Single-camera photogrammetry using a mobile phone for low-cost documentation of corpses.

Photogrammetry is a technique for studying and defining objects' shape, dimension, and position in a three-dimensional space using measurements obtained from two-dimensional photographs. It has gained popularity following the development of computer graphics technologies and has been applied to various branches of medicine. In this study, the authors present a method for low-cost photorealistic documentation of corpses during autopsy using single-camera photogrammetry with a mobile phone. Besides representing the body by demonstrating the injured and non-injured body parts as control, evidencing the body parts on a 3D reconstruction allows easy explanation to nonmedical experts such as lawyers.

Development and Validation of Novel Z-360-Based Macromolecules for the Active Targeting of CCK2-R.

The cholecystokinin type 2 receptor (CCK2-R) represents an ideal target for cancer therapy since it is overexpressed in several tumors and is associated with poor prognosis. Nastorazepide (Z-360), a selective CCK2-R antagonist, has been widely investigated as a CCK2-R ligand for targeted therapy; however, its high hydrophobicity may represent a limit to cell selectivity and optimal in vivo biodistribution. Here, we present three new fluorescent Z-360 derivatives (IP-002G-Rho, IP-002L-Rho, and IP-002M-Rho) in which nastorazepide was linked, through spacers bearing different saccharides (glucose (G), lactose (L), and maltotriose (M)), to sulforhodamine B. A fourth compound (IP-002H-Rho) with no pendant sugar was also synthesized as a control. Through two-dimensional (2D) and three-dimensional (3D) in vitro studies, we evaluated the compound association with and selectivity for CCK2-R-overexpressing cells (A431-CCK2-R+) vs CCK2-R-underexpressing cells (A431 WT). 2D in vitro studies highlighted a progressive increase of IP-002x-Rho association with A431-CCK2-R+ cells according to the linker hydrophilicity, that is, maltotriose > lactose > glucose > hydrogen, with IP-002M-Rho showing a 2.4- and a 1.36-fold higher uptake than IP-002G-Rho and IP-002L-Rho, respectively. Unexpectedly, IP-002H-Rho showed a similar cell association to that of IP-002L-Rho but with no difference between the two tested cell lines. On the contrary, association with A431-CCK2-R+ cells as compared to the A431 WT was found to be 1.08-, 1.14-, and 1.37-fold higher for IP-002G-Rho, IP-002L-Rho, and IP-002M-Rho, respectively, proving IP-002M-Rho to be the best-performing compound, as also confirmed by competition studies. Trafficking studies on A431-CCK2-R+ cells incubated with IP-002M-Rho suggested the coexistence of receptor-mediated endocytosis and simple diffusion. On the contrary, a high and selective uptake of IP-002M-Rho by A431-CCK2-R+ cells only was observed on 3D scaffolds embedded with cells, underlining the importance of 3D models in in vitro preliminary evaluation.

Low-Cost 3D Models for Cervical Spine Tumor Removal Training for Neurosurgery Residents.

BACKGROUND AND OBJECTIVES: Spinal surgery, particularly for cervical pathologies such as myelopathy and radiculopathy, requires a blend of theoretical knowledge and practical skill. The complexity of these conditions, often necessitating surgical intervention, underscores the need for intricate understanding and precision in execution. Advancements in neurosurgical training, especially with the use of low-cost 3D models for simulating cervical spine tumor removal, are revolutionizing this field. These models provide the realistic and hands-on experience crucial for mastering complex neurosurgical techniques, filling gaps left by traditional educational methods. MATERIALS AND METHODS: This study aimed to assess the effectiveness of 3D-printed cervical vertebrae models in enhancing surgical skills, focusing on tumor removal, and involving 20 young neurosurgery residents. These models, featuring silicone materials to simulate the spinal cord and tumor tissues, provided a realistic training experience. The training protocol included a laminectomy, dural incision, and tumor resection, using a range of microsurgical tools, focusing on steps usually performed by senior surgeons. RESULTS: The training program received high satisfaction rates, with 85% of participants extremely satisfied and 15% satisfied. The 3D models were deemed very realistic by 85% of participants, effectively replicating real-life scenarios. A total of 80% found that the simulated pathologies were varied and accurate, and 90% appreciated the models' accurate tactile feedback. The training was extremely useful for 85% of the participants in developing surgical skills, with significant post-training confidence boosts and a strong willingness to recommend the program to peers. CONCLUSIONS: Continuing laboratory training for residents is crucial. Our model offers essential, accessible training for all hospitals, regardless of their resources, promising improved surgical quality and patient outcomes across various pathologies.

