Vascular Deformation Mapping for CT Surveillance of Thoracic Aortic Aneurysm Growth.

Background Aortic diameter measurements in patients with a thoracic aortic aneurysm (TAA) show wide variation. There is no technique to quantify aortic growth in a three-dimensional (3D) manner. Purpose To validate a CT-based technique for quantification of 3D growth based on deformable registration in patients with TAA. Materials and Methods Patients with ascending and descending TAA with two or more CT angiography studies between 2006 and 2020 were retrospectively identified. The 3D aortic growth was quantified using vascular deformation mapping (VDM), a technique that uses deformable registration to warp a mesh constructed from baseline aortic anatomy. Growth assessments between VDM and clinical CT diameter measurements were compared. Aortic growth was quantified as the ratio of change in surface area at each mesh element (area ratio). Manual segmentations were performed by independent raters to assess interrater reproducibility. Registration error was assessed using manually placed landmarks. Agreement between VDM and clinical diameter measurements was assessed using Pearson correlation and Cohen κ coefficients. Results A total of 38 patients (68 surveillance intervals) were evaluated (mean age, 69 years ± 9 [standard deviation]; 21 women), with TAA involving the ascending aorta (n = 26), descending aorta (n = 10), or both (n = 2). VDM was technically successful in 35 of 38 (92%) patients and 58 of 68 intervals (85%). Median registration error was 0.77 mm (interquartile range, 0.54-1.10 mm). Interrater agreement was high for aortic segmentation (Dice similarity coefficient = 0.97 ± 0.02) and VDM-derived area ratio (bias = 0.0, limits of agreement: -0.03 to 0.03). There was strong agreement (r = 0.85, P < .001) between peak area ratio values and diameter change. VDM detected growth in 14 of 58 (24%) intervals. VDM revealed growth outside the maximally dilated segment in six of 14 (36%) growth intervals, none of which were detected with diameter measurements. Conclusion Vascular deformation mapping provided reliable and comprehensive quantitative assessment of three-dimensional aortic growth and growth patterns in patients with thoracic aortic aneurysms undergoing CT surveillance. Published under a CC BY 4.0 license Online supplemental material is available for this article. See also the editorial by Wieben in this issue.

CRIMSON: An open-source software framework for cardiovascular integrated modelling and simulation.

In this work, we describe the CRIMSON (CardiovasculaR Integrated Modelling and SimulatiON) software environment. CRIMSON provides a powerful, customizable and user-friendly system for performing three-dimensional and reduced-order computational haemodynamics studies via a pipeline which involves: 1) segmenting vascular structures from medical images; 2) constructing analytic arterial and venous geometric models; 3) performing finite element mesh generation; 4) designing, and 5) applying boundary conditions; 6) running incompressible Navier-Stokes simulations of blood flow with fluid-structure interaction capabilities; and 7) post-processing and visualizing the results, including velocity, pressure and wall shear stress fields. A key aim of CRIMSON is to create a software environment that makes powerful computational haemodynamics tools accessible to a wide audience, including clinicians and students, both within our research laboratories and throughout the community. The overall philosophy is to leverage best-in-class open source standards for medical image processing, parallel flow computation, geometric solid modelling, data assimilation, and mesh generation. It is actively used by researchers in Europe, North and South America, Asia, and Australia. It has been applied to numerous clinical problems; we illustrate applications of CRIMSON to real-world problems using examples ranging from pre-operative surgical planning to medical device design optimization.

Critical appraisal of multidimensional CT measurements following acute open repair of type A aortic dissection.

