Replacing the Z-phenyl Ring in Tamoxifen® with a para-Connected NCN Pincer-Pt-Cl Grouping by Post-Modification †.

Post-modification of a series of NCN-pincer platinum(II) complexes [PtX(NCN-R-4)] (NCN = [C6H2(CH2NMe2)2-2,6]-, R = C(O)H, C(O)Me and C(O)Et), X = Cl- or Br-) at the para-position using the McMurry reaction was studied. The synthetic route towards two new [PtCl(NCN-R-4)] (R = C(O)Me and C(O)Et) complexes used above is likewise described. The utility and limitations of the McMurry reaction involving these pincer complexes was systematically evaluated. The predicted "homo-coupling" reaction of [PtBr(NCN-C(O)H-4)] led to the unexpected formation of 3,3',5,5'-tetra[(dimethylamino)methyl]-4,4'-bis(platinum halide)-benzophenone (halide = Br or Cl), referred to hereafter as the bispincer-benzophenone complex 13. This material was further characterized using X-ray crystal structure determination. The applicability of the pincer complexes in the McMurry reaction is shown to open a route towards the synthesis of tamoxifen-type derivatives of which one phenyl ring of Tamoxifen® itself is replaced by an NCN arylplatinum pincer fragment. The newly synthesized derivatives can be used as potential candidates in anti-cancer drug screening protocols. Two NCN-arylpincer platinum tamoxifen type derivatives, 5 and 6, were successfully synthesized and of 5 the separation of the diastereomeric E-/Z-forms was achieved. Compound 6, which is the pivaloyl protected NCN pincer platinum hydroxy-Tamoxifen® derivative, was obtained as a mixture of E-/Z-isomers. The new derivatives were further analyzed and characterized with 1H-, 13C{1H}- and 195Pt{1H}-NMR, IR, exact mass MS and elemental analysis.

Auto-Crosslinked Rigid Foams Derived from Biorefinery Byproducts.

A new macroporous foam-like material is presented based on autocross-linking humins, an industrial biorefinery byproduct. Humins foams are obtained by a simple heating process, without any pretreatment and with high control of morphology, porosity, and carbon content. Untreated humins have been characterized by GC, ultra-performance liquid chromatography (UPLC), elemental analysis, and FTIR, whereas the mechanism of foaming was elucidated by a combination of thermal and rheological analyses. A preliminary screening of conditions was conducted to identify the parameters controlling this foaming process. A foam was produced in a controlled way with open and/or closed cells with cell diameters between 0.2 and 3.5 mm. Humins foams were characterized by Raman spectroscopy, FTIR, SEM, nitrogen adsorption, pycnometry, and mechanical tests. The results show that, based on humins, it is possible to obtain porous materials with controlled architectures and a range of parameters that can be tailored, depending on the foreseen applications.

Organometallic benzylidene anilines: donor-acceptor features in NCN-pincer Pt(ii) complexes with a 4-(E)-[(4-R-phenyl)imino]methyl substituent.

A series of organometallic 4,4'-substituted benzylidene aniline complexes 4-ClPt-3,5-(CH2NMe2)2C6H2CH[double bond, length as m-dash]NC6H4R'-4', abbreviated as PtCl[NCN(CH[double bond, length as m-dash]NC6H4R'-4')-4], with R' = NMe2, Me, H, Cl, CN (, respectively), was synthesized via a Schiff-base condensation reaction involving reaction of PtCl[NCN(CH[double bond, length as m-dash]O)-4] () with the appropriate 4-R'-substituted aniline derivative () in toluene. The resulting arylplatinum(ii) products were obtained in 75-88% yield. Notably, product was also obtained in 68% yield from a reaction in the solid state by grinding solid with aniline . The structures of , , and in the solid state (single crystal X-ray diffraction) showed a non-planar geometry, in particular for compound . The electronic interaction between the donor benzylidene fragment PtCl(NCN-CH) and the para-R' aniline substituent through the azomethine bridge was studied with NMR and UV/Vis spectroscopy. Linear correlations were found between the azomethine (1)H, the (195)Pt NMR and various (13)C NMR chemical shifts, and the substituent parameters σF and σR of R' at the aniline site. In common with organic benzylidene anilines, the azomethine (1)H NMR chemical shift showed anomalous substituent behavior. The (195)Pt NMR chemical shift of the platinum center can be used as a probe for the electronic properties of the delocalized π-system of the benzylidene aniline framework, to which it is connected. The dual substituent parameter treatment of the azomethine (13)C NMR shift gave important insight into the unique behaviour of the Pt-pincer group as a substituent. Inductively, it is a very strong electron-withdrawing group, whereas mesomerically it behaves like a very strong electron donating group.

