Utilization of shea butter waste-derived hierarchical activated carbon for high-performance supercapacitor applications.

In this work, carbonization and subsequent activation procedures were adopted to synthesize waste shea butter shells into oxygen-rich interconnected porous activated carbon (SAC_x, x is the mass ratio of KOH used for activation). The SAC_1.5 electrode material showed outstanding electrochemical performance with high specific capacitance (286.6F/g) and improved rate capability, owing to various synergistic effects originating from a high specific surface area (1233.5 m2/g) and O-rich content. The SAC_1.5-based symmetric device delivered an impressive specific capacitance of 91.6F/g with a high energy density of 12.7 Wh/kg at 0.5 A/g. The device recorded 99.9 % capacitance retention after 10,000 charge-discharge cycles. The symmetric supercapacitor device successfully lit an LED bulb for more than 1 h, signifying the potential of bio-waste as an efficient carbon precursor for electrode material in practical supercapacitors. This work offers an efficient, affordable, and environmentally friendly strategy for potential renewable energy storage devices.

Imaging Review of Different Subchondral Insufficiency Fractures.

ABSTRACT: Subchondral fractures are a common cause of joint pain that may ultimately lead to articular collapse and the need for arthroplasty. This type of fracture has been reported at multiple joints throughout the body. While clinical and radiographic resolution can be achieved, progressive bone collapse can occur and lead to a variety of complications. Understanding the pertinent imaging findings can aid in the early evaluation of subchondral fractures and in the prevention of their associated complications.

Bacteria for Bioplastics: Progress, Applications, and Challenges.

Bioplastics are one of the answers that can point society toward a sustainable future. Under this premise, the synthesis of polymers with competitive properties using low-cost starting materials is a highly desired factor in the industry. Also, tackling environmental issues such as nonbiodegradable waste generation, high carbon footprint, and consumption of nonrenewable resources are some of the current concerns worldwide. The scientific community has been placing efforts into the biosynthesis of polymers using bacteria and other microbes. These microorganisms can be convenient reactors to consume food and agricultural wastes and convert them into biopolymers with inherently attractive properties such as biodegradability, biocompatibility, and appreciable mechanical and chemical properties. Such biopolymers can be applied to several fields such as packing, cosmetics, pharmaceutical, medical, biomedical, and agricultural. Thus, intending to elucidate the science of microbes to produce polymers, this review starts with a brief introduction to bioplastics by describing their importance and the methods for their production. The second section dives into the importance of bacteria regarding the biochemical routes for the synthesis of polymers along with their advantages and disadvantages. The third section covers some of the main parameters that influence biopolymers' production. Some of the main applications of biopolymers along with a comparison between the polymers obtained from microorganisms and the petrochemical-based ones are presented. Finally, some discussion about the future aspects and main challenges in this field is provided to elucidate the main issues that should be tackled for the wide application of microorganisms for the preparation of bioplastics.

Mitochondrial variants of complex I genes associated with leprosy clinical subtypes.

Leprosy is a chronic bacterial infection mainly caused by Mycobacterium leprae that primarily affects skin and peripheral nerves. Due to its ability to absorb carbon from the host cell, the bacillus became dependent on energy production, mainly through oxidative phosphorylation. In fact, variations in genes of Complex I of oxidative phosphorylation encoded by mtDNA have been associated with several diseases in humans, including bacterial infections, which are possible influencers in the host response to leprosy. Here, we investigated the presence of variants in the mtDNA genes encoding Complex I regarding leprosy, as well as the analysis of their pathogenicity in the studied cohort. We found an association of 74 mitochondrial variants with either of the polar forms, Pole T (Borderline Tuberculoid) or Pole L (Borderline Lepromatous and Lepromatous) of leprosy. Notably, six variants were exclusively found in both clinical poles of leprosy, including m.4158A>G and m.4248T>C in MT-ND1, m.13650C>A, m.13674T>C, m.12705C>T and m.13263A>G in MT-ND5, of which there are no previous reports in the global literature. Our observations reveal a substantial number of mutations among different groups of leprosy, highlighting a diverse range of consequences associated with mutations in genes across these groups. Furthermore, we suggest that the six specific variants exclusively identified in the case group could potentially play a crucial role in leprosy susceptibility and its clinical differentiation. These variants are believed to contribute to the instability and dysregulation of oxidative phosphorylation during the infection, further emphasizing their significance.

