Assessment of occupational exposure to radiofrequency fields and radiation.

The use of personal monitors for the assessment of exposure to radiofrequency fields and radiation in potential future epidemiological studies of occupationally exposed populations has been investigated. Data loggers have been developed for use with a commercially available personal monitor and these allowed personal exposure records consisting of time-tagged measurements of electric and magnetic field strength to be accrued over extended periods of the working day. The instrumentation was worn by workers carrying out tasks representative of some of their typical daily activities at a variety of radio sites. The results indicated significant differences in the exposures of workers in various RF environments. A number of measures of exposure have been examined with a view to assessing possible exposure metrics for epidemiological studies. There was generally a good correlation between a given measure of electric field strength and the same measure of magnetic field strength.

Longitudinal analyses of chest radiographs from the European Carbon Black Respiratory Morbidity Study.

High levels of exposure to carbon black have been linked with an increased prevalence of chest radiograph abnormalities. However, it is unclear to what extent current levels of exposure in the carbon black manufacturing industry are associated with new cases of and progression in small opacities. Longitudinal analyses were carried out on data from workers in the European carbon black manufacturing industry who provided three full-size chest radiographs sequentially between 1987-1995. All chest radiographs were independently read by three experienced readers according to the International Labour Organisation (ILO) classification. After exclusion of participants with previous lung diseases or injuries, females, unreadable chest radiographs and from factories with a low participation rate, data from 675 workers were available for the longitudinal analyses. An association was observed between cumulative carbon black exposure and new cases of chest radiograph abnormalities (ILO category > or = 1/0) and progression in small opacities. These associations were mainly related to changes in chest radiographs from workers at one factory. A large percentage of workers with chest radiograph abnormalities reversed to normal chest films; however, after adjusting for other factors, this was not associated with levels of exposure to carbon black dust. In conclusion, the results show that exposure to carbon black is associated with increased risk of chest radiographic abnormalities, which may be reversible after reduction or cessation of exposure.

Determinants of inhalable dust exposure in the European carbon black manufacturing industry.

A large study to investigate the respiratory health effects of occupational exposure to carbon black in the European carbon black manufacturing industry commenced in 1987. During the study, a large amount of personal occupational exposure data was collected. This article describes the empirical models used to study the determinants of inhalable dust exposure, using data from 16 factories collected in the third and last cross-sectional phase of this study. Information on activities during the measurements was collected using short job category-specific questionnaires. In addition, questionnaires were completed by factory representatives on the implementation of control measures and changes in production process since the first cross-sectional phase. Mixed effects analyses of variance models were used to identify determinants of exposure, while taking into account the within- and between-worker (random) variance components. The results of these models show that, for any job category, factory is a strong predictor of exposure in this industry. These differences could not be explained entirely by factors such as age of the factory or the control measures implemented since the first phase of the study. Surprisingly, implementation of local exhaust ventilation systems had an effect that was counterintuitive; for example, in warehouses where local exhaust ventilation systems had been implemented, higher dust exposure levels were found compared to those where such control measures had not been installed since the first cross-sectional survey. Season appeared to have some effect on exposure for some job titles, with generally relatively low exposures being found in the summer. Finally, a number of activities were identified that caused higher levels of dust exposure, most notably "changing of filters" and "clean-up of carbon black spills."

Trends in levels of inhalable dust exposure, exceedance and overexposure in the European carbon black manufacturing industry.

In an attempt to investigate the relationship between exposure to carbon black and respiratory morbidity, a study of the complete carbon black manufacturing industry in Western Europe was commissioned. As part of this study, a large number of personal inhalable (n=8015) dust exposure measurements was taken during three phases of data collection between 1987 and 1995. Repeated measurements on the same worker were taken in the last two phases, which enabled the estimation of the within- and between-worker components of variance. Simultaneously, the fixed effects of phase and factory were estimated using mixed-effects analysis of variance. The results show that the personal inhalable dust exposure has reduced significantly since the first phase of the study. In addition, the interaction term between phase and factory was significant in most job categories, confirming that the reduction of exposure was not equal across all factories. When all factories were considered together, the probability that the mean exposure of a randomly selected worker (overexposure) or the probability that the exposure on a randomly selected day for a randomly selected worker (exceedance) was higher than 3.5mg m(-3), was 10% or less for all job categories in the last phase. However, when the factories were considered separately, it appeared that the probability of overexposure or exceedance was in excess of 10% for the job categories 'Fitter/Welder', 'Warehouseman' and 'Site crew' for a number of factories. Therefore, even though exposure levels of inhalable dust have dropped considerably across the whole carbon black manufacturing industry in Western Europe, further reductions in exposure levels are required in these areas to make sure that the probability of overexposure and exceedance falls below a level of 10%.

