Custom fabricated three-dimensional printed surgical guide for trephine bur in autogenous bone graft: A technique report.

This technique presents a workflow that designs the custom surgical guide to cover a trephine bur using simple slicer software and three-dimensional (3D) printing to perform the semilunar technique. This method in autogenous bone grafting surgery harvests a thin layer of cortical bone in the donor site with a trephine bur. Its biologically favorable, round shape can be used as a shell to reconstruct the ridge with a 3D contour acceptable for future implant placement. A 78-year-old female patient required vertical and horizontal bone grafting for future implant placement due to the infection caused by the vertically fractured root of a premolar. The patient's cone beam computed tomography (CBCT) file was translated into a standard tessellation language (STL) file, and recipient and donor site models were created. Simulated surgery was done using the software first to detect any possible complications during surgery. The trephine bur planned for use in surgery was measured in necessary dimensions, and the values were added to create a guide for surgery in slicer software. Then, it was 3D-printed with a stereolithography (SLA) printer. After testing the fit of the guide, it was further tested on a fused filament fabrication (FFF) printed donor site model to check if the desired shape and size of the plate were acquired after harvest. Then, the plates were used for model surgery on the recipient site model. After no issues from the previous steps, the final patient surgery was approved and completed with success. This technique utilizes the SLA printing method to create the custom surgical guide for a trephine bur without using commercially available products. Moreover, it could be tested on FFF 3D-printed anatomical models to ensure its validity. With this innovative technique, clinicians can efficiently perform a semilunar technique, facilitating the surgery and improving patient care.

Survival Rate and Cervical Bone Loss of Dental Implants Placed in Regenerated Areas with Free Iliac Graft.

Statement of the Problem: For many years, practitioners have been encountered with dental rehabilitation of atrophic jaws. Among many of alternatives, free iliac graft can be a reasonable and also problematic choice to be accomplished. Purpose: The aim of this study was to evaluate the implant survival rate and bone loss in implants inserted in reconstructed jaws with free iliac graft. Materials and Method: In this clinical trial study, twelve patients that underwent bone reconstruction with free iliac graft were included in this retrospective study. The patients underwent surgery over a 6-year period from September 2011 to July 2017. Panoramic images were taken immediately after implant insertion and at the follow-up session. The parameters that were assessed included implant survival rate, bone level changes, and surrounding tissue conditions. Results: One hundred and nine implants were placed in eight female and four male patients, of which 65 (59.6%) were inserted in the reconstructed maxilla and 44 (40.3%) in the reconstructed mandible. The interval between the reconstruction surgery and follow-up session was 28.75 months and the mean interval between implant insertion and the follow-up session was 21.75 months, ranging from 6 to 72 months. The total average of crestal bone resorption was 2.44 mm (range: 0 to 5.43 mm). Conclusion: This study found that rehabilitation of atrophic jaws with dental implants placed in free iliac graft was associated with acceptable marginal bone loss, survival rate, satisfaction, and esthetic results among the patients.

Vertical Ridge Gain with Various Bone Augmentation Techniques: A Systematic Review and Meta-Analysis.