Study of Soybean Oil-Based Non-Isocyanate Polyurethane Films via a Solvent and Catalyst-Free Approach.

Synthesizing polymeric materials that are both sustainable and practical has become a priority. Polyurethanes (PUs) are becoming more popular because of their countless applications and exclusive properties in many sectors. While considering the current issue of environmental problems and the excessive use of petroleum products, nonisocyanate PU (NIPU) are favored due to their sustainability and low toxicity compared to conventional PU. In this work, flexible NIPU films were made using a green and facile method. For that, soybean oil (SBO) was used as the starting material and converted into epoxide SBO, followed by its chemical conversion into carbonated SBO (CSBO) using carbon dioxide gas. Following that, the CSBO reacted with three different aliphatic amines, namely, 1,2-ethylenediamine, 1,4-butylenediamine, and 1,6-hexamethylenediamine, in a solventless and catalyst-free system. The films were cast and cured at 85 °C for different curing times. The effects of the aliphatic diamines and curing times on the NIPU films were evaluated. The individual materials were confirmed with Fourier transform infrared, 1H nuclear magnetic resonance, and gel permeation chromatography. To analyze the thermal and mechanical properties, thermogravimetric analysis, dynamic mechanical analysis, and differential scanning calorimetry were performed. Furthermore, mechanical tests such as hardness and tensile strength were also performed along with the degree of swelling, gel content, and contact angle by using several solvents. This study elucidated the structure-property relationship based on the effect of curing time and aliphatic chain size of diamines in the properties of a NIPU film. The satisfactory thermal and mechanical properties, accompanied by a green and facile approach, displayed the potential scalability of the NIPU films.

Optimum iron-pyrophosphate electronic coupling to improve electrochemical water splitting and charge storage.

Tuning the electronic properties of transition metals using pyrophosphate (P2O7) ligand moieties can be a promising approach to improving the electrochemical performance of water electrolyzers and supercapacitors, although such a material's configuration is rarely exposed. Herein, we grow NiP2O7, CoP2O7, and FeP2O7 nanoparticles on conductive Ni-foam using a hydrothermal procedure. The results indicated that, among all the prepared samples, FeP2O7 exhibited outstanding oxygen evolution reaction and hydrogen evolution reaction with the least overpotential of 220 and 241 mV to draw a current density of 10 mA/cm2. Theoretical studies indicate that the optimal electronic coupling of the Fe site with pyrophosphate enhances the overall electronic properties of FeP2O7, thereby enhancing its electrochemical performance in water splitting. Further investigation of these materials found that NiP2O7 had the highest specific capacitance and remarkable cycle stability due to its high crystallinity as compared to FeP2O7, having a higher percentage composition of Ni on the Ni-foam, which allows more Ni to convert into its oxidation states and come back to its original oxidation state during supercapacitor testing. This work shows how to use pyrophosphate moieties to fabricate non-noble metal-based electrode materials to achieve good performance in electrocatalytic splitting water and supercapacitors.

Eco-friendly mixed metal (Mg-Ni) ferrite nanosheets for efficient electrocatalytic water splitting.

Eco-friendly and cost-effective catalysts with multiple active sites, large surface area, high stability and catalytic activity are highly desired for efficient water splitting as a sustainable green energy source. Within this line, a facile synthetic approach based on solventless thermolysis was employed for the simple and tunable synthesis of Ni1-xMgxFe2O4 (0 ≤ x ≤ 1) nanosheets. The characterization of nanosheets (via p-XRD, EDX, SEM, TEM, HRTEM, and SAED) revealed that the pristine ferrites (NiFe2O4 and MgFe2O4), and their solid solutions maintain the same cubic symmetry throughout the composition regulation. Elucidation of the electrochemical performance of the nanoferrite solid solutions showed that by tuning the local chemical environment of Ni in NiFe2O4 via Mg substitution, the intrinsic catalytic activity was enhanced. Evidently, the optimized Ni0.4Mg0.6Fe2O4 catalyst showed drastically enhanced HER activity with a much lower overpotential of 121 mV compared to the pristine NiFe2O4 catalyst. Moreover, Ni0.2Mg0.8Fe2O4 catalyst exhibited the best OER performance with a low overpotential of 284 mV at 10 mA/cm2 in 1 M KOH. This enhanced electrocatalytic activity could be due to improved electronic conductivity caused by the partial substitution of Ni2+ by Mg2+ in the NiFe2O4 matrix as well as the synergistic effect in the Mg-substituted NiFe2O4. Our results suggest a feasible route for developing earth-abundant metal oxide-based electrocatalysts for future water electrolysis applications.

