Heterotelechelic Silicones: Facile Synthesis and Functionalization Using Silane-Based Initiators.

The synthetic utility of heterotelechelic polydimethylsiloxane (PDMS) derivatives is limited due to challenges in preparing materials with high chain-end fidelity. In this study, anionic ring-opening polymerization (AROP) of hexamethylcyclotrisiloxane (D3) monomers using a specifically designed silyl hydride (Si-H)-based initiator provides a versatile approach toward a library of heterotelechelic PDMS polymers. A novel initiator, where the Si-H terminal group is connected to a C atom (H-Si-C) and not an O atom (H-Si-O) as in traditional systems, suppresses intermolecular transfer of the Si-H group, leading to heterotelechelic PDMS derivatives with a high degree of control over chain ends. In situ termination of the D3 propagating chain end with commercially available chlorosilanes (alkyl chlorides, methacrylates, and norbornenes) yields an array of chain-end-functionalized PDMS derivatives. This diversity can be further increased by hydrosilylation with functionalized alkenes (alcohols, esters, and epoxides) to generate a library of heterotelechelic PDMS polymers. Due to the living nature of ring-opening polymerization and efficient initiation, narrow-dispersity (D < 1.2) polymers spanning a wide range of molar masses (2-11 kg mol-1) were synthesized. With facile access to α-Si-H and ω-norbornene functionalized PDMS macromonomers (H-PDMS-Nb), the synthesis of well-defined supersoft (G' = 30 kPa) PDMS bottlebrush networks, which are difficult to prepare using established strategies, was demonstrated.

Diels-Alder Photoclick Patterning of Extracellular Matrix for Spatially Controlled Cell Behaviors.

Strategies that mimic the spatial complexity of natural tissues can provide cellular scaffolds to probe fundamental questions in cell biology and offer new materials for regenerative medicine. Here, the authors demonstrate a light-guided patterning platform that uses natural engineered extracellular matrix (ECM) proteins as a substrate to program cellular behaviors. A photocaged diene which undergoes Diels-Alder-based click chemistry upon uncaging with 365 nm light is utilized. By interfacing with commercially available maleimide dienophiles, patterning of common ECM proteins (collagen, fibronectin Matrigel, laminin) with readily purchased functional small molecules and growth factors is achieved. Finally, the use of this platform to spatially control ERK activity and migration in mammalian cells is highlighted, demonstrating programmable cell behavior through patterned chemical modification of natural ECM.

Building Tunable Degradation into High-Performance Poly(acrylate) Pressure-Sensitive Adhesives.

Pressure-sensitive adhesives (PSAs) based on poly(acrylate) chemistry are common in a wide variety of applications, but the absence of backbone degradability causes issues with recycling and sustainability. Here, we report a strategy to create degradable poly(acrylate) PSAs using simple, scalable, and functional 1,2-dithiolanes as drop-in replacements for traditional acrylate comonomers. Our key building block is α-lipoic acid, a natural, biocompatible, and commercially available antioxidant found in various consumer supplements. α-Lipoic acid and its derivative ethyl lipoate efficiently copolymerize with n-butyl acrylate under conventional free-radical conditions leading to high-molecular-weight copolymers (Mn > 100 kg mol-1) containing a tunable concentration of degradable disulfide bonds along the backbone. The thermal and viscoelastic properties of these materials are practically indistinguishable from nondegradable poly(acrylate) analogues, but a significant reduction in molecular weight is realized upon exposure to reducing agents such as tris (2-carboxyethyl) phosphine (e.g., Mn = 198 kg mol-1 → 2.6 kg mol-1). By virtue of the thiol chain ends produced after disulfide cleavage, degraded oligomers can be further cycled between high and low molecular weights through oxidative repolymerization and reductive degradation. Transforming otherwise persistent poly(acrylates) into recyclable materials using simple and versatile chemistry could play a pivotal role in improving the sustainability of contemporary adhesives.

