Optimization of fecal sample homogenization for untargeted metabolomics.

INTRODUCTION: Fecal samples are highly complex and heterogeneous, containing materials at various stages of digestion. The heterogeneity and complexity of feces make stool metabolomics inherently challenging. The level of homogenization influences the outcome of the study, affecting the metabolite profiles and reproducibility; however, there is no consensus on how fecal samples should be prepared to overcome the topographical discrepancy and obtain data representative of the stool as a whole. OBJECTIVES: Various combinations of homogenization conditions were compared to investigate the effects of bead size, addition of solvents and the differences between wet-frozen and lyophilized feces. METHODS: The homogenization parameters were systematically altered to evaluate the solvent usage, bead size, and whether lyophilization is required in homogenization. The metabolic coverage and reproducibility were compared among the different conditions. RESULTS: The current work revealed that a combination of mechanical and chemical lysis obtained by bead-beating with a mixture of big and small sizes of beads in an organic solvent is an effective way to homogenize fecal samples with adequate reproducibility and metabolic coverage. Lyophilization is required when bead-beating is not available. CONCLUSIONS: A comprehensive and systematical evaluation of various fecal matter homogenization conditions provides a profound understanding for the effects of different homogenization methods. Our findings would be beneficial to assist with standardization of fecal sample homogenization protocol.

Evaluation of fresh, frozen, and lyophilized fecal samples by SPME and derivatization methods using GC×GC-TOFMS.

INTRODUCTION: Feces is a highly complex matrix containing thousands of metabolites. It also contains live bacteria and enzymes, and does not have a static chemistry. Consequently, proper control of pre-analytical parameters is critical to minimize unwanted variations in the samples. However, no consensus currently exists on how fecal samples should be stored/processed prior to analysis. OBJECTIVE: The effects of sample handling conditions on fecal metabolite profiles and abundances were examined using comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC-TOFMS). METHODS: Solid-phase microextraction (SPME) and derivatization via trimethylsilylation (TMS) were employed as complementary techniques to evaluate fresh, frozen, and lyophilized fecal samples with expanded coverage of the fecal metabolome. The total number of detected peaks and the signal intensities were compared among the different handling conditions. RESULTS: Our analysis revealed that the metabolic profiles of fecal samples depend greatly on sample handling and processing conditions, which had a more pronounced effect on results obtained by SPME than by TMS derivatization. Overall, lyophilization resulted in a greater amount of total and class-specific metabolites, which may be attributed to cell lysis and/or membrane disintegration. CONCLUSIONS: A comprehensive comparison of the sample handling conditions provides a deeper understanding of the physicochemical changes that occur within the samples during freezing and lyophilization. Based on our results, snap-freezing at -80 °C would be preferred over lyophilization for handling samples in the field of fecal metabolomics as this imparts the least change from the fresh condition.

A novel chemical lysis method for maximum release of DNA from difficult-to-lyse bacteria.

Molecular detection of microorganisms requires releasing DNA from cells. However, since certain microbial organisms are refractory to lysis by chemical or enzymatic methods, mechanical lysis by bead-beating is typically employed to disrupt difficult-to-lyse microbes. A newly developed chemical lysis method called sporeLYSE enables release of DNA from difficult-to-lyse microbes without bead-beating. The sporeLYSE method was compared to bead-beating and an alkaline/detergent lysis solution for releasing DNA from microbes grown in vitro, including surrogates of Category A bioterrorism agents. sporeLYSE released 83% to 100% of DNA from Mycobacterium smegmatis, Francisella philomiragia, Yersinia enterocolitica, Bacillus thuringiensis, Pseudomonas aeruginosa, Moraxella catarrhalis and Klebsiella pneumoniae. qPCR results indicated that sporeLYSE extracted an equal or greater amount of DNA than either bead-beating or alkaline/detergent lysis from Gram-positive and Gram-negative bacteria. When sporeLYSE was used to extract DNA from saliva and sputum spiked with M. smegmatis and M. tuberculosis, respectively, the qPCR Ct values were 4-8 cycles lower than those for extractions via alkaline/detergent lysis and heat. Mean Ct values for sporesLYSE extractions from spores of Clostridium difficile and C. botulinum were approximately two cycles lower than those of MagNA Pure DNA extractions. Our results suggest that sporeLYSE is an easy-to-use liquid reagent that can efficiently release large amounts of DNA from a variety of bacteria, including spores.

A method for assessing efficiency of bacterial cell disruption and DNA release.

BACKGROUND: DNA-based testing is becoming the preferred method both for identifying microorganisms and for characterizing microbial communities. However, no single DNA extraction method exists that is suitable for all types of microorganisms because bacteria are variable in their susceptibility to lysis by available extraction procedures. To develop and test new DNA extraction procedures, it would be helpful to determine their efficiencies. While the amount of extracted DNA can readily be measured by different methods, calculation of true efficiency requires knowledge of the initial amount of DNA in the starting bacterial sample, which cannot be done with precision by any existing method. In the process of developing a new extraction procedure, we developed a method that can be used to determine the total amount of both DNA and RNA in bacteria. The amount of DNA can be calculated from the amount of purines released after mild acid and alkali treatment. The amount of RNA in the same extract can also be calculated from the amount of ribonucleoside monophosphates. The released purines and ribonucleoside monophosphates can be quantified by absorbance using HPLC, with reference to appropriate standards. RESULTS: The acid/HPLC method was used to measure the efficiency of commonly used bead-beating and chemical protocols for releasing DNA from a particularly hardy organism, Mycobacterium smegmatis as well as several other species (Bacillus subtilis vegetative cells and spores; Francisella philomiragia; Pseudomonas aeruginosa; Moraxella catarrhalis; Bacillus thuringiensis; Staphylococcus aureus). Surprisingly large differences in efficiency between methods were found. CONCLUSIONS: The acid/HPLC method is a new tool to determine DNA extraction efficiencies and should aid in the development of improved protocols for releasing DNA from a broad range of microorganisms.

