Three-dimensional choroidal contour mapping in healthy population.

Purpose was to study 3-dimensional choroidal contour at choroidal inner boundary (CIB) and choroidal outer boundary (COB) in healthy eyes. Healthy eyes imaged on wide field swept-source optical coherence tomography were included. Delineation of CIB and COB was done based on our previously reported methods. Quantitative analysis of the surfaces of CIB and COB was based on analyzing best fit spherical radius (R) (overall and sectoral). One hundred and seven eyes of 74 subjects with a mean age of 46.4 ± 19.3 years were evaluated. Overall, R COB (mean ± SD: 22.5 ± 4.8 mm) < R CIB (32.4 ± 9.4 mm). Central sector had the least R at COB (7.2 ± 5.9 mm) as well as CIB (25.1 ± 14.3 mm) across all age groups. Regression analysis between R (CIB) and age (r = -0.31, r2 = 0.09) showed negative correlation (P < 0.001) and that between R (COB) and age was positive (r = 0.26, r2 = 0.07) (P = 0.01). To conclude, central sector is the steepest sector in comparison to all the other sectors. This is indicative of a prolate shape of choroidal contour at CIB and COB. Outer boundary of choroid is steeper than inner boundary across all age groups. However, with ageing, outer boundary becomes flatter and inner boundary becomes steeper.

Evaluation of Different Techniques and Materials for Filling in 3-dimensional Printed Teeth Replicas with Perforating Internal Resorption by Means of Micro-Computed Tomography.

INTRODUCTION: The aim of this study was to evaluate the filling ability of 2 obturation techniques in 3-dimensional (3D) printed teeth with perforating internal resorption (PIR). METHODS: A maxillary central incisor was instrumented and scanned by micro-computed tomographic (micro-CT) imaging. The 3D model was exported in the stereolithographic format and, with the aid of OrtogOnBlender software (Cícero Moraes, Sinop, SP, Brazil), a PIR in the middle third of the root canal was designed. Thirty-two replicas were printed in surgical resin and distributed into 4 groups (n = 8) according to the obturation technique and the material used: 2 groups used the hybrid technique, 1 with Bio-C Sealer (BCS; Angelus, Londrina, PR, Brazil)/gutta-percha (GP; VDW GmbH, Munich, Germany) + Bio-C Repair (BCR; Angelus, Londrina, PR, Brazil) and the other with BioRoot (BR; Septodont, Saint Maur des Fosses, France)/gutta-percha (GP) + Biodentine (BD; Septodont, Saint Maur des Fosses, France), and 2 groups used the incremental technique, 1 with BCR and the other with BD. Postobturation micro-CT imaging was performed to measure the percentage volume of voids and laser confocal microscopy to measure the surface roughness (µm) of the repair cements. Data were compared using analysis of variance and Kruskal-Wallis tests. RESULTS: Regarding the filling volume in the apical third, the BCS/GP + BCR (89.70 ± 5.15), BR/GP + BD (87.70 ± 8.43), and BCR (84.20 ± 9.00) groups showed the highest percentages compared with the BD group (69.70 ± 6.88) (P < .05). In the area of internal resorption, the BCS/GP + BCR (96.00 ± 2.64) and BCR (95.30 ± 2.93) groups showed the highest percentages compared with the BR/GP + BD group (91.50 ± 1.35) (P < .05). The BD group showed intermediate values that were sometimes similar to the BCS/GP + BCR and BCR groups and similar to the BR/GP + BD group (P > .05). Regarding the quality of the filling in the perforation area, the BCR group showed better results compared with the BD group (P < .001). Regarding roughness, the BCR group (1.66 ± 0.65) showed lower surface roughness compared with the BD group (2.51 ± 0.89) (P < .05). CONCLUSIONS: The capacity and quality of the filling in teeth with PIR were superior with the incremental technique with BCR and the hybrid technique with BCS/GP + BCR.

Three-Dimensional Membranes of Natural Polymer Complex Nanoparticle for Potential Medical Applications.

