Effluent quality improvement in sequencing batch reactor-based wastewater treatment processes using advanced control strategies.

The treatment of wastewater is highly challenging due to large fluctuations in flowrates, pollutants, and variable influent water compositions. A sequencing batch reactor (SBR) and modified SBR cycle-step-feed process (SSBR) configuration are studied in this work to effectively treat municipal wastewater while simultaneously removing nitrogen and phosphorus. To control the amount of dissolved oxygen in an SBR, three axiomatic control strategies (proportional integral (PI), fractional proportional integral (FPI), and fuzzy logic controllers) are presented. Relevant control algorithms have been designed using plant data with the models of SBR and SSBR based on ASM2d framework. On comparison, FPI showed a significant reduction in nutrient levels and added an improvement in effluent quality. The overall effluent quality is improved by 0.86% in FPI in comparison with PI controller. The SSBR, which was improved by precisely optimizing nutrient supply and aeration, establishes a delicate equilibrium. This refined method reduces oxygen requirements while reliably sustaining important biological functions. Focusing solely on the FPI controller's performance in terms of total air volume consumption, the step-feed SBR mechanism achieves an excellent 11.04% reduction in consumption.

In Vivo 3-Dimensional Dynamic Evaluation of Shoulder Kinematics After the Latarjet Procedure: Comparison With the Contralateral Healthy Shoulder.

Background: Researchers have attempted to understand the underlying mechanism of the Latarjet procedure; however, its effects on shoulder kinematics have not been well studied. Purpose/Hypothesis: The purpose was to analyze shoulder kinematics after the Latarjet procedure. It was hypothesized that the nonanatomic transfer of the coracoid process during the procedure would affect normal shoulder kinematics. Study Design: Controlled laboratory study. Methods: The study included 10 patients (age range, 20-52 years) who underwent the modified Latarjet procedure between June 2016 and November 2021. Computed tomography and fluoroscopy were conducted on both shoulder joints of all patients, and 3-dimensional models were reconstructed. The 3-dimensional coordinates were encoded on the reconstructed models, and shoulder kinematics were analyzed through a 3-dimensional-2-dimensional model-image registration technique. Scapular rotation parameters (scapular upward rotation, posterior tilt, external rotation, and scapulohumeral rhythm) were compared between the Latarjet and the nonsurgical contralateral sides during humeral abduction, as was anteroposterior (AP) translation relative to the glenoid center during active humeral external rotation. Results: The Latarjet side displayed significantly higher values of scapular upward rotation at higher degrees of humeral elevation (130°, 140°, and 150°) compared with the nonsurgical side (P = .027). Posterior tilt, external rotation, and scapulohumeral rhythm were not significantly different between sides. AP translation at maximal humeral rotation was not significantly different between sides (Latarjet, -0.06 ± 5.73 mm vs nonsurgical, 5.33 ± 1.60 mm; P = .28). Interestingly, on the Latarjet side, AP translation increased until 40° of humeral rotation (4.27 ± 4.64 mm) but began to decrease from 50° of humeral rotation. Conclusion: The Latarjet side demonstrated significant changes in scapular upward rotation during higher degrees of humeral elevation compared with the contralateral shoulder. Posterior movement of the humeral head at >50° of humeral rotation could be the desired effect of anterior stabilization; however, researchers should evaluate long-term complications such as osteoarthritis. Clinical Relevance: Analysis of shoulder kinematics after the Latarjet procedure could provide information regarding long-term outcomes and whether the procedure would affect the daily activities of patients.

Novel approach to the derivation of dam breach parameters in 2D hydrodynamic modeling of earthquake induced dam failures.

