Screening of Commercial Organic Solvent Nanofiltration Membranes for Purification of Plastic Waste Pyrolysis Liquids.

Increasing consumption rates of plastics, combined with the waste generated from their production, leads to several environmental problems. Presently, plastic recycling takes account of only about 10% of the plastic waste, which is achieved mainly through mechanical recycling. Chemical recycling methods, such as pyrolysis, could significantly increase overall recycling rates and reduce the need for the production of fossil-based chemicals. Produced pyrolysis oil can be used for the production of benzene, toluene and xylene (BTX) through catalytic upgrading or for the production of alkanes if used directly. Separation of high-value components in pyrolysis oil derived from plastic waste through traditional separation methods can be energy intensive. Organic solvent nanofiltration has been recognised as an alternative with very low energy consumption, as separation is not based on a phase transition. This work focuses on the screening of several (semi-) commercially available membranes using a simplified model mixture of pyrolysis oil obtained from plastics. Based on membrane performance, a selection of membranes was used to treat a feedstock obtained from the direct pyrolysis of plastics. This work shows that currently, commercial OSN membranes have promising separation performance on model mixtures while showing insufficient and non-selective separation at very low flux for complex mixtures derived from the pyrolysis of plastics. This indicates that OSN is indeed a promising technology but that membranes should likely be tailored to this specific application.

Alzheimer's disease and driving: review of the literature and consensus guideline from Belgian dementia experts and the Belgian road safety institute endorsed by the Belgian Medical Association.

Alzheimer's disease (AD) is a highly prevalent condition and its prevalence is expected to further increase due to the aging of the general population. It is obvious that the diagnosis of AD has implications for driving. Finally, driving discussions are also emotionally charged because driving is associated with independence and personal identity. However, it is not clear how to implement this in clinical practice and the Belgian law on driving is rather vague in its referral to neurodegenerative brain diseases in general nor does it provide clear-cut instructions for dementia or AD compared to for example driving for patients with epilepsy and as such does not prove to be very helpful. The present article reviews what is known from both literature and existing guidelines and proposes a consensus recommendation tailored to the Belgian situation agreed by both AD experts and the Belgian Road Safety Institute endorsed by the Belgian Medical Association. It is concluded that the decision about driving fitness should be considered as a dynamic process where the driving fitness is assessed and discussed early after diagnosis and closely monitored by the treating physician. The diagnosis of AD on itself definitely does not imply the immediate and full revocation of a driving license nor does it implicate a necessary referral for a formal on-road driving assessment. There is no evidence to recommend a reduced exposure or a mandatory co-pilot. A MMSE-based framework to trichotomise AD patients as safe, indeterminate or unsafe is presented. The final decision on driving fitness can only be made after careful history taking and clinical examination, neuropsychological, functional and behavioral evaluation and, only for selected cases, a formal assessment of driving performance.

Three-dimensional porous hollow fibre copper electrodes for efficient and high-rate electrochemical carbon dioxide reduction.

Aqueous-phase electrochemical reduction of carbon dioxide requires an active, earth-abundant electrocatalyst, as well as highly efficient mass transport. Here we report the design of a porous hollow fibre copper electrode with a compact three-dimensional geometry, which provides a large area, three-phase boundary for gas-liquid reactions. The performance of the copper electrode is significantly enhanced; at overpotentials between 200 and 400 mV, faradaic efficiencies for carbon dioxide reduction up to 85% are obtained. Moreover, the carbon monoxide formation rate is at least one order of magnitude larger when compared with state-of-the-art nanocrystalline copper electrodes. Copper hollow fibre electrodes can be prepared via a facile method that is compatible with existing large-scale production processes. The results of this study may inspire the development of new types of microtubular electrodes for electrochemical processes in which at least one gas-phase reactant is involved, such as in fuel cell technology.

Synthesis of porous inorganic hollow fibers without harmful solvents.

A route for the fabrication of porous inorganic hollow fibers with high surface-area-to-volume ratio that avoids harmful solvents is presented. The approach is based on bio-ionic gelation of an aqueous mixture of inorganic particles and sodium alginate during wet spinning. In a subsequent thermal treatment, the bio-organic material is removed and the inorganic particles are sintered. The method is applicable to the fabrication of various inorganic fibers, including metals and ceramics. The route completely avoids the use of organic solvents, such as N-methyl-2-pyrrolidone, and additives associated with the currently used fiber fabrication methods. In addition, it inherently avoids the manifestation of so-called macro voids and allows the facile incorporation of additional metal oxides in the inorganic hollow fibers.