Ultrastructural analysis and 3D reconstruction of the frontal sensory-glandular complex and its neural projections in the platyhelminth Macrostomum lignano.

The marine microturbellarian Macrostomum lignano (Platyhelminthes, Rhabditophora) is an emerging laboratory model used by a growing community of researchers because it is easy to cultivate, has a fully sequenced genome, and offers multiple molecular tools for its study. M. lignano has a compartmentalized brain that receives sensory information from receptors integrated in the epidermis. Receptors of the head, as well as accompanying glands and specialized epidermal cells, form a compound sensory structure called the frontal glandular complex. In this study, we used semi-serial transmission electron microscopy (TEM) to document the types, ultrastructure, and three-dimensional architecture of the cells of the frontal glandular complex. We distinguish a ventral compartment formed by clusters of type 1 (multiciliated) sensory receptors from a central domain where type 2 (collar) sensory receptors predominate. Six different types of glands (rhammite glands, mucoid glands, glands with aster-like and perimaculate granula, vacuolated glands, and buckle glands) are closely associated with type 1 sensory receptors. Endings of a seventh type of gland (rhabdite gland) define a dorsal domain of the frontal glandular complex. A pair of ciliary photoreceptors is closely associated with the base of the frontal glandular complex. Bundles of dendrites, connecting the receptor endings with their cell bodies which are located in the brain, form the (frontal) peripheral nerves. Nerve fibers show a varicose structure, with thick segments alternating with thin segments, and are devoid of a glial layer. This distinguishes platyhelminths from larger and/or more complex invertebrates whose nerves are embedded in prominent glial sheaths.

Using Patient-Specific 3D Modeling and Simulations to Optimize Microwave Ablation Therapy for Liver Cancer.

Microwave ablation (MWA) of liver tumors presents challenges like under- and over-ablation, potentially leading to inadequate tumor destruction and damage to healthy tissue. This study aims to develop personalized three-dimensional (3D) models to simulate MWA for liver tumors, incorporating patient-specific characteristics. The primary objective is to validate the predicted ablation zones compared to clinical outcomes, offering insights into MWA before therapy to facilitate accurate treatment planning. Contrast-enhanced CT images from three patients were used to create 3D models. The simulations used coupled electromagnetic wave propagation and bioheat transfer to estimate the temperature distribution, predicting tumor destruction and ablation margins. The findings indicate that prolonged ablation does not significantly improve tumor destruction once an adequate margin is achieved, although it increases tissue damage. There was a substantial overlap between the clinical ablation zones and the predicted ablation zones. For patient 1, the Dice score was 0.73, indicating high accuracy, with a sensitivity of 0.72 and a specificity of 0.76. For patient 2, the Dice score was 0.86, with a sensitivity of 0.79 and a specificity of 0.96. For patient 3, the Dice score was 0.8, with a sensitivity of 0.85 and a specificity of 0.74. Patient-specific 3D models demonstrate potential in accurately predicting ablation zones and optimizing MWA treatment strategies.

Effect of hot water maceration, rehydration, and soft tissue presence on 3D geometry of bone.

PURPOSE: In forensic medicine, maceration is often essential for examining bone surfaces, serving purposes such as identifying cut marks, making geometric measurements, and determining the victim's age. While hot water maceration removes soft tissue effectively, it is known to cause bone surface shrinkage. This raises the question of whether this effect is permanent or if it can be partially reversed through rehydration, considering the presence of soft tissue. METHODS: Computed tomography (CT) scans were conducted on the radii of 20 paired human anatomic forearm specimens. Subsequently, the radii were extracted, macerated in 60 °C water, CT-scanned in an air environment, rehydrated, re-implanted into the forearms, and CT-scanned again. RESULTS: Maceration resulted in a mean shrinkage of 0.12 mm on the outer bone surface. This shrinkage was nearly fully recoverable for the diaphysis after rehydration and accounting for soft tissue surrounding the bone. In contrast, the epiphysis showed permanent shrinkage, likely due to the loss of small bone fragments. Analysis of the inner bone surface indicated a smaller effect, but with significant standard deviations, especially for the epiphysis, possibly related to the less well-defined nature of the inner bone surface. CONCLUSION: The epiphyseal surface of hot water-macerated bone will, on average, be approximately 0.15 mm deflated and cannot retain the original surface. On the other hand, the diaphyseal surface is less affected and can be nearly completely restored after rehydration and accounting for soft tissue surrounding the bone.