INTRODUCTION: To identify patients with aneurysmal degeneration of the native aorta following type A aortic dissection (TAAD), reproducible serial measurements of aortic dimensions are critical. We used a systematic workflow for measuring aortic geometry following TAAD, using computed tomography angiography data, and test its reproducibility. METHODS: The workflow for aortic measurements included centerline generation, luminal diameter, and area measurement at six anatomically defined locations along the aorta and luminal volumetric measurements in the descending aorta. Two independent observers measured the aortic geometry in 20 surgically repaired TAAD patients, preoperatively and at 3 months follow-up. To test reproducibility, intraobserver and interobserver agreement scores were analyzed using a concordance correlation coefficient (CCC). RESULTS: The interobserver agreement scores of the diameter, area, and volumetric measurements in the descending aorta were acceptable. The agreement scores of the area measurements were highest, with CCCs ranging from 0.909 to 0.984. Luminal diameter measurements scored lower than luminal area measurements and were least reproducible at the mid aortic arch (CCC < 0.886). Overall, intraobserver agreement scores were better than interobserver agreement scores (SD of mean difference was 1.89 vs 1.94 for intraobserver vs interobserver diameter measurements, and 0.61 vs 0.66 for area measurements). CONCLUSION: Although overall reproducibility was acceptable in descending aortic measurements, our results show that it remains challenging to reliably measure luminal diameters, compared with areas. To aid identification of early adverse remodeling following acute TAAD, novel two- and three-dimensional measurement techniques are needed that capture locoregional changes in the false lumen and true lumen morphology more accurately.

Impact of Aortic Tortuosity on Displacement Forces in Descending Thoracic Aortic Aneurysms.

OBJECTIVE: As elastin fibres in the aorta deteriorate with age, the descending thoracic aorta (DTA) becomes longer and more tortuous. In patients with DTA aneurysms, this increased tortuosity may result in a hostile haemodynamic environment for thoracic endovascular aortic repair (TEVAR). The objective of this study was to analyse how increased tortuosity affects haemodynamic displacement forces (DFs) in different segments of the DTA in patients with DTA aneurysms (DTAAs). METHODS: Thirty patients with DTAAs were selected to form three equal groups based on the maximum tortuosity of their DTA: low < 30°, moderate 30°-60°, and high > 60°. Computational fluid dynamics simulations were performed to calculate DFs in all patients. Image based segmentations were carried out to create patient specific models of the aortic geometry. When physiological simulation results were obtained, the haemodynamic DFs on the aortic wall were calculated in four segments of the DTA (zones 4A - D). To enable comparison of DFs in different segments, the DF was normalised by the aortic wall surface area, the equivalent surface traction (EST). RESULTS: The mean age was 73 years, with 67% male. In zone 4C, where most tortuosity occurs, the EST in patients with high tortuosity was more than three times higher, than those with low tortuosity (low, 743 N/m2; moderate, 956 N/m2; high, 2294 N/m2; p = .004). These differences could be attributed to the higher sideways components of the DF vectors, which were more than two times greater in patients with high tortuosity than in patients with low or moderate tortuosity (low, 5.01 N; moderate, 5.50 N; high, 13.21 N; p = .009). CONCLUSION: High tortuosity results in increased displacement forces in the distal segments of the DTA. These forces should be taken into account when planning for TEVAR, as potentially they increase the risk of stent graft related complications, such as migration and endoleak.

Computational analysis of renal artery flow characteristics by modeling aortoplasty and aortic bypass interventions for abdominal aortic coarctation.

OBJECTIVE: Suprarenal abdominal aortic coarctation (SAAC) alters flow and pressure patterns to the kidneys and is often associated with severe angiotensin-mediated hypertension refractory to drug therapy. SAAC is most often treated by a thoracoabdominal bypass (TAB) or patch aortoplasty (PA). It is currently unclear what effect these interventions have on renal flow and pressure waveforms. This study, using retrospective data from a patient with SAAC subjected to a TAB, undertook computational modeling to analyze aortorenal blood flow preoperatively as well as postoperatively after a variety of TAB and PA interventions. METHODS: Patient-specific anatomic models were constructed from preoperative computed tomography angiograms of a 9-year-old child with an isolated SAAC. Fluid-structure interaction (FSI) simulations of hemodynamics were performed to analyze preoperative renal flow and pressure waveforms. A parametric study was then performed to examine the hemodynamic impact of different bypass diameters and patch oversizing. RESULTS: Preoperative FSI results documented diastole-dominated renal perfusion with considerable high-frequency disturbances in blood flow and pressure. The postoperative TAB right and left kidney volumes increased by 58% and 79%, respectively, reflecting the increased renal artery blood flows calculated by the FSI analysis. Postoperative increases in systolic flow accompanied decreases in high-frequency disturbances, aortic pressure, and collateral flow after all surgical interventions. In general, lesser degrees of high-frequency disturbances followed PA interventions. High-frequency disturbances were eliminated with the 0% PA in contrast to the 30% and 50% PA oversizing and TAB interventions, in which these flow disturbances remained. CONCLUSIONS: Both TAB and PA dramatically improved renal artery flow and pressure waveforms, although disturbed renal waveforms remained in many of the surgical scenarios. Importantly, only the 0% PA oversizing scenario eliminated all high-frequency disturbances, resulting in nearly normal aortorenal blood flow. The study also establishes the relevance of patient-specific computational modeling in planning interventions for the midaortic syndrome.