Mono N,C,N-pincer complexes of titanium, vanadium and niobium. Synthesis, structure and catalytic activity in olefin polymerisation.

Transmetallation of 4,4'-bis{(2,6-bis[(dimethylamino)methyl]phenylgold)diphenyl-phosphino}biphenyl (3) with MCl(4) (M = Ti, NbCl, V) in benzene gave the corresponding transition metal pincer complexes (4) and insoluble 4,4'-bis[P-(chloro gold(I))diphenylphosphino]biphenyl (2), which can be quantitatively recovered and recycled. Interestingly, 3 did not react with TiCl(3). However, reaction of 2,6-bis[(dimethylamino)methyl]phenyllithium (1) with TiCl(3) resulted in formation of the novel diaryltitanium(IV) compound 5 (16% yield), comprising one N,C,N-mer bound NCN-pincer ligand and a second NCN-pincer ligand that is rearranged from a 1,2,6-isomer to a 1,2,4 one. The latter NCN-ligand is dianionic and is bidentate bonded; one of the CH(2)NMe(2) substituents (para to C'(ipso)) is non-coordinated, while the second CH(2)NMe(2) group, after C-H activation of one of the Me groups, is η(2)-C,N-bonded to the titanium centre trans to C(ipso) of the mer-NCN ligand. The new NCN-pincer metal complexes 2,6-bis[(dimethylamino)methyl]phenylTiCl(3) (4a) and 2,6-bis[(dimethylamino)methyl]-phenylVCl(2) (4d) gave, after immobilization on MgCl(2)-based supports, very high activity in ethene polymerisation.

The mechanism of the modified Ullmann reaction.

The copper-mediated aromatic nucleophilic substitution reactions developed by Fritz Ullmann and Irma Goldberg required stoichiometric amounts of copper and very high reaction temperatures. Recently, it was found that addition of relatively cheap ligands (diamines, aminoalcohols, diketones, diols) made these reactions truly catalytic, with catalyst amounts as low as 1 mol% or even lower. Since these catalysts are homogeneous, it has opened up the possibility to investigate the mechanism of these modified Ullmann reactions. Most authors agree that Cu(I) is the true catalyst even though Cu(0) and Cu(II) catalysts have also shown to be active. It should be noted however that Cu(I) is capable of reversible disproportionation into Cu(0) and Cu(II). In the first step, the nucleophile displaces the halide in the LnCu(I)X complex forming LnCu(I)ZR (Z = O, NR', S). Quite a number of mechanisms have been proposed for the actual reaction of this complex with the aryl halide: 1. Oxidative addition of ArX forming a Cu(III) intermediate followed by reductive elimination; 2. Sigma bond metathesis; in this mechanism copper remains in the Cu(II) oxidation state; 3. Single electron transfer (SET) in which a radical anion of the aryl halide is formed (Cu(I)/Cu(II)); 4. Iodine atom transfer (IAT) to give the aryl radical (Cu(I)/Cu(II)); 5. π-complexation of the aryl halide with the Cu(I) complex, which is thought to enable the nucleophilic substitution reaction. Initially, the radical type mechanisms 3 and 4 where discounted based on the fact that radical clock-type experiments with ortho-allyl aryl halides failed to give the cyclised products. However, a recent DFT study by Houk, Buchwald and co-workers shows that the modified Ullmann reaction between aryl iodide and amines or primary alcohols proceeds either via an SET or an IAT mechanism. Van Koten has shown that stalled aminations can be rejuvenated by the addition of Cu(0), which serves to reduce the formed Cu(II) to Cu(I); this also corroborates a Cu(I)/Cu(II) mechanism. Thus the use of radical clock type experiments in these metal catalysed reactions is not reliable. DFT calculations from Hartwig seem to confirm a Cu(I)/Cu(III) type mechanism for the amidation (Goldberg) reaction, although not all possible mechanisms were calculated.

