Accuracy of patient-specific I-131 dosimetry using hybrid whole-body planar-SPECT/CT I-123 and I-131 imaging.

PURPOSE: This study aimed to assess the accuracy of patient-specific absorbed dose calculations for tumours and organs at risk in radiopharmaceutical therapy planning, utilizing hybrid planar-SPECT/CT imaging. METHODS: Three Monte Carlo (MC) simulated digital patient phantoms were created, with time-activity data for mIBG labelled to I-123 (LEHR and ME collimators) and I-131 (HE collimator). The study assessed the accuracy of the mean absorbed doses for I-131-mIBG therapy treatment planning. Multiple planar whole-body (WB) images were simulated (between 1 to 72 h post-injection (p.i)). The geometric-mean image of the anterior and posterior WB images was calculated, with scatter and attenuation corrections applied. Time-activity curves were created for regions of interest over the liver and two tumours (diameters: 3.0 cm and 5.0 cm) in the WB images. A corresponding SPECT study was simulated at 24 h p.i and reconstructed using the OS-EM algorithm, incorporating scatter, attenuation, collimator-detector response, septal scatter and penetration corrections. MC voxel-based absorbed dose rate calculations used two image sets, (i) the activity distribution represented by the SPECT images and (ii) the activity distribution from the SPECT images distributed uniformly within the volume of interest. Mean absorbed doses were calculated considering photon and charged particle emissions, and beta emissions only. True absorbed doses were calculated by MC voxel-based dosimetry of the known activity distributions for reference. RESULTS: Considering photon and charged particle emissions, mean absorbed dose accuracies across all three radionuclide-collimator combinations of 3.8 ± 5.5% and 0.1 ± 0.9% (liver), 5.2 ± 10.0% and 4.3 ± 1.7% (3.0 cm tumour) and 15.0 ± 5.8% and 2.6 ± 0.6% (5.0 cm tumour) were obtained for image set (i) and (ii) respectively. Considering charged particle emissions, accuracies of 2.7 ± 4.1% and 5.7 ± 0.7% (liver), 3.2 ± 10.2% and 9.1 ± 1.7% (3.0 cm tumour) and 13.6 ± 5.7% and 7.0 ± 0.6% (5.0 cm tumour) were obtained for image set (i) and (ii) respectively. CONCLUSION: The hybrid WB planar-SPECT/CT method proved accurate for I-131-mIBG dosimetry, suggesting its potential for personalized treatment planning.

Characterization of Gafchromic™ film response against radionuclide activity.

PURPOSE: In this study, we used Gafchromic™ film XR-QA2 and RT-QA2 to characterize the film energy response against various radionuclides. We introduce a neutron depletion theoretical model that can describe film response as a function of cumulated activity. The film response was investigated with respect to different backscatter media such as polystyrene, perspex, lead and corrugated fibreboard carton (CFC). The sensitivity of the two types of film to different energies was also studied. Lastly, a film stack method was tested to allow the user to obtain sequential, cumulative doses at different time points. METHODS: Pieces of Gafchromic™ film XR-QA2 and RT-QA2 were exposed to Am-241, Cs-137, Tc-99m, and I-131 to obtain various cumulative activities. After 24 h, each film piece was digitized by scanning it with an Epson Perfection V330 flatbed scanner to obtain 48-bit RGB TIFF images. Afterwards, each image was processed with the Image J software package. The film response was fitted to a theoretically derived function based on the neutron depletion model and the Beer-Lambert Law and compared with an existing fitting function. Layers of the film were also placed together and irradiated with the above-mentioned radionuclides to investigate the possibility of increasing the sensitivity of the film as a dosimeter. The energy response of the two types of film was investigated by irradiating pieces of film with different photon energies. RESULTS: The theoretical response model fits OD vs cumulative activity accurately. XR-QA2 film shows good energy film response by using CFC as a backscatter material when using radionuclides. From the results, it is also evident that XR-QA2 is more sensitive to low energy gamma rays than RT-QA2. Its OD sensitivity can be increased by 2 ± 0.2 when using a double layer film and by 2.8 ± 0.3 when using a triple-layer film. By using a film stack, the experimental time can be decreased by using the second-order polynomial relationship obtained to relate the stacked film data to the single film data. CONCLUSIONS: The neutron depletion theoretical model is accurate and contains less free parameters than higher-order polynomial fits. The Gafchromic™ XR-QA2 film is also better to use in nuclear medicine because of its higher sensitivity. The sensitivity of the film as a dosimeter can also be increased by using multiple layers of film. Experiment times can also be decreased by using the film stack method.

