-second-order model, whereas the equilibrium data were in good agreement with the BET isotherm, being represented by a sigmoid-shaped adsorption isotherm. The maximum adsorption capacity for the amaranth dye was found to be 44.87 mg g-1, demonstrating that the material prepared in this work showed to be a promising adsorbent for the removal of amaranth from aqueous solution.

Degradation of Amaranth azo dye in water by heterogeneous photo-Fenton process using FeWO4 catalyst prepared by microwave irradiation.

FeWO4 particles were synthesized by a simple, rapid and facile microwave technique and their catalytic properties in heterogeneous photo-Fenton reaction were evaluated. This material was employed in the degradation of Amaranth azo dye. Individual and interactive effects of operational parameters such as pH, dye concentration and H2O2 dosage on the decolorization efficiency of Amaranth dye were evaluated by 2(3) central composite design. According to characterization techniques, a porous material and a well-crystallized phase of FeWO4 oxide were obtained. Regarding the photo-Fenton reaction assays, up to 97% color and 58% organic carbon removal were achieved in the best experimental conditions. In addition, the photo-Fenton process maintained treatment efficiency over five catalyst reuse cycles to indicate the durability of the FeWO4 catalyst. In summary, the results reveal that the synthesized FeWO4 material is a promising catalyst for wastewater treatment by heterogeneous photo-Fenton process.