Manipulation of Crystal Orientation and Phase Distribution of Quasi-2D Perovskite through Synergistic Effect of Additive Doping and Spacer Engineering.

The diammonium precursor 1,4-phenylenedimethanammonium (PDMA) was used as a large organic spacer for the preparation of Dion-Jacobson-type quasi-2D perovskites (PDMA)(MA)n-1PbnI3n+1 (MA = methylammonium). Films with composition ⟨n⟩ = 5 comprised randomly orientated grains and multiple microstructural domains with locally differing n values. However, by mixing the Dion-Jacobson-type spacer PDMA and the Ruddlesden-Popper-type spacer propylammonium (PA), the crystal orientation in both the vertical and the horizonal directions became regulated. High crystallinity owing to well-matched interlayer distances was observed. Combining this spacer-engineering approach with the addition of methylammonium chloride (MACl) led to full vertical alignment of the crystal orientation. Moreover, the microstructural domains at the substrate interface changed from low-n (n = 1, 2, 3) to high-n (n = 4, 5), which may be beneficial for hole extraction at the interface between perovskite and hole transport layer due to a more finely tuned band alignment. Our work sheds light on manipulating the crystallization behavior of quasi-2D perovskite and further paves the way for highly stable and efficient perovskite devices.

Simultaneous Enhancement of Lithium Transfer Kinetics and Structural Stability in Dual-Phase TiO2 Electrodes by Ruthenium Doping.

Dual-phase TiO2 consisting of bronze and anatase phases is an attractive electrode material for fast-charging lithium-ion batteries due to the unique phase boundaries present. However, further enhancement of its lithium storage performance has been hindered by limited knowledge on the impact of cation doping as an efficient modification strategy. Here, the effects of Ru4+ doping on the dual-phase structure and the related lithium storage performance are demonstrated for the first time. Structural analysis reveals that an optimized doping ratio of Ru:Ti = 0.01:0.99 (1-RTO) is vital to maintain the dual-phase configuration because the further increment of Ru4+ fraction would compromise the crystallinity of the bronze phase. Various electrochemical tests and density functional theory calculations indicate that Ru4+ doping in 1-RTO enables more favorable lithium diffusion in the bulk for the bronze phase as compared to the undoped TiO2 (TO) counterpart, while lithium kinetics in the anatase phase are found to remain similar. Furthermore, Ru4+ doping leads to a better cycling stability for 1-RTO-based electrodes with a capacity retention of 82.1% after 1200 cycles at 8 C as compared to only 56.1% for TO-based electrodes. In situ X-ray diffraction reveals a reduced phase separation in the lithiated anatase phase, which is thought to stabilize the dual-phase architecture during extended cycling. The simultaneous enhancement of rate ability and cycling stability of dual-phase TiO2 enabled by Ru4+ doping provides a new strategy toward fast-charging lithium-ion batteries.

Disentangling Hot Carrier Decay and the Nature of Low-n to High-n Transfer Processes in Quasi-Two-Dimensional Layered Perovskites.

Quasi-two-dimensional (2D) metal halide perovskites (MHPs) are promising photovoltaic (PV) materials because of their impressive optical and optoelectronic properties and improved stability compared to their 3D counterparts. The presence of domains with varying numbers of inorganic layers between the organic spacers (n-phases), each with different bandgaps, makes the photoinduced carrier dynamics in films of these materials complex and intriguing. Existing interpretations of the ultrafast femto- or picosecond spectroscopy data have been inconsistent, most of them focusing either on exciton/charge transfer from low-n to high-n phases or on hot carrier cooling, but not combined. Here, we present a comprehensive study of the carrier dynamics in the Dion-Jacobson type (PDMA)(MA)(n-1)PbnI(3n+1) (PDMA = 1,4-phenylenedimethylammonium, MA = methylammonium) perovskite, stoichiometrically prepared as ⟨n⟩ = 5. Within the film, a coexistence of various n-phases is observed instead of solely the n = 5 phase, resulting in an interesting energy landscape for the motion of excitons and charge carriers. We disentangle hot carrier cooling from exciton transfer between low-n and high-n phases using ultrafast time-resolved photoluminescence and transient absorption spectroscopy. Photophysical modeling by target analysis shows that carrier cooling occurring on a subpicosecond time scale is followed by exciton transfer from low-n into high-n phases in ca. 35 ps when the film is excited by 532 or 490 nm light. Carriers in the high-n phase are much longer lived and decay in a ns time window. Overall, our results provide a comprehensive understanding of the photophysics of this material, which helps to optimize quasi-2D MHP materials for a new generation of PV devices.

