Characterization of residual oils for biodiesel production

Background: Residual oils were characterized according to their physicochemical properties, i.e. acidity, iodine value, peroxide value and saponification number, to evaluate the degradation level and viability for biodiesel production. Results: The methyl esters of fatty acids (FAME) from samples of residual bovine, chicken and soybean oils were quantified by using four transesterification methods, using acidic and basic catalysis and, gas chromatography with flame ionization detector (GC-FID). Methods that used acidic catalysis at a lower temperature were the most efficient. Methyl biodiesel samples were synthesized by basic catalysis (KOH) for all quantified oils and the physicochemical properties of the biofuel were evaluated, i.e. viscosity, flash and fire points, density, water content, iodine and acidity numbers. Conclusions: The obtained results suggesting that it is possible to take advantage of these residues for biodiesel production as the obtained products were approved according to the rules established by the National Association of Petroleum (ANP); the bovine samples were the exception regarding moisture and acidity.

Optimization of the selectivity of a cyanopropyl stationary phase for the gas chromatographic analysis of trans fatty acids.

The quantification of monounsaturated and polyunsaturated trans fatty acids in partially hydrogenated fats by gas-liquid chromatography on a CP-Select CB-FAME capillary column was optimized using equivalent chain length values of fatty acids methyl esters that could coelute in the temperature range from 155 to 200 degrees C. The most appropriate temperature for the simultaneous determination of these trans isomers is around 197 degrees C. It is proposed a system to discriminate trans from cis octadecenoic fatty acid methyl esters based on the angular coefficient values of the equivalent chain length curves. The limits of detection and quantification were 0.28 and 0.93 mg g(-1). Quantification was performed in the range from 0.93 to 280 mg g(-1). Quantification accuracy was estimated by spike recovery of elaidic and trans-13-octadecenoic acids in hydrogenated fat samples. The obtained levels were from 97.60 to 103.28% for elaidic acid and from 98.12 to 99.27% for trans-13-octadecenoic acid. These results indicate that the accuracy of the methodology proposed for the quantification of monounsaturated and polyunsaturated trans fatty acids in hydrogenated fats is adequate.

Trans polyunsaturated fatty acid contents in Brazilian refined soybean oil.

This study examined the concentration (mg/g) of trans polyunsaturated fatty acid (TPFA) in five soybean oil brands by gas-liquid chromatography. Tricosanoic acid methyl ester was used as the internal standard. All samples analyzed presented trans 18:2 fatty and trans 18:3 acids in detectable amounts. The concentration of TPFA ranged from 5.8 to 30.2 mg/g, with a mean concentration value of 18.4 mg/g. Trans 18:3 fatty acids had the highest TPFA group concentrations, which ranged from 3.9 to 16.3 mg/g. The main isomer of this group presented the 9c, 12c, 15t configuration. For trans 18:2 fatty acids, concentrations ranged from 1.9 to 14.0 mg/g with a mean value of 8.1 mg/g. Alpha-linolenic acid (all cis) concentrations ranged from 30.7 to 60.6 mg/g and their degree of isomerization ranged from 6.0 to 31.5, indicating that the deodorization process varies from one producer to another. From per capita consumption of soybean oil brands in Brazil and their TPFA concentrations, it is possible to conclude that their contribution to the average TPFA intake per person in Brazil is 0.4 g/d.