Selective para-halogenation and dimerization of N,C,N'-arylruthenium(II) and -(III) 2,2':6',2''-terpyridine cations.

The N,C,N'-bonded arylruthenium 2,2':6',2''-terpyridine (tpy) complex salts [Ru(NCN)(tpy)](Cl) ([1a](Cl), NCN = 2,6-bis[(dimethylamino)methyl]phenyl) and [Ru(N--C--N)(tpy)](PF(6)), ([2a](PF(6)), N--C--N = 2,6-bis(2-pyridyl)phenyl) can be halogenated under very mild conditions by oxidation with copper(II) halogen salts. Halogenation occurs exclusively para to the site of metalation and yields the cations [Ru(4-R-NCN)(tpy)](+) (R = Cl, [1b](+) and R = Br [1c](+)) and [Ru(4-R-N--C--N)(tpy)](+) (R = Cl, [2b](+) and R = Br [2c](+)). In the presence of an excess of oxidant relative to [1a](+), the halogenation reaction follows first order kinetics in the oxidized ruthenium complex. However, by using a small excess of copper(II) compared to [1a](+), dimerization of the complex cation to [{Ru(tpy)}(2)(mu-NCN-NCN)](4+) ([3](4+)) is observed, which obeys second order kinetics. Both halogenation (C-X coupling) and dimerization (C-C coupling) are a result of the unique properties of the ruthenium(III) complexes compared to their parent ruthenium(II) species. According to the nature of the highest occupied spin orbital (HOSO) in DFT calculations the unpaired electron in [1a](2+) and [2a](2+) is partially localized on the para position. The involvement of the cyclometalated ligand in the HOSO is supported by redox data and electronic absorption spectroscopy. The ruthenium(III) species can best be considered a persistent organometallic radical.

Consequences of N,C,N'- and C,N,N'-coordination modes on electronic and photophysical properties of cyclometalated aryl ruthenium(II) complexes.

The effects of isoelectronic replacement of a neutral nitrogen donor atom by an anionic carbon atom in terpyridine ruthenium(II) complexes on the electronic and photophysical properties of the resulting N,C,N'- and C,N,N'-cyclometalated aryl ruthenium(II) complexes were investigated. To this end, a series of complexes was prepared either with ligands containing exclusively nitrogen donor atoms, that is, [Ru(R(1)-tpy)(R(2)-tpy)](2+) (R(1), R(2) = H, CO(2)Et), or bearing either one N,C,N'- or C,N,N'-cyclometalated ligand and one tpy ligand, that is, [Ru(R(1)-N(/\)C(/\)N)(R(2)-tpy)](+) and [Ru(R(1)-C(/\)N(/\)N)(R(2)-tpy)](+), respectively. Single-crystal X-ray structure determinations showed that cyclometalation does not significantly alter the overall geometry of the complexes but does change the bond lengths around the ruthenium(II) center, especially the nitrogen-to-ruthenium bond length trans to the carbanion. Substitution of either of the ligands with electron-withdrawing ester functionalities fine-tuned the electronic properties and resulted in the presence of an IR probe. Using trends obtained from redox potentials, emission energies, IR spectroelectrochemical responses, and the character of the lowest unoccupied molecular orbitals from DFT studies, it is shown that the first reduction process and luminescence are associated with the ester-substituted C,N,N'-cyclometalated ligand in [Ru(EtO(2)C-C(/\)N(/\)N)(tpy)](+). Cyclometalation in an N,C,N'-bonding motif changed the energetic order of the ruthenium d(zx), d(yz), and d(xy) orbitals. The red-shifted absorption in the N,C,N'-cyclometalated complexes is assigned to MLCT transitions to the tpy ligand. The red shift observed upon introduction of the ester moiety is associated with an increase in intensity of low-energy transitions, rather than a red shift of the main transition. Cyclometalation in the C,N,N'-binding motif also red-shifts the absorption, but the corresponding transition is associated with both ligand types. Luminescence of the cyclometalated complexes is relatively independent of the mode of cyclometalation, obeying the energy gap law within each individual series.