Whole mitogenome sequencing uncovers a relation between mitochondrial heteroplasmy and leprosy severity.

BACKGROUND: In recent years, the mitochondria/immune system interaction has been proposed, so that variants of mitochondrial genome and levels of heteroplasmy might deregulate important metabolic processes in fighting infections, such as leprosy. METHODS: We sequenced the whole mitochondrial genome to investigate variants and heteroplasmy levels, considering patients with different clinical forms of leprosy and household contacts. After sequencing, a specific pipeline was used for preparation and bioinformatics analysis to select heteroplasmic variants. RESULTS: We found 116 variants in at least two of the subtypes of the case group (Borderline Tuberculoid, Borderline Lepromatous, Lepromatous), suggesting a possible clinical significance to these variants. Notably, 15 variants were exclusively found in these three clinical forms, of which five variants stand out for being missense (m.3791T > C in MT-ND1, m.5317C > A in MT-ND2, m.8545G > A in MT-ATP8, m.9044T > C in MT-ATP6 and m.15837T > C in MT-CYB). In addition, we found 26 variants shared only by leprosy poles, of which two are characterized as missense (m.4248T > C in MT-ND1 and m.8027G > A in MT-CO2). CONCLUSION: We found a significant number of variants and heteroplasmy levels in the leprosy patients from our cohort, as well as six genes that may influence leprosy susceptibility, suggesting for the first time that the mitogenome might be involved with the leprosy process, distinction of clinical forms and severity. Thus, future studies are needed to help understand the genetic consequences of these variants.

ncRNAs: an unexplored cellular defense mechanism in leprosy.

Leprosy is an infectious disease primarily caused by the obligate intracellular parasite Mycobacterium leprae. Although it has been considered eradicated in many countries, leprosy continues to be a health issue in developing nations. Besides the social stigma associated with it, individuals affected by leprosy may experience nerve damage leading to physical disabilities if the disease is not properly treated or early diagnosed. Leprosy is recognized as a complex disease wherein socioenvironmental factors, immune response, and host genetics interact to contribute to its development. Recently, a new field of study called epigenetics has emerged, revealing that the immune response and other mechanisms related to infectious diseases can be influenced by noncoding RNAs. This review aims to summarize the significant advancements concerning non-coding RNAs in leprosy, discussing the key perspectives on this novel approach to comprehending the pathophysiology of the disease and identifying molecular markers. In our view, investigations on non-coding RNAs in leprosy hold promise and warrant increased attention from researches in this field.

Hand and finger, ultrasound-guided, percutaneous core needle biopsies: A safe procedure with high diagnostic accuracy.

Introduction/Purpose: To determine the diagnostic accuracy and complication rates of ultrasound-guided, percutaneous core needle biopsies of soft tissue masses in the hand and fingers. Methods: Reports from all ultrasound-guided procedures between 21 May 2014 and 17 March 2022 were queried for keywords including "hand", OR "finger", AND "biopsy". Patient demographics, lesion size and location, biopsy needle gauge and the number of cores obtained were recorded. The final pathology of the mass excision was then compared with the core needle biopsy (CNB) for each patient. Results: Sixty-six records were reviewed, and 37 patients met inclusion criteria. Maximum lesion diameter averaged 1.45 cm with a range between 0.4 and 4.3 cm. The frequency of needle gauges used was 14G (14%), 16G (24%), 18G (38%), 20G (11%) and 'not reported' (14%). The mean number of tissue cores obtained was 2.9 (SD 1.2; range 1 to 6), excluding nine cases that reported 'multiple'. The frequency of CNB diagnoses included tenosynovial giant cell tumour (TGCT) at 30%, ganglion cyst at 11% and epidermal inclusion cyst at 5%. CNB was 100% sensitive in detecting the three (8%) malignancies. Of the 37 tumours biopsied, 16 were surgically excised. One angiomyoma was originally diagnosed as a haemangioma on CNB, but all other histologic results were concordant for a diagnostic accuracy of 97%. Discussion: Small soft tissue masses in the hands and fingers, even those less than 1 cm, are often amenable to ultrasound-guided CNB. Performance under image guidance facilitates retrieval of core specimens adquate for histologic diagnosis with relatively few passes using higher gauge needles. Conclusion: Overall, ultrasound-guided CNB of the hand and fingers is safe and highly accurate in diagnosing soft tissue tumours. The accuracy is unrelated to the needle's gauge, the number of passes and the size of the lesions.