Risk factors for bronchial hyperresponsiveness in workers exposed to acid anhydrides.

Risk factors for bronchial hyperresponsiveness have previously been established in the general community. In settings where occupational asthma is a risk, it has not been established whether occupational sensitization or measures of exposure are important. Bronchial responsiveness to histamine was measured in a cohort of 506 workers exposed to acid anhydrides. Skin-prick tests were performed with conjugates of phthalic, maleic and trimellitic anhydride with human serum albumin and with common inhalant allergens. Employment and smoking histories were recorded. Occupational exposure was measured using personal air samplers and estimates of past exposure made by retrospective exposure assessment. Three hundred and seventy workers (73%) had bronchial responsiveness measured (median age 39 yrs, range 18-77) and 46 (12%) of these were hyperresponsive (provocative dose causing a 20% fall in forced expiratory volume in one second (FEV1; PD20) < or = 8 micromol). Twelve (3%) of these responsive workers had a skin-prick test reaction to an acid anhydride conjugate, 124 (34%) to a common inhalant allergen, and 148 (40%) were current smokers. Multivariate analysis showed that occupational sensitization, sensitization to a common inhalant allergen, age, and pack-years of smoking were independent risk factors for bronchial hyperresponsiveness. Of these only occupational sensitization was completely independent of baseline FEV1. It is concluded that sensitization to acid anhydrides is a significant risk factor for bronchial hyperresponsiveness. However, measures of personal acid anhydride exposure were not associated with bronchial hyperresponsiveness.

Assessment of the sensitivity of the relation between current exposure to carbon black and lung function parameters when using different grouping schemes.

BACKGROUND: Equations using variance components in exposure data to predict attenuation and standard error of exposure--response slopes have been published recently. However, to date, no comparisons have been made between results of applying these equations to a real data set with the exposure-response relations estimated directly. METHODS: Data on lung function parameters and personal inhalable and respirable dust exposure levels from the European carbon black respiratory health study were used. The predicted attenuation and standard error of the relation between current inhalable and respirable dust levels and lung function parameters (FVC and FEV(1)) were calculated for various exposure grouping schemes. These results were compared with the observed exposure-response relations. Workers were grouped by Job Category, the combination of factory and Job Category and five a posteriori created Exposure Groups. In addition, the individual approach was also used, as exposure data were available for each worker. RESULTS: The rank orders of the coefficients from the regression analyses using the different grouping schemes were similar to those predicted by the equations, although the differences were larger than predicted. When using inhalable dust exposure, the predicted standard errors of the exposure-response slopes were slightly lower than those estimated directly; for respirable dust the predicted standard errors were about a factor two to three smaller than those from the regression analyses. When considering FVC, the predicted exposure-response relations were all statistically significant, whilst the observed relation was only significant when using the five a posteriori Exposure Groups. When reviewing the relations between dust exposure and level of FEV(1), all relations were statistically significant, with the exception of the (observed) relation between respirable dust and FEV(1), when the individual approach was used. CONCLUSIONS: Using different grouping schemes for estimating exposure can have large effects on the slope and standard error of the exposure-response relation. It is, therefore, important that the effect of the different grouping schemes on the level and precision of the exposure-response slope be estimated. Despite violation of most of the assumptions when applying the equations to predict attenuation and the standard error of the exposure-response slope, the similarities in predicted and observed exposure-response relations and standard errors are indicative of the robustness of these equations. Therefore, the equations appear to be a useful tool in establishing the most efficient way of utilizing exposure measurements.

Risk factors for sensitisation and respiratory symptoms among workers exposed to acid anhydrides: a cohort study.

