Dental Erosion-An Occupational Hazard among Battery Manufacturing Industry Workers in Hyderabad, India.

Background and Objective: Dental erosion is a condition that results from exposure of the enamel and dentin to non-bacterial acids of extrinsic and intrinsic origin, causing mineral loss on the surface of the tooth. Occupational exposure to sulfuric acid fumes has been described in association with dental erosion in battery manufacturing industry workers. Hence, this study aimed to assess the dental erosion among battery factory workers in HBL Power Systems Ltd, Hyderabad. Materials and Methods: The sample consisted of 90 battery factory workers (62 males and 28 females). Demographic data with regard to age, gender, and length of exposure were recorded. Clinical examination was done to assess dental erosion using the tooth wear index given by Smith and Knight. Data were statistically analyzed by using Fisher exact test. P <0.05 was considered statistically significant. Results: Among 90 workers examined, 43.3% showed prevalence of erosion with higher occurrence rate in females (54%) than males (38.7%). 66.6% of affected workers had erosion score of 1, and 33.4% showed erosion score of 2 and 3. We also observed statistically significant highest prevalence and increased severity of dental erosion in workers with prolonged duration of employment (>11 years). Conclusion: The present study revealed increased prevalence of dental erosion among battery factory workers. Hence, it highlights the importance of protective measures with efficient surveillance and monitoring in the workplace environment.

Characterization of the spatial and temporal distribution of lead around a battery industrial park by LA-SPAMS.

A convenient technique for direct solids analysis, laser ablation single particle aerosol mass spectrometry (LA-SPAMS), was used to investigate lead and other components in soil and bark samples from around a battery industrial park. In total, over 50,000 particles ranging in size from 0.2 to 2 µm were sampled and approximately 15-35% of the particles were analyzed for chemical composition. The mean mass spectrum results showed that the intensity of lead varied widely among sampling points, reaching the highest intensity in the topsoil and bark at sampling point 4, located closest to the core factory. Based on the neural network algorithm of adaptive resonance theory (ART-2a), the topsoil and bark samples were classified into five categories: crustal composition (Ca+, silicates, aluminates, etc.), elemental carbon (C2-, C3-, C4-, etc.), organic carbon (CN-, levoglucosan, etc.), secondary inorganic sources (phosphates, nitrates, sulfates), and heavy metals (Pb+, Zn+, Cu+), with the proportion of Pb varying from 0.020 to 0.25% and 0.030-9.41% in topsoil and bark samples, respectively, while the proportion of Cu and Zn in topsoil and bark samples did not differ as greatly as Pb. In addition, the particle number concentrations of lead particles in topsoil and bark ranged from 0.14 to 3.48% and 0.36-37.93%, respectively. The concentrations of Pb in topsoil and bark samples measured by ICP-OES varied from 71 to 791 ppm and 172-2595 ppm, respectively. Overall, both the lead content in topsoil samples measured by LA-SPAMS and ICP-OES reached maximum values at sampling points 4 and 5, respectively, indicating moderate pollution with Pb at these two sites. This convenient LA-SPAMS method not only accurately detects the composition of solid samples, the mixing state of particulate matter, and the analytical component sources, but also omits tedious pretreatment steps, reduces the use of organic solvents, and shortens the detection time of solid samples, thereby providing an attractive method for soil environmental quality monitoring.

Lead and other elements-based pollution in soil, crops and water near a lead-acid battery recycling factory in Bangladesh.

Lead (Pb) pollution in the environment predominantly occurs through anthropogenic activities, which pose significant threats to human health and that of biota. In this study, Pb and other elements were investigated in different soils (n = 52), crops (n = 24) and water (n = 13) around a lead-acid battery (LAB) recycling workshop in southwestern Bangladesh. Most of the elements' concentrations (except Se and Ag) in soil were lower than the background concentrations. However, excessive concentrations of Pb were found in both surface (966 ± 2414 mg kg-1 at 0-15 cm) and subsurface (230 ± 490 mg kg-1 at 15-30 cm) soil. Although no definitive pattern or direction in elemental concentration in soil was observed, relatively higher concentrations of most elements were detected at the southeast part of the factory. The LAB factory, brick kiln, agricultural and geogenic activities might be the sources of these elements in soil. Extremely high amounts of Cr, As, Cd, and Pb were found in the food crops around the area. In particular, the Pb concentrations were 114 ± 155 and 665 ± 588 mg kg -1 dry weight in rice grain and straw, respectively, which reflected the emissions of Pb from the LAB recycling workshop. Moreover, 40% and 100% of the groundwater samples exceeded, respectively, the WHO provisional guideline values for As (0.01 mg L-1) and Pb (0.05 mg L-1). Consequently, a high level of Pb contamination in the soil was observed while assessing different soil pollution indices. Human health risk assessment indicated severe carcinogenic (from Pb, As, and Cr intake) and non-carcinogenic (from Pb, As, Co, Cr, Ni and Sb intake) health risks are associated with rice and groundwater consumption. It is concluded that all LAB recycling workshops should be better managed to prevent Pb pollution from seeping into the environment.