Current methods of dam breach analyses adopt a deterministic approach. Applying these methods to Concrete Faced Rockfill Dams (CFRD) is fraught with huge levels of uncertainty, especially in the context of natural hazards. The frequency and magnitude of rainfall and earthquakes are higher in today's world. In the literature, the complete collapse of dams is modelled on dam breach parameters that define the dam break outflow but are not related to the return periods of natural hazards. As more new dams are constructed to control the floods in intra-plate seismic regions, this study presents a novel approach to the derivation of generalized dam break parameters for CFRD based on the structural analysis of Finite Element Model (FEM) simulations for peak ground accelerations corresponding to 475 and 2475 year return periods. Furthermore, the occurrence of rainfall and earthquake for different return periods are modelled using 2D hydrodynamic simulations. Results show the significance of generalized dam breach parameters for planning and managing CFRDs during earthquakes. The study emphasizes the utilization of structural analysis outputs for the hydraulic modeling of dam breaks, which will result in more specific and accurate dam break parameters. Additionally, the study has shown that the flood risk and the severity will increase with the intensity of earthquake and rainfall magnitudes. Disaster mitigation strategies can be optimized by considering the integrated occurrence of rainfall and earthquakes based on the probability of occurrence, demonstrated using a case-study dam. Another significant outcome of the study is the effect of soil saturation condition during a dam break, which reveals that areas within 40 km of the dam breach location might be worst affected.

3D automatic liver and spleen assessment in predicting overt hepatic encephalopathy before TIPS: a multi-center study.

BACKGROUND: Overt hepatic encephalopathy (HE) should be predicted preoperatively to identify suitable candidates for transjugular intrahepatic portosystemic shunt (TIPS) instead of first-line treatment. This study aimed to construct a 3D assessment-based model to predict post-TIPS overt HE. METHODS: In this multi-center cohort study, 487 patients who underwent TIPS were subdivided into a training dataset (390 cases from three hospitals) and an external validation dataset (97 cases from another two hospitals). Candidate factors included clinical, vascular, and 2D and 3D data. Combining the least absolute shrinkage and operator method, support vector machine, and probability calibration by isotonic regression, we constructed four predictive models: clinical, 2D, 3D, and combined models. Their discrimination and calibration were compared to identify the optimal model, with subgroup analysis performed. RESULTS: The 3D model showed better discrimination than did the 2D model (training: 0.719 vs. 0.691; validation: 0.730 vs. 0.622). The model combining clinical and 3D factors outperformed the clinical and 3D models (training: 0.802 vs. 0.735 vs. 0.719; validation: 0.816 vs. 0.723 vs. 0.730; all p < 0.050). Moreover, the combined model had the best calibration. The performance of the best model was not affected by the total bilirubin level, Child-Pugh score, ammonia level, or the indication for TIPS. CONCLUSION: 3D assessment of the liver and the spleen provided additional information to predict overt HE, improving the chance of TIPS for suitable patients. 3D assessment could also be used in similar studies related to cirrhosis.

The metastatic capacity of high-grade serous ovarian cancer cells changes along disease progression: inhibition by mifepristone.

BACKGROUND: Simplistic two-dimensional (2D) in vitro assays have long been the standard for studying the metastatic abilities of cancer cells. However, tri-dimensional (3D) organotypic models provide a more complex environment, closer to that seen in patients, and thereby provide a more accurate representation of their true capabilities. Our laboratory has previously shown that the antiprogestin and antiglucocorticoid mifepristone can reduce the growth, adhesion, migration, and invasion of various aggressive cancer cells assessed using 2D assays. In this study, we characterize the metastatic capabilities of high-grade serous ovarian cancer cells generated along disease progression, in both 2D and 3D assays, and the ability of cytostatic doses of mifepristone to inhibit them. METHODS: High-grade serous ovarian cancer cells collected from two separate patients at different stages of their disease were used throughout the study. The 2D wound healing and Boyden chamber assays were used to study migration, while a layer of extracellular matrix was added to the Boyden chamber to study invasion. A 3D organotypic model, composed of fibroblasts embedded in collagen I and topped with a monolayer of mesothelial cells was used to further study cancer cell adhesion and mesothelial displacement. All assays were studied in cells, which were originally harvested from two patients at different stages of disease progression, in the absence or presence of cytostatic doses of mifepristone. RESULTS: 2D in vitro assays demonstrated that the migration and invasive rates of the cells isolated from both patients decreased along disease progression. Conversely, in both patients, cells representing late-stage disease demonstrated a higher adhesion capacity to the 3D organotypic model than those representing an early-stage disease. This adhesive behavior is associated with the in vivo tumor capacity of the cells. Regardless of these differences in adhesive, migratory, and invasive behavior among the experimental protocols used, cytostatic doses of mifepristone were able to inhibit the adhesion, migration, and invasion rates of all cells studied, regardless of their basal capabilities over simplistic or organotypic metastatic in vitro model systems. Finally, we demonstrate that when cells acquire the capacity to grow spontaneously as spheroids, they do attach to a 3D organotypic model system when pre-incubated with conditioned media. Of relevance, mifepristone was able to cause dissociation of these multicellular structures. CONCLUSION: Differences in cellular behaviours were observed between 2 and 3D assays when studying the metastatic capabilities of high-grade serous ovarian cancer cells representing disease progression. Mifepristone inhibited these metastatic capabilities in all assays studied.