Redox chemistry and electronic properties of 2,3,5,6-tetrakis(2-pyridyl)pyrazine-bridged diruthenium complexes controlled by N,C,N'-biscyclometalated ligands.

To investigate the consequences of cyclometalation for electronic communication in dinuclear ruthenium complexes, a series of 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz) bridged diruthenium complexes was prepared and studied. These complexes have a central tppz ligand bridging via nitrogen-to-ruthenium coordination bonds, while each ruthenium atom also binds either a monoanionic, N,C,N'-terdentate 2,6-bis(2'-pyridyl)phenyl (R-N(wedge)C(wedge)N) ligand or a 2,2':6',2''-terpyridine (tpy) ligand. The N,C,N'-, that is, biscyclometalation, instead of the latter N,N',N''-bonding motif significantly changes the electronic properties of the resulting complexes. Starting from well-known [{Ru(tpy)}(2)(mu-tppz)](4+) (tpy = 2,2':2'',6-terpyridine) ([3](4+)) as a model compound, the complexes [{Ru(R-N(wedge)C(wedge)N)}(mu-tppz){Ru(tpy)}](3+) (R-N(wedge)C(H)(wedge)N = 4-R-1,3-dipyridylbenzene, R = H ([4a](3+)), CO(2)Me ([4b](3+))), and [{Ru(R-N(wedge)C(wedge)N)}(2)(mu-tppz)](2+), (R = H ([5a](2+)), CO(2)Me ([5b](2+))) were prepared with one or two N,C,N'-cyclometalated terminal ligands. The oxidation and reduction potentials of cyclometalated [4](3+) and [5](2+) are shifted negatively compared to non-cyclometalated [3](4+), the oxidation processes being affected more significantly. Compared to [3](4+), the electronic spectra of [5](2+) display large bathochromic shifts of the main MLCT transitions in the visible spectral region with low-energy absorptions tailing down to the NIR region. One-electron oxidation of [3](4+) and [5](2+) gives rise to low-energy absorption bands. The comproportionation constants and NIR band shape correspond to delocalized Robin-Day class III compounds. Complexes [4a](3+) (R = H) and [4b](3+) (R = CO(2)Me) also exhibit strong electronic communication, and notwithstanding the large redox-asymmetry the visible metal-to-ligand charge-transfer absorption is assigned to originate from both metal centers. The potential of the first, ruthenium-based, reversible oxidation process is strongly negatively shifted. On the contrary, the second oxidation is irreversible and cyclometalated ligand-based. Upon one-electron oxidation, a weak and low-energy absorption arises.

Probing the mer- to fac-isomerization of tris-cyclometallated homo- and heteroleptic (C,N)3 iridium(III) complexes.

We have developed techniques which allow for covalent tethering, via a "hetero" cyclometallating ligand, of heteroleptic tris-cyclometallated iridium(III) complexes to polymeric supports (for application in light-emitting diode technologies). This involved the selective synthesis and thorough characterization of heteroleptic [Ir(C,N) 2(C',N')] tris-cyclometallated iridium(III) complexes. Furthermore, the synthesis and characterization of heteroleptic [Ir(C,N) 2OR] complexes is presented. Under standard thermal conditions for the synthesis of the facial ( fac) isomer of tris-cyclometallated complexes, it was not possible to synthesize pure heteroleptic complexes of the form [Ir(C,N) 2(C',N')]. Instead, a mixture of homo- and heteroleptic complexes was acquired. It was found that a stepwise procedure involving the synthesis of a pure meridonial ( mer) isomer followed by photochemical isomerization of this mer to the fac isomer was necessary to synthesize pure fac-[Ir(C,N) 2(C',N')] complexes. Under thermal isomerization conditions, the conversion of mer-[Ir(C,N) 2(C',N')] to fac-[Ir(C,N) 2(C',N')] was also not a clean reaction, with again a mixture of homo- and heteroleptic complexes acquired. An investigation into the thermal mer to fac isomerization of both homo- and heteroleptic tris-cyclometallated complexes is presented. It was found that the process is an alcohol-catalyzed reaction with the formation of an iridium alkoxide [Ir(C,N) 2OR] intermediate in the isomerization process. This catalyzed reaction can be carried out between 50 and 100 degrees C, the first such example of low-temperature mer-fac thermal isomerization. We have synthesized analogous complexes and have shown that they do indeed react so as to give fac-tris-cyclometallated products. A detailed explanation of the intermediates (and all of their stereoisomers, in particular when systems of the generic formula [M(a,b) 2(a',b')] are synthesized) formed in the mer to fac isomerization process is presented, including how the formed intermediates react further, and the stereoisomeric products they yield.