Ascending aortic rupture after zone 2 endovascular repair: a multiparametric computational analysis.

A 74-year-old woman expired from ascending aortic rupture 3 months following branched zone 2 endovascular aortic repair. Multiparametric image-based computational evaluation of this case suggested that the stiffness mismatch between the endograft and the native aorta increased haemodynamic loads and likely led to the rupture of the ascending aorta. This under-recognized phenomenon should be considered in preoperative planning and presents suggestions for endograft development.

Cardiac remodelling following thoracic endovascular aortic repair for descending aortic aneurysms.

OBJECTIVES: Current endografts for thoracic endovascular aortic repair (TEVAR) are much stiffer than the aorta and have been shown to induce acute stiffening. In this study, we aimed to estimate the impact of TEVAR on left ventricular (LV) stroke work (SW) and mass using a non-invasive image-based workflow. METHODS: The University of Michigan database was searched for patients treated with TEVAR for descending aortic pathologies (2013-2016). Patients with available pre-TEVAR and post-TEVAR computed tomography angiography and echocardiography data were selected. LV SW was estimated via patient-specific fluid-structure interaction analyses. LV remodelling was quantified through morphological measurements using echocardiography and electrocardiographic-gated computed tomography angiography data. RESULTS: Eight subjects were included in this study, the mean age of the patients was 68 (73, 25) years, and 6 patients were women. All patients were prescribed antihypertensive drugs following TEVAR. The fluid-structure interaction simulations computed a 26% increase in LV SW post-TEVAR [0.94 (0.89, 0.34) J to 1.18 (1.11, 0.65) J, P = 0.012]. Morphological measurements revealed an increase in the LV mass index post-TEVAR of +26% in echocardiography [72 (73, 17) g/m2 to 91 (87, 26) g/m2, P = 0.017] and +15% in computed tomography angiography [52 (46, 29) g/m2 to 60 (57, 22) g/m2, P = 0.043]. The post- to pre-TEVAR LV mass index ratio was positively correlated with the post- to pre-TEVAR ratios of SW and the mean blood pressure (ρ = 0.690, P = 0.058 and ρ = 0.786, P = 0.021, respectively). CONCLUSIONS: TEVAR was associated with increased LV SW and mass during follow-up. Medical device manufacturers should develop more compliant devices to reduce the stiffness mismatch with the aorta. Additionally, intensive antihypertensive management is needed to control blood pressure post-TEVAR.

Correction: Changes in aortic pulse wave velocity of four thoracic aortic stent grafts in an ex vivo porcine model.

[This corrects the article DOI: 10.1371/journal.pone.0186080.].

Patient-Specific Modeling of Hemodynamics: Supporting Surgical Planning in a Fontan Circulation Correction.

Computational fluid dynamics (CFD) is a modeling technique that enables calculation of the behavior of fluid flows in complex geometries. In cardiovascular medicine, CFD methods are being used to calculate patient-specific hemodynamics for a variety of applications, such as disease research, noninvasive diagnostics, medical device evaluation, and surgical planning. This paper provides a concise overview of the methods to perform patient-specific computational analyses using clinical data, followed by a case study where CFD-supported surgical planning is presented in a patient with Fontan circulation complicated by unilateral pulmonary arteriovenous malformations. In closing, the challenges for implementation and adoption of CFD modeling in clinical practice are discussed.