Optimizing the Surface Structural and Morphological Properties of Silk Thin Films via Ultra-Short Laser Texturing for Creation of Muscle Cell Matrix Model.

Temporary scaffolds that mimic the extracellular matrix's structure and provide a stable substratum for the natural growth of cells are an innovative trend in the field of tissue engineering. The aim of this study is to obtain and design porous 2D fibroin-based cell matrices by femtosecond laser-induced microstructuring for future applications in muscle tissue engineering. Ultra-fast laser treatment is a non-contact method, which generates controlled porosity-the creation of micro/nanostructures on the surface of the biopolymer that can strongly affect cell behavior, while the control over its surface characteristics has the potential of directing the growth of future muscle tissue in the desired direction. The laser structured 2D thin film matrices from silk were characterized by means of SEM, EDX, AFM, FTIR, Micro-Raman, XRD, and 3D-roughness analyses. A WCA evaluation and initial experiments with murine C2C12 myoblasts cells were also performed. The results show that by varying the laser parameters, a different structuring degree can be achieved through the initial lifting and ejection of the material around the area of laser interaction to generate porous channels with varying widths and depths. The proper optimization of the applied laser parameters can significantly improve the bioactive properties of the investigated 2D model of a muscle cell matrix.

Application of Unmanned Aerial Vehicle DEM in flood modeling and comparison with global DEMs: Case study of Atrak River Basin, Iran.

Digital Elevation Models (DEMs) play a significant role in hydraulic modeling and flood risk management. This study initially investigated the effect of Unmanned Aerial Vehicle (UAV) DEM resolutions, ranging from 1 m to 30 m, on flood characteristics, including the inundation area, mean flow depth, and mean flow velocity. Then, the errors of flood characteristics for global DEMs, comprising ALOS (30 m), ASTER (30 m), SRTM (30 m), and TDX (12 m) were quantified using UAV DEM measurements. For these purposes, the HEC-RAS 2D model in steady-state conditions was used to simulate the flood with return periods of 5- to 200 years along 20 km reach of Atrak River located in northeastern Iran. Results indicated when UAV DEM resolution decreased from 1 m to 30 m, inundation area and mean flow depth increased 17.0% (R2 = 0.94) and 10.2% (R2 = 0.96) respectively, while mean flow velocity decreased 16.8% (R2 = -0.94). Validation of the hydraulic modeling using the modified normalized difference water index demonstrated that the HEC-RAS 2D model in conjunction with UAV DEM simulates the flood with ⁓92% accuracy. Comparing the global DEMs with UAV DEM showed that the root mean square error (RMSE) values of the flow depth for ASTER, SRTM, ALOS, and TDX DEMs were 1.77, 1.12, 1.02, and 0.93 m, and the RMSE values of the flow velocity for the same DEMs were 0.81, 0.66, 0.55, and 0.47 m/s, respectively. Furthermore, TDX DEM with a 6.15% error in the inundation area was the nearest to UAV measurements. Overall, TDX DEM revealed a better performance in hydraulic modeling of the fluvial flood characteristics. Hence, it is recommended for environments where high-resolution topography data is scarce. The results of this study could potentially serve as a guideline for selecting global DEMs for hydraulic simulations.

