Molecular Junctions for Terahertz Switches and Detectors.

Molecular electronics targets tiny devices exploiting the electronic properties of the molecular orbitals, which can be tailored and controlled by the chemical structure and configuration of the molecules. Many functional devices have been experimentally demonstrated; however, these devices were operated in the low-frequency domain (mainly dc to MHz). This represents a serious limitation for electronic applications, although molecular devices working in the THz regime have been theoretically predicted. Here, we experimentally demonstrate molecular THz switches at room temperature. The devices consist of self-assembled monolayers of molecules bearing two conjugated moieties coupled through a nonconjugated linker. These devices exhibit clear negative differential conductance behaviors (peaks in the current-voltage curves), as confirmed by ab initio simulations, which were reversibly suppressed under illumination with a 30 THz wave. We analyze how the THz switching behavior depends on the THz wave properties (power and frequency), and we benchmark that these molecular devices would outperform actual THz detectors.

Terphenylthiazole-based self-assembled monolayers on cobalt with high conductance photo-switching ratio for spintronics.

Two new photo-switchable terphenylthiazole molecules are synthesized and self-assembled as monolayers on Au and on ferromagnetic Co electrodes. The electron transport properties probed by conductive atomic force microscopy in ultra-high vacuum reveal a larger conductance of the light-induced closed (c) form than for the open (o) form. We report an unprecedented conductance ratio of up to 380 between the closed and open forms on Co for the molecule with the anchoring group (thiol) on the side of the two N atoms of the thiazole unit. This result is rationalized by Density Functional Theory (DFT) calculations coupled to the Non-Equilibrium Green's function (NEGF) formalism. These calculations show that the high conductance in the closed form is due to a strong electronic coupling between the terphenylthiazole molecules and the Co electrode that manifests by a resonant transmission peak at the Fermi energy of the Co electrode with a large broadening. This behavior is not observed for the same molecules self-assembled on gold electrodes. These high conductance ratios make these Co-based molecular junctions attractive candidates to develop and study switchable molecular spintronic devices.

Challenges for Incorporating Optical Switchability in Organic-Based Electronic Devices.

Transistors operate by controlling the current flowing from a source to a drain electrode via a third electrode (gate), thus giving access to a binary treatment (ON/OFF or 0/1) of the signal currently exploited in microelectronics. Introducing a second independent lever to modulate the current would allow for more complex logic functions amenable to a single electronic component and hence to new opportunities for advanced electrical signal processing. One avenue is to add this second dimension with light by incorporating photochromic molecules in current organic-based electronic devices. In this Spotlight, we describe different concepts that have been implemented in organic thin films and in molecular junctions as well as some pitfalls that have been highlighted thanks to theoretical modeling.

Conductance switching of azobenzene-based self-assembled monolayers on cobalt probed by UHV conductive-AFM.

We report the formation of self-assembled monolayers of a molecular photoswitch (azobenzene-bithiophene derivative, AzBT) on cobalt via a thiol covalent bond. We study the electrical properties of the molecular junctions formed with the tip of a conductive atomic force microscope under ultra-high vacuum. The statistical analysis of the current-voltage curves shows two distinct states of the molecule conductance, suggesting the coexistence of both the trans and cis azobenzene isomers on the surface. The cis isomer population (trans isomer) increases (decreases) upon UV light irradiation. The situation is reversed under blue light irradiation. The experiments are confronted to first-principle calculations performed on the molecular junctions with the Non-Equilibrium Green's Function formalism combined with Density Functional Theory (NEGF/DFT). The theoretical results consider two different molecular orientations for each isomer. Whereas the orientation does not affect the conductance of the trans isomer, it significantly modulates the conductance of the cis isomer and the resulting conductance ON/OFF ratio of the molecular junction. This helps identifying the molecular orientation at the origin of the observed current differences between the trans and cis forms. The ON state is associated to the trans isomer irrespective of its orientation in the junction, while the OFF state is identified as a cis isomer with its azobenzene moiety folded upward with respect to the bithiophene core. The experimental and calculated ON/OFF conductance ratios have a similar order of magnitude. This conductance ratio seems reasonable to make these Co-AzBT molecular junctions a good test-bed to further explore the relationship between the spin-polarized charge transport, the molecule conformation and the molecule-Co spinterface.