Exploration of different electrode types inserted in a 3D model of a patient with incomplete partition type III inner ear malformation.

BACKGROUND: Incomplete partition type III (IP III) represents a rare malformation of the inner ear, posing challenges during cochlear implantation due to inevitable cerebrospinal fluid (CSF) leaks and the potential misplacement of electrodes within the internal auditory canal (IAC). Despite the absence of a consensus on electrode selection, literature suggests both straight and perimodiolar electrodes as viable options for proper insertion. Limited implantation series contribute to the ambiguity in electrode choice. In this study, we evaluated the insertion performance of three electrode types in a 3D model simulating an IP III patient's inner ear. METHODS: A 3D model replicating the inner ear of a patient with IP III undergoing surgery was created, incorporating a canal wall up mastoidectomy and an enlarged round window approach. Insertions were carried out using a straight electrode, a perimodiolar electrode, and a slim perimodiolar electrode, inserted through a sheath in the basal turn of the cochlea. Electrode positions were assessed after each insertion, with each type being tested 20 times. RESULTS: Successful insertion rates were 95 % for the slim perimodiolar electrode, 85 % for the perimodiolar electrode, and 75 % for the slim straight electrode. Notably, the slim perimodiolar electrode required an adapted insertion technique due to the altered cochlear position in IP III cases. Statistical analysis revealed the slim perimodiolar electrode's superiority over the slim straight electrode in achieving successful insertions. CONCLUSIONS: The 3D model of the IP III inner ear proved to be an effective tool for electrode testing and insertion training prior to surgery. Following multiple insertions in the 3D model, the slim perimodiolar electrode demonstrated the highest success rate, emphasizing its potential as the preferred choice for cochlear implantation in IP III cases.

Enhancing Hip Arthroplasty Outcomes: The Multifaceted Advantages, Limitations, and Future Directions of 3D Printing Technology.

In the evolving field of orthopedic surgery, the integration of three-dimensional printing (3D printing) has emerged as a transformative technology, particularly in addressing the rising incidence of degenerative joint diseases. The integration of 3D printing technology in hip arthroplasty offers substantial advantages throughout the surgical process. In preoperative planning, 3D models enable meticulous assessments, aiding in accurate implant selection and precise surgical strategies. Intraoperatively, the technology contributes to precise prosthesis design, reducing operation duration, X-ray exposures, and blood loss. Beyond surgery, 3D printing revolutionizes medical equipment production, imaging, and implant design, showcasing benefits such as enhanced osseointegration and reduced stress shielding with titanium cups. Challenges include a higher risk of postoperative infection due to the porous surfaces of 3D-printed implants, technical complexities in the printing process, and the need for skilled manpower. Despite these challenges, the evolving nature of 3D printing technologies underscores the importance of relying on existing orthopedic surgical practices while emphasizing the need for standardized guidelines to fully harness its potential in improving patient care.

3D evaluation of sagittal inclination of the maxillary dentition in relation to facial landmarks: A cohort study.