Stabilizing Crystal Framework of an Overlithiated Li1+xMn2O4 Cathode by Heterointerfacial Epitaxial Strain for High-Performance Microbatteries.

To meet the increasing demands of high-energy and high-power-density lithium-ion microbatteries, overlithiated Li1+xMn2O4 (0 ≤ x ≤ 1) is an attractive cathode candidate due to the high theoretical capacity of 296 mAh g-1 and the interconnected lithium-ion diffusion pathways. However, overlithiation triggers the irreversible cubic-tetragonal phase transition due to Jahn-Teller distortion, causing rapid capacity degradation. In contrast to conventional lithium-ion batteries, microbatteries offer the opportunity to develop specific thin-film-based modification strategies. Here, heterointerfacial lattice strain is proposed to stabilize the spinel crystal framework of an overlithiated Li1+xMn2O4 (LMO) cathode by epitaxial thin film growth on an underlying SrRuO3 (SRO) electronic conductor layer. It is demonstrated that the lattice misfit at the LMO/SRO heterointerface results in an in-plane epitaxial constraint in the full LMO film. This suppresses the lattice expansion during overlithiation that typically occurs in the in-plane direction. It is proposed by density functional theory modeling that the epitaxial constraint can accommodate the internal lattice stress originating from the cubic-tetragonal transition during overlithiation. As a result, a doubling of the capacity is achieved by reversibly intercalating a second lithium ion in a LiMn2O4 epitaxial cathode with a complete reversible phase transition. An impressive cycling stability can be obtained with reversible capacity retentions of above 90.3 and 77.4% for the 4 and 3 V range, respectively. This provides an effective strategy toward a stable overlithiated Li1+xMn2O4 epitaxial cathode for high-performance microbatteries.

Thermally processed Ni-and Co-struvites as functional materials for proton conductivity.

Here, we describe how to synthesise proton-conductive transition metal phosphates (TMPs) by direct thermal processing of precursor M-struvites, NH4MPO4·6H2O, with M = Ni2+, Co2+. In the as-derived TMP phases their thermal history and bulk proton conductivity were linked with the structural information about the metal coordination, phosphate groups, and volatile compounds. These aspects were investigated with vibrational and synchrotron-based spectroscopic methods (FT-IR, FT-RS, XAS). We elucidated the structures of amorphous and crystalline Ni- and Co phosphate phases in association with different coordination changes and distortion degrees of the metal polyhedra as they developed upon heating. Ni-struvite transformed to a stable amorphous phase over a broad range of temperatures (90 °C < T < 600 °C), in which it remained in an octahedral coordination environment, but the degree of distortion changed with T. In contrast, heating of Co-struvite led to several successive crystalline phases with only unstable transitional and short-lived amorphous components. Among the as-occurring phases, a highly functional layered M-dittmarite NH4MPO4·H2O obtained at low temperatures (T < 200 °C) demonstrated high proton conductivity values of 4.2 × 10-5 S cm-1 for Ni-dittmarite and Co-dittmarite > 10-4 S cm-1 at room temperature. Even at low humidity, these values are comparable with those found for Nafion, MOFs, some perovskites or composite materials. Coprecipitation of phosphates and transition metal cations in the form of struvite is potentially a viable method to extract these elements from wastewater. Thus, we propose that recycled M-struvites could be potentially further directly upcycled into crystalline and amorphous TMPs useful for electrochemical applications.

Template-free synthesis of mesoporous and amorphous transition metal phosphate materials.

We present how mesoporosity can be engineered in transition metal phosphate (TMPs) materials in a template-free manner. The method involves the transformation of a precursor metal phosphate phase, called M-struvite (NH4MPO4·6H2O, M = Mg2+, Ni2+, Co2+, NixCo1-x2+). It relies on the thermal decomposition of crystalline M-struvite precursors to an amorphous and simultaneously mesoporous phase, which forms during degassing of NH3 and H2O. The temporal evolution of mesoporous frameworks and the response of the metal coordination environment were followed by in situ and ex situ scattering and diffraction, as well as X-ray spectroscopy. Despite sharing the same precursor struvite structure, different amorphous and mesoporous structures were obtained depending on the involved transition metal. We highlight the systematic differences in absolute surface area, pore shape, pore size, and phase transitions depending on the metal cation present in the analogous M-struvites. The amorphous structures of thermally decomposed Mg-, Ni- and NixCo1-x-struvites exhibit high surface areas and pore volumes (240 m2 g-1 and 0.32 cm-3 g-1 for Mg and 90 m2 g-1 and 0.13 cm-3 g-1 for Ni). We propose that the low-cost, environmentally friendly M-struvites could be obtained as recycling products from industrial and agricultural wastewaters. These waste products could be then upcycled into mesoporous TMPs through a simple thermal treatment for further application, for instance in (electro)catalysis.

