Wave Turbulence on the Surface of a Fluid in a High-Gravity Environment.

We report on the observation of gravity-capillary wave turbulence on the surface of a fluid in a high-gravity environment. By using a large-diameter centrifuge, the effective gravity acceleration is tuned up to 20 times Earth's gravity. The transition frequency between the gravity and capillary regimes is thus increased up to one decade as predicted theoretically. A frequency power-law wave spectrum is observed in each regime and is found to be independent of the gravity level and of the wave steepness. While the timescale separation required by weak turbulence is well verified experimentally regardless of the gravity level, the nonlinear and dissipation timescales are found to be independent of the scale, as a result of the finite size effects of the system (large-scale container modes) that are not taken currently into account theoretically.

Influence of nanostructural environment and fluid flow on osteoblast-like cell behavior: a model for cell-mechanics studies.

Introducing nanoroughness on various biomaterials has been shown to profoundly effect cell-material interactions. Similarly, physical forces act on a diverse array of cells and tissues. Particularly in bone, the tissue experiences compressive or tensile forces resulting in fluid shear stress. The current study aimed to develop an experimental setup for bone cell behavior, combining a nanometrically grooved substrate (200 nm wide, 50 nm deep) mimicking the collagen fibrils of the extracellular matrix, with mechanical stimulation by pulsatile fluid flow (PFF). MC3T3-E1 osteoblast-like cells were assessed for morphology, expression of genes involved in cell attachment and osteoblastogenesis and nitric oxide (NO) release. The results showed that both nanotexture and PFF did affect cellular morphology. Cells aligned on nanotexture substrate in a direction parallel to the groove orientation. PFF at a magnitude of 0.7 Pa was sufficient to induce alignment of cells on a smooth surface in a direction perpendicular to the applied flow. When environmental cues texture and flow were interacting, PFF of 1.4 Pa applied parallel to the nanogrooves initiated significant cellular realignment. PFF increased NO synthesis 15-fold in cells attached to both smooth and nanotextured substrates. Increased collagen and alkaline phosphatase mRNA expression was observed on the nanotextured substrate, but not on the smooth substrate. Furthermore, vinculin and bone sialoprotein were up-regulated after 1 h of PFF stimulation. In conclusion, the data show that interstitial fluid forces and structural cues mimicking extracellular matrix contribute to the final bone cell morphology and behavior, which might have potential application in tissue engineering.

An atomic force microscope operating at hypergravity for in situ measurement of cellular mechano-response.

We present a novel atomic force microscope (AFM) system, operational in liquid at variable gravity, dedicated to image cell shape changes of cells in vitro under hypergravity conditions. The hypergravity AFM is realized by mounting a stand-alone AFM into a large-diameter centrifuge. The balance between mechanical forces, both intra- and extracellular, determines both cell shape and integrity. Gravity seems to be an insignificant force at the level of a single cell, in contrast to the effect of gravity on a complete (multicellular) organism, where for instance bones and muscles are highly unloaded under near weightless (microgravity) conditions. However, past space flights and ground based cell biological studies, under both hypogravity and hypergravity conditions have shown changes in cell behaviour (signal transduction), cell architecture (cytoskeleton) and proliferation. Thus the role of direct or indirect gravity effects at the level of cells has remained unclear. Here we aim to address the role of gravity on cell shape. We concentrate on the validation of the novel AFM for use under hypergravity conditions. We find indications that a single cell exposed to 2 to 3 x g reduces some 30-50% in average height, as monitored with AFM. Indeed, in situ measurements of the effects of changing gravitational load on cell shape are well feasible by means of AFM in liquid. The combination provides a promising technique to measure, online, the temporal characteristics of the cellular mechano-response during exposure to inertial forces.

Simulated microgravity activates MAPK pathways in fibroblasts cultured on microgrooved surface topography.

