The Effect of Nanoparticles Against Streptococcus mutans in the Orthodontic Primer Used for Aligner Attachment: An In Vitro Study.

Objective This study investigates the antimicrobial properties of silver (1%) and chitosan (1%) nanoparticles against Streptococcus mutans (S. mutans) when added to an orthodontic primer used for aligner attachments. While aligner treatments are becoming increasingly popular for their aesthetics and convenience, their attachments can create retention sites for bacteria, potentially leading to white spot lesions (WSLs). This in vitro study aims to address this issue by enhancing the antimicrobial efficacy of aligner primers. Methodology Thirty freshly extracted teeth were classified into the following three groups: Group A with the standard primer, Group B with chitosan nanoparticles mixed in the primer, and Group C with silver nanoparticles mixed in the primer. The samples were incubated with S. mutans and bacterial colonies were counted at 12, 24, 48, and 72 hours. Results The results showed a significant reduction in colony-forming units (CFUs) in the groups with nanoparticles compared to the control group, with silver nanoparticles exhibiting a higher antimicrobial effect than chitosan. Conclusions This study suggests that incorporating silver nanoparticles into orthodontic primers can effectively reduce bacterial growth, potentially improving oral hygiene and reducing the risk of WSLs in patients undergoing aligner treatment.

Dimensional changes of the gingival tissues induced by clear aligners and fixed orthodontic appliances: A retrospective study.

OBJECTIVE: The aim of this study was to evaluate gingival tissue adaption induced by orthodontic tooth movement, in terms of clinical crown height (i.e., attachment loss), and thickness of the keratinized gingiva at the margin level. METHODS: Pre- and post-treatment intraoral models/scans of 100 orthodontically treated patients (50 treated with clear aligners and 50 treated with fixed appliance) were acquired. Models were digitally scanned. Each couple of pre- and post-treatment scans were superimposed using the Compare© software (Medit spa, Seoul, Republic of Korea) taking the same reference landmarks in all cases, that were the palatal rugae for the upper arch, and the labial median frenulum for the lower arch. Only teeth that had undergone vestibulo-palatal (or vice versa) movement, greater than 1 mm were included in the analyses. The change from pre-treatment to post-treatment, in the clinical crown height and thickness of the keratinized gingiva at the margin level were digitally measured and compared between the two groups. Statistical analysis included paired t-tests, and unpaired t-tests with significance set at p<0.05. RESULTS: There was a statistically significant change in clinical crown height and gingival thickness in both groups. However, a clinically relevant attachment loss was found only within the fixed appliance group. Whereas, regarding the change in gingival thickness, there was no clinically relevant changes between the two groups. CONCLUSIONS: Orthodontic tooth movement with fixed appliance is associated to a clinically relevant attachment loss. Clear aligners seem to be associated with a more discrete attachment loss than the one observed with fixed appliances. CLINICAL RELEVANCE: Orthodontists should pay attention and monitoring the clinical crown height (i.e., attachment loss) during orthodontic movement, mostly when using fixed appliances.

Impact of orthodontic treatment with aligners on the oral health-related quality of life of patients with trisomy 21.

OBJECTIVE: To assess the impact of treatment with orthodontic aligners (OA) on oral health-related quality of life (OHRQoL) in patients with trisomy 21 (T21) compared to non-syndromic patients. MATERIALS AND METHODS: The sample consisted of 30 patients, both sexes, aged between 11 and 35 years, divided into two groups: T21 (n = 10, patients with T21, treated prospectively) and CONTROL (n = 20, control group, non-syndromic patients, from the Orthodontic Laboratory of UNOPAR). In both groups, patients were treated with Invisalign orthodontic aligners (Align Technology), following the same treatment parameters. Participants, assisted by their caregivers, when necessary, answered Oral Health Impact Profile (OHIP-14) instrument and the patient's guardians answered the Oral Health Scale for People with Down's syndrome (OHDS) instrument, before (T0) and after 30 (T1), 180 (T2), and 365 (T3) days from the start of treatment. Friedman tests with Bonferroni correction and Mann-Whitney tests were used (p < .05). RESULTS: For the OHDS instrument, it was observed that for the eating and communication domains and an overall score, the treatment with OA positively impacted the lives of T21 patients (p < .05). Regarding the OHIP-14 instrument, the intragroup evaluation showed that in the CONTROL group, there was no significant difference between the evaluated times; while for the T21 group, there was a significant positive impact (p < .05). CONCLUSION: The results showed that the treatment with aligners positively impacted the OHRQoL of T21 patients, and these results were perceived by caregivers, mainly in relation to issues related to eating and communication.