Skin wound healing is a complex biological process of tissue regeneration in which the wound dressing is crucial for rapid healing; it must protect the wound keep an adequate level of moisture and prevent infections. Alginate (AL), a polysaccharide from brown algae, has been extensively studied for wound treatment, and aloe vera gels (AVGs) have also been used in the treatment of skin. The AVG main bioactive polysaccharide was combined with AL for the preparation of membranes. Two-dimensional membranes were prepared by casting and, for comparison, transparent nanoparticle 3D membranes were produced by high-intensity ultrasonication followed by ionotropic crosslinking. The effects of the amount of AVG, ionotropic gelation, and the structure (2D or 3D) of the AL-AVG membranes were compared. Scanning electron microscopy (SEM) showed higher surface roughness on 3D membranes. Three-dimensional membranes showed a higher swelling ratio, and swelling increased with AVG content and decreased with higher calcium concentration and longer gelation times. The degradation of the membranes was evaluated with and without a lysozyme at pH 5.5, 7.5, and 8.5, to simulate different skin conditions; the results evidence that pH had a higher effect than the enzyme. The cytotoxicity of the membranes was evaluated with ATCC CCL 163 and ATCC CCL 81 cells, and an excellent biocompatibility of both cell types (>90% of cell viability after 48 h incubation) was observed for all AL-AVG membranes.

Evaluation of angles of the tracheobronchial tree with the 3-dimensional reconstruction method: a morphometric and radiologic study / Evaluación de los ángulos del árbol traqueobronquial con el método de reconstrucción tridimensional: un estudio morfométrico y radiológico

SUMMARY: The objective of the current research is to assess the branching angles of the tracheobronchial tree and the correlation between these angles and the lung volume using the 3-dimensional reconstruction method. Thorax CT (computed tomography) images of 150 individuals, who were over 18 years of age and did not have any pathology on CT, were obtained retrospectively. A 3-dimensional reconstruction of the trachea, bronchi, and lungs was carried out. External and internal angles between the trachea and main bronchi, between the main bronchi and lobar bronchi, and between the lobar bronchi were measured. The volume measurement of the right and left lungs was performed. The individuals included in the study were grouped by sex and age (20-40 years, 41-61 years, and 62-87 years). The left subcarinal angle (LSA), total subcarinal angle (TSA), and left interbronchial angle (LIA) were found to be greater in the 62-87 age group. Both the external angle (LULB-LMBE) and the internal angle (LULB- LMBI) between the left upper lobar bronchus and the left main bronchus were observed to be greater in males. In males, a statistically significant negative moderate correlation was identified between the right lung volume and the right subcarinal angle (RSA). In females, a statistically significant positive moderate correlation was revealed between the external (RULB-IBE) and internal angles (RULB-IBI) between the right upper lobar bronchus and the intermediate bronchus, and the right lung volume. In the literature review we performed, we did not find any studies investigating the correlation between the branching angles of the tracheobronchial tree and the lung volume using the 3-dimensional reconstruction method. Therefore, we are of the opinion that our study will contribute to the literature.

El objetivo de la investigación fue evaluar los ángulos de ramificación del árbol traqueobronquial y la correlación entre estos ángulos y el volumen pulmonar utilizando el método de reconstrucción tridimensional. Se obtuvieron retrospectivamente imágenes de tomografía computarizada de tórax de 150 individuos mayores de 18 años sin patología. Se realizó una reconstrucción tridimensional de la tráquea, los bronquios y los pulmones. Se midieron los ángulos externo e interno entre la tráquea y los bronquios principales, entre los bronquios principales y los bronquios lobares, y entre los bronquios lobares. Se realizó la medición del volumen de los pulmones derecho e izquierdo. Los individuos incluidos en el estudio fueron agrupados por sexo y edad (20-40 años, 41-61 años y 62-87 años). Se encontró que el ángulo subcarinal izquierdo, el ángulo subcarinal total y el ángulo interbronquial izquierdo eran mayores en el grupo de edad de 62 a 87 años. Tanto el ángulo externo (LULB-LMBE) como el ángulo interno (LULB-LMBI) entre el bronquio lobular superior izquierdo y el bronquio principal izquierdo era mayor en los hombres. En los hombres, se identificó una correlación moderada negativa estadísticamente significativa entre el volumen pulmonar derecho y el ángulo subcarinal derecho. En mujeres, se reveló una correlación positiva moderada estadísticamente significativa entre los ángulos externos (RULB-IBE) e internos (RULB-IBI) entre el bronquio lobar superior derecho y el bronquio intermedio, y el volumen pulmonar derecho. En la revisión bibliográfica que realizamos, no encontramos ningún estudio que analizara la correlación entre los ángulos de ramificación del árbol traqueobronquial y el volumen pulmonar utilizando el método de reconstrucción tridimensional. Por lo tanto, consideramos que nuestro estudio contribuirá a la literatura especializada del tema.