PURPOSE: The aim of this systematic review was to determine the most effective alveolar augmentation technique for vertical bone gain. MATERIALS AND METHODS: A systematic search to select clinical trials and retrospective studies done on patients with reduced vertical bone height was conducted. The intervention of interest was autogenous block graft done compared to procedures such as distraction osteogenesis (DO), particulate grafting, block plus particulate grafting with titanium mesh, and tent pole technique in systematically healthy adult patients age 18 and older. The following electronic databases were explored: PubMed, CINAHL, and Dental and Oral Science. A supplementary manual search of published full-text articles from January 2005 to December 2017 was done using Google Scholar. Grey literature was also sought using greylit.org. The review protocol was registered at the Prospero registry (CRD # 42017072432). The risk of bias of the included studies was assessed using EPOC criteria. Meta-analysis was performed using Review Manager for studies with quantitative data on mean values of vertical bone gain and bone resorption achieved with various bone augmentation techniques. Random effect model was used. Heterogeneity among studies was evaluated using the I2 statistic. RESULTS: A total of 2322 articles were found. After excluding the irrelevant papers, only 8 papers were finally selected for the detailed evaluation. Of these 8, 5 were clinical trials, and 3 were retrospective studies. Four studies were on DO, 2 on particulate grafting, 1 on autogenous block grafting plus particulate grafting, and 1 on tent pole grafting. The control group in all studies were autogenous block graft. Meta-analysis revealed no significant difference between DO and autogenous block grafting for vertical bone gain (mean difference 0.82 [-1.28, 2.91]). Similarly, no significant difference was observed in the 2 techniques for bone resorption (mean difference 0.38 [-0.23, 0.99]). CONCLUSIONS: DO was not superior to autogenous block grafting for vertical bone augmentation. Both techniques were associated with a number of complications. There was no difference in the bone resorption observed in the 2 techniques. No conclusive results can be drawn on other techniques on account of limited data.

Volumetric stability of autogenous bone graft with mandibular body bone: cone-beam computed tomography and three-dimensional reconstruction analysis.

OBJECTIVES: The purpose of this study was to estimate the volumetric change of augmented autobone harvested from mandibular body cortical bone, using cone-beam computed tomography (CBCT) and three-dimensional reconstruction. In addition, the clinical success of dental implants placed 4 to 6 months after bone grafting was also evaluated. MATERIALS AND METHODS: Ninety-five patients (48 men and 47 women) aged 19 to 72 years were included in this study. A total of 128 graft sites were evaluated. The graft sites were divided into three parts: anterior and both posterior regions of one jaw. All patients included in the study were scheduled for an onlay graft and implantation using a two-stage procedure. The dental implants were inserted 4 to 6 months after the bone graft. Volumetric stability was evaluated by serial CBCT images. RESULTS: No major complications were observed for the donor sites. A total of 128 block bones were used to augment severely resorbed alveolar bone. Only 1 of the 128 bone grafts was resorbed by more than half, and that was due to infection. In total, the average amount of residual grafted bone after resorption at the recipient sites was 74.6%±8.4%. CONCLUSION: Volumetric stability of mandibular body autogenous block grafts is predictable. The procedure is satisfactory for patients who want dental implants regardless of atrophic alveolar bone.

Assessment of dehydrothermally cross-linked collagen membrane for guided bone regeneration around peri-implant dehiscence defects: a randomized single-blinded clinical trial.

PURPOSE: The aim of this study was to determine the clinical feasibility of using dehydrothermally cross-linked collagen membrane (DCM) for bone regeneration around peri-implant dehiscence defects, and compare it with non-cross-linked native collagen membrane (NCM). METHODS: Dehiscence defects were investigated in twenty-eight patients. Defect width and height were measured by periodontal probe immediately following implant placement (baseline) and 16 weeks afterward. Membrane manipulation and maintenance were clinically assessed by means of the visual analogue scale score at baseline. Changes in horizontal thickness at 1 mm, 2 mm, and 3 mm below the top of the implant platform and the average bone density were assessed by cone-beam computed tomography at 16 weeks. Degradation of membrane was histologically observed in the soft tissue around the implant prior to re-entry surgery. RESULTS: Five defect sites (two sites in the NCM group and three sites in the DCM group) showed soft-tissue dehiscence defects and membrane exposure during the early healing period, but there were no symptoms or signs of severe complications during the experimental postoperative period. Significant clinical and radiological improvements were found in all parameters with both types of collagen membrane. Partially resorbed membrane leaflets were only observed histologically in the DCM group. CONCLUSIONS: These findings suggest that, compared with NCM, DCM has a similar clinical expediency and possesses more stable maintenance properties. Therefore, it could be used effectively in guided bone regeneration around dehiscence-type defects.