Comparison of dental movements in digital setups created by orthodontists and "3shape design service®" engineers: A cross-sectional study.

INTRODUCTION: The demand for faster and invisible orthodontic treatments has led to the increased use of clear aligners, facilitated by advancements in digital treatment planning. This study aims to evaluate the reliability of digital orthodontic setups performed by orthodontists compared to those by 3Shape Design Service®engineers. MATERIAL AND METHODS: A monocentric, cross-sectional observational study was conducted at Bretonneau Hospital from October 2022 to May 2023. All patients meeting the inclusion criteria and willing to participate were included in the study. Intraoral scans were used to create treatment setups using the Ortho System® software, performed by both orthodontists and 3Shape® engineers. The primary objective was to compare the dental movements (rotation, intrusion, extrusion, buccolingual inclination, tipping, mesiodistal translation and buccolingual translation) between the two groups. Secondary objectives included the number of teeth displaced, aligners needed, interproximal enamel reduction and number of attachments placed. RESULTS: Nineteen patients with mild to moderate malocclusion were included. Statistically significant differences were found in tooth displacements between the two groups with engineers executing greater dental movements for derotation (4.9±2.6 vs. 3.7±2.3), tipping (0.79±0.69 vs. 0.26±0.44), bucco-lingual (0.40±0.26 vs. 0.08±0.11) and mesio-distal translations (0.31±0.20 vs. 0.20±0.17). Secondary measures showed no significant differences except for the number of teeth displaced (15.32±5.21 vs. 9.68±4.82), which was higher in the 3Shape group. DISCUSSION: While digital setups by engineers showed more significant tooth movements, the practical impact on mild malocclusion treatment was minimal. This study highlights the need for precise treatment objectives and consideration of overcorrection practices. CONCLUSION: For mild malocclusions, outsourcing setups to 3Shape engineers can be an alternative to in-office setups by orthodontists. However, further studies are needed to evaluate setup reliability for more complex malocclusions.

Biofilm formation of Streptococcus mutans, Streptococcus sanguinis, Staphylococcus epidermidis, Staphylococcus aureus, Lactobacillus casei, and Candida Albicans on 5 thermoform and 3D printed orthodontic clear aligner and retainer materials at 3 time points: an in vitro study.

INTRODUCTION: Orthodontic clear aligners and retainers have numerous advantages that is making them ever increasingly popular. However, they might, similar to any other oral appliance, contribute to biofilm formation and finally dental caries or white spot lesions or gingival inflammations. The literature on biofilm formation on orthodontic clear appliances is very scarce and limited to a few microorganisms and materials. Therefore, this experimental study evaluated the biofilm formation on 5 thermoformed and 3D printed CAD/CAM orthodontic retainers in 3 intervals. METHODS: In this in vitro study, 345 specimens (270 test discs and 45 negative controls) were created from fabricated retainers. Retainers included a 3D printed CAD/CAM material (Detax) and four thermoformed retainers [Erkodent (polyethylene terephthalate glycol [PETG]); EasyVac (polyethylene); DB (polyester based on terephthalic acid); and Clear Tech]. They were all 1 mm thick, and all completely fabricated, i.e., heated or printed. The discs were placed in 96-well plates. Microorganisms were cultured on 270 discs for 24 h (90 discs), 72 h (90 other discs), and 5 days or 120 h (90 other discs). Biofilm formation of the strains and negative controls was measured using the microtiter plate assay by ELISA reading. The microbes' ability to produce biofilm was categorized based on the comparison of average optical density (OD) of tests versus a cut-off point OD (ODc) calculated as the average of the OD of corresponding negative controls plus 3× its standard deviation: non-biofilm former [OD ≤ ODc], weak biofilm former [ODc < OD ≤ (2 × ODc)], moderate biofilm former [(2 × ODc) < OD ≤ (4 × ODc)], and strong biofilm former [(4 × ODc) < OD]. These were also converted to ranked scores between zero (no biofilm) and 3. The difference between ODs with control ODs were calculated. These were analyzed using 3-way ANOVA, 2-way ANOVA, and Tukey tests (α = 0.05, α = 0.008). RESULTS: The 3-way ANOVA showed that the overall difference among the ΔODs of 5 retainers (all microorganisms and all intervals combined, n = 270) was not significant (F = 1.860, P = 0.119). Nevertheless, the difference among 3 intervals (F = 31.607, P = 0.0000) and the difference among the 6 microorganisms (F = 24.044, P = 0.0000) were significant. According to the Tukey test, the differences between the 1st interval with either of the other two intervals was significant (both P values = 0.000). There were significant differences between Candida albicans with all other organisms (all 5 P values = 0.0000). All other pairwise comparisons were insignificant (all 10 P values ≥ 0.1). After taking the averages of the 3 intervals, the order of the biofilm generation for different materials were as follows: Detax (average score: 1.56), Easyvac (1.67), Erkodent (1.78), Clear Tech (1.83), BD (2.28). CONCLUSIONS: As far as these 6 microorganisms are of concern, there might not be a significant overall difference among the clear retainer materials tested in this study. A significant overall increase was observed between the first and third days, which later did not significantly increase more until day 5. The Candida albicans biofilm was more intense than the tested 5 bacteria, which themselves showed rather similar growth patterns to each other.