On the reliability of acquiring molecular junction parameters by Lorentzian fitting of I/V curves.

Fitting the I/V curves of molecular junctions by simple analytical models is often done to extract relevant molecular parameters such as energy level alignment or interfacial electronic coupling to build up useful property-relationships. However, such models can suffer from severe limitations and hence provide unreliable molecular parameters. This is illustrated here by extracting key molecular parameters by fitting computed voltage-dependent transmission spectra and by comparing them to the values obtained by fitting the calculated I/V curves with a typical Lorentzian model used in the literature. Doing so, we observe a large discrepancy between the two sets of values which warns us about the risks of using simple fitting expressions. Interestingly, we demonstrate that the quality of the fit can be improved by imposing the low bias conductance and Seebeck coefficient of the junction to be recovered in the fitting procedure.

Reply to the 'Comment on "Extent of conjugation in diazonium-derived layers in molecular junction devices determined by experiment and modelling"' by R. L. McCreery, S. K. Saxena, M. Supur and U. Tefashe, Phys. Chem. Chem. Phys., 2020, 22, DOI: 10.1039/d0cp02412k.

Our paper [Phys. Chem. Chem. Phys., 2019, 21, 16762] is the subject of a comment that clarifies a flaw in analysis of STM data. We accept the comment in regard to the aspect ratio considerations, but we also further clarify the main conclusions of our paper, and provide a molecular scale schematic using the data presented in the comment to help refine the original conclusions. Taken together, this shows that models presented in the literature may benefit from including more fine structure details, as better understanding may emerge from such considerations. This was the intent of our original article, and we thank the comment authors for the chance to clarify these points.

Quantum Interference Enhanced Chemical Responsivity in Single-Molecule Dithienoborepin Junctions.

Providing a chemical control over charge transport through molecular junctions is vital to developing sensing applications at the single-molecule scale. Quantum-interference effects that affect the charge transport through molecules offer a unique chance to enhance the chemical control. Here, we investigate how interference effects can be harnessed to optimize the response of single molecule dithienoborepin (DTB) junctions to the specific coordination of a fluoride ion in solution. The single-molecule conductance of two DTB isomers is measured using scanning tunneling microscopy break-junction (STM-BJ) before and after fluoride ion exposure. We find a significant change of conductance before and after the capture of a fluoride ion, the magnitude of which depends on the position of the boron atom in the molecular structure. This single-molecule sensor exhibits switching ratios of up to four orders of magnitudes, suggesting that the boron-fluoride coordination can lead to quantum-interference effects. This is confirmed by a quantum chemical characterization, pointing toward a cross-conjugated path through the molecular structure as the origin of the effect.

Extent of conjugation in diazonium-derived layers in molecular junction devices determined by experiment and modelling.

This paper shows that molecular layers grown using diazonium chemistry on carbon surfaces have properties indicative of the presence of a variety of structural motifs. Molecular layers grown with aromatic monomers with thickness between 1 and ∼15 nm display optical absorption spectra with significant broadening but no change in band gap or onsets of absorption as a function of layer thickness. This suggests that there is no extended conjugation in these layers, contrary to the conclusions of previous work. Density-functional theory modelling of the non-conjugated versions of the constituent aromatic monomers reveals that the experimental trends in optical spectra can be recovered, thereby establishing limits to the degree of conjugation and the nature of the order of as-grown molecular layers. We conclude that the absence of both shifts in band gap and changes in absorption onset is a consequence of resonant conjugation within the layers being less than 1.5 monomer units, and that film disorder is the main origin of the optical spectra. These findings have important implications for understanding charge transport mechanisms in molecular junction devices, as the layers cannot be expected to behave as ideal, resonantly conjugated films, but should be viewed as a collection of mixed nonresonantly- and resonantly-conjugated monomers.

Bottom-up, Robust Graphene Ribbon Electronics in All-Carbon Molecular Junctions.

Large-area molecular electronic junctions consisting of 5-carbon wide graphene ribbons (GR) with lengths of 2-12 nm between carbon electrodes were fabricated by electrochemical reduction of diazotized 1,8-diaminonaphthalene. Their conductance greatly exceeds that observed for other molecular junctions of similar thicknesses, by a factor of >1 × 104 compared to polyphenylenes and >1 × 107 compared to alkane chains. The remarkable increase of conductance of the GR nanolayer results from (i) uninterrupted planarity of fused-arene structure affording extensive π-electron delocalization and (ii) enhanced electronic coupling of molecular layer with the carbon bottom contact by two-point covalent bonding, in agreement with DFT-based simulations.

