Utilization of rice production residues as a reinforcing agent in bioadhesives based on polyphenols extracted from the bark of trees from the Brazilian Cerrado biome.

The scarcity of nonrenewable resources and the increase in environmental pollution have intensified the search for materials that exhibit specific characteristics and are nontoxic, renewable, and sustainable. Thus, the objective of this work was to produce natural polyphenol adhesives reinforced with rice husk and its ash to increase the mechanical resistance and moisture resistance of the glue line in wood bonded joints. Polyphenols were extracted from the bark of Stryphnodendron adstringens (Mart.) Coville (barbatimão). Adhesives were produced with a 50 % solid and 50 % liquid composition. Rice husk and husk ash underwent X-ray fluorescence analysis (XRF). Adhesives and reinforcement material were characterized by Fourier transform infrared (FTIR) and thermogravimetric analyses (TGA). The adhesives were glued in a mechanical press in specimens made of Pinus elliottii, which were subjected to shear testing of the wet and dry glue line. As a result, the chemical components present in rice husk and its ash positively influenced the properties of the adhesives. The mechanical glue line shear test showed that the adhesive reinforced with rice husk ash did not show a statistically significant difference. However, natural adhesives based on polyphenols from barbatimão strengthened with rice husk and ash showed improved properties, demonstrating how much it pays to use the residue of rice production to reinforce the matrix of tannin adhesives. Thus, it can be determined that reinforcement with rice husk and ash is efficient in improving some properties of natural adhesives based on polyphenols.

Substitution of petrochemical compounds for polyphenols of natural origin reinforced with cellulose nanofibrils to formulate adhesives for wood bonding.

Vegetable tannins are excellent options to produce adhesives for the panel industry since they have the capacity to reduce formaldehyde emissions and are derived from renewable sources. They also allow for the possibility of increasing the resistance of the glue line through the use of natural reinforcements such as cellulose nanofibrils. Condensed tannins, polyphenols isolated from tree bark, are widely studied for the production of natural adhesives as an alternative to commercial synthetic adhesives. So, the purpose of our research is to show a natural adhesive alternative for wood bonding. Therefore, the objective of the study was to evaluate the quality of tannin adhesives of different species reinforced with different nanofibrils and thus predict which adhesive is the most promising at different concentrations of reinforcement and with different types of polyphenols. To meet this objective, polyphenols were extracted from the bark, nanofibrils were obtained, and both processes followed the current standards. Then, the adhesives were produced, their properties were characterized, and they were chemically analyzed via Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). A mechanical shear analysis of the glue line was also performed. According to the results, the addition of cellulose nanofibrils affected the physical properties of the adhesives, mostly the content of solids and the gel time. In the FTIR spectra, the OH band of the 5% Pinus and 5% Eucalyptus (EUC) TEMPO in the barbatimao adhesive and the 5% EUC of the cumate red adhesive were reduced, possibly due to their higher moisture resistance. Mechanical tests of the glue line showed that barbatimao with 5% Pinus and cumate red with 5% EUC performed best in the dry and wet shear tests. The control was the best-performing sample in the test of the commercial adhesives. The cellulose nanofibrils used as reinforcement did not change the thermal resistance of the adhesives. Therefore, the addition of cellulose nanofibrils to these tannins is an interesting means of increasing the mechanical strength, as occurred in commercial adhesive with 5% EUC. Thus, the physical and mechanical properties of tannin adhesives were better with reinforcement, making it possible to expand the use of these adhesives in the panel industry. At the industrial level, it is important to replace synthetic products with natural ones. Besides environmental and health issues, there is the question of the value of petroleum-based products, which have been widely studied so that they can be replaced.

Use of neural network and multivariate statistics in the assessment of pellets produced from the exploitation of agro-industrial residues.

The production of pellets from residual biomass generated monocropping by Brazilian agribusiness is an environmentally and economically interesting alternative in view of the growing demand for clean, low-cost, and efficient energy. In this way, pellets were produced with sugarcane bagasse and coffee processing residues, in different proportions with charcoal fines, aiming to improve the energy properties and add value to the residual biomass. The pellets had their properties compared to the commercial quality standard. Artificial neural networks and multivariate statistical models were used to validate the best treatments for biofuel production. The obtained pellets presented the minimum characteristics required by DIN EN 14961-6. However, the sugarcane bagasse biomass distinguished itself for use in energy pellets, more specifically, the treatment with 20% of fine charcoal because of its higher net calorific value (17.85 MJ·kg-1) and energy density (13.30 GJ·m-3), achieving the characteristics required for type A pellets in commercial standards. The statistical techniques were efficient and grouped the treatments with similar properties, as well as validated the sugarcane biomass mixed with charcoal fines for pellet production. Thus, these results demonstrate that waste charcoal fines mixed with agro-industrial biomass have great potential to integrate the production chain for energy generation.