Morphometric examination of the trachea and bronchi in follow-up computed tomography scans of COVID-19 patients / Examen morfométrico de la tráquea y los bronquios en tomografías computarizadas de seguimiento de pacientes con COVID-19

SUMMARY: The purpose of this study is to evaluate changes in the trachea and bronchi using 3-dimensional reconstruction images obtained from the initial and follow-up computed tomography (CT) scans of COVID-19 patients. A hundred COVID-19 patients over the age of 18 were included in our study. CT images were transferred to Mimics software, and a 3-dimensional reconstruction of the trachea and bronchi was performed. The initial and follow-up CT images of COVID-19 patients were graded as none (grade 0), mild (grade 1), moderate (grade 2), and severe (grade 3) according to the total lung severity score. The patients were divided into progression and regression groups according to the grade increase/decrease between the initial and follow-up CTs. Moreover, the patients were divided into groups as 0-2 weeks, 2-4 weeks, 4-12 weeks, and over 12 weeks according to the duration between the initial and follow-up CTs. The mean cross-sectional area, circumference, and diameter measurements of the right upper lobar bronchus, intermediate bronchus, middle lobar bronchus, and left lower lobar bronchus decreased in the follow-up CTs of the progression group. This decrease was not found to be statistically significant. In the follow-up CTs of the regression group, the left upper lobar bronchus and left lower lobar bronchus measurements increased but not statistically significant. Upon comparing the onset of the disease and the follow-up period, statistically significant changes did not occur in the trachea, main bronchus, and lobar bronchus of COVID-19 patients.

El propósito de este estudio fue evaluar los cambios en la tráquea y los bronquios utilizando imágenes de reconstrucción tridimensionales obtenidas de las tomografías computarizadas (TC) iniciales y de seguimiento de pacientes con COVID-19. En nuestro estudio se incluyeron 100 pacientes con COVID-19 mayores de 18 años. Las imágenes de TC se transfirieron al software Mimics y se realizó una reconstrucción tridimensional de la tráquea y los bronquios. Las imágenes de TC iniciales y de seguimiento de los pacientes con COVID-19 se calificaron como ninguna (grado 0), leve (grado 1), moderada (grado 2) y grave (grado 3) según la puntuación total de gravedad pulmonar. Los pacientes se dividieron en grupos de progresión y regresión según el aumento/disminución del grado entre las TC iniciales y de seguimiento. Además, los pacientes se dividieron en grupos de 0 a 2 semanas, de 2 a 4 semanas, de 4 a 12 semanas y de más de 12 semanas según la duración entre la TC inicial y la de seguimiento. Las mediciones medias del área transversal, la circunferencia y el diámetro del bronquio lobar superior derecho, el bronquio intermedio, el bronquio lobar medio y el bronquio lobar inferior izquierdo disminuyeron en las TC de seguimiento del grupo de progresión. No se encontró que esta disminución fuera estadísticamente significativa. En las TC de seguimiento del grupo de regresión, las mediciones del bronquio lobar superior izquierdo y del bronquio lobar inferior izquierdo aumentaron pero no fueron estadísticamente significativas. Al comparar el inicio de la enfermedad y el período de seguimiento, no ocurrieron cambios estadísticamente significativos en la tráquea, el bronquio principal y el bronquio lobar de los pacientes con COVID-19.

Guided Access Cavity Preparation Using a New Simplified Digital Workflow.

