Electrochemical Reduction of CO2 at Coinage Metal Nanodendrites in Aqueous Ethanolamine.

Electrocatalytic reduction of CO2 into usable chemicals is a promising path to address climate change and energy challenges. Herein, we demonstrate the synthesis of unique coinage metal (Cu, Ag, and Au) nanodendrites (NDs) via a facile galvanic replacement reaction (GRR), which can be effective electrocatalysts for the reduction of CO2 in an ethanolamine (EA) solution. Each metal ND surface was directly grown on glassy-carbon (GC) substrates from a mixture of Zn dust and the respective precursor solution. The electrocatalytic activities of the synthesized ND surfaces were optimized for CO2 reduction in EA solution by varying their composition. It was determined that a 0.05 mol fraction of EA exhibited the highest catalytic activity for all metal NDs. Linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) techniques showed that metal-ND electrodes possessed higher current densities, lower onset potentials and lower charge-transfer resistances for CO2 reduction than their smooth polycrystalline electrode counterparts, indicating improved CO2 reduction catalytic activity. It was determined, using FTIR and NMR spectroscopy, that formate was produced as a result of the CO2 reduction.

Evaluation of Heavy Metals in Streams of the Bacanga and Cachorros Watersheds in São Luís, Brazil.

Impacts on urban water resources are invariably caused by the development of urban centers and the occupation of the watershed. The release of untreated effluents and urban runoff are sources of metals in adjacent water bodies. It is therefore important to conduct studies on the occurrence of these trace elements in the environment and the risks posed to human health. The aim of the present study was to determine Cd, Pb, Cu, and Zn concentrations in water bodies located in the Bacanga and Cachorros watersheds and correlate the occurrence of these elements with physicochemical variables of the water (temperature, pH, dissolved oxygen, and electrical conductivity). The variables were determined at the collection site with the aid of a multiparameter kit. Heavy metal concentrations were determined using anodic stripping voltammetry. The results revealed that the streams were not contaminated with the metals analyzed. The only exception was copper in the Limoeiro and Murtura streams, both of which are located in the industrial complex.

Fast quantification of α-lipoic acid in biological samples and dietary supplements using batch injection analysis with amperometric detection.

Batch injection analysis (BIA) with amperometric detection, using a pyrolytic graphite electrode modified with cobalt phthalocyanine (PG/CoPc), was employed for determination of α-lipoic acid (ALA) in pharmaceutical product and in synthetic urine samples. The proposed BIA method is based on the application of a potential of +0.9V vs. Ag/AgCl, KCl sat, enabling quantification of ALA over a concentration range from 1.3×10(-6) to 1.0×10(-4)molL(-1), with a detection limit of 1.5×10(-8)molL(-1). A sampling rate of 180 injections per hour was attained and measurements of the reproducibility of successive injections (100µmolL(-1) ALA on the same electrode) showed a RSD of 2.11% for 40 successive injections. The new sensor was utilised for ALA quantification in a dietary pharmaceutical supplement and in synthetic urine and the results obtained for both samples were compared with parallel analysis using high performance liquid chromatography (HPLC), the method recommended by the United States Pharmacopeia. The results obtained were similar (at a 95% confidence level) and in the case of the synthetic urine sample (prepared with a known amount of ALA) the recovery was situated between 98.0% and 102.6%.

Fast simultaneous determination of trimethoprim and sulfamethoxazole by capillary zone electrophoresis with capacitively coupled contactless conductivity detection.

The association of trimethoprim and sulfamethoxazole is a very effective with antibiotic properties, and commonly used in the treatment of a variety of infections. Due to the importance in diseases treatment of humans and also of animals, the development of methods for their quantification in commercial formulations is highly desirable. In the present study, a rapid method for simultaneous determination of these compounds using CE with capacitively coupled contactless conductivity detection was developed. A favorable working region for both analytes was from 12.5 to 200 µmol/L (linear responses with R > 0.999 for N = 5). Other parameters calculated were sensitivity (1.28 ± 0.10/1.45 ± 0.11) min/(µmol L), RSD (4.5%/2.0%), and LOD (1.1/3.3) µmol/L for trimethoprim and sulfamethoxazole, respectively. Under this condition, the total run time was only 2.6 min. The proposed method was applied to the determination of trimethoprim and sulfamethoxazole in commercial samples and the results were compared to those obtained by using a HPLC pharmacopoeia method. This new method is advantageous for quality-control analyses of trimethoprim and sulfamethoxazole in pharmaceuticals samples, because it is rapid and precise. Moreover, it is less laborious and demands minimum amounts of reagents in comparison to the recommended method.

Quantification of N-acetylcysteine in pharmaceuticals using cobalt phthalocyanine modified graphite electrodes.

Flow injection analysis (FIA) with amperometric detection was employed for the quantification of N-acetylcysteine (NAC) in pharmaceutical formulations, utilizing an ordinary pyrolytic graphite (OPG) electrode modified with cobalt phthalocyanine (CoPc). Cyclic voltammetry was used in preliminary studies to establish the best conditions for NAC analysis. In FIA-amperometric experiments the OPG-CoPc electrode exhibited sharp and reproducible current peaks over a wide linear working range (5.0×10(-5)-1.0×10(-3) mol L(-1)) in 0.1 mol L(-1) NaOH solution. High sensitivity (130 mA mol(-1) cm(2)) and a low detection limit (9.0×10(-7) mol L(-1)) were achieved using the sensor. The repeatability (R.S.D.%) for 13 successive flow injections of a solution containing 5.0×10(-4) mol L(-1) NAC was 1.1%. The new procedure was applied in analyses of commercial pharmaceutical products and the results were in excellent agreement with those obtained using the official titrimetric method. The proposed amperometric method is highly suitable for quality control analyses of NAC in pharmaceuticals since it is rapid, precise and requires much less work than the recommended titrimetric method.

FIA-potentiometry in the sub-Nernstian response region for rapid and direct chloride assays in milk and in coconut water.

A simple and reliable FIA-potentiometric system for rapid assays of chloride in certain food samples is described and evaluated. The system is constituted by an aquarium air pump to propel the carrier solution, a manually operated injector, a homemade dialysis flow cell, a solid-state chloride detector (Ag/AgCl), a reference electrode and a multimeter connected to a microcomputer for data acquisition. The dialysis unit enables direct analysis of liquid food samples without any other previous treatment. The principal novelties are the precision (R.S.D. of 1.2% for whole milk) and rapidity (90 determinations/h) of FIA measurements near and below the lower end of the linear (Nernstian) response region of the chloride ion-selective electrode (ISE), with an estimated detection limit (3s) of 0.4mgL(-1) Cl(-) in the sample injected in donor stream. Data of peak potential versus sample chloride concentration (donor stream) was accurately fitted with a quadratic polynomial over the range between 4 and 1000mgL(-1) (r(2)=0.9999) and used as a calibration curve. The method was applied to the determination of chloride in milk and in coconut water samples. The validation of the results was done by comparison with a NIST reference material (milk) or by capillary electrophoresis (coconut water). For all analysis, no significant difference at a 95% confidence level was observed.