Volumetric stability of autogenous bone graft with mandibular body bone: cone-beam computed tomography and three-dimensional reconstruction analysis

OBJECTIVES: The purpose of this study was to estimate the volumetric change of augmented autobone harvested from mandibular body cortical bone, using cone-beam computed tomography (CBCT) and three-dimensional reconstruction. In addition, the clinical success of dental implants placed 4 to 6 months after bone grafting was also evaluated. MATERIALS AND METHODS: Ninety-five patients (48 men and 47 women) aged 19 to 72 years were included in this study. A total of 128 graft sites were evaluated. The graft sites were divided into three parts: anterior and both posterior regions of one jaw. All patients included in the study were scheduled for an onlay graft and implantation using a two-stage procedure. The dental implants were inserted 4 to 6 months after the bone graft. Volumetric stability was evaluated by serial CBCT images. RESULTS: No major complications were observed for the donor sites. A total of 128 block bones were used to augment severely resorbed alveolar bone. Only 1 of the 128 bone grafts was resorbed by more than half, and that was due to infection. In total, the average amount of residual grafted bone after resorption at the recipient sites was 74.6%+/-8.4%. CONCLUSION: Volumetric stability of mandibular body autogenous block grafts is predictable. The procedure is satisfactory for patients who want dental implants regardless of atrophic alveolar bone.

Assessment of dehydrothermally cross-linked collagen membrane for guided bone regeneration around peri-implant dehiscence defects: a randomized single-blinded clinical trial

PURPOSE: The aim of this study was to determine the clinical feasibility of using dehydrothermally cross-linked collagen membrane (DCM) for bone regeneration around peri-implant dehiscence defects, and compare it with non-cross-linked native collagen membrane (NCM). METHODS: Dehiscence defects were investigated in twenty-eight patients. Defect width and height were measured by periodontal probe immediately following implant placement (baseline) and 16 weeks afterward. Membrane manipulation and maintenance were clinically assessed by means of the visual analogue scale score at baseline. Changes in horizontal thickness at 1 mm, 2 mm, and 3 mm below the top of the implant platform and the average bone density were assessed by cone-beam computed tomography at 16 weeks. Degradation of membrane was histologically observed in the soft tissue around the implant prior to re-entry surgery. RESULTS: Five defect sites (two sites in the NCM group and three sites in the DCM group) showed soft-tissue dehiscence defects and membrane exposure during the early healing period, but there were no symptoms or signs of severe complications during the experimental postoperative period. Significant clinical and radiological improvements were found in all parameters with both types of collagen membrane. Partially resorbed membrane leaflets were only observed histologically in the DCM group. CONCLUSIONS: These findings suggest that, compared with NCM, DCM has a similar clinical expediency and possesses more stable maintenance properties. Therefore, it could be used effectively in guided bone regeneration around dehiscence-type defects.

Approaches to proximal tibial bone harvest techniques.

OBJECTIVES: The iliac crest is the standard site for harvesting bone; however, this procedure may require another specialist and a general anaesthetic. The proximal tibial bone harvest has gained popularity for harvesting autogenous bone. An analysis of the clinical literature regarding the various regions for harvesting bone demonstrates that the use of the proximal tibia led to shorter hospital stays, lower morbidity rates, and a shorter learning curve for the surgeon. The purpose of this study was to analyze the clinical anatomy of a proximal tibial bone harvest graft to provide the anatomical architecture supporting a safe procedure. MATERIALS AND METHODS: Dissection of 58 lower limbs from embalmed cadavers was conducted to determine the anatomy of a proximal tibial bone harvest (PTBH). RESULTS: Dissection revealed that the medial approach has fewer clinically relevant neurovascular structures in harms way, and a larger surface area, providing the clinician a confident surgical window to perform the procedure. CONCLUSIONS: The anatomical basis of this study suggests that the medial proximal tibial bone harvest approach would have fewer serious structures in harm's way compared to the lateral; however, the lateral approach may be preferred for a subgroup of patients.