Dependence of new environmental nano organic semiconductor nickel-(II)-tetraphenyl-21H,23H-porphyrin films on substrate type for energy storage applications.

Characterization of organic nickel-(II)-tetraphenyl-21H,23H-porphyrin films as a function of substrate type was performed for energy storage applications and consequently environmental enhancement. Nickel-(II)-tetraphenyl-21H,23H-porphyrin films show an amorphous phase. They have a crystallite size of 8-11 nm. Strain caused a shift of different humps' positions. The measured transmittance has high values within the range of 85-91%, and the absorption coefficient values were included within the high-absorption region. Both optical gap and fundamental gap, refractive index, carrier-concentration-to-effective-mass ratio and lattice dielectric constant were calculated, and they were found to be increased, except refractive index and lattice dielectric constant. The obtained data indicated that nickel-(II)-tetraphenyl-21H,23H-porphyrin films are a candidate for energy storage applications.

Influence of gamma irradiation on linear and nonlinear optical properties of nanocrystalline manganese(III) chloride tetraphenylporphine thin films.

90 nm thickness of MnTPPCl thin films were deposited by thermal evaporation technique on glass and quartz substrates under vacuum. The examined thin films were irradiated by 60Co γ-rays with 150 kGy. XRD and FTIR techniques are used to comprehend the structure of MnTPPCl thin films. The results confirmed that the structure of pristine thin films is nanocrystallites dispersed in the amorphous matrix and the irradiated films have an amorphous structure. Refractive index, oscillator's parameters (dispersion energy, Ed, oscillator energy, Eo), the absorption coefficient, optical energy gap, and Urbach energy were estimated before and after exposure to γ-irradiation by using spectrophotometric measurements. All mentioned parameters were influenced by the γ-irradiation process. The type of electronic transition was classified as a direct allowed transition. The gamma irradiation process was caused an increase in the fundamental band gap energy from 2.48 to 2.52 eV (blue shift) which is good for solar cells window. Third-order nonlinear optical susceptibility χ(3) and the nonlinear refractive index n2 of MnTPPCl thin films were studied before and after γ-irradiation. An increase in χ(3) and n2 with γ-irradiation is observed, so it is recommended to be used as optical switching applications.

Influence of gamma ray irradiation and annealing temperature on the optical constants and spectral dispersion parameters of metal-free and zinc tetraphenylporphyrin thin films: A comparative study.

In this work, we report on the effect of γ-ray irradiation and annealing temperature on the optical properties of metal-free tetraphenylporphyrin, H2TPP, and zinc tetraphenylporphyrin, ZnTPP, thin films. Thin films of H2TPP and ZnTPP were successfully prepared by the thermal evaporation technique. The optical properties of H2TPP and ZnTPP films were investigated using spectrophotometric measurements of the transmittance and reflectance at normal incidence of light in the wavelength range from 200 to 2500 nm. The absorption spectra of H2TPP showed four absorption bands, namely the Q, B, N and M bands. The effect of inserting Zn atom into the cavity of porphyrin macrocycle in ZnTPP molecule distorted the Q and B bands, reduced the width of absorption region and influenced the optical constants and dispersion parameters. In all conditions, the type of electron transition is indirect allowed transition. Anomalous dispersion is observed in the absorption region but normal dispersion occurs in the transparent region of spectra. We adopted multi-oscillator model and the single oscillator model to interpret the anomalous and normal dispersion, respectively. We have found that the annealing temperature has mostly the opposite effect of γ-ray irradiation on absorption and dispersion characteristics of these films.

On the spectroscopic analyses of Perylene-66.

In the present work, a combined experimental and theoretical study on molecular structure and vibrational frequencies of Perylene-66 were reported. The FT-IR spectrum of Perylene-66 is recorded in the solid phase. The equilibrium geometries, harmonic vibrational frequencies, thermo-chemical parameters, total dipole moment and HOMO-LUMO energies are calculated by DFT/B3LYP utilizing 6-311G(d,p) basis set. Results showed that Perylene-66 is highly recommended to be a promising structure for many applications in optoelectronic devices due to its high calculated dipole moment value (3.6 Debye) and lower HOMO-LUMO energy gap of 3.2 eV.