Unusual lipid poor spindle cell lipoma.

Spindle cell lipomas (SCLs) containing minimal fat are rare and can be diagnostically challenging due to their similar radiographic appearance to other benign and malignant tumours. SCLs are benign lipomatous tumours that typically occur in middle aged to elderly men as slow-growing, painless masses in the subcutaneous tissue of the posterior neck, shoulders or back. However, rarely these tumours can arise in unusual locations such as the lower extremities. We present an unusual case of a lipid poor SCL occurring in the lower extremity. Initial clinical and radiographic findings were suspicious for a malignancy. Two core biopsies demonstrated benign fibro collagenous tissue, so a marginal excision was performed. Final histopathological and immunohistochemical stains confirmed the diagnosis of an SCL. Radiologists, pathologists and oncologic surgeons should be aware of this lipomatous tumour's potential to present in unusual locations with minimal fatty components to increase confidence in radiologic-pathological concordance.

Effect of an organic acid blend in Nile tilapia growth performance, immunity, gut microbiota, and resistance to challenge against francisellosis.

Organic acids (OAs) are a class of feed additives that have prophylactic and inhibitory properties against pathogenic bacteria. In this study, we investigated growth performance, innate immune response, gut microbiota, and disease resistance against Francisella orientalis F1 in Nile tilapia (Oreochromis niloticus) fed different doses of Bacti-nil®Aqua, a blend of short- and medium-chain OAs. For 21 days, 680 juvenile tilapias were fed a control diet or diets supplemented with a 0.3% (D3) or 0.5% (D5) OA blend. The feed conversion rate of fish fed the 0.5% enriched diet was considerably lower (p < 0.05) than that of the fish fed the basal diet. Lysozyme and serum bactericidal activities were significantly elevated following OA administration. After infection, no differences in the diversity and composition of gut microbiota were observed between the groups. After the bacterial challenge, the mortality was significantly lower in group D5 (p < 0.01). The diet supplemented with Bacti-nil®Aqua (Adisseo) improved the immune response and resistance of tilapia juveniles against F. orientalis infection. Thus, this OA blend could serve as a feed additive with good activity against F. orientalis.

Use of Marijuana to Promote Well-Being: Effects of Use and Prohibition in the Daily Lives of Brazilian Adults.

Background: Marijuana is the most widely used illicit drug worldwide. From an occupational perspective, its use is paradoxical in that although it can be harmful to health and has criminal consequences, it can also promote well-being. This study examined predictors of well-being to determine the effects of marijuana use and its prohibition on the daily lives of Brazilian adults. Methods: This cross-sectional study used an anonymous online questionnaire with a final sample of 2637 respondents. Utilizing logistic regression, variables were selected pertaining to use and prohibition risks, benefits of use, and harm reduction associated with the socioeconomic characteristics of the respondents. Results: Using marijuana for fun was most likely among those self-identified as male, trans/non-binary people, college graduates, and those with higher incomes. Living with family members and using less frequently proved to be protective against the adverse effect of "getting high." Indigenous peoples and youth were more likely to report trouble with the police due to marijuana use; individuals with higher education and longer use of marijuana reported more frequent use of harm reduction strategies; people who identified their color as yellow were more likely to report daily use compared to people who identified their color as white; women and people with higher income were less likely to report daily use. Conclusions: Social class, race, gender, and generation were predictors of well-being associated with marijuana use and its prohibition, indicating an interaction between different dimensions involving the use of illicit substances. Identifying the effects of the use and prohibition of marijuana in promoting well-being, from the conception of drug use as a non-sanctioned occupation, can broaden the understanding of this complex human phenomenon, with health and criminal repercussions, subsidizing the development of approaches more equitable and adequate into occupational therapy to reduce personal and social harm.

Inulin diet uncovers complex diet-microbiota-immune cell interactions remodeling the gut epithelium.