Ligand-free copper-catalyzed C-S coupling of aryl iodides and thiols.

A protocol for the copper-catalyzed aryl-sulfur bond formation between aryl iodides and thiophenols is reported. The reaction is catalyzed by a low amount (1-2.5 mol %) of readily available and ligand-free copper iodide salt. A variety of diaryl thioethers are synthesized under relatively mild reaction conditions with good chemoselectivity and functional group tolerance.

Diorganoruthenium complexes incorporating noninnocent [C(6)H(2)(CH(2)ER(2))(2)-3,5](2)(2-) (E = N, P) bis-pincer bridging ligands: synthesis, spectroelectrochemistry, and DFT studies.

The dinuclear complex [(tpy)RuII(PCP-PCP)RuII(tpy)]Cl2 (bridging PCP-PCP = 3,3',5,5'-tetrakis(diphenylphosphinomethyl)biphenyl, [C6H2(CH2PPh2)2-3,5]22-) was prepared via a transcyclometalation reaction of the bis-pincer ligand [PC(H)P-PC(H)P] and the Ru(II) precursor [Ru(NCN)(tpy)]Cl (NCN = [C6H3(CH2NMe2)2-2,6]-) followed by a reaction with 2,2':6',2' '-terpyridine (tpy). Electrochemical and spectroscopic properties of [(tpy)RuII(PCP-PCP)RuII(tpy)]Cl2 are compared with those of the closely related [(tpy)RuII(NCN-NCN)RuII(tpy)](PF6)2 (NCN-NCN = [C6H2(CH2NMe2)2-3,5]22-) obtained by two-electron reduction of [(tpy)RuIII(NCN-NCN)RuIII(tpy)](PF6)4. The molecular structure of the latter complex has been determined by single-crystal X-ray structure determination. One-electron reduction of [(tpy)RuIII(NCN-NCN)RuIII(tpy)](PF6)4 and one-electron oxidation of [(tpy)RuII(PCP-PCP)RuII(tpy)]Cl2 yielded the mixed-valence species [(tpy)RuIII(NCN-NCN)RuII(tpy)]3+ and [(tpy)RuIII(PCP-PCP)RuII(tpy)]3+, respectively. The comproportionation equilibrium constants Kc (900 and 748 for [(tpy)RuIII(NCN-NCN)RuIII(tpy)]4+ and [(tpy)RuII(PCP-PCP)RuII(tpy)]2+, respectively) determined from cyclic voltammetric data reveal comparable stability of the [RuIII-RuII] state of both complexes. Spectroelectrochemical measurements and near-infrared (NIR) spectroscopy were employed to further characterize the different redox states with special focus on the mixed-valence species and their NIR bands. Analysis of these bands in the framework of Hush theory indicates that the mixed-valence complexes [(tpy)RuIII(PCP-PCP)RuII(tpy)]3+ and [(tpy)RuIII(NCN-NCN)RuII(tpy)]3+ belong to strongly coupled borderline Class II/Class III and intrinsically coupled Class III systems, respectively. Preliminary DFT calculations suggest that extensive delocalization of the spin density over the metal centers and the bridging ligand exists. TD-DFT calculations then suggested a substantial MLCT character of the NIR electronic transitions. The results obtained in this study point to a decreased metal-metal electronic interaction accommodated by the double-cyclometalated bis-pincer bridge when strong sigma-donor NMe2 groups are replaced by weak sigma-donor, pi-acceptor PPh2 groups.

Organic transformations on sigma-aryl organometallic complexes.