OBJECTIVES: To examine the relation between exposure to acid anhydrides and the risk of developing immediate skin prick test responses to acid anhydride human serum albumin (AA-HSA) conjugates or work related respiratory symptoms; to assess whether these relations are modified by atopy or smoking. METHODS: A cohort of 506 workers exposed to phthalic (PA), maleic (MA), and trimellitic anhydride (TMA) was defined. Workers completed questionnaires relating to employment history, respiratory symptoms, and smoking habits. Skin prick tests were done with AA-HSA conjugates and common inhalant allergens. Exposure to acid anhydrides was measured at the time of the survey and a retrospective exposure assessment was done. RESULTS: Information was obtained from 401 (79%) workers. Thirty four (8.8%) had new work related respiratory symptoms that occurred for the first time while working with acid anhydrides and 12 (3.2%) were sensitised, with an immediate skin prick test reaction to AA-HSA conjugates. Sensitisation to acid anhydrides was associated with work related respiratory symptoms and with smoking at the time of exposure to acid anhydride. When all subjects were included and all three acid anhydrides were taken into account there was no consistent evidence for an exposure-response relation, but with the analysis restricted to a factory where only TMA was in use there was an increased prevalence of sensitisation to acid anhydrides and work related respiratory symptoms with increasing full shift exposure. This relation was apparent within the current occupational exposure standard of 40 micrograms.m-3 and was not modified significantly by smoking or atopy. CONCLUSIONS: Intensity of exposure and cigarette smoking may be risk factors for sensitisation to acid anhydrides. Exposure is also a risk factor for respiratory symptoms. As there was evidence for sensitisation to TMA at full shift exposures within the occupational exposure standard this standard should be reviewed.

Retrospective exposure assessment for a cohort study into respiratory effects of acid anhydrides.

OBJECTIVES: To estimate past exposure to phthalic (PA), trimellitic (TMA) and maleic anhydride (MA) in three alkyd resin and one cushioned flooring factory to estimate exposure-response relations in a retrospective cohort study. METHODS: Personal exposure measurements were carried out in 1992 and quantitative and qualitative information on past exposure and production processes were collected. Job titles were ranked by decreasing exposure and amalgamated into job categories and exposure groups. Multiplication factors for back calculating past exposure levels were estimated with past exposure data, or if no such data were available these factors were estimated by a panel of occupational hygienists. Exposure levels were back calculated starting with the exposure levels in 1992. RESULTS: High exposures to PA were estimated to have occurred among workers operating the PA melting pots in factory 1 (estimated exposure in 1960-9 was 2480 micrograms.m-3). Highest concentrations of TMA were estimated to have occurred among the ink mixers in factory 2 from 1979 to 1986 (554 micrograms.m-3). Exposure in most other job titles was thought to be fairly constant over time for PA, TMA, and MA. CONCLUSIONS: Exposure to acid anhydride at these factories has fallen during the period covered by the study. However, it is estimated that in only one job in factory 2 did past exposure to acid anhydride exceed the current occupational exposure standard. Accuracy of the estimated exposure is limited by a paucity of reliable past exposure data.

Occupational exposure to carbon black in its manufacture: data from 1987 to 1992.

Carbon black is a very pure form of very finely divided particulate carbon used mainly in the automotive tyre industry. Its carbonaceous nature and submicron size (unpelleted) have raised concerns with regard to its ability to affect respiratory morbidity. This paper describes the exposure to carbon black dust in the first and second phase of a large multi-national epidemiological study investigating the magnitude of these exposure-related effects. In Phase I, 1278 respirable dust samples were taken (SIMPEDS cyclone) which increased to 2941 in Phase II with a similar rise in the number of total inhalable dust samples (IOM head) from 1288 in Phase I to 3433 Phase II. Exposure dropped markedly between the two phases with total inhalable dust showing a bigger reduction (49.9%) than respirable dust (42%), although the mean exposure for certain factories and job categories dropped more than others. The data are presented by the 14 job titles/numbers (21-34). The highest mean exposure in both phases and for both dust fractions is experienced by the warehouse packers and they are also most likely to exceed the OES of 3.5 mg m-3 (35.1% of samples in Phase I and 12.0% in Phase II).

Exposure to acid anhydrides in three resin and one cushioned flooring manufacturing plants.

Acid anhydrides are reactive organic chemicals of low molecular weight which cause occupational asthma. No previous research on the relationship between exposure to these chemicals and respiratory sensitization and development of occupational asthma has been reported. A retrospective cohort study was carried out in four factories (three alkyd resin factories and one cushioned flooring factory) to investigate the nature of exposure-response relationships for sensitization to phthalic anhydride (PA), trimellitic anhydride (TMA) and maleic anhydride (MA). This paper describes the results of full-shift and task-specific exposure measurements. Exposure to PA was low in relation to the Occupational Exposure Standard (OES). The highest full-shift PA exposures occurred among resin operators in the resin factory that used solid PA as compared to other resin factories where liquid PA was used. Arithmetic mean exposure levels to TMA and MA in the resin factories were well below their respective OESs. Short-term high exposures occurred during loading of acid anhydrides into the reactors and sampling and testing of the resin. Relatively high full-shift exposure to TMA occurred in the cushioned flooring factory, although no high peak exposures were detected.