BACKGROUND: The determination of the maxillary occlusal plane presents a significant clinical challenge in the treatment of edentulous patients as well as it is critical for complex full-mouth reconstructions in dentate patients, including those with implant-supported rehabilitations. While the use of a Fox plane plate is standard in edentulous cases, its application in dentate patients lacks thorough documentation in existing literature. PURPOSE: This clinical study assessed the sagittal position of the maxillary dentition in relation to facial landmarks using a digital three-dimensional analysis and evaluated the suitability and reliability of applying a simulated Fox plane plate, also known as an occlusal plane guide, in dentate patients. MATERIALS AND METHODS: Eighty-one subjects were recruited at the Department of Prosthetic Dentistry of Goethe University Frankfurt, Germany, according to specific inclusion criteria. Intraoral and facial scans were obtained and analyzed using GOM Inspect Pro software (GOM, Braunschweig, Germany). The angles between the maxillary occlusal plane and three variations each of Camper's plane and ala-tragus line, relating to superior, middle, and inferior tragus points, were measured. These modified planes were then compared to a plane established by a simulated digital Fox plane plate, which was adapted to the maxillary anterior teeth and the lowest point of the posterior teeth in both quadrants. RESULTS: A total of 81 subjects (58 female and 23 male) with a mean age of 23.9 years were evaluated in this study. No significant angular difference was found between the angles of the maxillary occlusal plane compared with superior Camper's plane, middle Camper's plane, or superior ala-tragus line (p >0.05). The smallest angle occurred between superior Camper's plane and the maxillary occlusal plane on both the right (3.443°) and left (3.535°) sides. The application of a Fox plane plate resulted in two different occlusal planes in 70% of patients, significantly deviating from the digitally determined plane (p <0.05). CONCLUSION: Superior and middle Camper's planes, along with superior ala-tragus line, can be considered approximately parallel reference planes and are suitable for routine determining of the maxillary occlusal plane in restorative treatments. However, in contrast to digital evaluation methods, the application of a Fox plane plate in dentate patients showed high variability, indicating its low reproducibility due to its ambiguous positioning on the maxillary dentition. Clinical trial registration site: https://drks.de/search/de/trial/DRKS00030166.

Quantitative assessment and objective improvement of the accuracy of neurosurgical planning through digital patient-specific 3D models.

Objective: Neurosurgical patient-specific 3D models have been shown to facilitate learning, enhance planning skills and improve surgical results. However, there is limited data on the objective validation of these models. Here, we aim to investigate their potential for improving the accuracy of surgical planning process of the neurosurgery residents and their usage as a surgical planning skill assessment tool. Methods: A patient-specific 3D digital model of parasagittal meningioma case was constructed. Participants were invited to plan the incision and craniotomy first after the conventional planning session with MRI, and then with 3D model. A feedback survey was performed at the end of the session. Quantitative metrics were used to assess the performance of the participants in a double-blind fashion. Results: A total of 38 neurosurgical residents and interns participated in this study. For estimated tumor projection on scalp, percent tumor coverage increased (66.4 ± 26.2%-77.2 ± 17.4%, p = 0.026), excess coverage decreased (2,232 ± 1,322 mm2-1,662 ± 956 mm2, p = 0.019); and craniotomy margin deviation from acceptable the standard was reduced (57.3 ± 24.0 mm-47.2 ± 19.8 mm, p = 0.024) after training with 3D model. For linear skin incision, deviation from tumor epicenter significantly reduced from 16.3 ± 9.6 mm-8.3 ± 7.9 mm after training with 3D model only in residents (p = 0.02). The participants scored realism, performance, usefulness, and practicality of the digital 3D models very highly. Conclusion: This study provides evidence that patient-specific digital 3D models can be used as educational materials to objectively improve the surgical planning accuracy of neurosurgical residents and to quantitatively assess their surgical planning skills through various surgical scenarios.

hiPSC-derived macrophages improve drug sensitivity and selectivity in a macrophage-incorporating organoid culture model.

Accurate simulation of different cell type interactions is crucial for physiological and precisein vitrodrug testing. Human tissue-resident macrophages are critical for modulating disease conditions and drug-induced injuries in various tissues; however, their limited availability has hindered their use inin vitromodeling. Therefore, this study aimed to create macrophage-containing organoid co-culture models by directly incorporating human-induced pluripotent stem cell (hiPSC)-derived pre-macrophages into organoid and scaffold cell models. The fully differentiated cells in these organoids exhibited functional characteristics of tissue-resident macrophages with enriched pan-macrophage markers and the potential for M1/M2 subtype specialization upon cytokine stimulation. In a hepatic organoid model, the integrated macrophages replicated typical intrinsic properties, including cytokine release, polarization, and phagocytosis, and the co-culture model was more responsive to drug-induced liver injury than a macrophage-free model. Furthermore, alveolar organoid models containing these hiPSC-derived macrophages also showed increased drug and chemical sensitivity to pulmonary toxicants. Moreover, 3D adipocyte scaffold models incorporating macrophages effectively simulated in vivo insulin resistance observed in adipose tissue and showed improved insulin sensitivity on exposure to anti-diabetic drugs. Overall, the findings demonstrated that incorporating hiPSC-derived macrophages into organoid culture models resulted in more physiological and sensitivein vitrodrug evaluation and screening systems.