Altering the Alkaline Metal Ions in Lepidocrocite-Type Layered Titanate for Sodium-Ion Batteries.

The relatively large ionic radius of the Na ion is one of the primary reasons for the slow diffusion of Na ions compared to that of Li ions in de/intercalation processes in sodium-ion batteries (SIBs). Interlayer expansion of intercalation hosts is one of the effective techniques for facilitating Na-ion diffusion. For most ionic layered compounds, interlayer expansion relies on intercalation of guest ions. It is important to investigate the role of these ions for material development of SIBs. In this study, alkali-metal ions (Li+, Na+, K+, and Cs+) with different sizes were intercalated into lepidocrocite-type layered titanate by a simple ion-exchange technique to achieve interlayer modulation and those were then evaluated as anode materials for SIBs. By controlling the intercalated alkaline ion species, basal spacings of layered titanates (LTs) in the range of 0.68 to 0.85 nm were obtained. Interestingly, the largest interlayer spacing induced by the large size of Cs did not yield the best performance, while the Na intercalated layered titanate (Na-ILT) demonstrated a superior performance with a specific capacity of 153 mAh g-1 at a current density of 0.1 A g-1. We found that the phenomena can be explained by the high alkaline metal ion concentration and the efficient utilization of the active sites in Na-ILT. The detailed analysis indicates that large intercalating ions like Cs can hamper sodium-ion diffusion although the interlayer spacing is large. Our work suggests that adopting an appropriate interlayer ion species is key to developing highly efficient layered electrode materials for SIBs.

Influence of the Template Layer on the Structure and Ferroelectric Properties of PbZr0.52Ti0.48O3 Films.

The microstructure of the PbZr0.52Ti0.48O3 (PZT) films is known to influence the ferroelectric properties, but so far mainly the effect of the deposition conditions of the PZT has been investigated. To our knowledge, the influence of the underlying electrode layer and the mechanisms leading to changes in the PZT microstructure have not been explored. Using LaNiO3 (LNO) as the bottom electrode material, we investigated the evolution of the PZT microstructure and ferroelectric properties for changing LNO pulsed-laser deposition conditions. The explored deposition conditions were the O2 pressure, total pressure, and thickness of the electrode layer. Increasing both the O2 pressure and the thickness of the electrode layer changes the growth of PZT from a smooth, dense film to a rough, columnar film. We explain the origin of the change in PZT microstructure as the increased roughness of the electrode layer in relaxing the misfit strain. The strain relaxation mechanism is evidenced by the increase in the crystal phase with bulk LNO unit cell dimensions in comparison to the crystal phase with substrate-clamped unit cell dimensions. We explain the change from a dense to a columnar microstructure as a result of the change in the growth mode from Frank-van der Merwe to Stranski-Krastanov. The ferroelectric properties of the columnar films are improved compared to those of the smooth, dense films. The ability to tune the ferroelectric properties with the microstructure is primarily relevant for ferroelectric applications such as actuators and systems for energy harvesting and storage.

Multilayer films of exfoliated 2D oxide nanosheets by electrospray deposition.

The potential of the electrospray deposition technique as new method to make nanosheet-based multilayer films is evaluated. Densely packed nanosheet-based films with thicknesses of 1-20 nm with rms roughnesses of 2.1-2.4 nm were fabricated on samples of 1 cm2 size with a growth rate of 0.5 nm/min. Electrosprayed Ti0.87O2 nanosheet films were successfully used as oriented growth templates for 40 nm perovskite SrRuO3 thin films grown by pulsed laser deposition. The electrospray method provides a fast and easy alternative to the more commonly used Langmuir-Blodgett (LB) deposition method for nanosheet films.

Epitaxial lift-off of freestanding (011) and (111) SrRuO3 thin films using a water sacrificial layer.