Controlled Synthesis of a Homopolymer Network Using a Well-Defined Single-Component Diels-Alder Cyclopentadiene Monomer.

Cyclopentadiene is known for its high reactivity and propensity to dimerize, making monomer synthesis and polymerization notoriously challenging. In fact, despite its long history and compelling chemistry, only two reports have appeared in the literature since the first attempt to homopolymerize cyclopentadiene by Staudinger in 1926. Herein, we present a strategy not only to synthesize, isolate, and homopolymerize a well-defined tetracyclopentadiene monomer but also to de-cross-link the network homopolymer. Mechanical properties are also investigated, including creep-recovery, shape memory, and tensile behaviors. Interestingly, the tensile test reflects a tough and elastic material, in contrast to prior Cp-based homopolymer networks. This work provides a versatile platform to access and study new cyclopentadiene-based and better-defined homopolymer networks with potential applications ranging from shape memory polymers to degradable thermosets.

Photoswitchable gating of non-equilibrium enzymatic feedback in chemically communicating polymersome nanoreactors.

The circadian rhythm generates out-of-equilibrium metabolite oscillations that are controlled by feedback loops under light/dark cycles. Here we describe a non-equilibrium nanosystem comprising a binary population of enzyme-containing polymersomes capable of light-gated chemical communication, controllable feedback and coupling to macroscopic oscillations. The populations consist of esterase-containing polymersomes functionalized with photo-responsive donor-acceptor Stenhouse adducts (DASA) and light-insensitive semipermeable urease-loaded polymersomes. The DASA-polymersome membrane becomes permeable under green light, switching on esterase activity and decreasing the pH, which in turn initiates the production of alkali in the urease-containing population. A pH-sensitive pigment that absorbs green light when protonated provides a negative feedback loop for deactivating the DASA-polymersomes. Simultaneously, increased alkali production deprotonates the pigment, reactivating esterase activity by opening the membrane gate. We utilize light-mediated fluctuations of pH to perform non-equilibrium communication between the nanoreactors and use the feedback loops to induce work as chemomechanical swelling/deswelling oscillations in a crosslinked hydrogel. We envision possible applications in artificial organelles, protocells and soft robotics.

Controlling the Isomerization of Photoresponsive Molecules through a Limiting Tautomerization Strategy.

Controlling the multistage photoresponsivity remains a challenge, in part, due to the spontaneous tautomerization between isomers. Herein, we present a strategy to access three independent states (linear, cyclic keto, and cyclic enolate) of crown ether (CE)-substituted donor-acceptor Stenhouse adducts (DASAs) by limiting the tautomerization of the closed isomers. The linear-cyclic keto isomerization is reversibly triggered by treatment with metal ions (Na+ or K+) and CE, while the linear-cyclic enolate isomerization is induced by green light and heat. Density functional theory and molecular dynamics calculation results suggest that the steric effect and supramolecular interaction between the electron-donating and electron-withdrawing moieties play an important role in hindering the tautomerization between cyclic keto and cyclic enolate DASA-CE. The strategy to influence key steps in the photoswitching process inspires well-controlled multistage isomerization of photoresponsive molecules.

Carbon Nanotube Composites with Bottlebrush Elastomers for Compliant Electrodes.

Wearable electronics and biointerfacing technology require materials that are both compliant and conductive. The typical design strategy exploits polymer composites containing conductive particles, but the addition of a hard filler generally leads to a substantial increase in modulus that is not well-matched to biological tissue. Here, we report a new class of supersoft, conductive composites comprising carbon nanotubes (CNT) embedded in bottlebrush polymer networks. By virtue of the bottlebrush polymer architecture, these materials are several orders of magnitude softer than comparable composites in the literature involving linear polymer networks. For example, a CNT content of 0.25 wt % yields a shear modulus of 66 kPa while maintaining a typical conductivity for a CNT composite (ca. 10-2 S/m). An added benefit of this bottlebrush matrix chemistry is the presence of dynamic polyester bonds that facilitate thermal (re)processing. This unique strategy of designing soft composites provides new opportunities to tailor the structure and properties of sustainable advanced materials.