Characterization of soil contamination by lead around a former battery factory by applying an analytical hybrid method.

Former battery factories have created environmental and health problems for years and the exposure to lead in surface soils has been underestimated. Nonetheless, the identification of lead contamination and its spatial distribution is crucial. The determination of heavy metals in soils can be performed using inductively coupled plasma mass spectrometry (ICP-MS). However, alternative techniques such as X-ray fluorescence (XRF) have been used lately in environmental studies since measurements can be taken in the field in a prompt manner, despite its lower accuracy. In this study, a former battery factory site in Monterrey, Mexico, has been studied in order to detect lead contamination. Soil samples were assessed for contamination by using an analytical hybrid method that comprises both analytical techniques, namely, ICP-MS and XRF. Samples were taken in 215 locations and, after a simple homogenization process, they were analyzed by using a portable XRF device. Within those 215 sampling points, 25 samples were analyzed concurrently by using ICP-MS according to international sampling guidelines. Results obtained were adjusted in order to define an analytical hybrid method, which encompasses the advantages of each technique. An improved characterization was achieved by using the proposed analytical hybrid method since maps of lead distribution and calculated areas of concern showed better predictability. The combination of spectroscopic techniques is of great applicability for environmental agencies and decision makers.

Evaluation of the dermatologic life quality among cleanroom workers in a secondary battery factory.

BACKGROUND: Cleanroom air is extremely dry, as it is maintained within 1 % of relative humidity. Few studies have assessed the dermatologic life quality of workers in ultralow-humidity environments. Therefore, we aimed to evaluate the dermatologic life quality of cleanroom workers using the Skindex-29, compared to those of non-cleanroom workers. METHODS: Study participants were 501 cleanroom workers and 157 non-cleanroom workers from a secondary battery factory, who underwent an employee health examination at a single university hospital from September 2014 to September 2015. Results of the self-administered Skindex-29, and McMonnies questionnaire were analyzed. Other information and disease history were also collected during physician's medical examination. Descriptive and multivariate logistic regression analysis were performed. RESULTS: The Skindex-29 score was significantly higher in cleanroom workers than in non-cleanroom workers for all domains, Symptom (16.0 ± 15.9 vs. 6.3 ± 10.2, p < 0.001), Emotion (11.3 ± 17.4 vs. 2.5 ± 7.4, p < 0.001), Function (5.2 ± 11.1 vs. 1.6 ± 4.0, p < 0.001), and Overall (10.8 ± 13.4 vs. 3.5 ± 6.2, p < 0.001). The Skindex-29 score of cleanroom workers was similar to that of patients with skin diseases such as psoriasis, other dermatitis, corns, alopecia etc. Among the cleanroom workers, 37 workers had one or more skin diseases. Among the risk factors, 'working at cleanroom', 'possessing skin disease' and 'McMonnies score' had significant strong correlations with Skindex-29 score, meanwhile age, sex, smoking, drinking and exercise had weak correlations with it. 'Working at cleanroom' and 'possessing skin disease' had highest odds ratios with overall 14.0 (C.I.: 5.9-33.1) and 13.4 (C.I.: 4.5-29.2), and the lowest odds ratios with function domain 3.5(C.I.: 1.7-7.1) and 4.5(C.I.: 2.1-9.5), respectively. The McMonnies score had the highest odds ratio with overall, 6.9(C.I.: 4.5-10.8) and lowest odd ratio with emotion domain 4.2 (C.I.: 2.7-6.4). CONCLUSIONS: Dermatologic life quality among cleanroom workers in the secondary battery factory is shown to be lower than that among non-cleanroom workers in this study. The study suggests that the Skindex-29 may provide helpful information on the dermatologic life quality of cleanroom workers. Therefore, regarding evaluation of dermatologic life quality using Skindex-29, preventive care is necessary for cleanroom workers in ultralow humidity environment.