Panoramic evaluation of external root resorption in mandibular molars during orthodontic treatment: a comparison between root-filled and vital teeth treated with fixed appliances or clear aligners.

BACKGROUND: This investigation compared the extent of external apical root resorption (EARR) in root-filled teeth (RFT) and their contralateral vital pulp teeth (VPT) counterparts during orthodontic treatment (OT) with clear aligner (CA) treatment or fixed appliance (FA) treatment. METHODS: Sixty-six patients with similar baseline American Board of Orthodontics (ABO) discrepancy index scores were divided into two groups: 37 patients (21 females, 16 males; mean age 17.45 ± 2.67 years) in the FA group, and 29 patients (18 females, 11 males; mean age 18.33 ± 1.96 years) in the CA group. Digital panoramic radiographs captured pre- and post-OT were used to measure tooth lengths and root surface measurements in mandibular molars. EARR in both RFT and contralateral VPT was evaluated pre- and post-OT. Statistical analysis employed paired t-tests, independent t-tests, and analysis of covariance (ANCOVA) (p < .05). RESULTS: All teeth exhibited varying degrees of EARR following OT. FA treatment resulted in significantly longer treatment duration (p < .05) and greater EARR compared to CA treatment (p < .05). Moreover, statistically significant differences in EARR were observed within both groups between RFT and VPT (p < .05). CONCLUSIONS: Comparison of pre- and post-OT radiographs revealed different degrees of EARR in all teeth. CA treatment resulted in less frequent and less severe EARR compared to FA treatment. RFT demonstrated greater resistance to EARR than VPT in both treatment groups.

A Questionnaire-based Survey of Postgraduate Students on Awareness about Direct Printed Aligners.

Aims and Objectives: The purpose of this survey was to assess postgraduate students' knowledge of orthodontic direct printed aligners and their opinions of the treatment modalities that can be used with them. Materials and Methods: 198 postgraduate learners were given a questionnaire consisting of 25 questions via Google Forms as part of this web-based survey. Results: Compared to their male counterparts, women were more knowledgeable about direct printed aligners. Conclusion: The survey concluded that most postgraduate students have knowledge about direct printed aligners. Females are more aware about direct printed aligners than males. Orthodontists were the predominant source of knowledge regarding direct printed aligners.

Analysis of the Effects of Different Orthodontic Appliances on Salivary pH Levels: An In vitro Approach.