Interconvertible Living Radical and Cationic Polymerization using a Dual Photoelectrochemical Catalyst.

The necessity of well-tuned reactivity for successful controlled polymer synthesis often comes with the price of limited monomer substrate scope. We demonstrate here the on-demand interconversion between living radical and cationic polymerization using two orthogonal stimuli and a dual responsive single catalyst. The dual photo- and electrochemical reactivity of 10-phenylphenothiazine catalyst provides control of the polymer's molar mass and composition by orthogonally activating the common dormant species toward two distinct chemical routes. This enables the synthesis of copolymer chains that consist of radically and cationically polymerized segments where the length of each block is controlled by the duration of the stimulus exposure. By alternating the application of photochemical and electrochemical stimuli, the on-demand incorporation of acrylates and vinyl ethers is achieved without compromising the end-group fidelity or dispersity of the formed polymer. The results provide a proof-of-concept for the ability to substantially extend substrate scope for block copolymer synthesis under mild, metal-free conditions through the use of a single, dual reactive catalyst.

Norbornadiene Chain-End Functional Polymers as Stable, Readily Available Precursors to Cyclopentadiene Derivatives.

A novel method for facile postpolymerization functionalization of synthetic polymers using terminal norbornadiene (NBD) building blocks is presented. Incorporation of the NBD functionality streamlines the synthesis of a wide array of block polymers utilizing multistep click chemistry strategies. Previously, the use of NBD-functionalized initiators produced polymers that underwent a cascade of Diels-Alder (DA) reactions to unveil a reactive cyclopentadiene (Cp) chain end. When coupled with a maleimide-bearing counterpart, a highly efficient DA cycloaddition with the terminal Cp can occur. To extend this concept to a range of polyacrylates and commercially available poly(ethylene glycol) systems, we developed a novel NBD acid building block for postpolymerization functionalization. Employing this process, we have demonstrated straightforward access to a library of block polymers that leverage this NBD click platform.

Dynamic Bottlebrush Polymer Networks: Self-Healing in Super-Soft Materials.

We introduce a design strategy to expand the range of accessible mechanical properties in covalent adaptable networks (CANs) using bottlebrush polymer building blocks. Well-defined bottlebrush polymers with rubbery poly(4-methylcaprolactone) side chains were cross-linked in formulations that include a bislactone and strong Lewis acid (tin ethylhexanoate). The resulting materials exhibit tunable stress-relaxation rates at elevated temperatures (160-180 °C) due to dynamic ester cross-links that undergo transesterification with residual hydroxy groups. Varying the cross-linker loading or bottlebrush backbone degree of polymerization yields predictable low-frequency shear moduli ca. 10-100 kPa, well below values typical of linear polymer CANs (1 MPa). These extensible networks can be stretched to strains as large as 350% before failure and undergo efficient self-healing to recover >85% of their original toughness upon repeated fracture and melt processing. In summary, molecular architecture creates new opportunities to tailor the mechanical properties of CANs in ways that are otherwise difficult to achieve.

What happens in the dark? Assessing the temporal control of photo-mediated controlled radical polymerizations.

A signature of photo-mediated controlled polymerizations is the ability to modulate the rate of polymerization by turning the light source 'on' and 'off.' However, in many reported systems, growth can be reproducibly observed during dark periods. In this study, emerging photo-mediated controlled radical polymerizations are evaluated with in situ 1H NMR monitoring to assess their behavior in the dark. Interestingly, it is observed that Cu-mediated systems undergo long-lived, linear growth during dark periods in organic media.

Dual-pathway chain-end modification of RAFT polymers using visible light and metal-free conditions.

We report a metal-free strategy for the chain-end modification of RAFT polymers utilizing visible light. By turning the light source on or off, the reaction pathway in one pot can be switched between either complete desulfurization (hydrogen chain-end) or simple cleavage (thiol chain-end), respectively. The versatility of this process is exemplified by application to a wide range of polymer backbones under mild, quantitative conditions using commercial reagents.

