Multicomponent synthesis and photophysical study of novel α,ß-unsaturated carbonyl depsipeptides and peptoids.

Multicomponent reactions were performed to develop novel α,ß-unsaturated carbonyl depsipeptides and peptoids incorporating various chromophores such as cinnamic, coumarin, and quinolines. Thus, through the Passerini and Ugi multicomponent reactions (P-3CR and U-4CR), we obtained thirteen depsipeptides and peptoids in moderate to high yield following the established protocol and fundamentally varying the electron-rich carboxylic acid as reactants. UV/Vis spectroscopy was utilized to study the photophysical properties of the newly synthesized compounds. Differences between the carbonyl-substituted chromophores cause differences in electron delocalization that can be captured in the spectra. The near UV regions of all the compounds exhibited strong absorption bands. Compounds P2, P5, U2, U5, and U7 displayed absorption bands in the range of 250-350 nm, absorbing radiation in this broad region of the electromagnetic spectrum. A photostability study for U5 showed that its molecular structure does not change after exposure to UV radiation. Fluorescence analysis showed an incipient emission of U5, while U6 showed blue fluorescence under UV radiation. The photophysical properties and electronic structure were also determined by TD-DFT theoretical study.

Ugi efficient synthesis of novel N-alkylated lipopeptides, antimicrobial properties and computational studies in Staphylococcus aureus via MurD antibacterial target.

Lipopeptides are medicinally essential building blocks with strong hemolytic, antifungal and antibiotic potential. In the present research article, we are presenting our findings regarding the synthesis of N-alkylated lipopeptides via Ugi four-component approach, their antimicrobial potential against pathogenic (Gram-positive and Gram-negative) bacteria, as well as computational studies to investigate the compounds binding affinity and dynamic behavior with MurD antibacterial target. Molecular docking demonstrated the compounds have good binding ability with MurD enzyme. The FT94, FT95 and FT97 compounds revealed binding affinity scores of -8.585 kcal mol- 1, -7.660 kcal mol- 1 and -7.351 kcal mol- 1, respectively. Furthermore, dynamics analysis pointed the systems high structure dynamics. The docking and simulation results were validated by binding free energies, demonstrating solid intermolecular interactions and in the assay in vitro, the Minimal Inhibitory Concentration (MIC) of FT97 to Staphylococcus aureus (S. aureus) was 62.5 µg/mL. In conclusion, a moderate inhibitory response of peptoid FT97 was observed against the Gram-positive bacteria, S. aureus and B. cereus.

Value-added long-chain aliphatic compounds obtained through pyrolysis of phosphorylated chitin.

In this work, chitin, as a biobased polymer, is used as a precursor to obtain a phosphorylated derivatives. The influence of the different degree of phosphorylation in chitin on pyrolysis pattern was investigated. In order to understand the pyrolysis mechanism and the potential application of phosphorylated chitins, the samples were pyrolyzed at different temperatures and analyzed by FTIR, SEM, and Py-GC/MS analysis. Moreover, the thermal degradation and the evolved gases during chitin degradation and its derivatives were measured. The results showed that phosphorylation of chitin decreased the thermal stability of biopolymer and significantly changed the pattern of pyrolysis compared to neat chitin. The production of long-chain hydrocarbons was detected during pyrolysis of phosphorylated chitin, whereas this was not the case with raw chitin. Those two effects were more pronounced as the degree of phosphorylation increased. Chitin with the degree of phosphorylation (DS 1.35) exhibited the highest selectivity (91 %) towards production of long-chain hydrocarbons (C12-C17) at 500 °C. Moreover, the obtained results allowed to propose, for the first time, the mechanism of pyrolysis of phosphorylated chitin.

Valorization of food waste to produce intelligent nanofibrous ß-chitin films.

The efficient use of waste from food processing industry is one of the innovative approaches within sustainable development, because it can be transferred into added value products, which could improve economic, energetic and environmental sectors. In this context, the squid pen waste from seafood industry was used as raw material to obtain nanofibrous ß-chitin films. In order to extend functionality of obtained films, elderberry extract obtained from biomass was added at different concentrations. The tensile strength of chitin-elderberry extract films was improved by 52%, elongation at break by 153% and water vapor barrier by 65%. The obtained material showed distinct color change when subjected to acidic or basic solutions. It was proven by CIELab color analysis that all color changes could be easily perceived visually. In addition, the obtained nanofibrous film was successfully used to monitor the freshness of Hake fish. Namely, when the film was introduced in a package that contained fresh fish, its color was efficiently changed within the time during the storage at 4 °C. The obtained results demonstrated that food processing waste could be efficiently valorized, and could give sustainable food package design as a spoilage indicator of high protein food.

Direct access to tetrasubstituted cyclopentenyl scaffolds through a diastereoselective isocyanide-based multicomponent reaction.

An efficient strategy combining the stereocontrol of organocatalysis with the diversity-generating character of multicomponent reactions is described to produce structurally unique, tetrasubstituted cyclopentenyl frameworks. An asymmetric Michael addition-hemiacetalization between α-cyanoketones and α,ß-unsaturated aliphatic aldehydes was performed for constructing cyclic hemiacetals, which were next employed as chiral bifunctional substrates in a new diastereoselective intramolecular isocyanide-based multicomponent reaction. This approach furnished a diversity of structurally complex compounds - including peptidomimetics and natural product hybrids in high stereoselectivity (up to >99% ee and up to >99 : 1 dr) and in moderate to high yields.

One-pot organocatalytic/multicomponent approach for the preparation of novel enantioenriched non-natural selenium-based peptoids and peptide-peptoid conjugates.