Background: Orthodontic appliances can influence the oral environment, including salivary pH levels, which play a crucial role in maintaining oral health. Understanding how different orthodontic appliances affect salivary pH levels can help in improving treatment outcomes and minimizing potential side effects. Materials and Methods: In this in vitro study, we evaluated the effects of various orthodontic appliances on salivary pH levels using a simulated oral environment. Four different types of orthodontic appliances were tested: traditional metal braces, ceramic braces, lingual braces, and clear aligners. Saliva samples were collected and subjected to pH measurements using a standardized method. The pH measurements were recorded at three different time intervals: immediately after appliance placement, after 24 hours, and after 48 hours. Results: The initial pH values varied among the different orthodontic appliances: metal braces (pH 7.2), ceramic braces (pH 7.4), lingual braces (pH 7.1), and clear aligners (pH 7.5). After 24 hours, there was a decrease in pH levels for all groups: metal braces (pH 6.8), ceramic braces (pH 7.0), lingual braces (pH 6.7), and clear aligners (pH 7.2). After 48 hours, the pH levels continued to decrease: metal braces (pH 6.5), ceramic braces (pH 6.8), lingual braces (pH 6.4), and clear aligners (pH 6.9). Conclusion: Our findings suggest that different orthodontic appliances have varying effects on salivary pH levels. Metal braces and lingual braces tend to cause a more pronounced decrease in salivary pH compared to ceramic braces and clear aligners. Monitoring salivary pH levels during orthodontic treatment may be beneficial in identifying potential risks to oral health and implementing appropriate interventions.

Damage source localisation in complex geometries using acoustic emission and acousto-ultrasonic techniques: an experimental study on clear aligners.

Passive non-destructive evaluation tools such as acoustic emission (AE) testing and acousto-ultrasonics (AU) approach present a complex problem in damage localisation in complex and nonhomogeneous geometries. A novel AU-guided AE frequency interpretation approach is proposed in this research work which aims at overcoming this limitation. For the experimental evaluation, the damage sources from a geometrically complex clear dental aligners are tested under cyclic compression load and their origins are evaluated. Despite the rapid worldwide diffusion of the clear aligners, their mechanical behaviour is poorly investigated. In this work, the frequency characteristics of the artificially simulated stress wave, generated from different dental positions of the clear aligners, are studied using the AU approach. These frequency characteristics are then used to analyse the AE signals generated by these aligners when subjected to cyclic compressive loading. In addition, the time domain characteristics of the AE signals are studied using their Time of Arrival (ToA). The Akaike Information Criterion (AIC) is used to estimate the ToA. These frequency and time domain characteristics of the AE signals are used to estimate the local damage origin in the clear dental aligners. This will help in identifying localised damage sources during the usage period of the aligners. Experimental results revealed significant damages in the left maxillary premolar and right maxillary third molar of the aligners.

Comparison between twin block appliance and mandibular advancement on clear aligners in the improvement of airway dimension: incremental versus maximum bite advancement.

Objective: The aim of the present retrospective study was to compare the changes resulting from treatment using the MA and the TB with special regard to the oro-and naso-pharyngeal sagittal airway dimensions in subjects with dentoskeletal Class II malocclusions and positive history of Sleep Disorder Breathing (SDB) diagnosed through the Pediatric Sleep Questionnaire (PSQ). Materials and methods: This retrospective study involved 2 groups of subjects: patients treated with Twin Block (TB group: n = 22, 10 males, 12 females; mean age 12.0 ± 1.3 years) and patients treated with Mandibular Advancement (MA group: n = 23, 11 males, 12 females; mean age 12.2 ± 1.1 years). Pretreatment (T1) and posttreatment (T2) lateral cephalograms were analyzed. All patients underwent the PSQ to diagnose SDB. Results: In both treated groups there was an increase in the airways dimensions and an improvement in symptoms related SDB. The statistical comparison of the changes between T1 and T2 in the TB group showed a significant increment in upper airway size (PNS-AD2, +1.50 mm + -3.30; McNamara's upper pharynx dimension, +2.21 + -4.21) after active treatment. The MA group showed similar results during active treatment with a significant increase in both upper (PNS-AD2, +2.72 + -2.65; McNamara's upper pharynx dimension, +2.97 + -3.07) and lower (PNS-AD1, +2.17 mm + -3.54) airway size. Conclusions: Despite the different structure of these two devices and the different advancement protocols, both appliances were valuable as a suitable treatment option for Class II patients with respiratory disorders, inducing an increase of upper and lower airway size and a significant reduction in diurnal symptoms.

Miniscrew anchorage versus Class II elastics for maxillary arch distalization using clear aligners.