Evaluation of Iodine-123 and Iodine-131 SPECT activity quantification: a Monte Carlo study.

PURPOSE: The quantitative accuracy of Nuclear Medicine images, acquired for both planar and SPECT studies, is influenced by the isotope-collimator combination as well as image corrections incorporated in the iterative reconstruction process. These factors can be investigated and optimised using Monte Carlo simulations. This study aimed to evaluate SPECT quantification accuracy for 123I with both the low-energy high resolution (LEHR) and medium-energy (ME) collimators and 131I with the high-energy (HE) collimator. METHODS: Simulated SPECT projection images were reconstructed using the OS-EM iterative algorithm, which was optimised for the number of updates, with appropriate corrections for scatter, attenuation and collimator detector response (CDR), including septal scatter and penetration compensation. An appropriate calibration factor (CF) was determined from four different source geometries (activity-filled: water-filled cylindrical phantom, sphere in water-filled (cold) cylindrical phantom, sphere in air and point-like source), investigated with different volume of interest (VOI) diameters. Recovery curves were constructed from recovery coefficients to correct for partial volume effects (PVEs). The quantitative method was evaluated for spheres in voxel-based digital cylindrical and patient phantoms. RESULTS: The optimal number of OS-EM updates was 60 for all isotope-collimator combinations. The CFpoint with a VOI diameter equal to the physical size plus a 3.0-cm margin was selected, for all isotope-collimator geometries. The spheres' quantification errors in the voxel-based digital cylindrical and patient phantoms were less than 3.2% and 5.4%, respectively, for all isotope-collimator combinations. CONCLUSION: The study showed that quantification errors of less than 6.0% could be attained, for all isotope-collimator combinations, if corrections for; scatter, attenuation, CDR (including septal scatter and penetration) and PVEs are performed. 123I LEHR and 123I ME quantification accuracies compared well when appropriate corrections for septal scatter and penetration were applied. This can be useful in departments that perform 123I studies and may not have access to ME collimators.

Validation of a SIMIND Monte Carlo modelled gamma camera for Iodine-123 and Iodine-131 imaging.

PURPOSE: Monte Carlo (MC) modelling techniques can assess the quantitative accuracy of both planar and SPECT Nuclear Medicine images. It is essential to validate the MC code's capabilities in modelling a specific clinical gamma camera, for radionuclides of interest, before its use as a clinical image simulator. This study aimed to determine if the SIMIND MC code accurately simulates emission images measured with a Siemens Symbia™ T16 SPECT/CT system for I-123 with a LEHR and a ME collimator and for I-131 with a HE collimator. METHODS: The static and WB planar validation tests included extrinsic system energy pulse-height distributions (EPHDs), system sensitivity and system spatial resolution in air as well as a scatter medium. The SPECT validation test comprised the sensitivity from a simple geometry of a sphere in a cylindrical water-filled phantom. RESULTS: The system EPHDs compared well, with differences between measured and simulated primary photopeak FWHM values not exceeding 4.6 keV. Measured and simulated planar system sensitivity values displayed percentage differences less than 6.9% and 6.3% for static and WB planar images, respectively. Measured and simulated planar system spatial resolution values in air showed percentage differences not exceeding 6.4% (FWHM) and 10.0% (FWTM), and 5.1% (FWHM) and 5.4% (FWTM) for static and WB planar images, respectively. For static planar system spatial resolution measured and simulated in a scatter medium, percentage differences of FWHM and FWTM values were less than 5.8% and 12.6%, respectively. The maximum percentage difference between the measured and simulated SPECT validation results was 3.6%. CONCLUSION: The measured and simulated validation results compared well for all isotope-collimator combinations and showed that the SIMIND MC code could be used to accurately simulate static and WB planar and SPECT projection images of the Siemens Symbia™ T16 SPECT/CT for both I-123 and I-131 with their respective collimators.

Modelling of energy-dependent spectral resolution for SPECT Monte Carlo simulations using SIMIND.

