Exploring the favorable ion-exchange ability of phthalylated cellulose biopolymer using thermodynamic data.

A phthalylated ion-exchange biopolymer was obtained by adding cellulose to molten phthalic anhydride in a quasi solvent-free procedure. Through this route 2.99+/-0.07 mmolg(-1) of pendant groups containing ester and carboxylic acid moieties were incorporated into the polymeric structure that was characterized by elemental analysis, solid-state carbon nuclear magnetic resonance (CP/MAS), infrared spectroscopy, X-ray diffraction, and thermogravimetry. The chemically modified polysaccharide is able to exchange cations from aqueous solution as demonstrated by batchwise methodology. The data were adjusted to a modified Langmuir equation to give 2.43+/-0.12 and 2.26+/-0.11 mmolg(-1) for divalent cobalt and nickel cations, respectively. The net thermal effects obtained from calorimetric titration measurements were also adjusted to a modified Langmuir equation, and the enthalpy of the interaction was calculated to give endothermic values of 2.11+/-0.28 and 2.50+/-0.31kJmol(-1) for these cations, respectively. The spontaneity of this ion-exchange process is reflected in negative Gibbs energy and with a contribution of positive entropic values. This set of thermodynamic data at the solid-liquid interface suggests a favorable ion-exchange process for this anchored biopolymer for cation exchange from the environment.

Cation removal using cellulose chemically modified by a Schiff base procedure applying green principles.

Pentane-2,4-dione (acetylacetone) molecules were covalently incorporated under several different conditions to ethylene-1,2-diamine (en)-modified cellulose, using polar solvents or without solvents. The quantitative amount of en incorporated was given from 0.37+/-0.01 to 3.03+/-0.01 mmol of nitrogen per gram of cellulose, depending on the synthetic routes and after Schiff base formation this percentage was reduced by 1.38-6.12%. The synthetic routes indicated that lower solvent volumes produced higher amounts of en incorporation. However, the highest degree of pendant groups on the polymeric cellulose structure was obtained from a solvent-free reaction route. This procedure was applied for synthesizing all Schiff bases, causing a decrease in the amount of nitrogen. The available basic centers on the best covalently bonded biopolymer were investigated for adsorption of divalent copper, cobalt, nickel, and zinc from aqueous solution, with a capacity order of Cu2+ > Co2+ > Ni2+ > Zn2+.

Kinetics and thermodynamics of textile dye adsorption from aqueous solutions using babassu coconut mesocarp.

Extracted babassu coconut (Orbignya speciosa) mesocarp (BCM) was applied as a biosorbent for aqueous Blue Remazol R160 (BR 160), Rubi S2G (R S2G), Red Remazol 5R (RR 5), Violet Remazol 5R (VR 5) and Indanthrene Olive Green (IOG) dye solutions. The natural sorbent was processed batchwise while varying several system parameters such as stirring time, pH and temperature. The interactions were assayed with respect to both pseudo-first-order and second-order reaction kinetics, with the latter the more suitable kinetic model. The maximum adsorption was obtained at pH 1.0 for all dyes due to available anionic groups attached to the structures, which can be justified by pH(pzc) 6.7 for the biosorbent BCM. The ability of babassu coconut mesocarp to adsorb dyes gave the order R S2G>VR 5>BR 160>IOG>RR 5, which data were best fit to Freundlich model, but did not well-adjusted for all dyes. The dye/biopolymer interactions at the solid/liquid interface are all spontaneous as given by free Gibbs energy, with exothermic enthalpic values of -26.1, -15.8, -17.8, -15.8 and -23.7 kJ mol(-1) for BR 160, R S2G, RR 5, IOG and VR 5, respectively. In spite of the negative entropic values contribution, the set of thermodynamic data is favorable for all dyes removal. However, the results pointed to the effectiveness of the mesocarp of babassu coconut as a biosorbent for removing textile dyes from aqueous solutions.

Preparation of ethylenediamine-anchored cellulose and determination of thermochemical data for the interaction between cations and basic centers at the solid/liquid interface.

Cellulose was first modified with thionyl chloride, giving 99% substitution at C6, and then reacted with ethylene-1,2-diamine to produce 6-(2'-aminoethylamino)-6-deoxy-cellulose. From the 8.5% of nitrogen incorporated in the polysaccharide backbone, the amount of ethylene-1,2-diamine anchored per gram of modified cellulose was determined to be 3.03+/-0.01mmol. This chemically immobilized surface was characterized by FTIR, TG, (13)C NMR, and SEM techniques. The available basic nitrogen centers covalently bonded to the biopolymer skeleton were studied for copper, cobalt, nickel, and zinc adsorption from aqueous solutions and the respective thermal adsorption effects were determined by calorimetric titration. The ability to adsorb cations gave a capacity order of Co(2+)>Cu(2+)>Zn(2+)>Ni(2+) with affinities of 1.91+/-0.07, 1.32+/-0.07, 1.31+/-0.02, and 1.08+/-0.04mmol/g, respectively. The net thermal effects obtained from calorimetric titration measurements were adjusted to a modified Langmuir equation and the enthalpy of the interaction was calculated to give the following exothermic values: -20.8+/-0.05, -11.72+/-0.03, -7.32+/-0.01, and -6.27+/-0.02kJ/mol for Co(2+), Cu(2+), Zn(2+), and Ni(2+), respectively. With the exception of the entropic value for copper, the other thermodynamic data for these systems are favorable for cation adsorption from aqueous solutions at the solid/liquid interface, suggesting the use of this anchored biopolymer for cation removal from the environment.