This study evaluated in vitro the differences in morphological behaviour between fibroblast cultured on smooth and microgrooved substrata (groove depth: 0.5 mum, width: 1 mum), which were subjected to simulated microgravity. The aim of the study was to clarify which of these parameters was more dominant to determine cell behaviour. Morphological characteristics were investigated using scanning electron microscopy and fluorescence microscopy in order to obtain qualitative information on cell alignment. Expression of collagen type I, and alpha1-, beta1-, beta3-integrin were investigated by QPCR. Finally, immunoblotting was applied to visualise MAPK signalling pathways. Microscopy and image analysis showed that the fibroblasts aligned along the groove direction on all textured surfaces. On the smooth substrata, cells had spread out in a random fashion. The alignment of cells cultured on grooved surfaces under simulated microgravity, after 48 h of culturing appeared similar to those cultured at 1g, although cell shape was different. Analysis of variance proved that all main parameters: topography, gravity force, and time were significant. In addition, gene levels were reduced by simulated microgravity particularly those of beta3-integrin and collagen, however alpha-1 and beta-1 integrin levels were up-regulated. ERK1/2 was reduced in RPM, however, JNK/SAPK and p38 remained active. The members of the small GTPases family were stimulated under microgravity, particularly RhoA and Cdc42. The results are in agreement that application of microgravity to fibroblasts promotes a change in their morphological appearance and their expression of cell-substratum proteins through the MAPK intracellular signalling pathways.

The threshold at which substrate nanogroove dimensions may influence fibroblast alignment and adhesion.

The differences in morphological behaviour between fibroblasts cultured on smooth and nanogrooved substrata (groove depth: 5-350 nm, width: 20-1000 nm) have been evaluated in vitro. The aim of the study was to clarify to what extent cell guidance occurs on increasingly smaller topographies. Pattern templates were made using electron beam lithography, and were subsequently replicated in polystyrene cell culture material using solvent casting. The replicates were investigated with atomic force microscopy (AFM). After seeding with fibroblasts, morphological characteristics were investigated using scanning electron microscopy (SEM) and light microscopy, in order to obtain qualitative and quantitative information on cell alignment. AFM revealed that the nanogroove/ridge widths were replicated perfectly, although at deeper levels the grooves became more concave. The smooth substrata had no distinguishable pattern other than a roughness amplitude of 1 nm. Interestingly, microscopy and image analysis showed that fibroblast after 4 h had adjusted their shape according to nanotopographical features down to cut-off values of 100 nm width and 75 nm depth. After 24 h culturing time, fibroblasts would even align themselves on groove depths as shallow as 35 nm. It appears depth is the most essential parameter in cellular alignment on groove patterns with a pitch ratio of 1:1. On the smooth substrata, cells always spread out in a random fashion. Analysis of variance (ANOVA) demonstrated that both main parameters, topography and culturing time, were significant. We conclude that fibroblast cells cultured on nanotopography experience a threshold feature size of 35 nm, below this value contact guidance does no longer exist.

The effect of combined simulated microgravity and microgrooved surface topography on fibroblasts.

This study evaluated in vitro the differences in morphological behaviour between fibroblast cultured on smooth and microgrooved substrata (groove depth: 0.5 microm, width: 1, 2, 5, and 10 microm), which were subjected to simulated microgravity. The aim of the study was to clarify which of these parameters was more dominant to determine cell behaviour. Morphological characteristics were investigated using scanning electron microscopy and fluorescence microscopy in order to obtain qualitative information on cell alignment and area. Confocal laser scanning microscopy visualised distribution of actin filaments and focal adhesion points. Finally, expression of collagen type I, fibronectin, and alpha1- and beta1-integrin were investigated by PCR. Microscopy and image analysis showed that the fibroblasts aligned along the groove direction on all textured surfaces. On the smooth substrata, cells had spread out in a random fashion. The alignment of cells cultured on grooved surfaces decreased under simulated microgravity, especially after 24 h of culturing. Cell surface area on grooved substrata were significantly smaller than on smooth substrata, but simulated microgravity on the grooved groups resulted in an enlargement of cell area. ANOVA was performed on all main parameters: topography, gravity force, and time. In this analysis, all parameters proved significant. In addition, gene levels were reduced by microgravity particularly those of beta1-integrin and fibronectin. From our data it is concluded that the fibroblasts primarily adjust their shape according to morphological environmental cues like substratum surface whilst a secondary, but significant, role is played by microgravity conditions.

Drosophila melanogaster, a model system for comparative studies on the responses to real and simulated microgravity.