INTRODUCTION: This study evaluated the precision of a simplified workflow using only preoperative cone-beam computed tomographic (CBCT) scans to gain guided access to root canals of extracted mandibular molars. A workflow using CBCT scanning associated with 3-dimensional oral scanning was used as a reference for comparison. The influence of the presence of coronal restoration in the simplified workflow was also evaluated. METHODS: Forty-five mandibular molars were randomized into 3 groups: a control group in which digital planning was performed with CBCT and oral scanning and 2 experimental groups in which digital planning was performed only with CBCT examination. In experimental group 1, teeth had no coronal restorations, whereas in group 2 teeth presented with coronal composite restorations. After digital planning, the teeth were accessed using the guides, and a new CBCT scan was made to overlap the pre- and postoperative examinations. Precision was measured by calculating the deviation between the planned and prepared cavities in millimeters and angle. Data were compared using 1-way analysis of variance (P < .05). RESULTS: All root canals were accessible after access preparation in all tested groups. Deviations of the planned and prepared access cavities were low, with a mean value of 0.55, 0.58, and 0.47 mm and 1.98°, 2.45°, and 1.43° for the control group, group 1, and group 2, respectively. No significant differences in millimeters or angle were observed among the 3 tested groups (P > .05). CONCLUSIONS: The simplified digital workflow using only CBCT examination allowed a high level of precision in obtaining access in extracted molars with and without coronal restoration, presenting similar results compared with the digital workflow using CBCT and 3-dimensional oral scanning.

A new way of analyzing tooth movement using universal coordinate system geometry single point superposition in a 3D model

ABSTRACT Introduction: Superposing 3D models is an imminent need. However, current methods rely on marking multiple points on the maxilla and mandible, which could increase point marking and overlapping errors. Objective: This study aimed at developing a method for superimposing 3D models of the maxillary and mandibular arches with Autodesk Inventor® engineering software, using a single universal coordinate system (UCS) point superposition. Methods: A total of 104 STL (stereolithography) models of the maxillary and mandibular arches exported from My iTero® platform were retrospectively selected, in which T0 and T1 were the initial and refinement periods, respectively (n=26 per group). The X, Y, and Z coordinates associated with a single point in each arch were inserted into the models with SlicerCMF® software for model orientation. The arch models with UCS registration were transferred to Autodesk Inventor® for superimposition and to measure tooth movements performed during Invisalign® treatment. Arch expansion, intrusion and rotation were analyzed by two examiners. The statistics were performed using intraclass correlation coefficients (ICC), Dahlberg's formula, and t-test (p<0.05). Results: A reliable method of superimposing 3D digital models using a single UCS point in the maxilla and mandible was developed. ICC showed excellent intra- and inter-examiner correlation (ICC>0.90). A systematic error was not found concerning linear and angular measurements (<1mm and <1.5°, respectively). Digital dental movements could be analyzed, including arch expansion, dental intrusion, and tooth rotation. Conclusions: The developed method was proven reliable and reproducible for superimposing 3D models of the maxillary and mandibular arches by using UCS system.

RESUMO Introdução: A sobreposição de modelos 3D é uma necessidade iminente. No entanto, os métodos atuais dependem da marcação de múltiplos pontos na maxila e na mandíbula, o que pode aumentar a incorporação de erros no processo de sobreposição. Objetivo: O objetivo desse estudo foi desenvolver um método para sobrepor modelos 3D das arcadas superior e inferior utilizando o software de engenharia Autodesk Inventor®, por meio da marcação de um único ponto em cada arcada, usando o sistema de coordenadas universal (UCS). Métodos: No total, 104 modelos STL das arcadas superior e inferior exportados da plataforma My iTero® foram selecionados retrospectivamente, onde T0 foi o período inicial e T1, o de refinamento (n=26 por grupo). As coordenadas X, Y e Z associadas a um único ponto em cada arcada foram inseridas nos modelos usando o software SlicerCMF®. Os modelos com os pontos UCS demarcados foram transferidos para o software Autodesk Inventor® para realizar a sobreposição e medir os movimentos dentários realizados durante o tratamento com Invisalign®. Os movimentos de expansão, intrusão e rotação foram analisados por dois examinadores. A análise estatística foi realizada usando os coeficientes de correlação intra-classe (ICC), fórmula de Dahlberg e teste t (p<0,05). Resultados: Foi desenvolvido um método confiável de sobreposição de modelos digitais 3D usando um único ponto UCS na maxila e mandíbula. O ICC apresentou excelente correlação intra e inter-avaliadores (ICC>0,90). Não foi encontrado erro sistemático nas medidas lineares e angulares (<1mm e <1,5°, respectivamente). Os movimentos dentários puderam ser analisados por meio do método proposto, incluindo expansão da arcada, intrusão e rotação dentária. Conclusão: O método desenvolvido provou ser confiável e reprodutível para sobreposição de modelos 3D das arcadas superior e inferior usando o sistema UCS com marcação de ponto único.