OBJECTIVES: To identify whether intramaxillary miniscrew anchorage could achieve a better maxillary arch distalization effect in clear aligner treatment compared to Class II elastics. MATERIALS AND METHODS: Thirty adult patients with Class II dentition who were treated with whole maxillary arch distalization using clear aligners were collected. Either intramaxillary miniscrew anchorage (miniscrew group, n = 17) or intermaxillary Class II elastics (Class II elastic group, n = 13) were used to support maxillary arch distalization. Three-dimensional predicted and achieved displacements, and angular changes of maxillary posterior teeth and anterior teeth, were measured and compared. RESULTS: The achieved distalization efficiency was 36.2%-43.9% in the posterior teeth and the retraction efficiency was 36.9%-49.4% in the anterior teeth. No statistically significant differences were found in maxillary arch distalization efficiency between the groups. The miniscrew group achieved less incisor extrusion and posterior tooth distal tipping than the Class II elastic group. Both groups achieved comparable arch expansion, posterior tooth buccal inclination, and anterior tooth lingual inclination. CONCLUSIONS: Intramaxillary miniscrew anchorage and intermaxillary Class II elastics achieved comparable efficiency in maxillary arch distalization. However, the miniscrew anchorage showed better vertical control in anterior teeth and mesiodistal tipping control in posterior teeth.

Evaluation of maxillary dimensional changes in the mixed dentition: clear aligners vs acrylic expanders.

OBJECTIVES: To compare changes in upper arch dimension and molar inclination between Invisalign First (IF) and removable acrylic expander (RE) treatments during the mixed dentition period. MATERIALS AND METHODS: Seventeen patients meeting inclusion criteria underwent IF treatment and were age matched with a group that received treatment with a removable acrylic expander (RE). Intercanine width (ICW), intermolar width, arch depth, buccolingual inclination of the first molars (MI), surface area (SA) and volume (VAP) of the anterior palate, and expansion were compared before and after treatment. The predictability of expansion was calculated for the IF group. Analysis of variance and Kruskal-Wallis tests were used to assess differences. RESULTS: The ICW increased significantly by 2.14 mm in the IF group and 3.49 mm in the RE group, with no significant intergroup difference. Both groups exhibited significant increases in intermolar width (P < .05), except for intermolar distopalatal width in the IF group (P = .246). Mesiobuccal rotation of the first molar was observed with IF treatment. Although SA and VAP increased in both groups, the changes were not significant for the IF group (P > .05). The RE group exhibited significantly higher increases (P < .05), with an SA increase of 34.32 mm2 and VAP increase of 119.15 mm3. MI changes were in the opposite directions. The prediction accuracy of expansion was 70.28% for canines and 34.12% for first molars. CONCLUSIONS: Both appliances effectively expanded the intercanine region in growing patients. Expansion predictability was lower in first molars than in canines for the IF group. Removable acrylic expanders could be a choice of preference for expansion targeted to the molar region.

Clear aligner treatment of an adult open bite with bilateral missing mandibular first molars through molar protraction with Albert cantilever arms.

Premature loss of first permanent molars is a common occurrence in clinical practice, leading to abnormal occlusion and inefficient mastication for patients. This case report presented the orthodontic retreatment of a 32-year-old female patient who suffered from premature loss of mandibular bilateral first molars. The mesial tipping of the mandibular second molars led to an occlusal interference, resulting in a clockwise rotation of the lower jaw and an anterior open bite (AOB). We achieved long-distance molar mesialization using clear aligners with Albert cantilever arms. After 42 months of treatment, the patient's occlusion and facial profile significantly improved. The cantilever combined with the cleat aligner treatment has been clinically effective for the protraction of mandibular posterior teeth, extending the field of application of clear aligners.

Diagnostic performance of ClinCheck, Dolphin Imaging, and 3D Slicer software for Bolton discrepancy analysis.