BACKGROUND: The continuous proliferation of intestinal stem cells followed by their tightly regulated differentiation to epithelial cells is essential for the maintenance of the gut epithelial barrier and its functions. How these processes are tuned by diet and gut microbiome is an important, but poorly understood question. Dietary soluble fibers, such as inulin, are known for their ability to impact the gut bacterial community and gut epithelium, and their consumption has been usually associated with health improvement in mice and humans. In this study, we tested the hypothesis that inulin consumption modifies the composition of colonic bacteria and this impacts intestinal stem cells functions, thus affecting the epithelial structure. METHODS: Mice were fed with a diet containing 5% of the insoluble fiber cellulose or the same diet enriched with an additional 10% of inulin. Using a combination of histochemistry, host cell transcriptomics, 16S microbiome analysis, germ-free, gnotobiotic, and genetically modified mouse models, we analyzed the impact of inulin intake on the colonic epithelium, intestinal bacteria, and the local immune compartment. RESULTS: We show that the consumption of inulin diet alters the colon epithelium by increasing the proliferation of intestinal stem cells, leading to deeper crypts and longer colons. This effect was dependent on the inulin-altered gut microbiota, as no modulations were observed in animals deprived of microbiota, nor in mice fed cellulose-enriched diets. We also describe the pivotal role of γδ T lymphocytes and IL-22 in this microenvironment, as the inulin diet failed to induce epithelium remodeling in mice lacking this T cell population or cytokine, highlighting their importance in the diet-microbiota-epithelium-immune system crosstalk. CONCLUSION: This study indicates that the intake of inulin affects the activity of intestinal stem cells and drives a homeostatic remodeling of the colon epithelium, an effect that requires the gut microbiota, γδ T cells, and the presence of IL-22. Our study indicates complex cross kingdom and cross cell type interactions involved in the adaptation of the colon epithelium to the luminal environment in steady state. Video Abstract.

Panorama of Intimate Partner Violence Against Women in Brazil and its Association With Self-Perception of Health: Findings From a National Representative Survey.

Intimate partner violence (IPV) is a challenge in Brazil. The country holds one of the highest rates of femicide in the world, most of which are preceded by IPV. We conducted a cross-sectional study with 34,334 women, aged 18 to 59 years, from the 2019 Brazilian National Health Survey to analyze the prevalence of IPV and its subtypes among the Brazilian adult women in the last 12 months, encompassing their health consequences and the use of health services resulting from IPV. We also used logistic regression models to estimate the association of sociodemographic characteristics and self-perceived health status with IPV. The prevalence of IPV among Brazilian adult women in the last 12 months was 7.6% (95% confidence interval [CI] [7.0, 8.2]). Women aged 18 to 39 years, not married, and with income of up to 1 minimum wage (MW), had higher odds of suffering IPV. Among those who reported health consequences due to IPV, 69% reported psychological consequences, and 13.9% sought health care, mostly in primary or secondary health care services in the Brazilian Unified Health System (41.9%). Regarding the self-perceived health variables, women who reported eating problems (odds ratio [OR] = 1.29; [1.01, 1.65]), lack of interest/absence of pleasure (OR = 1.41; [1.11, 1.79]), depressive feelings (OR = 1.39; [1.03, 1.88]), feeling of failure (OR = 1.75; [1.36, 2.24]), and suicidal thoughts (OR = 1.73; [1.25, 2.41]) had greater odds of reporting IPV compared to those who did not report these same perceptions. The results show that younger, divorced or single, low-income women with eating problems and mental health disorders were more likely to suffer IPV. IPV often led to health problems, and many abused women sought support from public health services. Health professionals must be trained to identify and care for these women, thereby acting as allies in preventing and reducing IPV.

Open reduction and internal fixation of Ideberg type IA glenoid fractures: Tricks, pearls, and potential pitfalls based on a retrospective cohort of 33 patients focusing on the rehabilitation protocol.