On the spectroscopic analyses of thioindigo dye.

A combined experimental and theoretical study on molecular structure and vibrational frequencies of thioindigo was reported. The FT-IR spectrum of thioindigo is recorded in the solid phase. The equilibrium geometries, harmonic vibrational frequencies, thermo-chemical parameters, total dipole moment and HOMO-LUMO energies are calculated by density functional theory DFT/B3LYP utilizing 6-311G(d,p) basis set. Results showed that cis-isomer is highly recommended to be a promising structure for many applications in optoelectronic devices due to its high calculated dipole moment value (3.44 Debye) which indicates its high reactivity to interact with the surrounding molecules as compared to the trans-isomer which has no dipole moment. Both isomers have a similar HOMO-LUMO energy gap, of 3.02 eV (cis-isomer) and 2.78 eV (trans-isomer).

DFT approach for FT-IR spectra and HOMO-LUMO energy gap for N-(p-dimethylaminobenzylidene)-p-nitroaniline (DBN).

In the present work, a combined experimental and computational study for the optimized molecular structural parameters, FT-IR spectra, thermo-chemical parameters, total dipole moment and HOMO-LUMO energy gap for N-(p-diethylaminobenzylidene)p-nitroaniline (DBN) have been investigated using B3LYP/6-311G basis set. Our calculated results have showed that the investigated compound possesses a dipole moment of 12 Debye and HOMO-LUMO energy gap of 2.94 eV which indicate high recommendations for photovoltaic devices fabrication.

FT-IR spectroscopic analyses of 3-Methyl-5-Pyrazolone (MP).

In the present work both experimental and computational FT-IR spectroscopic studies on 3-Methyl-5-Pyrazolone (MP) were reported. Experimental FT-IR spectrum for MP compound is recorded in powder form. Important physical parameters were reported such as structural parameters, vibrational frequencies, entropy, total energy, total dipole moment and HOMO-LUMO energy gap using DFT/B3LYP/6-311G(d,p) basis set. MP molecule has a total dipole moment of 2.83 Debye and HOMO-LUMO energy gap of 5.80 eV. Results indicate also that exposure to UV changes the spin from singlet to doublet state; one can conclude that MP compound may undergo anomalous Zeeman like effect.

On the spectroscopic analyses of (E)-3-(dicyclopropyl methylene)-dihydro-4-[1-(2,5 dimethylfuran-3-yl) ethylidene]furan-2,5-dione.

In this work, a combined experimental and theoretical study on molecular structure and vibrational frequencies of (E)-3-(dicyclopropyl methylene)-dihydro-4-[1-(2,5 dimethylfuran-3-yl) ethylidene] furan-2,5-dione [DCPF] were reported. The FT-IR spectra of DCPF isomers are recorded in the solid phase. The equilibrium geometries, harmonic vibrational frequencies, thermo-chemical parameters, total dipole moment and HOMO-LUMO energies are calculated by density functional theory DFT/B3LYP utilizing 6-311G(d,p) basis set. Results showed that scaled frequencies are in good agreement with experimental values. The HOMOs and the LUMOs energies of DCPF isomers were 3.8 and 2.7eV for E and C isomers,respectively.

Density functional theory (DFT) investigation of molecular structure and frontier molecular orbitals (FMOs) of P-N,N-dimethylaminobenzylidenemalononitrile (DBM).

P-N,N-dimethylaminobenzylidenemalononitrile (DBM) dye belongs to a class of organic compounds known as molecular rotors. Its optimized geometry and frontier molecular orbitals (FMOs), before and after ultraviolet (UV) irradiation, were obtained by DFT/B3LYP level with complete relaxation in the potential energy surface using 6-311++G(d,p) basis set. It is found that the length of C-C bonds of the DBM molecule increases after the UV irradiation, which leads to an increase in its dipole moment making it as a promising material for solar cell applications. Also, its HOMO-LUMO gap decreased from 3.46 to 3.34 eV. From the cyclic voltammetry measurements the value of HOMO-LUMO gap is equal to 3.21 eV. This means that B3LYP/6-311++G(d,p) level of theory is the best one for calculations.