A novel 2-piece rose spiral curve model: Application in epileptic EEG classification.

This paper aimed to provide an innovative 2D phase space model and evaluate its performance in categorizing electroencephalogram (EEG) signals of normal and epileptic patients. The main contributions of the current study are as follows. (1) For the first time, it was proposed a new 2D model based on a 2-piece Rose Spiral Curve (RSC) in EEG analysis. (2) The trajectory patterns of the model were examined for signals of different natures, including constant, periodic, random, and EEG. (3) It was presented some benchmarks for quantifying the trajectory patterns. (4) Applying these measures, support vector machine, Naïve Bayes, AdaBoost, and K-nearest neighbor were used in the epileptic EEG classification problem to estimate the method efficiency. Bonn database, which takes account of EEG signals of healthy, in the course of an epileptic seizure occurrence, and seizure-free cases, was assessed. The results indicated that the proposed framework provided a correct rate of 100% for recognizing healthy subjects and the EEGs with seizure activity. Additionally, seizure-free brain activity was classified with an accuracy of 96.7%. To conclude, the proposed RSC model can be suitable for serving as a computer-aided diagnosis tool for epileptic seizures.

Toxicity comparison of psoralen in 2D /3D hepatocyte models and its effect on mitochondrial fusion and fission / 中国药理学通报

Aim To evaluate and compare the toxicity of psoralen on two-dimensional(2D)and three-dimensional(3D)cultured human hepatocyte HepG2 models. Methods The 3D cell model of HepG2 cells was constructed by low adsorption U-shaped bottom porous plate method. After treated with psoralen for 24 hours, the cell viabilities of 2D and 3D HepG2 cells were detected by CCK-8 assay, LDH leakage was detected by kit, and the mitochondrial membrane potential was detected by TMRM staining. The effect of psoralen on the mRNA of mitochondrial fusion-fission proteins DRP1, Mfn-2 and OPA1 was detected by Q-PCR. Results 3D model maintained a high level of albumin and urea secretion for a long time. And the expression levels of CYP1A2, CYP2E1, CYP3A4 and UGT1A1 in 3D model were higher than those in 2D model. In 3D model lower concentrations of psoralen showed a significant decrease in cell viability, a significant increase in LDH leakage, and a decrease in mitochondrial membrane potential. Q-PCR results showed that psoralen induced a marked increase in the expression of mitochondrial fission protein DRP1, while a significant decrease in mitochondrial fusion protein OPA1. Conclusions A 3D HepG2 cell model is successfully constructed and applied to the evaluation of psoralen hepatotoxicity; the 3D cell culture model is more sensitive to psoralen toxicity, and mitochondria may play a key role in psoralen-induced cell damage.

An Enhanced Sherwood Number to Model the Hydrogen Transport in Membrane Steam Reformers.

It is well known that membrane reactors are inherently two-dimensional systems in which species concentrations vary as a consequence of both the reaction and permeation across the membrane, which occurs in the direction perpendicular to that of the main gas flow. Recently, an expression for an enhanced Sherwood number was developed to describe the hydrogen concentration gradients arising in methane steam-reforming membrane reactors as a consequence of the combined effect of hydrogen production, dispersion, and permeation. Here, the analysis is developed in further detail with the aim of (i) assessing the validity of the simplifying assumptions made when developing the 1D model and (ii) identifying the operating conditions under which it is possible to employ the 1D model with the enhanced Sherwood number.

Welding Temperature Distribution and Residual Stresses in Thick Welded Plates of SA738Gr.B Through Experimental Measurements and Finite Element Analysis.