INTRODUCTION: The standard treatment of anterior glenaoid fractures carrying > 20% of the glenoid fossa is open reduction and internal fixation (ORIF). In the herein study, we report our outcomes in a retrospective cohort of anterior and anteroinferior glenoid rim fractures using an accelerated postoperative rehabilitation protocol. A secondary aim is to describe the surgical steps for ORIF of anterior and anteroinferior glenoid rim fractures using the anterior axillary approach, describing the tricks, pearls, and pitfalls of this surgical technique. METHODS: A retrospective cohort of skeletally mature patients treated for an anterior glenoid rim fracture carrying > 20% of the glenoid fossa during a 10-year period were operated on using a vertical axillary incision, osteosynthesis with 2.0-mm cortical screws, and labral repair with small diameter metallic anchors and non-absorbable sutures. Rehabilitation began on the first postoperative day, including passive external rotation exercises and active-assisted flexion, adduction, and abduction exercises as tolerated. The exercises are performed with the patient sitting or lying down. Phase 1 is continued for 6-10 weeks until the patient regains painless, normal, or near-normal ROM. Usually by 10 weeks, the fracture and labrum are healed, so phase 2 rehabilitation begins with strengthening and ROM exercises. Radiologic and clinical outcomes, including active range of motion (ROM), glenohumeral stability, and visual analogue scale (VAS) were measured. RESULTS: About 33 patients (35 fractures) had complete medical records and pre- and post-operative imaging exams available for further analysis regarding the surgical protocol, with a mean of 4.8 years. The mean DASH questionnaire was 3.75 ± 9.0 and the mean CM score was 62.5 ± 0.1. Active flexion and internal rotation were recovered in all patients, while external rotation presented an average loss of 8° (p = 0.12) and abduction of 5° (p = 0.33). The mean VAS was 1.1 ± 0.8. No patient reported major or disabling symptoms, or great difficulty or inability to perform daily or recreational activities. No patient presented residual instability of the glenohumeral joint. CONCLUSION: In this retrospective cohort, ORIF using a vertical axillary incision, osteosynthesis with 2.0-mm screws, and labral repair with small diameter metallic anchors and non-absorbable sutures was a safe approach, with a minimal risk of complications and residual instability. The accelerated postoperative rehabilitation protocol, allowing immediate passive external rotation of the operated shoulder, resulted in a non-significant loss of ROM compared to the contralateral side. Therefore, we recommend this management strategy for anterior glenoid rim fractures in patients with unstable shoulder joint after traumatic glenohumeral dislocation. LEVEL OF EVIDENCE IV: Therapeutic Study (Surgical technique and Retrospective cohort).

Sunflower Oil as a Renewable Resource for Polyurethane Foams: Effects of Flame-Retardants.

Currently, polyurethane (PU) manufacturers seek green alternatives for sustainable production. In this work, sunflower oil is studied as a replacement and converted to a reactive form through epoxidation and oxirane opening to produce rigid PU foams. Confirmatory tests such as Fourier-transform infrared spectroscopy (FT-IR), gel permeation chromatography (GPC), and hydroxyl value among others were performed to characterize the synthesized polyol. Despite the versatility of rigid PU foams, they are highly flammable, which makes eco-friendly flame retardants (FRs) desired. Herein, expandable graphite (EG) and dimethyl methyl phosphonate (DMMP), both non-halogenated FR, were incorporated under different concentrations to prepare rigid PU foams. Their effects on the physio-mechanical and fire-quenching properties of the sunflower oil-based PU foams were elucidated. Thermogravimetric and compression analysis showed that these foams presented appreciable compressive strength along with good thermal stability. The closed-cell contents (CCC) were around 90% for the EG-containing foams and suffered a decrease at higher concentrations of DMMP to 72%. The burning test showed a decrease in the foam's flammability as the neat foam had a burning time of 80 s whereas after the addition of 13.6 wt.% of EG and DMMP, separately, there was a decrease to 6 and 2 s, respectively. Hence, our research suggested that EG and DMMP could be a more viable alternative to halogen-based FR for PU foams. Additionally, the adoption of sunflower polyol yielded foams with results comparable to commercial ones.

Effect of Graphene Oxide and Reduced Graphene Oxide on the Properties of Sunflower Oil-Based Polyurethane Films.

Sunflower oil was used for the synthesis of a polyol via an epoxidation reaction followed by a ring-opening reaction. The successful synthesis of the sunflower oil-based polyol (SFO polyol) was demonstrated through structural characterizations and wet-chemistry analysis. Bio-based polyurethane (BPU) films were fabricated using synthesized polyol and diisocyanate. Various amounts of graphene oxide (GO) and reduced graphene oxide (rGO) were added separately to see their effect on the physicomechanical and thermal properties of BPU films. Several tests, such as thermogravimetric analysis, tensile strength, dynamic mechanical analysis, hardness, flexural strength, and the water contact angle, were performed to evaluate the effect of GO and rGO on the properties of the BPU films. Some of the analyses of the BPU films demonstrated an improvement in the mechanical properties, for example, the tensile strength increased from 22.5 to 26 MPa with the addition of only 0.05 wt.% GO. The storage modulus improved from 900 to 1000 and 1700 MPa after the addition of 0.02 and 0.05 wt.% GO, respectively. This study shows that a small amount of GO and rGO could improve the properties of BPU films, making them suitable for use in coating industries.