OBJECTIVES: To evaluate the diagnostic performance of ClinCheck, Dolphin Imaging orthodontic software, and 3D Slicer for the analysis of Bolton discrepancy (BD). MATERIALS AND METHODS: Fifty-five pairs of early-stage digital models of patients treated with Invisalign were printed to measure the BD by manual method with a digital caliper (gold standard). The discrepancy values calculated by ClinCheck were obtained. In addition, the sample STL files were measured using Dolphin Imaging and 3D Slicer software to obtain BD values. To assess reliability, precision, and accuracy of the methods, intraclass correlation coefficients (ICCs), Dahlberg's formula, paired t-tests, and the Bland-Altman method were used, respectively. Repeated-measures analysis of variance with Bonferroni post hoc test was used to assess the difference between groups. RESULTS: The three methods showed reliable measurements (ICC ≥ 0.7), with the values of anterior Bolton slightly higher than overall Bolton. Measurements for the anterior Bolton showed higher precision (Dahlberg's formula 0.65, 0.70, and 0.55) than those for the overall Bolton. For anterior Bolton, only the measurements obtained by ClinCheck and Dolphin Imaging were accurate (P > .05, no proportion bias), while for overall Bolton, all groups had a significant difference. The Bland-Altman plots demonstrated no consistency for anterior Bolton measurements when 3D Slicer was used and for the overall Bolton. CONCLUSIONS: ClinCheck and Dolphin Imaging showed accuracy to quantify anterior BD. For the overall Bolton measurements, ClinCheck showed a statistical difference from the manual assessment but without relevant clinical significance.

Análise de forças de movimentação e características físico-químicas em alinhadores ortodônticos: avanços tecnológicos e considerações críticas / Analysis of motion forces and physicochemical characteristics in orthodontic aligners: technological advances and critical considerations

O avanço tecnológico revolucionou a prática odontológica, com os alinhadores ortodônticos emergindo como uma escolha altamente popular entre pacientes que buscam tratamentos estéticos e confortáveis. No entanto, apesar de sua crescente demanda, permanecem questões cruciais relacionadas à eficácia e análise dimensional desses dispositivos. Este artigo oferece uma análise abrangente das características químicas, físicas e mecânicas dos alinhadores ortodônticos, iluminando a influência vital do processo de termoformação e da espessura nas propriedades desses materiais. Compreender profundamente essas características é essencial para aprimorar a eficácia e a durabilidade dos alinhadores ortodônticos, contribuindo, assim, para o sucesso e a evolução dos tratamentos ortodônticos modernos. Neste estudo, exploraremos: 1) as propriedades químicas dos materiais e como elas afetam a biocompatibilidade e a resistência à degradação; 2) as características físicas, incluindo textura de superfície, transparência e sua influência na adaptação bucal e no conforto do paciente; 3) as propriedades mecânicas, como flexibilidade e rigidez, e como essas características afetam a distribuição de forças de movimentação dentária; 4) a influência do processo de termoformação na precisão e reprodutibilidade dos alinhadores, bem como sua relação com a qualidade do tratamento; 5) a análise crítica da espessura dos alinhadores e seu papel na capacidade de aplicar forças adequadas para a movimentação dentária. Ao abordar esses aspectos, este artigo visa oferecer uma visão holística das complexidades envolvidas na fabricação e uso de alinhadores ortodônticos. Esperamos que esta revisão contribua para uma compreensão mais profunda desses dispositivos e promova avanços significativos na ortodontia, beneficiando tanto os profissionais quanto os pacientes.

Technological advancement has revolutionized dental practice, with orthodontic aligners emerging as a trendy choice among patients seeking aesthetic and comfortable treatments. However, despite their growing demand, crucial questions remain regarding these devices' effectiveness and dimensional analysis. This article offers a comprehensive analysis of the chemical, physical, and mechanical characteristics of orthodontic aligners, illuminating the vital influence of the thermoforming process and thickness on the properties of these materials. Understanding these characteristics in depth is essential to improving the effectiveness and durability of orthodontic aligners, thus contributing to the success and evolution of modern orthodontic treatments. In this study, we will explore 1) the chemical properties of materials and how these properties affect biocompatibility and resistance to degradation; 2) the physical characteristics, including surface texture, transparency and their influence on oral adaptation and patient comfort; 3) mechanical properties, such as flexibility and stiffness, and how these characteristics affect the distribution of tooth movement forces; 4) the influence of the thermoforming process on the precision and reproducibility of the aligners, as well as its relationship with the quality of the treatment; 5) critical analysis of aligner thickness and its role in the ability to apply adequate forces for tooth movement. By addressing these aspects, this article aims to offer a holistic view of the complexities involved in manufacturing and using orthodontic aligners. We hope this review will contribute to a deeper understanding of these devices and promote significant advances in orthodontics, benefiting professionals and patients.

Benchmarking of five NGS mapping tools for the reference alignment of bacterial outer membrane vesicles-associated small RNAs.