A numerical and experimental study of welding temperature distribution and residual stresses in thick welded plates of SA738Gr.B was conducted. Within the framework of numerical investigations, the temperature field of SA738 thick plate welding was simulated and analysed by using 2-D modelling technology. The temperature field was checked by using the thermal cycle curve with the aim of increasing the computational accuracy and efficiency, and the temperature field was verified by using the thermal cycle curve and heat affected zone. The welding stress field was analysed based on the temperature field, and the indentation test method was used to verify the stress field, and the error was controlled to within 12.5%. With the help of a welding model established for SA738Gr.B thick-plate welding the sequence was simulated. Seen from welding sequence 1 to welding sequence 3, transverse stress S11 changed significantly, decreasing by 14% and 17% respectively, adjusting the welding sequence can reduce welding residual stresses.

A Novel Triple-Cell Two-Dimensional Model to Study Immune-Vascular Interplay in Atherosclerosis.

Atherosclerosis is a complex inflammatory pathology underpinning cardiovascular diseases (CVD), which are the leading cause of death worldwide. The interplay between vascular stromal cells and immune cells is fundamental to the progression and outcome of atherosclerotic disease, however, the majority of in vitro studies do not consider the implications of these interactions and predominantly use mono-culture approaches. Here we present a simple and robust methodology involving the co-culture of vascular endothelial (ECs) and smooth muscle cells (SMCs) alongside an inflammatory compartment, in our study containing THP-1 macrophages, for studying these complex interactions. Using this approach, we demonstrate that the interaction between vascular stromal and immune cells produces unique cellular phenotypes and soluble mediator profiles not observed in double-cell 2D cultures. Our results highlight the importance of cellular communication and support the growing idea that in vitro research must evolve from mono-culture systems to provide data more representative of the multi-cellular environment found in vivo. The methodology presented, in comparison with established approaches, has the advantage of being technically simple whilst enabling the isolation of pure populations of ECs, SMCs and immune cells directly from the co-culture without cell sorting. The approach described within would be applicable to those studying mechanisms of vascular inflammation, particularly in relation to understanding the impact cellular interaction has on the cumulative immune-vascular response to atherogenic or inflammatory stimuli.

Evaluation of three-dimensional in vivo scapular kinematics and scapulohumeral rhythm between shoulders with a clavicle hook plate and contralateral healthy shoulders.

PURPOSE: Acromioclavicular-coracoclavicular ligament injury occurs frequently, and the clavicle hook plate technique is an easy-to-use treatment method. However, complications such as subacromial impingement syndrome, synovitis, erosion, osteolysis, post-operative pain, and post-operative limitations in range of motion have been reported. We aimed to evaluate the use of the clavicle hook plate in the shoulder joints and to compare in vivo three-dimensional (3D) scapular kinematics and scapulohumeral rhythm between the shoulders with a clavicle hook plate and contralateral normal shoulder joints. METHODS: Ten male patients (aged 40.5 ± 14.4 years) who underwent clavicle hook plate fixation for an acromioclavicular-coracoclavicular ligament injury were selected. Computed tomography and fluoroscopy were conducted on both the shoulder joints, and 3D models were created. Using a 3D-2D model-image registration technique, we determined the 3D coordinates of the scapula, and we measured the scapular kinematics and scapulohumeral rhythm. RESULTS: The values for upward rotation, posterior tilt, and external rotation in the two groups increased in proportion with humeral elevation, showing significant differences between the two groups (p < 0.05). Overall, the value in the clavicle hook plate group (group H) was smaller than that in the control group (group C) by 23.5% (6.7°) of upward rotation and 64.8% (18.9°) of posterior tilt. However, the external rotation in group H was greater than that in group C by 32.3% (2.3°). In overall value, there was a significant difference not in upward rotation and external rotation, but in posterior tilt. During humeral elevation, the overall changes in scapulohumeral rhythm were 4.65 ± 2.45 in group H and 3.8 ± 0.8 in group C, and statistical differences were not detected between the two groups. CONCLUSIONS: Clavicle hook plate fixation changes the scapular kinematics and scapulohumeral rhythm; thus, when clavicle hook plate fixation is complete, the implant should be promptly removed.

In vivo dynamic acromiohumeral distance in shoulders with rotator cuff tears.