Two-dimensional freestanding thin films of single crystalline oxide perovskites are expected to have great potential in integration of new features to the current Si-based technology. Here, we showed the ability to create freestanding single crystalline (011)- and (111)-oriented SrRuO3 thin films using Sr3Al2O6 water-sacrificial layer. The epitaxial Sr3Al2O6(011) and Sr3Al2O6(111) layers were realized on SrTiO3(011) and SrTiO3(111), respectively. Subsequently, SrRuO3 films were epitaxially grown on these sacrificial layers. The freestanding single crystalline SrRuO3(011)pc and SrRuO3(111)pc films were successfully transferred on Si substrates, demonstrating possibilities to transfer desirable oriented oxide perovskite films on Si and arbitrary substrates.

Long-range ordering of two-dimensional wide bandgap tantalum oxide nanosheets in printed films.

Two-dimensional oxide materials are a well-studied, interesting class of materials, enabled by the fact that their bulk layered metal oxides, such as titanates and niobates, can be easily exfoliated within minutes into 2D nanosheets. However, some promising oxide materials, such tantalum oxide, are much more difficult to delaminate, taking several weeks, due to the higher charge density resulting in stronger Coulombic interactions between the layers. This intrinsic constraint has limited detailed studies for exploiting the promising properties of tantalum oxide 2D nanosheets towards enhanced catalysis and energy storage. Here, we have studied in detail the exfoliation mechanism of high charge density 2D materials, specifically tantalum oxide (TaO3) nanosheets. Optimization of tetrabutylphosphonium hydroxide (TBPOH) as the exfoliation agent in a 2 : 1 ratio to HTaO3 has resulted in a dramatic reduction of the exfoliation time down to only 36 hours at 80 °C. Furthermore, single monolayers of TaO3 nanosheets with >95% coverage have been achieved by Langmuir-Blodgett deposition, while thicker layers (ranging from several tens of nanometers up to microns) exhibiting long-range ordering of the present nanosheets have been realized through inkjet printing. Interestingly, scanning tunneling microscopy analysis indicated a wide bandgap of ∼5 eV for the single TaO3 nanosheets. This value is significantly higher than the reported values between 3.5 and 4.3 eV for the layered RbTaO3 parent compound, and opens up new opportunities for 2D oxide materials.

Metal Oxide Nanosheets as 2D Building Blocks for the Design of Novel Materials.

Research into 2-dimensional materials has soared during the last couple of years. Next to van der Waals type 2D materials such as graphene and h-BN, less well-known oxidic 2D equivalents also exist. Most 2D oxide nanosheets are derived from layered metal oxide phases, although few 2D oxide phases can be also made by bottom-up solution syntheses. Owing to the strong electrostatic interactions within layered metal oxide crystals, a chemical process is usually needed to delaminate them into their 2D constituents. This Review article provides an overview of the synthesis of oxide nanosheets, and methods to assemble them into nanocomposites, mono- or multilayer films. In particular, the use of Langmuir-Blodgett methods to form monolayer films over large surface areas, and the emerging use of ink jet printing to form patterned functional films is emphasized. The utilization of nanosheets in various areas of technology, for example, electronics, energy storage and tribology, is illustrated, with special focus on their use as seed layers for epitaxial growth of thin films, and as electrochemically active electrodes for supercapacitors and Li ion batteries.

Following the Kinetics of Barium Titanate Nanocrystal Formation in Benzyl Alcohol Under Near-Ambient Conditions.

In complex chemical syntheses (e.g., coprecipitation reactions), nucleation, growth, and coarsening often occur concurrently, obscuring the individual processes. Improved knowledge of these processes will help to better understand and optimize the reaction protocol. Here, a form-free and model independent approach, based on a combination of time-resolved small/wide-angle X-ray scattering, is employed to elucidate the effect of reaction parameters (such as precursor concentration, reactant stoichiometry, and temperature) on the nucleation, crystallization, and growth phenomena during the formation of nanocrystalline barium titanate. The strength of this approach is that it relies solely on the total scattered intensity (i.e., scattering invariant) of the investigated system, and no prior knowledge is required. As such, it can be widely applied to other synthesis protocols and material's systems. Through the scattering invariant, it is found that the amorphous-to-crystalline transformation of barium titanate is predominantly determined by the total amount of water released from the gel-like barium hydroxide octahydrate precursor, and three rate-limiting regimes are established. As a result of this improved understanding of the effect of varying reaction conditions, elementary boundary conditions can be set up for a better control of the barium titanate nanocrystal synthesis.