Chain Length Dependence of the Dielectric Constant and Polarizability in Conjugated Organic Thin Films.

Dielectric materials are ubiquitous in optics, electronics, and materials science. Recently, there have been new efforts to characterize the dielectric performance of thin films composed of molecular assemblies. In this context, we investigate here the relationship between the polarizability of the constituent molecules and the film dielectric constant, using periodic density functional theory (DFT) calculations, for polyyne and saturated alkane chains. In particular, we explore the implication of the superlinear chain length dependence of the polarizability, a specific feature of conjugated molecules. We show and explain from DFT calculations and a simple depolarization model that this superlinearity is attenuated by the collective polarization. However, it is not completely suppressed. This confers a very high sensitivity of the dielectric constant to the thin film thickness. This latter can increase by a factor of 3-4 at reasonable coverages, by extending the molecular length. This significantly limits the decline of the thin film capacitance with the film thickness. Therefore, the conventional fit of the capacitance versus thickness is not appropriate to determine the dielectric constant of the film. Finally, we show that the failures of semilocal approximations of the exchange-correlation functional lead to a very significant overestimation of this effect.

Harnessing Quantum Interference in Molecular Dielectric Materials.

We investigate the relationship between dielectric response and charge transport in molecule-based materials operating in the quantum coherent regime. We find that quantum interference affects these observables differently, for instance, allowing current passing through certain materials to be reduced by orders of magnitude without affecting dielectric behavior (or band gap). As an example, we utilize ab initio electronic structure theory to calculate conductance and dielectric constants of cross-conjugated anthraquinone (AQ)-based and linearly conjugated anthracene (AC)-based materials. In spite of having nearly equal fundamental gaps, electrode bonding configurations, and molecular dimensions, we find a ∼1.7 order of magnitude (∼50-fold) reduction in the conductance of the AQ-based material relative to the AC-based material, a value in close agreement with recent measurements, while the calculated dielectric constants of both materials are nearly identical. From these findings, we propose two molecular materials in which quantum interference is used to reduce leakage currents across a ∼25 Šmonolayer gap with dielectric constants larger than 4.5.

Molecular rectifiers: a new design based on asymmetric anchoring moieties.

The quest for a molecular rectifier is among the major challenges of molecular electronics. We introduce three simple rules to design an efficient rectifying molecule and demonstrate its functioning at the theoretical level, relying on the NEGF-DFT technique. The design rules notably require both the introduction of asymmetric anchoring moieties and a decoupling bridge. They lead to a new rectification mechanism based on the compression and control of the HOMO/LUMO gap by the electrode Fermi levels, arising from a pinning effect. Significant rectification ratios up to 2 orders of magnitude are theoretically predicted as the mechanism opposes resonant to nonresonant tunneling.

Impact of derivatization on electron transmission through dithienylethene-based photoswitches in molecular junctions.

We report a combined Non-Equilibrium Green's Function - Density Functional Theory study of molecular junctions made of photochromic diarylethenes between gold electrodes. The impact of derivatization of the molecule on the transmission spectrum is assessed by introducing: (i) substituents on the diarylethene core; and (ii) linker substituents between the gold surface and the diarylethene. We illustrate that substituents on the core shift considerably the HOMO/LUMO level energies in gas phase but do not change the I-V characteristics of the molecular junctions; this behaviour has been rationalized by establishing links between the transmission spectrum and interfacial electronic reorganization upon chemisorption. In contrast, the different linker substituents under study modulate the conductivity of the junction by changing the degree of orbital hybridization with the metallic electrodes and the degree of orbital polarization.

Large work function shift of gold induced by a novel perfluorinated azobenzene-based self-assembled monolayer.

Tune it with light! Self-assembled monolayers on gold based on a chemisorbed novel azobenzene derivative with a perfluorinated terminal phenyl ring are prepared. The modified substrate shows a significant work function increase compared to the bare metal. The photo-conversion between trans and cis isomers chemisorbed on the surface shows great perspectives for being an accessible route to tune the gold properties by means of light.