Treatment of Symptomatic Functional Atrioventricular Block by Cardioneuroablation as an Alternative to Pacemaker Implantation.

A woman with recurrent presyncope caused by a functional atrioventricular (AV) block after meals, with limiting symptoms, underwent cardioneuroablation and AV node vagal denervation without pacemaker implantation. Normal AV conduction was recovered with complete abolishment of symptoms. (Level of Difficulty: Advanced.).

Successful Closure of Paravalvular Leak Using Computed Tomography Image Fusion and Planning With 3-Dimensional Printing.

The presence of moderate to severe paravalvular leak increases mortality. We present a case of giant paravalvular leak closure using the 3-dimensional printing model to assess the success of the device to be used for its closure, computed tomography was performed for planning and guiding the procedure by image fusion. (Level of Difficulty: Advanced.).

Recurrent Cardiac Sarcoma Resection With Modified Partial Autotransplantation.

Primary cardiac sarcomas are very aggressive, being a challenge to cardio-oncology specialty. Surgical planning and innovative techniques have enhanced the possibility of resection. We have described a case of recurrent primary left atrium angiosarcoma, successfully resected with a modified partial autotransplantation technique, planned using a 3-dimensional model created from computed tomography. (Level of Difficulty: Intermediate.).

Coronary Ostia Localization by 3-Dimensional Transesophageal Echocardiography in a Patient With Quadricuspid Aortic Valve.

Quadricuspid aortic valve is rare and requires surgery when symptomatic severe regurgitation/stenosis is present. Associated anomalous coronary ostia location demands accurate diagnosis to avoid intraoperative complications, and several imaging techniques have been used, with drawbacks of low sensitivity, radiation and contrast exposure. We report a pre-operative assessment using 3-dimensional echocardiography. (Level of Difficulty: Intermediate.).

Multimodal image analysis and subvalvular dynamics in ischemic mitral regurgitation.

Background: The exact geometric pathogenesis of leaflet tethering in ischemic mitral regurgitation (IMR) and the relative contribution of each component of the mitral valve complex (MVC) remain largely unknown. In this study, we sought to further elucidate mitral valve (MV) leaflet remodeling and papillary muscle dynamics in an ovine model of IMR with magnetic resonance imaging (MRI) and 3-dimensional echocardiography (3DE). Methods: Multimodal imaging combining 3DE and MRI was used to analyze the MVC at baseline, 30 minutes post-myocardial infarction (MI), and 12 weeks post-MI in ovine IMR models. Advanced 3D imaging software was used to trace the MVC from each modality, and the tracings were verified against resected specimens. Results: 3DE MV remodeling was regionally heterogenous and observed primarily in the anterior leaflet, with significant increases in surface area, especially in A2 and A3. The posterior leaflet was significantly shortened in P2 and P3. Mean posteromedial papillary muscle (PMPM) volume was decreased from 1.9 ± 0.2 cm3 at baseline to 0.9 ± 0.3 cm3 at 12 weeks post-MI (P < .05). At 12 weeks post-MI, the PMPM was predominately displaced horizontally and outward along the intercommissural axis with minor apical displacement. The subvalvular contribution to tethering is a combination of unilateral movement, outward displacement, and degeneration of the PMPM. These findings have led to a proposed new framework for characterizing PMPM dynamics in IMR. Conclusions: This study provides new insights into the complex interrelated and regionally heterogenous valvular and subvalvular mechanisms involved in the geometric pathogenesis of IMR tethering.

Added Value of 3- Versus 2-Dimensional Echocardiography Left Ventricular Ejection Fraction to Predict Arrhythmic Risk in Patients With Left Ventricular Dysfunction.