The biochemical properties of the Francisella pathogenicity island (FPI)-encoded proteins IglA, IglB, IglC, PdpB and DotU suggest roles in type VI secretion.

The Francisella pathogenicity island (FPI) encodes proteins thought to compose a type VI secretion system (T6SS) that is required for the intracellular growth of Francisella novicida. In this work we used deletion mutagenesis and genetic complementation to determine that the intracellular growth of F. novicida was dependent on 14 of the 18 genes in the FPI. The products of the iglABCD operon were localized by the biochemical fractionation of F. novicida, and Francisella tularensis LVS. Sucrose gradient separation of water-insoluble material showed that the FPI-encoded proteins IglA, IglB and IglC were found in multiple fractions, especially in a fraction that did not correspond to a known membrane fraction. We interpreted these data to suggest that IglA, IglB and IglC are part of a macromolecular structure. Analysis of published structural data suggested that IglC is an analogue of Hcp, which is thought to form long nano-tubes. Thus the fractionation properties of IglA, IglB and IglC are consistent with the current model of the T6SS apparatus, which supposes that IglA and IglB homologues form an outer tube structure that surrounds an inner tube composed of Hcp (IglC) subunits. Fractionation of F. novicida expressing FLAG-tagged DotU (IcmH homologue) and PdpB (IcmF homologue) showed that these proteins localize to the inner membrane. Deletion of dotU led to the cleavage of PdpB, suggesting an interaction of these two proteins that is consistent with results obtained with other T6SSs. Our results may provide a mechanistic basis for many of the studies that have examined the virulence properties of Francisella mutants in FPI genes, namely that the observed phenotypes of the mutants are the result of the disruption of the FPI-encoded T6SS structure.

The Francisella pathogenicity island protein PdpD is required for full virulence and associates with homologues of the type VI secretion system.

Francisella tularensis is a highly infectious, facultative intracellular bacterial pathogen that is the causative agent of tularemia. Nearly a century ago, researchers observed that tularemia was often fatal in North America but almost never fatal in Europe and Asia. The chromosomes of F. tularensis strains carry two identical copies of the Francisella pathogenicity island (FPI), and the FPIs of North America-specific biotypes contain two genes, anmK and pdpD, that are not found in biotypes that are distributed over the entire Northern Hemisphere. In this work, we studied the contribution of anmK and pdpD to virulence by using F. novicida, which is very closely related to F. tularensis but which carries only one copy of the FPI. We showed that anmK and pdpD are necessary for full virulence but not for intracellular growth. This is in sharp contrast to most other FPI genes that have been studied to date, which are required for intracellular growth. We also showed that PdpD is localized to the outer membrane. Further, overexpression of PdpD affects the cellular distribution of FPI-encoded proteins IglA, IglB, and IglC. Finally, deletions of FPI genes encoding proteins that are homologues of known components of type VI secretion systems abolished the altered distribution of IglC and the outer membrane localization of PdpD.

Genetic elements for selection, deletion mutagenesis and complementation in Francisella spp.

Francisella novicida is a gram-negative pathogen that can induce disease in mice that mimics human tularemia, and is nearly identical to Francisella tularensis at the genomic level. In this work a number of antibiotic marker cassettes that incorporate a strong F. novicida promoter is constructed, which greatly enhances selection in F. novicida and F. tularensis. Two low-copy plasmid vectors based on a broad-host-range plasmid, and an integrating vector have also been made, and these can be used for genetic complementation. Two general approaches to deletion mutagenesis in F. novicida is also described.

The Francisella pathogenicity island protein IglA localizes to the bacterial cytoplasm and is needed for intracellular growth.

BACKGROUND: Francisella tularensis is a gram negative, facultative intracellular bacterium that is the etiological agent of tularemia. F. novicida is closely related to F. tularensis but has low virulence for humans while being highly virulent in mice. IglA is a 21 kDa protein encoded by a gene that is part of an iglABCD operon located on the Francisella pathogenicity island (FPI). RESULTS: Bioinformatics analysis of the FPI suggests that IglA and IglB are components of a newly described type VI secretion system. In this study, we showed that IglA regulation is controlled by the global regulators MglA and MglB. During intracellular growth IglA production reaches a maximum at about 10 hours post infection. Biochemical fractionation showed that IglA is a soluble cytoplasmic protein and immunoprecipitation experiments demonstrate that it interacts with the downstream-encoded IglB. When the iglB gene was disrupted IglA could not be detected in cell extracts of F. novicida, although IglC could be detected. We further demonstrated that IglA is needed for intracellular growth of F. novicida. A non-polar iglA deletion mutant was defective for growth in mouse macrophage-like cells, and in cis complementation largely restored the wild type macrophage growth phenotype. CONCLUSION: The results of this study demonstrate that IglA and IglB are interacting cytoplasmic proteins that are required for intramacrophage growth. The significance of the interaction may be to secrete effector molecules that affect host cell processes.