Universal scaling of the charge transport in large-area molecular junctions.

Charge transport through alkanes and para-phenylene oligomers is investigated in large-area molecular junctions. The molecules are self-assembled in a monolayer and contacted with a top electrode consisting of poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonic acid) (PEDOT:PSS). The complete set of J(V,T) characteristics of both saturated and π-conjugated molecules can be described quantitatively by a single equation with only two fit parameters. The derived parameters, in combination with a variation of the bulk conductivity of PEDOT:PSS, demonstrate that the absolute junction resistance is factorized with that of PEDOT:PSS.

Formation of high-quality self-assembled monolayers of conjugated dithiols on gold: base matters.

This Article reports a systematic study on the formation of self-assembled monolayers (SAMs) of conjugated molecules for molecular electronic (ME) devices. We monitored the deprotection reaction of acetyl protected dithiols of oligophenylene ethynylenes (OPEs) in solution using two different bases and studied the quality of the resulting SAMs on gold. We found that the optimal conditions to reproducibly form dense, high-quality monolayers are 9-15% triethylamine (Et(3)N) in THF. The deprotection base tetrabutylammonium hydroxide (Bu(4)NOH) leads to less dense SAMs and the incorporation of Bu(4)N into the monolayer. Furthermore, our results show the importance of the equilibrium concentrations of (di)thiolate in solution on the quality of the SAM. To demonstrate the relevance of these results for molecular electronics applications, large-area molecular junctions were fabricated using no base, Et(3)N, and Bu(4)NOH. The magnitude of the current-densities in these devices is highly dependent on the base. A value of ß=0.15 Å(-1) for the exponential decay of the current-density of OPEs of varying length formed using Et(3)N was obtained.

Ordered semiconducting self-assembled monolayers on polymeric surfaces utilized in organic integrated circuits.

We report on a two-dimensional highly ordered self-assembled monolayer (SAM) directly grown on a bare polymer surface. Semiconducting SAMs are utilized in field-effect transistors and combined into integrated circuits as 4-bit code generators. The driving force to form highly ordered SAMs is packing of the liquid crystalline molecules caused by the interactions between the linear alkane moieties and the pi-pi stacking of the conjugated thiophene units. The fully functional circuits demonstrate long-range order over large areas, which can be regarded as the start of flexible monolayer electronics.

Monolayer coverage and channel length set the mobility in self-assembled monolayer field-effect transistors.

The mobility of self-assembled monolayer field-effect transistors (SAMFETs) traditionally decreases dramatically with increasing channel length. Recently, however, SAMFETs using liquid-crystalline molecules have been shown to have bulk-like mobilities that are virtually independent of channel length. Here, we reconcile these scaling relations by showing that the mobility in liquid crystalline SAMFETs depends exponentially on the channel length only when the monolayer is incomplete. We explain this dependence both numerically and analytically, and show that charge transport is not affected by carrier injection, grain boundaries or conducting island size. At partial coverage, that is when the monolayer is incomplete, liquid-crystalline SAMFETs thus form a unique model system to study size-dependent conductance originating from charge percolation in two dimensions.

Upscaling, integration and electrical characterization of molecular junctions.

The ultimate target of molecular electronics is to combine different types of functional molecules into integrated circuits, preferably through an autonomous self-assembly process. Charge transport through self-assembled monolayers has been investigated previously, but problems remain with reliability, stability and yield, preventing further progress in the integration of discrete molecular junctions. Here we present a technology to simultaneously fabricate over 20,000 molecular junctions-each consisting of a gold bottom electrode, a self-assembled alkanethiol monolayer, a conducting polymer layer and a gold top electrode-on a single 150-mm wafer. Their integration is demonstrated in strings where up to 200 junctions are connected in series with a yield of unity. The statistical analysis on these molecular junctions, for which the processing parameters were varied and the influence on the junction resistance was measured, allows for the tentative interpretation that the perpendicular electrical transport through these monolayer junctions is factorized.

Self-assembled-monolayer formation of long alkanedithiols in molecular junctions.

The orientation of alkanedithiol molecules in self-assembled monolayers (SAMs) is of vital importance for their transport properties in molecular junctions. It is demonstrated that a too-low concentration of long alkanedithiols in ethanol leads to the formation of looped molecules, resulting in a 50-fold increase of the current through the SAM. X-ray photoelectron spectroscopy measurements show that high-concentration dithiol solutions result in a preferential standing-up phase. To obtain an almost full standing-up phase of 1,14-tetradecanedithiol (C14) a 30 mM concentration in ethanol is required, whereas a 0.3 mM concentration leads to a highly looped monolayer. The conduction through the full standing-up phase of C14 and C16 is in accordance with the exponential dependence on molecule length as obtained from shorter alkanedithiols.

Manipulating the Local Light Emission in Organic Light-Emitting Diodes by using Patterned Self-Assembled Monolayers.

Patterned organic light-emitting diodes are fabricated by using microcontact- printed self-assembled monolayers on a gold anode (see background figure). Molecules with dipole moments in opposite directions result in an increase or a decrease of the local work function (foreground picture), providing a direct handle on charge injection and enabling local modification of the light emission.

Electron tunneling through alkanedithiol self-assembled monolayers in large-area molecular junctions.