Advances in small RNAs (sRNAs)-related studies have posed a challenge for NGS-related bioinformatics, especially regarding the correct mapping of sRNAs. Depending on the algorithms and scoring matrices on which they are based, aligners are influenced by the characteristics of the dataset and the reference genome. These influences have been studied mainly in eukaryotes and to some extent in prokaryotes. However, in bacteria, the selection of aligners depending on sRNA-seq data associated with outer membrane vesicles (OMVs) and the features of the corresponding bacterial reference genome has not yet been investigated. We selected five aligners: BBmap, Bowtie2, BWA, Minimap2 and Segemehl, known for their generally good performance, to test them in mapping OMV-associated sRNAs from Aliivibrio fischeri to the bacterial reference genome. Significant differences in the performance of the five aligners were observed, resulting in differential recognition of OMV-associated sRNA biotypes in A. fischeri. Our results suggest that aligner(s) should not be arbitrarily selected for this task, which is often done, as this can be detrimental to the biological interpretation of NGS analysis results. Since each aligner has specific advantages and disadvantages, these need to be considered depending on the characteristics of the input OMV sRNAs dataset and the corresponding bacterial reference genome to improve the detection of existing, biologically important OMV sRNAs. Until we learn more about these dependencies, we recommend using at least two, preferably three, aligners that have good metrics for the given dataset/bacterial reference genome. The overlapping results should be considered trustworthy, yet their differences should not be dismissed lightly, but treated carefully in order not to overlook any biologically important OMV sRNA. This can be achieved by applying the intersect-then-combine approach. For the mapping of OMV-associated sRNAs of A. fischeri to the reference genome organized into two circular chromosomes and one circular plasmid, containing copies of sequences with rRNA- and tRNA-related features and no copies of sequences with protein-encoding features, if the aligners are used with their default parameters, we advise avoiding Segemehl, and recommend using the intersect-then-combine approach with BBmap, BWA and Minimap2 to improve the potential for discovery of biologically important OMV-associated sRNAs.

Evaluation of the effect of different attachment configurations on molar teeth in maxillary expansion with clear aligners - a finite element analysis.

OBJECTIVE: To evaluate the effects of different attachment configurations with and without buccal root torque on expansion movements achieved with aligners through finite element analysis (FEA). METHODS: FEA modelling was done with 0.25 mm buccal expansion force application to the maxillary molars with different attachment configurations: Eight models were tested (1) no attachment (NA), (2) horizontal attachment (HA), (3) gingivally beveled horizontal attachment (GHA), and (4) occlusally beveled horizontal attachment (OHA), as well as models with 6obuccal root torque, (5) no attachment (TNA), (6) horizontal attachment (THA), (7) gingivally beveled horizontal attachment (TGHA), and (8) occlusally beveled horizontal attachment (TOHA). RESULTS: The first and second molars exhibited buccal tipping in all models. The highest amount of buccal tipping for the molars was observed in the NA (6CMB, 0.232 mm; 6CMP, 0.246 mm; 7CMB, 0.281 mm; 7CMP, 0.312 mm) and GHA (6CMB, 0.230; 6CMP, 0.245; 7CMB, 0.279 mm; 7CMP, 0.311 mm) models, respectively, while the least tipping was observed in the TOHA model (6CMB, 0.155 mm; 6CMP, 0.168 mm; 7CMB, 0.216 mm; 7CMP, 0.240 mm). In all groups, the buccal tipping of the second molars was higher than that of the first molars. CONCLUSION: This FEA study showed that expansion with aligners tip maxillary molars buccally and the use of occlusally beveled attachments and addition of buccal root torque reduces uncontrolled buccal tipping.

Aligners: review of their chemical components, recycling, mechanical properties and therapeutic needs - Part 1 / Aligneurs : mise en perspective de la composition chimique, du recyclage, des propriétés mécaniques et des besoins thérapeutiques ­ Partie 1.

Introduction: The aligner is a thermoformed plastic device composed of various chemical components: polyurethane, polyethylene terephthalate glycol, polypropylene… All these plastics must be sufficiently resistant to abrasion and translucent for aesthetic purposes, but their solubility to salivary enzymes, insertion-disinsertion fatigue and recyclability vary according to material. From an orthodontic point of view, they must facilitate tooth movement. However, their behavior differs from that of orthodontic archwires: their Young's modulus, resilience and unloading curve are distinct, resulting in mechanical properties that fall significantly below the orthodontic requirements of multi-bracket systems. Objective: The aim of this article was to review the chemical composition, recycling and mechanical properties of aligners, and to put them into perspective with therapeutic indications. Materials and Methods: Literature data were approximated to orthodontic needs. Results: Neither plastic nor direct printing can match the mechanical properties of our archwires or the procedures of a reliable vestibular multi-attachment appliance. Discussion: Aligners remain an interesting tool in targeted indications.