A key requirement to enhance our understanding of the response of biological organisms to different levels of gravity is the availability of experimental systems that can simulate microgravity and hypergravity in ground-based laboratories. This paper compares the results obtained from analysing gene expression profiles of Drosophila in space versus those obtained in a random position machine (RPM) and by centrifugation. The correlation found validates the use of the RPM simulation technique to establish the effects of real microgravity on biological systems. This work is being extended to investigate Drosophila development in another gravity modifying instrument, the levitation magnet.

The effect of combined hypergravity and micro-grooved surface topography on the behaviour of fibroblasts.

This study evaluated in vitro the differences in morphological behaviour between fibroblast cultured on smooth and micro-grooved substrata (groove depth: 1 mum, width: 1, 2, 5, 10 microm), which undergo artificial hypergravity by centrifugation (10, 24 and 50 g; or 1 g control). The aim of the study was to clarify which of these parameters was more important to determine cell behaviour. Morphological characteristics were investigated using scanning electron microscopy and fluorescence microscopy in order to obtain qualitative information on cell spreading and alignment. Confocal laser scanning microscopy visualised distribution of actin filaments and vinculin anchoring points through immunostaining. Finally, expression of collagen type I, fibronectin, and alpha(1)- and beta(1)-integrin were investigated by PCR. Microscopy and image analysis showed that the fibroblasts aligned along the groove direction on all textured surfaces. On the smooth substrata (control), cells spread out in a random fashion. The alignment of cells cultured on grooved surfaces increased with higher g-forces until a peak value at 25 g. An ANOVA was performed on the data, for all main parameters: topography, gravity force, and time. In this analysis, all parameters proved significant. In addition, most gene levels were reduced by hypergravity. Still, collagen type 1 and fibronectin are seemingly unaffected by time or force. From our data it is concluded that the fibroblasts primarily adjust their shape according to morphological environmental cues like substratum surface whilst a secondary, but significant, role is played by hypergravity forces.

The effect of combined cyclic mechanical stretching and microgrooved surface topography on the behavior of fibroblasts.

Under the influence of mechanical stress, cultured fibroblasts have a tendency to orient themselves perpendicular to the stress direction. Similar cell alignment can be induced by guiding cells along topographical clues, like microgrooves. The aim of this study was to evaluate cell behavior on microgrooved substrates, exposed to cyclic stretching. We hypothesized that cellular shape is mainly determined by topographical clues. On basis of earlier studies, a 10-microm wide square groove, and a 40-microm wide V-shaped groove pattern were used. Smooth substrates served as controls. Onto all substrates fibroblasts were cultured and 1-Hz cyclic stretching was applied (0, 4, or 8%) for 3-24 h. Cells were prepared for scanning electron microscopy, immunostaining of filamentous actin, alignment measurements, and PCR (collagen-I, fibronectin, alpha1- and beta1-integrins). Results showed that cells aligned on all grooved surfaces, and fluorescence microscopy showed similar orientation of intracellular actin filaments. After 3 h of stretch, cellular orientation started to commence, and after 24 h the cells had aligned themselves almost entirely. Image analysis showed better orientation with increasing groove depth. Statistical testing proved that the parameters groove type, groove orientation, and time all were significant, but the variation of stretch force was not. Substrates with microgrooves perpendicular to the stretch direction elicit a better cell alignment. The expression of beta1-integrin and collagen-I was higher in the stretched samples. In conclusion, we can maintain our hypothesis, as microgrooved topography was most effective in applying strains relative to the long axis of the cell, and only secondary effects of stretch force were present.

Ground based studies of gene expression in Arabidopsis exposed to gravity stresses.

As a link in the preparation of the MULTIGEN experiment, which will take place on the International Space Station, ground based studies of the gene expression in Arabidopsis thaliana were performed. Microarray technology was used to screen Arabidopsis seedlings exposed to simulated hypogravity on a Random Positioning Machine and a 1 x g control sample. This screening showed differential expression in 177 out of approximately 8000 genes. Some of these genes can be grouped into functional categories, e.g. general metabolism, biogenesis of cellular components, cellular transport and transport facilitation, and cell rescue and defense response. However, about 50% of the genes encode proteins with unknown function. Based on the above results a new "in-house" cDNA microarray was constructed. Some of the selected genes on this microarray (e.g. Xyloglucan endotransglycosylase, At2g18800) showed differential expression both in Arabidopsis exposed to hypergravity and simulated hypogravity by use of a centrifuge and a Random Positioning Machine.