A combined organocatalytic and multicomponent synthetic approach was designed for the preparation of selenium-based peptoids and peptide-peptoid conjugates. This single-step synthetic protocol comprises the organocatalytic asymmetric insertion of phenylselenium in the aldehyde moiety followed by the Ugi four-component reaction which results in obtaining the desired compounds in good-to-moderate yields and with good-to-excellent levels of stereoselectivity.

Ugi reaction-derived prolyl peptide catalysts grafted on the renewable polymer polyfurfuryl alcohol for applications in heterogeneous enamine catalysis.

The multicomponent synthesis of prolyl pseudo-peptide catalysts using the Ugi reaction with furfurylamines or isocyanides is described. The incorporation of such a polymerizable furan handle enabled the subsequent polymerization of the peptide catalyst with furfuryl alcohol, thus rendering polyfurfuryl alcohol-supported catalysts for applications in heterogeneous enamine catalysis. The utilization of the polymer-supported catalysts in both batch and continuous-flow organocatalytic procedures proved moderate catalytic efficacy and enantioselectivity, but excellent diastereoselectivity in the asymmetric Michael addition of n-butanal to ß-nitrostyrene that was used as a model reaction. This work supports the potential of multicomponent reactions towards the assembly of catalysts and their simultaneous functionalization for immobilization.

Synthesis of diN-Substituted Glycyl-Phenylalanine Derivatives by Using Ugi Four Component Reaction and Their Potential as Acetylcholinesterase Inhibitors.

Ugi four component reaction (Ugi-4CR) isocyanide-based multicomponent reactions were used to synthesize diN-substituted glycyl-phenylalanine (diNsGF) derivatives. All of the synthesized compounds were characterized by spectroscopic and spectrometric techniques. In order to evaluate potential biological applications, the synthesized compounds were tested in computational models that predict the bioactivity of organic molecules by using only bi-dimensional molecular information. The diNsGF derivatives were predicted as cholinesterase inhibitors. Experimentally, all of the synthesized diNsGF derivatives showed moderate inhibitory activities against acetylcholinesterase (AChE) and poor activities against butyrylcholinesterase (BuChE). Compound 7a has significant activity and selectivity against AChE, which reveals that the diNsGF scaffold could be improved to reach novel candidates by combining other chemical components of the Ugi-4CR in a high-throughput combinatorial screening experiment. Molecular docking experiments of diNsGF derivatives inside AChE suggest that these compounds placed the phenylalanine group at the peripheral site of AChE. The orientations and chemical interactions of diNsGF derivatives were analyzed, and the changeable groups were identified for future exploration of novel candidates that could lead to the improvement of diNsGF derivative inhibitory activities.

A stereoselective sequential organocascade and multicomponent approach for the preparation of tetrahydropyridines and chimeric derivatives.

A stereoselective multicomponent approach leading to a novel class of pentasubstituted tetrahydropyridines is described. Variation of the components enabled the incorporation of peptide, sugar and steroid moieties to access chimeric derivatives. DFT calculations provide insights about the unprecedented high diastereoselectivity of the MCR.

Multicomponent Synthesis of Cyclic Depsipeptide Mimics by Ugi Reaction Including Cyclic Hemiacetals Derived from Asymmetric Organocatalysis.

The synthesis of novel cyclic depsipeptide mimics by means of an organocatalytic conjugate addition, leading to chiral cyclic hemiacetals, followed by a multicomponent reaction with α-amino acids and isocyanides, is described. The initial organocatalytic step is employed for the asymmetric derivatization of α,ß-unsaturated aldehydes to 4,5-disubstituted 2-hydroxytetrahydropyrans, which are next used as chiral bifunctional substrates on the Ugi five-center three-component reaction, giving rise to nine-membered-ring lactones. This sequential approach proved to be suitable for the rapid generation of molecular complexity through the combination of aliphatic, dipeptidic, glucosidic, and lipidic isocyanides with several amino acids, thus giving access to amido-, glyco-, and lipo-depsipeptide scaffolds featuring natural product-like structures.

Highly stereoselective synthesis of natural-product-like hybrids by an organocatalytic/multicomponent reaction sequence.

In an endeavor to provide an efficient route to natural product hybrids, described herein is an efficient, highly stereoselective, one-pot process comprising an organocatalytic conjugate addition of 1,3-dicarbonyls to α,ß-unsaturated aldehydes followed by an intramolecular isocyanide-based multicomponent reaction. This approach enables the rapid assembly of complex natural product hybrids including up to four different molecular fragments, such as hydroquinolinone, chromene, piperidine, peptide, lipid, and glycoside moieties. The strategy combines the stereocontrol of organocatalysis with the diversity-generating character of multicomponent reactions, thus leading to structurally unique peptidomimetics integrating heterocyclic, lipidic, and sugar moieties.

Multicomponent combinatorial development and conformational analysis of prolyl peptide-peptoid hybrid catalysts: application in the direct asymmetric Michael addition.

A solution-phase combinatorial approach based on the Ugi four-component reaction was implemented for the development of new prolyl peptide-peptoid hybrid catalysts. Three different elements of diversity were varied during the creation of the set of catalysts: the amine, oxo, and isocyano components. The multicomponent nature of this process enabled the straightforward generation of a series of peptide-peptoid hybrids having the generic sequence Pro-N-R(1)-Xaa-NHR(3), with Xaa being either Gly (R(2) = H) or Aib (R(2) = gem-Me) and R(1) and R(3) either alkyl or amino acid substituents. The catalytic behavior of the peptide-peptoid hybrids was assessed in the asymmetric conjugate addition of aldehydes to nitroolefins, where most of the catalysts showed great efficacy and rendered the Michael adducts with good to excellent enantio- and diastereoselectivity. A molecular modeling study was performed for two distinct catalysts aiming to understand their conformational features. The conformational analysis provided important information for understanding the remarkable stereocontrol achieved during the organocatalytic transformation.