Introduction: L'aligneur est un dispositif en plastique thermoformé dont la composition chimique est diverse : polyuréthane, polyéthylène téréphtalate glycol, polypropylène… Tous ces plastiques doivent être suffisamment résistants à l'abrasion et translucides pour être esthétiques mais ils présentent une solubilité aux enzymes salivaires, une fatigue liée à l'insertion-désinsertion et une recyclabilité qui sont variables selon le matériau. D'un point de vue orthodontique, ils doivent permettre de déplacer les dents. Mais leur comportement ne ressemble pas à celui des arcs orthodontiques : leur module de Young, leur résilience et leur courbe de décharge en sont éloignés et confèrent des propriétés mécaniques très inférieures aux exigences orthodontiques des appareils multi-attaches. Objectif: L'objectif de l'article était de faire le point sur la composition chimique, le recyclage, les propriétés mécaniques des aligneurs et de les mettre en perspective avec les indications thérapeutiques. Matériel et méthode: Les données de la littérature sont approchées des besoins orthodontiques. Résultats: Ni le plastique, ni l'impression directe ne sont en capacité de rivaliser avec les propriétés mécaniques de nos arcs ou avec les procédures d'un appareil multi-attache vestibulaire fiables. Discussion: Les aligneurs restent un outil intéressant dans des indications ciblées.

Evaluation and comparative assessment of clear aligners and conventional appliances on oral health-related quality of life in pediatric populations: a cross-sectional study.

This study was designed to evaluate and compare the usefulness of clear aligners and conventional appliances on Oral Health-Related Quality of Life (OHRQoL) in pediatric population. Emphasis was placed on the relative benefits and implications of employing clear aligners owing to their escalating prevalence and acceptability. The study participants were divided into four groups: Clear Aligner Group (CAG), Conventional Appliance Group (ConAG), Malocclusion Control Group (MCG), and Normal Control Group (NCG). Parameters including sociodemographic indicators and daily routines were assessed. OHRQoL was evaluated via the Child Perceptions Questionnaire (CPQ). Psychological conditions were assessed through the Depression, Anxiety and Stress Scale (DASS). Statistical differences were found between the four groups regarding CPQ subscales and total scores (p < 0.05). CAG was better than ConAG (p < 0.05) regarding the scores of functional limitations, emotional and social well-being, and total score, however no significant difference was discovered in the oral symptoms scores (p = 0.62). Moreover, all the treatment groups had worse OHRQoL compared to NCG (p < 0.05). Malocclusions and their treatments did not increase the psychological distress as per the DASS results. A novel correlation between the excessive tooth brushing and reduced OHRQoL was also observed (p < 0.05). The study herein emphasized the benefits of clear aligners in children and adolescents with OHRQoL. It was highlighted that the clear aligners had potential and were preferred for the adolescent orthodontic treatment.

Microbial Changes in the Periodontal Environment Due to Orthodontic Appliances: A Review.

Orthodontic appliances significantly influence the microbiological dynamics within the oral cavity, transforming symbiotic relationships into dysbiotic states that can lead to periodontal diseases. This review synthesizes current findings on how orthodontic treatments, particularly fixed and removable appliances, foster niches for bacterial accumulation and complicate oral hygiene maintenance. Advanced culture-independent methods were employed to identify shifts toward anaerobic and pathogenic bacteria, with fixed appliances showing a more pronounced impact compared to clear aligners. The study underscores the importance of meticulous oral hygiene practices and routine dental monitoring to manage these microbial shifts effectively. By highlighting the relationship between appliance type, surface characteristics, treatment duration, and microbial changes, this review aims to enhance dental professionals' understanding of periodontal risks associated with orthodontic appliances and strategies to mitigate these risks. The findings are intended to guide clinicians in optimizing orthodontic care to prevent plaque-associated diseases, ensuring better periodontal health outcomes for patients undergoing orthodontic treatment.