PURPOSE: Monte Carlo (MC) modelling techniques have been used extensively in Nuclear Medicine (NM). The theoretical energy resolution relationship ( ∝ 1 / E ), does not accurately predict the gamma camera detector response across all energies. This study aimed to validate the accuracy of an energy resolution model for the SIMIND MC simulation code emulating the Siemens Symbia T16 dual-head gamma camera. METHODS: Measured intrinsic energy resolution data (full width half maximum (FWHM) values), for Ba-133, Lu-177, Am-241, Ga-67, Tc-99m, I-123, I-131 and F-18 sources in air, were used to create a fitted model of the energy response of the gamma camera. Both the fitted and theoretical models were used to simulate intrinsic and extrinsic energy spectra using three different scenarios (source in air; source in simple scatter phantom and a clinical voxel-based digital patient phantom). RESULTS: The results showed the theoretical model underestimated the FWHM values at energies above 160.0 keV up to 23.5 keV. In contrast, the fitted model better predicted the measured FWHM values with differences less than 3.3 keV. The I-131 in-scatter energy spectrum simulated with the fitted model better matched the measured energy spectrum. Higher energy photopeaks, (I-123: 528.9 keV and I-131: 636.9 keV) simulated with the fitted model, more accurately resembled the measured photopeaks. The voxel-based digital patient phantom energy spectra, simulated with the fitted and theoretical models, showed the potential impact of an incorrect energy resolution model when simulating isotopes with multiple photopeaks. CONCLUSION: Modelling of energy resolution with the proposed fitted model enables the SIMIND user to accurately simulate NM images. A great improvement was seen for high-energy photon emitting isotopes (e.g. I-131), as well as isotopes with multiple photopeaks (e.g. Lu-177, I-131 and Ga-67) in comparison to the theoretical model. This will result in accurate evaluation of radioactivity quantification, which is vital for dosimetric purposes.

Biodistribution (as determined by the radiolabelled equivalent) of a gold(III) bis(pyrrolide-imine) Schiff base complex: a potential chemotherapeutic.

The biodistribution of an N2 N2 ' tetradentate gold(III) chelate, which is known to be cytotoxic towards a range of human cancer cell lines, was determined by a radiolabelled equivalent of the compound. The (198) Au-labelled gold(III) chelate of a bis(pyrrolide-imine) Schiff base ligand with a three-carbon di(azomethine) linkage was successfully synthesised with a high radiochemical yield of 73% and radiochemical purity of >95%. The high energy γ-ray emitted by the (198) Au nucleus was used to follow the biodistribution of the compound in vivo in six male Sprague Dawley rats on a gamma camera. The log Po/w value of the (nat) Au analogue, -1.92(2), showed that the compound is hydrophilic and therefore likely to largely remain in the blood pool. This was confirmed by the biodistribution study, which showed 21% of the injected dose (ID) remained in the blood pool 4.5 h after injection. This decreased to 10.8% over a 24-h period. The activity measured in the lungs, 1.48%ID/g, remained relatively constant over a 24-h period suggesting that the complex had accumulated in the lungs in the form of particulates, and could not be cleared by the test subjects. The t½ for the heart and lungs was greater than 24 h. Excretion of the test compound is seemingly via the kidneys, but is slow with approximately 30% of the ID excreted within 24 h.

Enhanced myocardial contractility associated with hypercalcaemia of hyperparathyroidism - a case study in six patients.

The possible association of increased left ventricular ejection fraction (LVEF) in patients with increased serum Ca(2+) was observed in our clinic. Six patients with confirmed primary hyperparathyroidism and hypercalcaemia were studied prospectively. Tc-99m sestamibi gated SPECT was done pre- and postoperatively. The LVEF was abnormally high in all the patients pre-operatively, i.e. above the normal reference range (47-61%) as used in our clinic. It decreased in all of them postoperatively, yet in only three patients to values within the normal range. This was associated with normalisation of the serum Ca(2+) values. The median of the pre-operative LVEF was 74% and postoperative it was 61.5%. The median difference was 9% with a 95% CI for the median difference for paired data (6; 26). This was statistically significant. Increased LVEF was not previously described as part of the clinical picture of primary hyperparathyroidism. The in vivo effect of chronic hypercalcaemia on LV pump function my need to be revisited.