Exposure to carbonyl compounds in charcoal production plants in Bahia, Brazil.

Studies have investigated the exposure levels of carbonyl compounds (CC) in the indoor and outdoor air of homes, vehicles, workplaces, urban and industrial areas, and rural sites. However, an investigation of these emissions and occupational exposure to CC in charcoal production facilities has not been previously conducted. The objective of this study was to measure the atmospheric concentrations of several CC to assess the exposure of workers of two charcoal plants located north of Salvador, Bahia, Brazil. Stationary and personal samples were collected using Sep-Pak® C18 cartridges that were coated with a 0.2 % acidic solution of 2,4-dinitrophenylhydrazine. The quantification of the resulting 2,4-dinitrophenylhydrazone derivatives was conducted using a high-performance liquid chromatography system with UV detection. In the personal samples, the concentrations of formaldehyde, acetaldehyde, propanone, furfural, and C4 isomers (n-butanal-isobutanal-butanone) ranged from 12 to 139, 38 to 165, 136 to 483, 39 to 114, and 63 to 132 µg m(-3), respectively. In the stationary samples, the concentrations of these CC ranged from 20 to 160, 111 to 284, 328 to 644, 70 to 163, and 100 to 176 µg m(-3), respectively. When compared to the occupational exposure limits for 8 h, the concentrations of formaldehyde were often greater than the levels recommended by the American National Institute for Occupational Safety and Health, which indicates a health risk for charcoal workers. These results are the first reported concerning the occupational exposure to CC in charcoal plants.

Determination of carbonyl compounds in the atmosphere of charcoal plants by HPLC and UV detection.

A chromatographic quantification method with two different mobile phases (elution conditions 1 and 2) was developed to determine carbonyl compounds (CCs) in air samples collected from charcoal production workplaces, using C18 cartridges coated with 2,4-dinitrophenylhydrazine (DNPHi). Several 2,4-dinitrophenylhydrazones (DNPHo) were separated and quantified using an HPLC system and UV detection. In 16 min, elution condition 1 successfully separated and quantified the DNPHo of 14 CC including acetaldehyde, acrolein, formaldehyde, and furfural, and estimated the sum of C4 isomers, butanal-isobutanal-butanone. This elution condition was able to resolve the pairs acrolein/furfural and propanone/propanal, which have been cited in the literature as difficult mixtures to be separated. The elution condition 2 allowed separation and quantification, in less than 30 min, of 13 out of the 17 CC listed above. This elution condition was also able to separate propanone from propanal and butanone from the other components of the C4 mixture. When the two mobile phases were used together, they allowed confirmation of the presence of the DNPHo in the real samples. Thus, both elution conditions have been shown to be appropriate to determine CC, in personal and stationary samples, collected in charcoal production plants.