Sensory neurons increase keratinocyte proliferation through CGRP release in a tissue engineered in vitro model of innervation in psoriasis.

Skin denervation has been shown to cause remission of psoriatic lesions in patients, which can reappear if reinnervation occurs. This effect can be induced by the activation of dendritic cells through sensory innervation. However, a direct effect of nerves on the proliferation of keratinocytes involved in the formation of psoriatic plaques has not been investigated. We developed, by tissue engineering, a model of psoriatic skin made of patient skin cells that showed increased keratinocyte proliferation and epidermal thickness compared to healthy controls. When this model was treated with CGRP, a neuropeptide released by sensory neurons, an increased keratinocyte proliferation was observed in the psoriatic skin model, but not in the control. When a sensory nerve network was incorporated in the psoriatic model and treated with capsaicin to induce neuropeptide release, an increase of keratinocyte proliferation was confirmed, which was blocked by a CGRP antagonist while no difference was noticed in the innervated healthy control. We showed that sensory neurons can participate directly to keratinocyte hyperproliferation in the formation of psoriatic lesions through the release of CGRP, independently of the immune system. Our unique tissue-engineered innervated psoriatic skin model could be a valuable tool to better understand the mechanism by which nerves may modulate psoriatic lesion formation in humans. STATEMENT OF SIGNIFICANCE: This study shows that keratinocytes extracted from patients' psoriatic skin retain, at least in part, the disease phenotype. Indeed, when combined in a 3D model of tissue-engineered psoriatic skin, keratinocytes exhibited a higher proliferation rate, and produced a thicker epidermis than a healthy skin control. In addition, their hyperproliferation was aggravated by a treatment with CGRP, a neuropeptide released by sensory nerves. In a innervated model of tissue-engineered psoriatic skin, an increase in keratinocyte hyperproliferation was also observed after inducing neurons to release neuropeptides. This effect was prevented by concomitant treatment with an antagonist to CGRP. Thus, this study shows that sensory nerves can directly participate to affect keratinocyte hyperproliferation in psoriasis through CGRP release.

Utilizing 3-dimensional models to assess keel bone damage in laying hens throughout the lay cycle.

The global egg industry is rapidly transitioning to cage-free egg production from conventional cages. Hens housed in cage-free systems have an increased prevalence of keel damage that could lead to reduced egg production and compromised well-being. The objective of this study was to determine the effects of dietary supplementation of n-3 fatty acids and vitamin D3 on keel damage in hens housed in multi-tier aviary systems (AV). Brown hens were placed in 4 AV system rooms after rearing at 17 wk of age (woa) with each room containing 576 birds. At 12 woa, rooms were randomly assigned to a dietary treatment of flaxseed oil, fish oil, vitamin D3, or control. Focal birds (36 per treatment) were longitudinally examined for keel damage using quantitative computed tomography (QCT) at nine timepoints from 16 to 52 woa. Three-dimensional digital twins of the keels were created from the QCT scans and visually assessed for damage. An overall keel severity score was recorded as well as the location, direction, and severity of each deviation or fracture. Severity was ranked on a 0 to 5 scale with 0 being no damage and 5 being severe. Damage scores were analyzed utilizing odds ratios with main effects of age and treatment. At 16 woa, 80% of hens had overall keel scores of 0 and 20% had scores of 1. At 52 woa, all hens had damage, with 31% having a score of 1, 61% scored 2 to 3, and 8% scored 4 to 5. Most fractures were not observed until peak lay. Dietary treatments did not affect likelihood of fracture incidences, but younger birds had lower odds of incurring keel fractures than older birds (P < 0.0001). The initial incidences of keel deviations occurred earlier than fractures, with most birds obtaining a keel deviation by 28 woa. Keel damage was not able to be prevented, but the age at which keel fractures and deviations initiate appear to be different, with deviations occurring during growth and fractures during lay.

Local Mechanical Modulation-Driven Evagination in Invaginated Epithelia.