This work reviews recent developments in the field of organic transformations on sigma-aryl organometallic complexes. The general notion that M--C sigma bonds are kinetically labile, highly reactive, and incompatible with typical reaction conditions met in organic synthesis has limited the use of these synthetic strategies thus far. However, organic transformations on metal-bound sigma-aryl fragments are being used more and more by chemists in both industry and academia. In this Review, emphasis is put on the synthetic methods applied in this field up to now. The simplicity and generally good yields of these methods are very attractive for the construction of functionalized organometallic building blocks that are potentially useful as photochemical molecular devices, biosensors and -conjugates, or molecular switches. Thus, this Review has been tailored for a broader audience with the aim of encouraging the application of these strategies.

Cyclometalated ruthenium complexes for sensitizing nanocrystalline TiO2 solar cells.

Cyclometalated ruthenium complexes of [Ru(C--arrow--N) (N--N--N)] configuration are a promising new class of molecular sensitizers for dye-sensitized solar cells, as a result of their broad and red-shifted visible absorption in comparison to the analogous [Ru(N--N--N)2] type coordinative complexes.

A new, easily recyclable arylating agent based on a diphosphino-digold(I) complex.

The synthesis of two organogold(I) complexes, [(Au(NCN))2(dppbp)] (6) and [(Au(Phebox))2(dppbp)] (9), and their application in subsequent transmetalating reactions are described. A trinuclear organogold(I) complex, [(AuCl)3(tdpppb)] (4) is also reported, which exhibits a surprisingly high solubility in dichloromethane. It was found that 6 and 9 can cleanly transfer the anionic NCN-([C(6)H(3)(CH(2)NMe(2))2-2,6]-) or Phebox-([2,6-bis(oxazolinyl)phenyl]-) moiety to Ti(IV) and Pd(II) centers, respectively. The coproduct [(AuCl)2(dppbp)] (3, dppbp is [4-Ph(2)PC(6)H(4)]2 (1)) formed during this transmetalation reaction, precipitates almost quantitatively from the reaction mixture (toluene) and can thus be separated by simple filtration. In comparison, [AuCl(PPh3)], formed as the coproduct in the transmetalation reaction of [Au(NCN)(PPh3)] with metal salts, has a higher solubility in apolar solvents and thus is more difficult to separate from the resultant organometallic complex. Digold complex 6 has been characterized by NMR spectroscopy and crystallographic analyses. These analyses show that the two gold units are essentially independent. The formation of a dimetallic transmetalating agent based on gold(I) had no effect on its transmetalating properties.

Hydroxy- and mercaptopyridine pincer platinum and palladium complexes generated by silver-free halide abstraction.

A silver-free route has been employed for the synthesis of a number of Pd and Pt complexes supported by an NCN "pincer" ligand (NCN = [2,6-(Me2NCH2)2C6H3]-) via halide abstraction. This was achieved by the use of o-, m-, and p-hydroxypyridines or o- and p-mercaptopyridines in basic ethanol solutions. The acidic OH or SH protons are removed to generate the formally anionic ligands. X-ray crystal structure determination of these complexes shows that the bonding of the substituted pyridine ligands occurs exclusively through the pyridine N for hydroxypyridines and exclusively through the thiol S in mercaptopyridines. In the hydroxypyridine case, the ortho and para isomers tautomerize to generate pyridone structures with a covalent M-N bond, whereas the m-hydroxypyridine complex, which is unable to tautomerize, is found to still be bound through the pyridine N but in a zwitterionic structure. The mercaptopyridine complexes are the first reported examples of pincer-ligated Pd and Pt thiolate species. The pyridine ligands can be quantitatively exchanged for chloride by reaction with excess NH4Cl, a potentially useful chemical switch for ligation/decomplexation of this ligand type.

A novel heteroditopic terpyridine-pincer ligand as building block for mono- and heterometallic Pd(II) and Ru(II) complexes.