Microgravity and bone cell mechanosensitivity.

The capacity of bone tissue to alter its mass and structure in response to mechanical demands has long been recognized but the cellular mechanisms involved remained poorly understood. Bone not only develops as a structure designed specifically for mechanical tasks, but it can adapt during life toward more efficient mechanical performance. Mechanical adaptation of bone is a cellular process and needs a biological system that senses the mechanical loading. The loading information must then be communicated to the effector cells that form new bone or destroy old bone. The in vivo operating cell stress derived from bone loading is likely the flow of interstitial fluid along the surface of osteocytes and lining cells. The response of bone cells in culture to fluid flow includes prostaglandin (PG) synthesis and expression of prostaglandin G/H synthase inducible cyclooxygenase (COX-2). Cultured bone cells also rapidly produce nitric oxide (NO) in response to fluid flow as a result of activation of endothelial nitric oxide synthase (ecNOS), which enzyme also mediates the adaptive response of bone tissue to mechanical loading. Earlier studies have shown that the disruption of the actin-cytoskeleton abolishes the response to stress, suggesting that the cytoskeleton is involved in cellular mechanotransduction. Microgravity, or better near weightlessness, is associated with the loss of bone in astronauts, and has catabolic effects on mineral metabolism in bone organ cultures. This might be explained as resulting from an exceptional form of disuse under near weightlessness conditions. However, under near weightlessness conditions the assembly of cytoskeletal elements may be altered since it has been shown that the direction of the gravity vector determines microtubular pattern formation in vivo. We found earlier that the transduction of mechanical signals in bone cells also involves the cytoskeleton and is related to PGE2 production. Therefore it is possible that the mechanosensitivity of bone cells is altered under near weightlessness conditions, and that this abnormal mechanosensation contributes to disturbed bone metabolism observed in astronauts. In our current project for the International Space Station, we wish to test this hypothesis experimentally using an in vitro model. The specific aim of our research project is to test whether near weightlessness decreases the sensitivity of bone cells for mechanical stress through a decrease in early signaling molecules (NO, PGs) that are involved in the mechanical loading-induced osteogenic response. Bone cells are cultured with or without gravity prior to and during mechanical loading, using our modified in vitro oscillating fluid flow apparatus. In this "FlowSpace" project we are developing a cell culture module that is used to provide further insight in the mechanism of mechanotransduction in bone.

Characteristics of the parallel-plate flow chamber for mechanical stimulation of bone cells under microgravity.

We show the use of a dimensionless parameter alpha h, in properly downscaling a parallel-plate flow chamber system for flow stimulation of bone cells under microgravity. The proper experimental regime for exposing cells to predictable levels of dynamic fluid shear stress requires: 1) alpha h < 2, based on the consequent quasi-parabolic form of the velocity profile in this regime, and 2) fo m

Calcium/calmodulin-mediated gravitropic response in plants.

Calcium and calmodulin (CaM) play an important role in gravity signal transduction. However, the molecular and biochemical mechanisms involved in gravity signal transduction are not clearly understood. It is becoming evident that hydrogen peroxide is involved in gravity-induced response. Recent results indicate that Ca 2+/CaM is involved in hydrogen peroxide homeostasis by regulating catalase activity in plants (Yang and Poovaiah, 2002). It is well established that auxin controls differential growth during gravitropic bending. Results indicated that an auxin-responsive gene family (SAURs) encodes for Ca 2+ /CaM-binding proteins (Yang and Poovaiah, 2000a). To investigate the effects of gravity on the expression of genes involved in Ca 2+/CaM-mediated signaling, Arabidopsis and corn seedlings were subjected to simulated microgravity using the Random Positioning Machine (RPM), and hypergravity using the MidiCAR centrifuge. The changes in mRNA levels were studied. Selective and significant differences in gene expression were observed in simulated microgravity- and hypergravity- treated plants. The relevance of these genes in gravity signal perception and transduction is discussed.