Evaluation of the dermatologic life quality among cleanroom workers in a secondary battery factory

BACKGROUND: Cleanroom air is extremely dry, as it is maintained within 1 % of relative humidity. Few studies have assessed the dermatologic life quality of workers in ultralow-humidity environments. Therefore, we aimed to evaluate the dermatologic life quality of cleanroom workers using the Skindex-29, compared to those of non-cleanroom workers. METHODS: Study participants were 501 cleanroom workers and 157 non-cleanroom workers from a secondary battery factory, who underwent an employee health examination at a single university hospital from September 2014 to September 2015. Results of the self-administered Skindex-29, and McMonnies questionnaire were analyzed. Other information and disease history were also collected during physician's medical examination. Descriptive and multivariate logistic regression analysis were performed. RESULTS: The Skindex-29 score was significantly higher in cleanroom workers than in non-cleanroom workers for all domains, Symptom (16.0 ± 15.9 vs. 6.3 ± 10.2, p < 0.001), Emotion (11.3 ± 17.4 vs. 2.5 ± 7.4, p < 0.001), Function (5.2 ± 11.1 vs. 1.6 ± 4.0, p < 0.001), and Overall (10.8 ± 13.4 vs. 3.5 ± 6.2, p < 0.001). The Skindex-29 score of cleanroom workers was similar to that of patients with skin diseases such as psoriasis, other dermatitis, corns, alopecia etc. Among the cleanroom workers, 37 workers had one or more skin diseases. Among the risk factors, ‘working at cleanroom’, ‘possessing skin disease’ and ‘McMonnies score’ had significant strong correlations with Skindex-29 score, meanwhile age, sex, smoking, drinking and exercise had weak correlations with it.‘Working at cleanroom’ and ‘possessing skin disease’ had highest odds ratios with overall 14.0 (C.I.: 5.9–33.1) and 13.4 (C.I.: 4.5–29.2), and the lowest odds ratios with function domain 3.5(C.I.: 1.7–7.1) and 4.5(C.I.: 2.1–9.5), respectively. The McMonnies score had the highest odds ratio with overall, 6.9(C.I.: 4.5–10.8) and lowest odd ratio with emotion domain 4.2 (C.I.: 2.7–6.4). CONCLUSIONS: Dermatologic life quality among cleanroom workers in the secondary battery factory is shown to be lower than that among non-cleanroom workers in this study. The study suggests that the Skindex-29 may provide helpful information on the dermatologic life quality of cleanroom workers. Therefore, regarding evaluation of dermatologic life quality using Skindex-29, preventive care is necessary for cleanroom workers in ultralow humidity environment.

Exposición a la contaminación con plomo en taller de ensamble de baterías / Exposure to lead contamination in battery assembly workshop

Introducción: Las consecuencias perjudiciales del plomo (Pb) en la salud de las personas, y los trabajadores en particular, han sido suficientemente demostradas desde hace mucho tiempo. No obstante ser un problema de tan larga data, llega hasta la actualidad; y los talleres de baterías constituyen una de las fuentes de contaminación. Objetivo General: Conocer el nivel de exposición al Pb de la totalidad de trabajadores directos de un taller de ensamble de baterías de la localidad de Boulogne, Buenos Aires. Objetivos Específicos: -Evaluar los registros sobre el nivel de Pb en sangre de los trabajadores entre 2007 y 2013. -Describir las condiciones de trabajo y las prácticas higiénicas de los empleados. -Medir la cantidad de Pb existente en el aire del establecimiento. Material y métodos: Es un estudio observacional descriptivo. El relevamiento general de riesgos se realizó mediante observación directa. Se analizaron las plombemias de los trabajadores. Las prácticas higiénico-laborales se estudiaron mediante un cuestionario semi-estructurado. Se llevó a cabo un estudio del aire. Resultados: El cumplimiento de las normas de seguridad e higiene laboral es parcial. Es una planta pequeña y mal ventilada, sin un adecuado sistema de extracción ni ventilación. No utiliza proceso húmedo o con aspiradores para la limpieza. No es sistemático el recambio de filtros de la campana de extracción ni de los respiradores personales. Las plombemias realizadas entre diciembre de 2007 y marzo de 2013 muestran valores superiores a los límites aceptables, alcanzando el promedio 19,23 ug/100ml (rango: 3 ug/100ml - 48,8 ug/100ml). Existen debilidades en cuanto a la utilización de la máscara de protección con filtros, a su higienización y a la forma en que esto se realiza. Resultados de las muestras del aire: en crisol: concentración de plomo (resultado analítico): 0,06 mg/m³; en intercelda: 0,92 mg/m3; en el sector de etiquetado: 0,03 mg/m³. Conclusiones principales: Se requiere el mejoramiento de las normas de seguridad e higiene laborales.