Changes in aortic pulse wave velocity of four thoracic aortic stent grafts in an ex vivo porcine model.

OBJECTIVES: Thoracic endovascular aortic repair (TEVAR) has been shown to lead to increased aortic stiffness. The aim of this study was to investigate the effect of stent graft type and stent graft length on aortic stiffness in a controlled, experimental setting. METHODS: Twenty porcine thoracic aortas were connected to a pulsatile mock loop system. Intraluminal pressure was recorded at two sites in order to measure pulse wave velocity (PWV) for each aorta: before stent graft deployment (t1); after deployment of a 100-mm long stent graft (t2); and after distal extension through deployment of a second 100-mm long stent graft (t3). Four different types of stent grafts (Conformable Gore® TAG® Device, Bolton Relay® Device, Cook Zenith Alpha™, and Medtronic Valiant®) were evaluated. RESULTS: For the total cohort of 20 aortas, PWV increased by a mean 0.6 m/s or 8.9% of baseline PWV after deployment of a 100-mm proximal stent graft (P<0.001), and by a mean 1.4 m/s or 23.0% of baseline PWV after distal extension of the stent graft (P<0.001). Univariable regression analysis showed a significant correlation between aortic PWV and extent of stent graft coverage, (P<0.001), but no significant effect of baseline aortic length, baseline aortic PWV, or stent graft type on the percentual increase in PWV at t2 or at t3. CONCLUSIONS: In this experimental set-up, aortic stiffness increased significantly after stent graft deployment with each of the four types of stent graft, with the increase in aortic stiffness depending on the extent of stent graft coverage.

Reliability, validity, and responsiveness of the Western Ontario and McMaster Universities Osteoarthritis Index for elderly patients with a femoral neck fracture.

BACKGROUND: The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) has been extensively evaluated in groups of patients with osteoarthritis, yet not in patients with a femoral neck fracture. This study aimed to determine the reliability, construct validity, and responsiveness of the WOMAC compared with the Short Form-12 (SF-12) and the EuroQol 5D (EQ-5D) questionnaires for the assessment of elderly patients with a femoral neck fracture. METHODS: Reliability was tested by assessing the Cronbach alpha. Construct validity was determined with the Pearson correlation coefficient. Change scores were calculated from ten weeks to twelve months of follow-up. Standardized response means and floor and ceiling effects were determined. Analyses were performed to compare the results for patients less than eighty years old with those for patients eighty years of age or older. RESULTS: The mean WOMAC total score was 89 points before the fracture in the younger patients and increased from 70 points at ten weeks to 81 points at two years postoperatively. In the older age group, these scores were 86, 75, and 78 points. The mean WOMAC pain scores before the fracture and at ten weeks and two years postoperatively were 92, 76, and 87 points, respectively, in the younger age group and 92, 84, and 93 points in the older age group. Function scores were 89, 68, and 79 points for the younger age group and 84, 71, and 73 points for the older age group. The Cronbach alpha for pain, stiffness, function, and the total scale ranged from 0.83 to 0.98 for the younger age group and from 0.79 to 0.97 for the older age group. Construct validity was good, with 82% and 79% of predefined hypotheses confirmed in the younger and older age groups, respectively. Responsiveness was moderate. No floor effects were found. Moderate to large ceiling effects were found for pain and stiffness scales at ten weeks and twelve months in younger patients (18% to 36%) and in the older age group (38% to 53%). CONCLUSIONS: The WOMAC showed good reliability, construct validity, and responsiveness in both age groups of elderly patients with a femoral neck fracture who had been physically and mentally fit before the fracture. The instrument is suitable for use in future clinical studies in these populations. CLINICAL RELEVANCE: The results are based on two clinical trials. The questionnaires used concern pure, clinically relevant issues (ability to walk, climb stairs, etc.). Moreover, the results can be used for future research comparing clinical outcomes (or treatments) for populations with a femoral neck fracture.