Spectroscopic analysis of 2-(2,3-dihydro-1,5-dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitro-phenyl) acetonitrile.

The optimized geometry and vibrational frequencies of 2-(2,3-dihydro-1,5-dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitro-phenyl) acetonitrile (DOPNA) were obtained by ab initio DFT/B3LYP level with complete relaxation in the potential energy surface using 6-31G and 6-311G basis sets. The Fourier-transform infrared (FT-IR) spectrum of DOPNA has been recorded in the region 4000-400 cm(-1). The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR spectrum. The calculated frequencies are in comparable agreement with the experimental frequencies. The calculated energy span between the HOMO and the LUMO of DOPNA is 2.94 and 2.87eV by B3LYP/6-31G and B3LYP/6-311G, respectively.

Ab initio HF, DFT and experimental (FT-IR) investigation of vibrational spectroscopy of P-N,N-dimethylaminobenzylidenemalononitrile (DBM).

The optimized geometry and vibrational frequencies of P-N,N-dimethylaminobenzylidenemalononitrile (DBM) were obtained by ab initio HF and DFT/B3LYP levels with complete relaxation in the potential energy surface using 6-31++G(d,p) and 6-311++G(d,p) basis sets. The Fourier-transform infrared (FT-IR) spectrum of DBM has been recorded in the region 4000-400 cm(-1). The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR spectrum. The calculated frequencies are in good agreement with the experimental frequencies.

Fourier-transform infrared and optical absorption spectra of 4-tricyanovinyl-N,N-diethylaniline thin films.

Thin films of 4-tricyanovinyl-N,N-diethylaniline (TCVA) were prepared for the first time using thermal evaporation technique. The molecular structure and electronic transitions of TCVA films were investigated by Fourier-transform infrared (FTIR) and ultraviolet-visible (UV-vis) spectra. The observed vibrational wavenumbers in FTIR spectra were analysed and assigned to different normal modes of the molecule. UV-vis electronic absorption spectral measurements of TCVA films were analysed to obtain the electronic transitions and optical band gap (E(g)). Other important optical parameters such as molar extinction coefficient (epsilon(molar)), the oscillator strength (f), and the electric dipole strength (q(2)) were also reported.

Optical absorption of tetraphenylporphyrin thin films in UV-vis-NIR region.

The optical absorption of thermally evaporated tetraphenylporphyrin (TPP) in the UV-vis-NIR region have been studied. The absorption spectra recorded in the UV-vis region for the as deposited and annealed films showed different absorption bands, namely the Soret(B) at region 360-490nm, Q-band region consist of four bands in the region 500-720nm and two other bands labeled N and M in UV region. The Soret band always shows its characteristic effect splitting in all the TPP thin films and the effect of annealing on the intensities of these components have been observed. The spectra of the infrared absorption allow characterization of vibrational modes for the powder, as deposited and annealed thin films. Some of the optical absorption parameters, namely molar extinction coefficient, epsilon, half band width, Deltalambda, electronic dipole strength, q(2) and oscillator strength, f, of the principle optical transitions have also been evaluated.

Optical absorption of tetraphenylporphyrin thin films in UV-vis-NIR region.

The optical absorption of thermally-evaporated tetraphenylporphyrin (TPP), in the UV-vis-NIR region has been studied. The absorption spectra recorded in the UV-vis region for the as-deposited and annealed films showed different absorption bands, namely the Soret, B, at region 360-490 nm, Q-band region consist of four bands in the region 500-720 nm and two other bands labeled N and M in UV region. The Soret band always shows splitting in all the TPP thin films and the effect of annealing on the intensities of these components have been observed. The spectra of the infrared absorption allow characterization of vibrational modes for the powder, as deposited and annealed thin films. Some of the optical absorption parameters, namely molar extinction coefficient (epsilon), half band width (Deltalambda), electronic dipole strength (q2), and oscillator strength (f), of the principal optical transitions have also been evaluated.