Influence of exposure time on the release of bacteria from a biofilm on Ti6Al4V discs using sonication: An in vitro model.

Implant sonication is considered a useful method for the diagnosis of implant-related infections. We designed an in vitro study using Ti6Al4V discs and 5 different bacteria to determine the optimal sonication time for recovery of most bacteria tested to enable use of sonication in clinical practice for microbiological diagnosis of implant-related infections. We carried out a specific protocol for the adherence and subsequent biofilm formation on the materials used. The discs were then sonicated and the retrieved bacteria were quantified. From minute 1 to 5, the amount of recovered organisms grew progressively for all bacteria. Between minute 6 and minute 10, the number was irregular for all strains except E. coli, though no pattern was evidenced. E. coli was the only microorganism with a progressive increase in liberation throughout the process. Significant differences were observed in each of the 10minutes analyzed as concerns the release of the 5 strains (P<0.021) as well as in the mean dislodgement (of the 10minutes) of all tested strains (P<0.00001). Considering that infections in which biofilms are involved could be polymicrobial, we concluded that 5minutes is the optimal time of sonication in order to recover the maximum amount of most bacteria attached to Ti6Al4V discs.

Doped TiO2 anodic layers of enhanced antibacterial properties.

Ti-6Al-4V joint replacement implants foster uncemented fixation in orthopaedic surgery. However, bacterial colonization competes with host cells and ultimately may produce implant-related difficult-to-treat infections, justifying the efforts to obtain infection-resistant materials. In a previous work, the authors demonstrated the antibacterial properties of anodic fluoride-TiO2 nanostructured layers on Ti-6Al-4V alloy. In this work, the anodizing bath has been modified in order to grow fluoride-TiO2 barrier layers (FBL). A bacterial adherence protocol, run with reference and six different clinical strains of Staphylococcus aureus and Staphylococcus epidermidis, showed a statistically significant decrease in the percentage of covered surface (p<0.0001, Kruskal-Wallis test) for FBL specimens when compared with non fluoride-containing specimens, i.e. chemically polished Ti-6Al-4V and F-free TiO2 barrier layers. The results obtained on the F-barrier layers allowed discrimination between the effects of the presence of fluoride in the layer and the layer nanostructure on bacterial adhesion.

Microstructural and Wear Behavior Characterization of Porous Layers Produced by Pulsed Laser Irradiation in Glass-Ceramics Substrates.

In this work, wear behavior and microstructural characterization of porous layers produced in glass-ceramic substrates by pulsed laser irradiation in the nanosecond range are studied under unidirectional sliding conditions against AISI316 and corundum counterbodies. Depending on the optical configuration of the laser beam and on the working parameters, the local temperature and pressure applied over the interaction zone can generate a porous glass-ceramic layer. Material transference from the ball to the porous glass-ceramic layer was observed in the wear tests carried out against the AISI316 ball counterface whereas, in the case of the corundum ball, the wear volume loss was concentrated in the porous layer. Wear rate and friction coefficient presented higher values than expected for dense glass-ceramics.

In vitro assessment of Staphylococcus epidermidis and Staphylococcus aureus adhesion on TiO2 nanotubes on Ti-6Al-4V alloy.

The aim of this study was to evaluate Staphylococcus sp. adhesion to modified surfaces of titanium alloy (Ti-6Al-4V). Specimens of Ti-6Al-4V alloy 6-4 ELI-grade 23 that meets the requirements of ASTM F136 2002A (AMS 2631B class A1) were anodized in a mixture of sulfuric/hydrofluoric acid at 20 V for 5 and 60 min to form nanoporous (NP) and nanotubular (NT) oxide layers with pore diameter of 20 and 100 nm, respectively. The amount of fluorine incorporated in the oxide films from the electrolyte was 6 and 4 wt %, respectively. Bacterial adherence was studied using laboratory strains and six clinical strains each of Staphylococcus aureus and Staphylococcus epidermidis. Lower adherence of laboratory strains was demonstrated on fluoride nanostructured surfaces in comparison with the fluoride-free surfaces. Significant differences between clinical strains and laboratory strains were also found (p < 0.0001, Kruskal-Wallis test) when NP and NT specimens were compared with chemically polished (CP) surfaces. The results of the tests using multiple clinical strains confirmed a decrease in bacterial adherence on F-containing titanium oxide surfaces, suggesting a potential applicability of this surface, with a confirmed added value of decreasing clinical staphylococci adherence, for medical prosthetic devices.