A palladium-catalyzed Stille coupling reaction was employed as a versatile method for the synthesis of a novel terpyridine-pincer (3, TPBr) bridging ligand, 4'-{4-BrC6H2(CH2NMe2)2-3,5}-2,2':6',2' '-terpyridine. Mononuclear species [PdX(TP)] (X = Br, Cl), [Ru(TPBr)(tpy)](PF6)2, and [Ru(TPBr)2](PF6)2, synthesized by selective metalation of the NCNBr-pincer moiety or complexation of the terpyridine of the bifunctional ligand TPBr, were used as building blocks for the preparation of heterodi- and trimetallic complexes [Ru(TPPdCl)(tpy)](PF6)2 (7) and [Ru(TPPdCl)2](PF6)2 (8). The molecular structures in the solid state of [PdBr(TP)] (4a) and [Ru(TPBr)2](PF6)2 (6) have been determined by single-crystal X-ray analysis. Electrochemical behavior and photophysical properties of the mono- and heterometallic complexes are described. All the above di- and trimetallic Ru complexes exhibit absorption bands attributable to (1)MLCT (Ru --> tpy) transitions. For the heteroleptic complexes, the transitions involving the unsubstituted tpy ligand are at a lower energy than the tpy moiety of the TPBr ligand. The absorption bands observed in the electronic spectra for TPBr and [PdCl(TP)] have been assigned with the aid of TD-DFT calculations. All complexes display weak emission both at room temperature and in a butyronitrile glass at 77 K. The considerable red shift of the emission maxima relative to the signal of the reference compound [Ru(tpy)2]2+ indicates stabilization of the luminescent 3MLCT state. For the mono- and heterometallic complexes, electrochemical and spectroscopic studies (electronic absorption and emission spectra and luminescence lifetimes recorded at room temperature and 77 K in nitrile solvents), together with the information gained from IR spectroelectrochemical studies of the dimetallic complex [Ru(TPPdSCN)(tpy)](PF6)2, are indicative of charge redistribution through the bridging ligand TPBr. The results are in line with a weak coupling between the {Ru(tpy)2} chromophoric unit and the (non)metalated NCN-pincer moiety.

Metallasupramolecular architectures, an overview of functional properties and applications.

The synthesis of metallasupramolecular architectures, such as two-dimensional squares, triangles and polygons, and three-dimensional cages and polyhedra, has attracted much interest in the past decade. These structures are designed to have novel specific shapes and dimensions with interesting functional properties. In this overview the functional properties of metallasupramolecular architectures are highlighted with emphasis on potential applications such as catalysis, cavity-directed synthesis and sensing, that can be performed with these materials.

Aminoarenethiolate-copper(I)-catalyzed amination of aryl bromides.

[reaction, structure: see text] Aminoarenethiolate-copper(I) complexes are known to be efficient catalysts for carbon-carbon bond formation. Here, we show the first examples that these thiolate-copper(I) complexes are efficient for carbon-nitrogen bond formation reactions as well. N-Arylation of benzylamine and imidazole with bromobenzene was achieved either in NMP as solvent or under solvent-free conditions in the presence of 2.5 mol % of aminoarenethiolate-copper(I) complex only.

Neutral pyridyl-functionalized C,N-ortho-chelated aminoaryl platinum(II) corner building blocks for application in coordination reactions.

Two homoleptic pyridyl-functionalized C,N-ortho-chelating aminoaryl platinum(II) complexes, cis-[Pt(eta(2)-C,N)] (3a,b), were prepared via an unconventional method involving the initial synthesis of a bromide-functionalized C,N-chelating aminoaryl platinum(II) precursor complex 8, to which subsequently pyridyl groups were attached via a Suzuki-Miyaura C-C coupling reaction. The electron-donating properties of the pyridyl nitrogen atoms of the resulting complexes (3a,b) were used in complexation reactions with monocationic NCN-pincer (NCN = [C6H3(CH2NMe2)(2-)2,6]-) platinum(II) (11a) and palladium(II) (12a) nitrate complexes [M(NCN)(NO3)], thereby obtaining four trimetallic coordination complexes 16-19. The difference in the pyridine-metal coordination behavior between platinum and palladium was studied by varying the ratios of the reagents and by variable-temperature NMR experiments. IR and Raman analyses of 11a and 12a were performed to determine the coordination behavior of the nitrate counteranion, and it was found that both NO3- and H2O coordinate to the metal centers. The crystal structure determinations of free pyridyl complex 3a, [Pt(NCN)(NO3)] (11a), and [Pt(NCN)(NO3)].(H2O) (11b), as well as the crystal structure of trisplatinum coordination complex 16, are reported.