Micropatterned 2D Hybrid Perovskite Thin Films with Enhanced Photoluminescence Lifetimes.

The application of luminescent materials in display screens and devices requires micropatterned structures. In this work, we have successfully printed microstructures of a two-dimensional (2D), orange-colored organic/inorganic hybrid perovskite ((C6H5CH2NH3)2PbI4) using two different soft lithography techniques. Notably, both techniques yield microstructures with very high aspect ratios in the range of 1.5-1.8. X-ray diffraction reveals a strong preferential orientation of the crystallites along the c-axis in both patterned structures, when compared to nonpatterned, drop-casted thin films. Furthermore, (time-resolved) photoluminescence (PL) measurements reveal that the optical properties of (C6H5CH2NH3)2PbI4 are conserved upon patterning. We find that the larger grain sizes of the patterned films with respect to the nonpatterned film give rise to an enhanced PL lifetime. Thus, our results demonstrate easy and cost-effective ways to manufacture patterns of 2D organic/inorganic hybrid perovskites, while even improving their optical properties. This demonstrates the potential use of color-tunable 2D hybrids in optoelectronic devices.

Thermochemical Stability and Friction Properties of Soft Organosilica Networks for Solid Lubrication.

In view of their possible application as high temperature solid lubricants, the tribological and thermochemical properties of several organosilica networks were investigated over a range of temperatures between 25 and 580 °C. Organosilica networks, obtained from monomers with terminal and bridging organic groups, were synthesized by a sol-gel process. The influence of carbon content, crosslink density, rotational freedom of incorporated hydrocarbon groups, and network connectivity on the high temperature friction properties of the polymer was studied for condensed materials from silicon alkoxide precursors with terminating organic groups, i.e., methyltrimethoxysilane, propyltrimethoxysilane, diisopropyldimethoxysilane, cyclohexyltrimethoxysilane, phenyltrimethoxysilane and 4-biphenylyltriethoxysilane networks, as well as precursors with organic bridging groups between Si centers, i.e., 1,4-bis(triethoxysilyl)benzene and 4,4'-bis(triethoxysilyl)-1,1'-biphenyl. Pin-on-disc measurements were performed using all selected solid lubricants. It was found that materials obtained from phenyltrimethoxysilane and cyclohexyltrimethoxysilane precursors showed softening above 120 °C and performed best in terms of friction reduction, reaching friction coefficients as low as 0.01. This value is lower than that of graphite films (0.050 ± 0.005), a common bench mark for solid lubricants.

Modulating the External Facets of Functional Nanocrystals Enabled by Two-Dimensional Oxide Crystal Templates.

The nature of the external crystal facets is critical to control the (photo)catalytic properties. Two-dimensional materials can expose only one type of crystal facet among zero-dimensional (0D), one-dimensional (1D), and two-dimensional (2D) materials. Controllable tuning of the nature of the external crystal facets of 2D materials is highly desirable but very challenging. Here, we show that 2D particles with the desirable crystal facet for high-performance photocatalytic H2 generation can be obtained by using 2D metal oxide materials (i.e., nanosheets of Ca2Nb3O10 and Ti0.87O2) as templates taking consideration of the crystal configuration of 2D oxide and target compounds. We demonstrate that anatase TiO2 crystals grown on different nanosheet templates exhibit variations in photocatalytic hydrogen production rates from aqueous phase methanol solutions (6.7%), which can be attributed to the nature of the main crystal facet exposed. In view of the large number of 2D materials that have already been synthesized, this work offers a key to design and synthesize nanoparticles with the desirable specific external crystal facet for (photo)catalysis application.

Controlling Piezoelectric Responses in Pb(Zr0.52Ti0.48)O3 Films through Deposition Conditions and Nanosheet Buffer Layers on Glass.

Nanosheet Ca2Nb3O10 (CNOns) layers were deposited on ultralow expansion glass substrates by the Langmuir-Blodgett method to obtain preferential (001)-oriented growth of Pb(Zr0.52Ti0.48)O3 (PZT) thin films using pulsed laser deposition (PLD) to enhance the ferroelectric and piezoelectric properties of the films. The PLD deposition temperature and repetition frequency used for the deposition of the PZT films were found to play a key role in the precise control of the microstructure and therefore of the ferroelectric and piezoelectric properties. A film deposited at a high repetition frequency has a columnar grain structure, which helps to increase the longitudinal piezoelectric coefficient (d33f). An enhanced d33f value of 356 pm V-1 was obtained for 2-µm-thick PZT films on CNOns/glass substrates. This high value is ascribed to the preferential alignment of the crystalline [001] axis normal to the substrate surface and the open columnar structure. Large displacement actuators based on such PZT films grown on CNOns/glass substrates should be useful in smart X-ray optics applications.