Local cells can actively create reverse bending (evagination) in invaginated epithelia, which plays a crucial role in the formation of elaborate organisms. However, the precise physical mechanism driving the evagination remains elusive. Here, we present a three-dimensional vertex model, incorporating the intrinsic cell polarity, to explore the complex morphogenesis induced by local mechanical modulations. We find that invaginated tissues can spontaneously generate local reverse bending due to the shift of the apicobasal polarity. Their exact shapes can be analytically determined by the local apicobasal differential tension and the internal stress. Our continuum theory exhibits three regions in a phase diagram controlled by these two parameters, showing curvature transitions from ordered to disordered states. Additionally, we delve into epithelial curvature transition induced by the nucleus repositioning, revealing its active contribution to the apicobasal force generation. The uncovered mechanical principles could potentially guide more studies on epithelial folding in diverse systems.

3D printed temporal bones for preoperative simulation and planning.

OBJECTIVE: Demonstrate the utility of 3D printed temporal bone models in individual patient preoperative planning and simulation. METHODS: 3D models of the temporal bone were made from 5 pediatric and adult patients at a tertiary academic hospital with challenging surgical anatomy planned for cochlear implantation or exteriorization of cholesteatoma with complex labyrinthine fistula. The 3D models were created from CT scan used for preoperative planning, simulation and intraoperative reference. The utility of models was assessed for ease of segmentation and production and impact on surgery in regard to reducing intraoperative time and costs, improving safety and efficacy. RESULTS: Three patients received cochlear implants, two exteriorization of advanced cholesteatoma with fistulas (1 internal auditory canal/cochlea, 1 all three semicircular canals). Surgical planning and intraoperative referencing to the simulations by the attending surgeon and trainees significantly altered original surgical plans. In a case of X-linked hereditary deafness, optimal angles and rotation maneuvers for cochlear implant insertion reduced operating time by 93 min compared to the previous contralateral side surgery. Two cochlear implant cases planned for subtotal petrosectomy approach due to aberrant anatomy were successfully approached through routine mastoidectomy. The cholesteatoma cases were successfully exteriorized without necessitating partial labyrinthectomy or labyrinthine injury. There were no complications. CONCLUSION: 3D printed models for simulation training, surgical planning and use intraoperatively in temporal bone surgery demonstrated significant benefits in designing approaches, development of patient-specific techniques, avoidance of potential or actual complications encountered in previous or current surgery, and reduced surgical time and costs.

Creating a neuroanatomy education model with augmented reality and virtual reality simulations of white matter tracts.

OBJECTIVE: The utilization of digital technologies has experienced a notable surge, particularly in cases where access to cadavers is constrained, within the context of practical neuroanatomy training. This study evaluates augmented reality (AR)- and virtual reality (VR)-based educational models for neuroanatomy education. METHODS: Three-dimensional models were created using advanced photogrammetry. VR- and AR-based educational models were developed by arranging these 3D models to align with the learning objectives of neurosurgery residents and second-year medical students whose cadaveric training was disrupted due to an earthquake in Turkey. Participants engaged with and evaluated the VR- and AR-based educational models, followed by the completion of a 20-item graded user experience survey. A 10-question mini-test was given to assess the baseline knowledge level prior to training and to measure the achievement of learning objectives after training. RESULTS: Forty neurosurgery residents were trained with a VR-based educational model using VR headsets. An AR-based educational model was provided online to 200 second-year medical students for their practical neuroanatomy lesson. The average correct answer rates before the training were 7.5/10 for residents and 4.8/10 for students. These rates were significantly improved after the training to 9.7/10 for residents and to 8.7/10 for students (p < 0.001). Feedback from the users concurred that VR- and AR-based training could significantly enhance the learning experience in the field of neuroanatomy. CONCLUSIONS: VR/AR-based educational models have the potential to improve education. VR/AR-based training systems can serve as an auxiliary tool in neuroanatomy training, offering a realistic alternative to traditional learning tools.

Comparative study of nasal cavity drug delivery efficiency with different nozzles in a 3D printed model.