BACKGROUND: There are no previous studies on the acromiohumeral distance in shoulders with large-to-massive full-thickness rotator cuff tears. In this study, the acromiohumeral distance in rotator cuff tear and healthy shoulders was measured using 3D-to-2D model-to-image registration techniques. METHODS: The dynamic glenohumeral kinematics during scapular plane abduction and axial rotation were analyzed in 11 rotator cuff tear patients and 10 healthy control subjects. Periodic radiographic images of scapular plane abduction and axial rotation were taken using a flat-panel radiograph image detector. Movements of the shoulder joint were assessed using radiographic images and computed tomography-derived digitally reconstructed radiographs. The acromiohumeral distance was defined as the shortest 3D distance between the acromion and the proximal humerus. FINDINGS: For scapular plane abduction, the rotator cuff tear group had significantly smaller acromiohumeral distance than the control group at 15°, 30°, 45°, 60°, 75°, 135°, and 150° of humeral abduction (P < 0.05 at each measured angle). For axial rotation in the adducted position, the rotator cuff tear group had significantly smaller acromiohumeral distance than the control group at each point between -20° and 40° of glenohumeral external rotation (P < 0.05 at each measured angle). INTERPRETATION: The minimum measured acromiohumeral distance was 0.9 mm in the rotator cuff tear shoulders and 2.1 mm in the healthy shoulders at 90° of scapular plane abduction. The findings are of clinical relevance because quantitative evaluation of the dynamic acromiohumeral distances in rotator cuff tear and healthy shoulders might provide important insight into subacromial impingement.

Dynamic hip kinematics during squatting before and after total hip arthroplasty.

BACKGROUND: The difference in in vivo kinematics before and after total hip arthroplasty (THA) for the same subjects and the clearance between the liner and neck during squatting have been unclear. The purpose of the present study was to clarify (1) the changes in the in vivo kinematics between prosthetic hips and osteoarthritis hips of the same subjects and (2) the extent of the liner-to-neck clearance during squatting under weight-bearing conditions. METHODS: This study consisted of 10 patients who underwent unilateral THA for symptomatic osteoarthritis. Using a flat-panel X-ray detector, we obtained continuous radiographs during squatting. We analyzed the hip joint's movements using three-dimensional-to-two-dimensional model-to-image registration techniques. We also quantified the minimum distance at maximum flexion and extension, and the minimum angle at maximum flexion between the liner and stem neck. RESULTS: The maximum hip flexion angles post-THA (80.7° [range, 69.4-98.6°]) changed significantly compared with the pre-THA values (71.7° [range, 55.2°-91.2°]). The pelvic tilt angle (posterior +, anterior-) at the maximum hip flexion post-THA (10.4° [range, - 6.7° to 26.9°]) was significantly smaller than that at pre-THA (16.6° [range, - 3° to 40.3°]). The minimum anterior and posterior liner-to-neck distances averaged 10.9 and 8.0 mm, respectively, which was a significant difference. The minimum liner-to-neck angle at maximum flexion averaged 34.7° (range, 20.7°-46.3°). No liner-to-neck contact occurred in any of the hips. CONCLUSION: THA increased the range of hip joint motion and the pelvis tilted anteriorly more after than before THA, with sufficient liner-to-neck clearance during squatting. These data may be beneficial for advising patients after THA regarding postoperative activity restrictions in daily life.

Dynamic kinematics of the glenohumeral joint in shoulders with rotator cuff tears.