OBJECTIVES: This study sought to evaluate the potential clinical impact of using 3-dimensional echocardiography (3DE) to measure left ventricular ejection fraction (LVEF) in patients considered for implantable cardioverter-defibrillator (ICD) implantation and to assess the predictive value of 3DE LVEF for arrhythmic events. BACKGROUND: ICD therapy is currently recommended to prevent sudden cardiac death in patients with symptomatic heart failure and LVEF ≤35%, and in asymptomatic patients with ischemic heart disease and LVEF ≤30%. Two-dimensional echocardiography (2DE) is currently used to calculate LVEF. However, 3DE has been reported to be more reproducible and accurate than 2DE to measure LVEF. METHODS: The study prospectively enrolled 172 patients with LV dysfunction (71% ischemic). Both 2DE and 3DE LVEF were obtained during the same study. The outcome was the occurrence of major arrhythmic events (sudden cardiac death, aborted cardiac arrest, appropriate ICD therapy). RESULTS: After a median follow up of 56 (range 18 to 65) months, major arrhythmic events occurred in 30% of the patients. Compared with 2DE, 3DE changed the assignment above or below the LVEF thresholds for ICD implantation in 20% of patients, most of them having 2DE LVEFs within ± 10% from threshold. By cause-specific hazard model, 3DE LVEF was the only independent predictor of the occurrence of major arrhythmic events. CONCLUSIONS: LVEF by 3DE was an independent predictor of major arrhythmic events and improved arrhythmic risk prediction in patients with LV dysfunction. When compared with 2DE LVEF, 3DE measurement of LVEF may change the decision to implant an ICD in a sizable number of patients.

First-Trimester Diagnosis of Agnathia-Otocephaly Complex: A Series of 4 Cases and Review of the Literature.

First-trimester ultrasound findings in 4 fetuses with agnathia-otocephaly complex are described. In addition, information from 3 cases reported in the literature was also reviewed, for a total of 7 cases analyzed. All 7 fetuses presented with agnathia and 6 with ventrocaudal displacement of the ears (melotia/synotia). Four fetuses had holoprosencephaly. In 6 cases, the parents opted for termination of pregnancy. The remaining case resulted in premature delivery at 26 weeks due to severe polyhydramnios and early neonatal death. This report highlights the important role of ultrasound in the identification of agnathia-otocephaly complex in the first trimester of pregnancy.

Aortic Regurgitation in Acute Type-A Aortic Dissection: A Clinical Classification for the Perioperative Echocardiographer in the Era of the Functional Aortic Annulus.

The functional aortic annulus offers a clinical approach for the perioperative echocardiographer to classify the mechanisms of aortic regurgitation in acute type-A dissection. Comprehensive examination of the functional aortic annulus in this setting using transesophageal echocardiography can guide surgical therapy for the aortic root by considering the following important aspects: severity and mechanism of aortic regurgitation, extent of root dissection, and the pattern of coronary artery involvement. The final choice of surgical therapy also should take into account factors, such as patient presentation and surgical experience, to limit mortality and morbidity from this challenging acute aortic syndrome. This review explores these concepts in detail within the framework of the functional aortic annulus, detailed anatomic considerations, and the latest literature.

Kicking Performance and Muscular Strength Parameters with Dominant and Nondominant Lower Limbs in Brazilian Elite Professional Futsal Players.

The aims of the current study were to analyze a kick from 10 m in a futsal context and the parameters of muscular strength using an isokinetic dynamometer in a laboratory environment, performed with the dominant (DL) and nondominant lower limbs (NDL). Seventeen professional elite players participated. Kicking performance was evaluated from the second penalty mark. Next, athletes completed a strength evaluation with an isokinetic dynamometer at speeds of 60°â‹…s-1, 180°â‹…s-1, and 300°â‹…s-1. Significant differences were observed for hip (15.64 ± 3.44; 13.97 ± 2.62), ankle (63.19 ± 8.90; 52.55 ± 8.72), foot (82.31 ± 7.93; 68.41 ± 7.85), and ball (99.74 ± 8.45; 88.31 ± 7.93) speeds (km⋅h-1), and average power at 180°â‹…s-1 (325.59 ± 40.47; 315.79 ± 39.49 W), but not for accuracy (1.33 ± 0.57; 1.66 ± 0.77 m) between the DL and NDL, respectively. Few moderate correlations were observed in the DL (r = .54-.64) or NDL (r = .53-.55) between the kinematic variables of kick and muscular strength parameters (P < .05). We conclude that highly trained players present asymmetries in kicking motion; however, the imbalance in muscular strength is very small. We recommend that specific court tests be conducted to reliably characterize kicking performance in futsal. Success in kicking seems to be too variable and complex to be totally predicted only by joints, foot and ball speed, and lower limb muscular strength parameters.