Background: Nasal sprays are widely used in treating nasal and sinus diseases; however, there are very few studies on the drug delivery efficiency of nasal sprays. In this study, the drug delivery efficiency of three different nasal spray devices was evaluated in vitro using a 3D printed cast model of nasal cavity. Methods: Three nasal spray devices with different nozzles and angles of administration were used in the 3D model of the nasal cavity and paranasal sinuses. The spraying area (SA), maximal spraying distance (MSD), and spraying distribution scores on the nasal septum and lateral nasal wall were recorded. Results: Different nasal spray devices have their own characteristics, including volume of each spray, SA, and plume angle. The SA of the three nozzles on the nasal septum increased with an increasing angle of administration. When the angle of administration was 50°, each nozzle reached the maximal SA. There was no statistically significant difference in MSD among the three nozzles at the three angles. The total scores for each nozzle using the three different spraying angles were as follows: nozzle A, 40° > 30° > 50°; nozzle B, 30° > 40° > 50°; and nozzle C, 30° > 40° > 50°. The total scores for different nozzles using the same angle were statistically significantly different and the scores for nozzle C were the highest. Nozzle C had the minimum plume angle. None of the three nozzles could effectively delivered drugs into the middle meatus at any angle in this model. Conclusions: The design of the nozzle affects drug delivery efficiency of nasal spray devices. The ideal angle of administration is 50°. The nozzle with smaller plume angle has higher drug delivery efficiency. Current nasal spray devices can easily deliver drugs to most areas of the nasal cavity, such as the turbinate, nasal septum, olfactory fissure, and nasopharynx, but not the middle meatus. These findings are meaningful for nozzle selection and device improvements.

MR-based Bony 3D models enable radiation-free preoperative patient-specific analysis and 3D printing for SCFE patients.

Objectives: Slipped capital femoral epiphyses (SCFE) is a common pediatric hip disease with the risk of osteoarthritis and impingement deformities, and 3D models could be useful for patient-specific analysis. Therefore, magnetic resonance imaging (MRI) bone segmentation and feasibility of 3D printing and of 3D ROM simulation using MRI-based 3D models were investigated. Methods: A retrospective study involving 22 symptomatic patients (22 hips) with SCFE was performed. All patients underwent preoperative hip MR with pelvic coronal high-resolution images (T1 images). Slice thickness was 0.8-1.2 mm. Mean age was 12 ± 2 years (59% male patients). All patients underwent surgical treatment. Semi-automatic MRI-based bone segmentation with manual corrections and 3D printing of plastic 3D models was performed. Virtual 3D models were tested for computer-assisted 3D ROM simulation of patients with knee images and were compared to asymptomatic contralateral hips with unilateral SCFE (15 hips, control group). Results: MRI-based bone segmentation was feasible (all patients, 100%, in 4.5 h, mean 272 ± 52 min). Three-dimensional printing of plastic 3D models was feasible (all patients, 100%) and was considered helpful for deformity analysis by the treating surgeons for severe and moderate SCFE. Three-dimensional ROM simulation showed significantly (p < 0.001) decreased flexion (48 ± 40°) and IR in 90° of flexion (-14 ± 21°, IRF-90°) for severe SCFE patients with MRI compared to control group (122 ± 9° and 36 ± 11°). Slip angle improved significantly (p < 0.001) from preoperative 54 ± 15° to postoperative 4 ± 2°. Conclusion: MRI-based 3D models were feasible for SCFE patients. Three-dimensional models could be useful for severe SCFE patients for preoperative 3D printing and deformity analysis and for ROM simulation. This could aid for patient-specific diagnosis, treatment decisions, and preoperative planning. MRI-based 3D models are radiation-free and could be used instead of CT-based 3D models in the future.

Human patient derived organoids: an emerging precision medicine model for gastrointestinal cancer research.

Gastrointestinal cancers account for approximately one-third of the total global cancer incidence and mortality with a poor prognosis. It is one of the leading causes of cancer-related deaths worldwide. Most of these diseases lack effective treatment, occurring as a result of inappropriate models to develop safe and potent therapies. As a novel preclinical model, tumor patient-derived organoids (PDOs), can be established from patients' tumor tissue and cultured in the laboratory in 3D architectures. This 3D model can not only highly simulate and preserve key biological characteristics of the source tumor tissue in vitro but also reproduce the in vivo tumor microenvironment through co-culture. Our review provided an overview of the different in vitro models in current tumor research, the derivation of cells in PDO models, and the application of PDO model technology in gastrointestinal cancers, particularly the applications in combination with CRISPR/Cas9 gene editing technology, tumor microenvironment simulation, drug screening, drug development, and personalized medicine. It also elucidates the ethical status quo of organoid research and the current challenges encountered in clinical research, and offers a forward-looking assessment of the potential paths for clinical organoid research advancement.