BACKGROUND: No clear trend has emerged from the literature regarding three-dimensional (3D) translations of the humerus relative to the scapula in shoulders with rotator cuff tears (RCTs). The purpose of this study was to evaluate the kinematics of RCT shoulders using 3D-to-two-dimensional (2D) model-to-image registration techniques. METHODS: Dynamic glenohumeral kinematics during scapular plane abduction and axial rotation were analyzed in 11 RCT patients and 10 healthy control subjects. We measured the 3D kinematic parameters of glenohumeral joints using X-ray images and CT-derived digitally reconstructed radiographs. RESULTS: For scapular plane abduction, the humeral head center was positioned significantly more medially in shoulders with RCTs than in controls at 135° of humeral abduction (p = 0.02; RCTs versus controls: - 0.9 ± 1.6 versus 0.3 ± 1.3 mm). There was no significant difference in the superior/inferior translation of the humeral head center (p = 0.99). For axial rotation in adducted position, the humeral head center was positioned significantly more anteriorly in shoulders with RCTs than in controls at - 30° of glenohumeral external rotation (p < 0.0001; RCTs versus controls: 3.0 ± 1.7 versus 0.3 ± 1.5 mm). CONCLUSIONS: This study revealed the kinematics of shoulders with large to massive full-thickness RCTs: the humeral head center showed a medial shift at the late phase of scapular plane full abduction, and an anterior shift at the internal rotation position during full axial rotation. The kinematic data in this study, which describe the patterns of movement of shoulders with large to massive full-thickness RCTs, provide valuable information for future studies investigating glenohumeral translations in other pathological conditions of the shoulder. For clinical relevance, quantitative assessment of the dynamic kinematics of shoulders with RCTs might be a therapeutic indicator for achieving functional restoration.

Visualization of a cam-type femoroacetabular impingement while squatting using image-matching techniques: a case report.

The in vivo assessment of the three-dimensional (3D) kinematics of the hip in patients with femoroacetabular impingement (FAI) under weight-bearing conditions has not been previously reported. We evaluated the pre- and postoperative hip kinematics of a 34-year-old man, with a cam-type FAI while squatting, using image-matching techniques with measurement of the rim-neck distance. Post-osteochondroplasty, the α-angle improved from 51.0° to 35.5° and the head-neck offset ratio from 0.04 to 0.23. Coxalgia during squatting disappeared, and the Harris Hip Score improved from 79 to 92 at 1 year post-surgery. Postoperative hip kinematic values (3.8° of posterior pelvic tilt and 101.2° of femoral flexion at 96.8° of maximum hip flexion) were similar to the preoperative values (2.9° of posterior pelvic tilt and 102.7° of femoral flexion at 98.8° of maximum hip flexion). Meanwhile, osteochondroplasty improved the minimum rim-neck distance at maximum hip flexion from 2.0 to 10.4 mm. In vivo 3D visualization of the clearance between the femoral head-neck junction and the acetabulum could assist surgeons in adequately identifying the location of impingement and confirming sufficient resection post-operatively.

Evaluation of low impact development approach for mitigating flood inundation at a watershed scale in China.

Low impact development (LID) has attracted growing attention as an important approach for urban flood mitigation. Most studies evaluating LID performance for mitigating floods focus on the changes of peak flow and runoff volume. This paper assessed the performance of LID practices for mitigating flood inundation hazards as retrofitting technologies in an urbanized watershed in Nanjing, China. The findings indicate that LID practices are effective for flood inundation mitigation at the watershed scale, and especially for reducing inundated areas with a high flood hazard risk. Various scenarios of LID implementation levels can reduce total inundated areas by 2%-17% and areas with a high flood hazard level by 6%-80%. Permeable pavement shows better performance than rainwater harvesting against mitigating urban waterlogging. The most efficient scenario is combined rainwater harvesting on rooftops with a cistern capacity of 78.5 mm and permeable pavement installed on 75% of non-busy roads and other impervious surfaces. Inundation modeling is an effective approach to obtaining the information necessary to guide decision-making for designing LID practices at watershed scales.

In vivo kinematic analysis of the glenohumeral joint during dynamic full axial rotation and scapular plane full abduction in healthy shoulders.