Desulfurization-bromination: direct chain-end modification of RAFT polymers.

We report a simple and efficient transformation of thiol and thiocarbonylthio functional groups to bromides using stable and commercially available brominating reagents. This procedure allows for the quantitative conversion of a range of small molecule thiols (including primary, secondary and tertiary) to the corresponding bromides under mild conditions, as well as the facile chain-end modification of polystyrene (PS) homopolymers and block copolymers prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization. Specifically, the direct chain-end bromination of PS prepared by RAFT was achieved, where the introduced terminal bromide remained active for subsequent modification or chain-extension using classical atom transfer radical polymerization (ATRP). This transformation sets the foundation for bridging RAFT and ATRP, two of the most widely used controlled radical polymerization (CRP) strategies, and enables the preparation of chain-end functionalized block copolymers not directly accessible using a single CRP technique.

Importance of off-cycle species in the acid-catalyzed aza-Piancatelli rearrangement.

The observed rate of reaction in the dysprosium triflate catalyzed aza-Piancatelli rearrangement is controlled by a key off-cycle binding between aniline and catalyst. Deconvoluting the role of these ancillary species greatly broadens our understanding of factors affecting the productive catalytic pathway. We demonstrate that the rate of reaction is controlled by initial competitive binding between the furylcarbinol and nitrogen nucleophile using either a Brønsted or Lewis acid catalyst and that the resulting rearrangement proceeds without involving the Brønsted and Lewis acid catalyst. This shows conclusively that the rate-controlling step and selectivity of reaction are decoupled.

Rapid and stereoselective synthesis of spirocyclic ethers via the intramolecular Piancatelli rearrangement.

The first example of a Piancatelli rearrangement of alcohols is demonstrated utilizing dysprosium(III) triflate as a catalyst to access oxaspirocycles in a highly diastereoselective manner. The cascade reaction constructs the spirocyclic ether ring system and the tertiary stereocenter in a single operation and is experimentally easy to perform.

Mechanistic investigation of the enantioselective intramolecular stetter reaction: proton transfer is the first irreversible step.

A study on the mechanism of the asymmetric intramolecular Stetter reaction is reported. This investigation includes the determination of the rate law, kinetic isotope effects, and competition experiments. The reaction was found to be first order in aldehyde and azolium catalyst or free carbene. A primary kinetic isotope effect was found for the proton of the aldehyde. Taken together with a series of competition experiments, these results suggest that proton transfer from the tetrahedral intermediate formed upon nucleophilic attack of the carbene onto the aldehyde is the first irreversible step.

The Catalytic Asymmetric Intramolecular Stetter Reaction.

This account chronicles our efforts at the development of a catalytic asymmetric Stetter reaction using chiral triazolium salts as small molecule organic catalysts. Advances in the mechanistically related azolium-catalyzed asymmetric benzoin reaction are discussed, particularly as they apply to catalyst design. A chronological treatise of reaction discovery, catalyst optimization and reactivity extension follows.

Scope of the asymmetric intramolecular stetter reaction catalyzed by chiral nucleophilic triazolinylidene carbenes.

A highly enantioselective intramolecular Stetter reaction of aromatic and aliphatic aldehydes tethered to different Michael acceptors has been developed. Two triazolium scaffolds have been identified that catalyze the intramolecular Stetter reaction with good reactivity and enantioselectivity. The substrate scope has been examined and found to be broad; both electron-rich and -poor aromatic aldehydes undergo cyclization in high yield and enantioselectivity. The tether can include oxygen, sulfur, nitrogen, and carbon linkers with no detrimental effects. In addition, the incorporation of various tethered Michael acceptors includes amides, esters, thioesters, ketones, aldehydes, and nitriles. The catalyst loading may be reduced to 3 mol % without significantly affecting the reactivity or selectivity of the reaction.