Introduction: The harmful effects of lead (Pb) on the health of people and workers in particular have long been sufficiently demonstrated. However being a problem as longstanding, arrives to present workshops and batteries are one of the sources of pollution. General Objective: To determine the level of exposure to Pb of all direct workers of a battery assembly workshop in the town of Boulogne, Buenos Aires. Specific Objectives: -Evaluate the records on the level of Pb in blood of workers between 2007 and 2013. -Describe the working conditions and hygiene practices of employees. -Measure the amount of Pb in the air existing in the establishment. Material and Methods: It is an observational descriptive study. The general risk survey-stage was conducted by direct observation. The lead levels of workers were analyzed. Hygiene and work practices were studied using a semi-structured questionnaire. It was made an air study. Results: Compliance with safety and hygiene is partial. It is a small and stuffy plant without adequate ventilation or exhaust system. It does not use wet or vacuum for cleaning process. No systematic replacement filters range hood or personal respirators. The lead levels between December 2007 and March 2013 show above acceptable limits values, reaching 19,23 ug/100ml average (range: 3 ug/100ml - 48,8 ug/100ml). There are weaknesses with regard to the use of the protective mask filters, to sanitize and the way this is done. Results of air samples: in pot: lead concentration (analytical result): 0,06 mg/ m3, in intercell 0,92 mg/m3; labeling sector: 0,03 mg/m3. Main conclusions: improving the safety and health at work is required.

A cohort study on blood zinc protoporphyrin concentration of workers in storage battery factory / 예방의학회지

To investigate the effectiveness of the interventions in working environment and personal hygiene for the occupational exposure to the lead, the blood zinc protoporphyrin(ZPP) concentrations of 131 workers ( 100 exposed subjects and 31 controls ) of a newly established battery factory were analyzed. They were measured in every 3 months up to 18 months. Air lead concentration (Pb-A) of the workplaces was also checked for 3 times in 6 months interval from August 1987. Environmental intervention included the local exhaust ventilation and vacuum cleaning of the floor. Intervention of the personal hygiene included the daily change of clothes, compulsory shower after work and hand washing before meal, prohibition of cigarette smoking and food consumption at the work site and wearing mask. Mean blood ZPP concentration of the controls was 16.45+/-4.83 microgram/dashliter at the preemployment examination and slightly increased to 17.77+/-5.59 microgram/dashliter after 6 months. Mean blood ZPP concentration of the exposed subjects who were employed before the factory was in operation (Group A) was 17.36+/-5.20 microgram/dashliter on employment and it was increased to 23.00+/-13.06 microgram/dashliter after 3 months. The blood ZPP concentration was increased to 27.25+/-6.40 microgram/dashliter on 6 months (p<0.01) after the employment which was 1 month after the initiation of intervention program. It did not increase thereafter and ranged between 25.48 microgram/dashliter and 26.61 microgram/dashliter in the subsequent 4 results. Mean blood ZPP concentration of the exposed subjects who were employed after the factory had been in operation but before the intervention program was initiated (Group B) was 14.34+/-6.10 microgram/dashliter on employment and it was increased to 28.97+/-7.14 microgram/dashliter (p<0.01) in 3 months later(1 month after the intervention). The values of subsequent 4 tests were maintained between 26.96 microgram/dashliter and 27.96 microgram/dashliter. Mean blood ZPP concentration of the exposed subjects who were employed after intervention program had been started (Group C) was 21.34+/-5.25 microgram/dashliter on employment and it was gradually increased to 23.37+/-3.86 microgram/dashliter (p<0.01) after 3 months, 23.93+/-3.64 microgram/dashliter after 6 months, 25.50+/-3.01 microgram/dashliter (p<0.01) after 9 months, and 25.50+/-3.10 microgram/dashliter after 12 months. Workplaces were classified into 4 parts according to Pb-A. The Pb-A of part I, the highest areas, were 0.365 microgram/m4, and after the intervention the levels were decreased to 0.216 microgram/m4 and 0.208 microgram/m4 in follow-up test. The Pb-A of part II which was resulted in lower value than part I was decreased from 0.232 microgram/m4 to 0.148 microgram/m4, and 0.120 microgram/m4 after the intervention. The Pb-A of part III was tested after the intervention and resulted in 0.124 microgram/m4 in January 1988 and 0.081 microgram/m4 in August 1988. The Pb-A of part IV was also tested after the intervention and resulted in 0.110 microgram/m4 in August 1988. There was no consistent relationship between Pb-A and blood ZPP concentration. The blood ZPP concentration of the group A and B workers in the part of the highest Pb-A were lower than those of the workers in the parts of lower Pb-A. The blood ZPP concentration of the workers in the part of the lowest Pb-A increased more rapidly. The blood ZPP concentration of the group C workers was the highest in part III. These findings suggest that the intervention in personal hygiene is more effective than environmental intervention, and it should be carried out from the first day of employment and to both the exposed subjects, blue color workers and the controls, white color workers.