Influence of Monomer Connectivity, Network Flexibility, and Hydrophobicity on the Hydrothermal Stability of Organosilicas.

It is generally assumed that the hydrothermal stability of organically modified silica networks is promoted by high monomer connectivity, network flexibility, and the presence of hydrophobic groups in the network. In this study a range of organosilica compositions is synthesized to explore the extent to which these factors play a role in the hydrothermal dissolution of these materials. Compositions were synthesized from hexafunctional organically bridged silsesquioxanes (OR1)3Si-R-Si(OR1)3 (R = -CH2-, -C2H4-, -C6H12-, -C8H16-, -p-C6H4-; R1 = -CH3, -C2H5), tetrafunctional (OEt)2Si(CH3)-C2H4-Si(CH3)(OEt)2 and Si(OEt)4, trifunctional silsesquioxanes R'-Si(OMe)3 (R'=CH3, n-C3H7, cyclo-C6H11, phenyl), and bifunctional Si(i-C3H7)2(OMe)2. The bond strain, connectivity and hydroxyl concentration of all networks were estimated using 29Si cross-polarized magic angle spinning nuclear magnetic resonance and Fourier-transform infrared spectroscopy. The hydrophilicity was characterized by monitoring the water uptake of the materials in moisture treatments with thermogravimetric analysis, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The resistance of each network against hydrothermal dissolution in a water/1,5-pentanediol mixture at 80 °C and pH 1, 7, and 13 was analyzed with inductively coupled plasma optical emission spectroscopy and X-ray fluorescence. Bond strain appears to significantly increase the tendency to dissolve under hydrothermal conditions. The stabilizing influences of increased connectivity and hydrophobicity were found to be weak.

Tuning of large piezoelectric response in nanosheet-buffered lead zirconate titanate films on glass substrates.

Renewed interest has been witnessed in utilizing the piezoelectric response of PbZr0.52Ti0.48O3 (PZT) films on glass substrates for applications such as adaptive optics. Accordingly, new methodologies are being explored to grow well-oriented PZT thin films to harvest a large piezoelectric response. However, thin film piezoelectric response is significantly reduced compared to intrinsic response due to substrate induced clamping, even when films are well-oriented. Here, a novel method is presented to grow preferentially (100)-oriented PZT films on glass substrates by utilizing crystalline nanosheets as seed layers. Furthermore, increasing the repetition frequency up to 20 Hz during pulsed laser deposition helps to tune the film microstructure to hierarchically ordered columns that leads to reduced clamping and enhanced piezoelectric response evidenced by transmission electron microscopy and analytical calculations. A large piezoelectric coefficient of 250 pm/V is observed in optimally tuned structure which is more than two times the highest reported piezoelectric response on glass. To confirm that the clamping compromises the piezoelectric response, denser films are deposited using a lower repetition frequency and a BiFeO3 buffer layer resulting in significantly reduced piezoelectric responses. This paper demonstrates a novel method for PZT integration on glass substrates without compromising the large piezoelectric response.

Influence of Solution Properties and Process Parameters on the Formation and Morphology of YSZ and NiO Ceramic Nanofibers by Electrospinning.

The fabrication process of ceramic yttria-stabilized zirconia (YSZ) and nickel oxide nanofibers by electrospinning is reported. The preparation of hollow YSZ nanofibers and aligned nanofiber arrays is also demonstrated. The influence of the process parameters of the electrospinning process, the physicochemical properties of the spinning solutions, and the thermal treatment procedure on spinnability and final microstructure of the ceramic fibers was determined. The fiber diameter can be varied from hundreds of nanometers to more than a micrometer by controlling the solution properties of the electrospinning process, while the grain size and surface roughness of the resulting fibers are mainly controlled via the final thermal annealing process. Although most observed phenomena are in qualitative agreement with previous studies on the electrospinning of polymeric nanofibers, one of the main differences is the high ionic strength of ceramic precursor solutions, which may hamper the spinnability. A strategy to control the effective ionic strength of precursor solutions is also presented.