The electrical transport through self-assembled monolayers of alkanedithiols was studied in large-area molecular junctions and described by the Simmons model [Simmons JG (1963) J Appl Phys 34:1793-1803 and 2581-2590] for tunneling through a practical barrier, i.e., a rectangular barrier with the image potential included. The strength of the image potential depends on the value of the dielectric constant. A value of 2.1 was determined from impedance measurements. The large and well defined areas of these molecular junctions allow for a simultaneous study of the capacitance and the tunneling current under operational conditions. Electrical transport for octanedithiol through tetradecanedithiol self-assembled monolayers up to 1 V can simultaneously be described by a single effective mass and a barrier height. There is no need for additional fit constants. The barrier heights are in the order of 4-5 eV and vary systematically with the length of the molecules. Irrespective of the length of the molecules, an effective mass of 0.28 was determined, which is in excellent agreement with theoretical predictions.

Donor-acceptor polymers: a conjugated oligo(p-phenylene vinylene) main chain with dangling perylene bisimides.

Two new donor-acceptor copolymers that consist of an enantiomerically pure oligo(p-phenylene vinylene) main chain with dangling perylene bisimides have been synthesized by using a Suzuki cross-coupling polymerization. Absorption and circular dichroism spectroscopy revealed that the transition dipole moments of the donor in the main chain and the dangling acceptor moieties of the copolymers are coupled and in a helical orientation in solution, even at elevated temperatures. A strong fluorescence quenching of both chromophores indicates an efficient photoinduced charge transfer after photoexcitation of either donor or acceptor. The formation and recombination kinetics of the charge-separated state were investigated in detail with femtosecond and near-steady-state photoinduced absorption spectroscopy. The charge-separated state forms within 1 ps after excitation, and recombination occurs with a time constant of 45-60 ps, both in solution and in the solid state. These optical characteristics indicate a short distance and appreciable interaction between the electron-rich donor chain and the dangling electron-poor acceptor chromophores.

Alternating oligo(p-phenylene vinylene)--perylene bisimide copolymers: synthesis, photophysics, and photovoltaic properties of a new class of donor--acceptor materials.

A Suzuki polycondensation reaction has been used to synthesize two copolymers consisting of alternating oligo(p-phenylene vinylene) (OPV) donor and perylene bisimide (PERY) acceptor chromophores. The copolymers differ by the length of the saturated spacer that connects the OPV and PERY units. Photoinduced singlet energy transfer and photoinduced charge separation in these polychromophores have been studied in solution and in the solid state via photoluminescence and femtosecond pump-probe spectroscopy. In both polymers a photoinduced electron transfer occurs within a few picoseconds after excitation of the OPV or the PERY chromophore. The electron transfer from OPV excited state competes with a singlet energy transfer state to the PERY chromophore. The differences in rate constants for the electron- and energy-transfer processes are discussed on the basis of correlated quantum-chemical calculations and in terms of conformational preferences and folding of the two polymers. In solution, the lifetime of the charge-separated state is longer than in the films where geminate recombination is much faster. However, in the films some charges are able to escape from geminate recombination and diffuse away and can be collected at the electrodes when the polymers are incorporated in a photovoltaic device.

Preferential hetero-dimer formation and equilibrium dynamics of self-complementary bifunctional oligo(p-phenylenevinylene) and C60 ureido-pyrimidinone derivatives in solution.

The formation of hetero-dimers of bifunctional oligo(p-phenylenevinylene) and C60 ureido-pyrimidinone derivatives has been observed by 1H-NMR and fluorescence techniques.

Photoinduced electron transfer in a mesogenic donor-acceptor-donor system.

A novel donor-acceptor-donor molecule consisting of two oligo(p-phenylene vinylene) (OPV4) units attached to a central perylene bisimide (PERY) core is described. This OPV4-PERY-OPV4 is the first mesogenic molecule that incorporates both p- and n-type semiconducting properties and possesses a liquid-crystalline mesophase, in which donor and acceptor functionalities self-assemble into an ordered material. Upon photoexcitation of the donor, a subpicosecond electron-transfer reaction occurs in OPV4-PERY-OPV4, both in solution and in (ordered) thin solid films. The lifetime of the charge-separated state is significantly longer in (ordered) thin films than in solution as a result of a reduction of geminate recombination by migration and spatial separation of charges in the film.

Orientational effect on the photophysical properties of quaterthiophene-C60 dyads.

Two quaterthiophene-[60]fullerene dyads in which C60 is singly (4TsC) or doubly (4TdC) connected to the inner beta-position of the terminal thiophene rings have been synthesized. The electronic properties of these donor-acceptor compounds were analyzed by UV/Vis spectroscopy and cyclic voltammetry, and their photophysical properties in solution and in the solid state by (time-resolved) photoluminescence (PL) and photoinduced absorption (PIA) spectroscopy. Both the flexible and geometrically constrained 4TsC and 4TdC dyads exhibit photoinduced charge transfer from the quaterthiophene to the fullerene in toluene and o-dichlorobenzene (ODCB). In toluene, charge transfer occurs in both dyads by an indirect mechanism, the first step of which is a singlet-energy transfer from the 4T(S1) state to the C60(S1) state. In the more polar ODCB, direct electron transfer from 4T(S1) competes with energy transfer, and both direct and indirect charge transfers are observed. The geometrical fixation of the donor and acceptor chromophores in 4TdC results in rate constants for energy and electron transfer that are more than an order of magnitude larger than those of the flexible 4TsC system. For both dyads, charge recombination is extremely fast, as inferred from picosecond-resolved temporal evolution of the excited state absorption of the 4T.+ radical cation both in toluene and ODCB.