PURPOSE: The purpose of this study was to evaluate the kinematics of healthy shoulders during dynamic full axial rotation and scapular plane full abduction using three-dimensional (3D)-to-two-dimensional (2D) model-to-image registration techniques. METHODS: Dynamic glenohumeral kinematics during axial rotation and scapular plane abduction were analysed in 10 healthy participants. Continuous radiographic images of axial rotation and scapular plane abduction were taken using a flat panel radiographic detector. The participants received a computed tomography scan to generate virtual digitally reconstructed radiographs. The density-based digitally reconstructed radiographs were then compared with the serial radiographic images acquired using image correlations. These 3D-to-2D model-to-image registration techniques determined the 3D positions and orientations of the humerus and scapula during dynamic full axial rotation and scapular plane full abduction. RESULTS: The humeral head centre translated an average of 2.5 ± 3.1 mm posteriorly, and 1.4 ± 1.0 mm superiorly in the early phase, then an average of 2.0 ± 0.8 mm inferiorly in the late phase during external rotation motion. The glenohumeral external rotation angle had a significant effect on the anterior/posterior (A/P) and superior/inferior (S/I) translation of the humeral head centre (both p < 0.05). 33.6 ± 15.6° of glenohumeral external rotation occurred during scapular plane abduction. The humeral head centre translated an average of 0.6 ± 0.9 mm superiorly in the early phase, then 1.7 ± 2.6 mm inferiorly in the late phase, and translated an average of 0.4 ± 0.5 mm medially in the early phase, then 1.6 ± 1.0 mm laterally in the late phase during scapular plane abduction. The humeral abduction angle had a significant effect on the S/I and lateral/medial (L/M) translation of the humeral head centre (both p < 0.05). CONCLUSION: This study investigated 3D translations of the humerus relative to the scapula: during scapular plane full abduction, the humerus rotated 33.6° externally relative to the scapula, and during external rotation motion in the adducted position, the humeral head centre translated an average of 2.5 mm posteriorly. Kinematic data will provide important insights into evaluating the kinematics of pathological shoulders. For clinical relevance, quantitative assessment of dynamic healthy shoulder kinematics might be a physiological indicator for the assessment of pathological shoulders.

Dynamic Hip Kinematics During the Golf Swing After Total Hip Arthroplasty.

BACKGROUND: Although most surgeons allow their patients to play golf after total hip arthroplasty (THA), the effect on the implant during the golf swing is still unclear. PURPOSE: To evaluate hip kinematics during the golf swing after THA. STUDY DESIGN: Descriptive laboratory study. METHODS: Eleven hips in 9 patients who underwent primary THA were analyzed. All patients were right-handed recreational golfers, and these 11 hips included 6 right hips and 5 left hips. Periodic radiographic images of the golf swing were taken using a flat-panel x-ray detector. Movements of the hip joint and components were assessed using 3-dimensional-to-2-dimensional model-to-image registration techniques. Liner-to-neck contact and translation of the femoral head with respect to the acetabular cup (cup-head translation) were examined. Hip kinematics, orientation of components, and maximum cup-head translation were compared between patients with and without liner-to-neck contact. RESULTS: On average, the golf swing produced approximately 50° of axial rotation in both lead and trail hips. Liner-to-neck contact was observed in 4 hips with elevated rim liners (2 lead hips and 2 trail hips) at maximum external rotation. Neither bone-to-bone nor bone-to-implant contact was observed at any phases of the golf swing in any of the hips. Four hips with liner-to-neck contact had significantly larger maximum external rotation (37.9° ± 7.0° vs 20.6° ± 9.9°, respectively; P = .01) and more cup anteversion (26.5° ± 6.1° vs 10.8° ± 8.9°, respectively; P = .01) than hips without liner-to-neck contact. No significant differences between hips with and without contact were found for cup inclination (42.0° ± 2.5° vs 38.1° ± 5.5°, respectively; P = .22), combined anteversion (45.3° ± 8.9° vs 51.4° ± 7.9°, respectively; P = .26), or maximum cup-head translation (1.3 ± 0.3 mm vs 1.5 ± 0.4 mm, respectively; P = .61). CONCLUSION: In this analysis, the golf swing did not produce excessive hip rotation or cup-head translation in any hips. However, liner-to-neck contact during the golf swing was observed in 36% of the hips, with unknown effects on the long-term results. CLINICAL RELEVANCE: Golf is an admissible sport after THA because dynamic hip stability was observed. However, the implant position, especially cup anteversion and the use of elevated rim liners, promoted liner-to-neck contact.