Comparison of clinical outcomes between mineral trioxide aggregate and bioceramic materials in pulpotomy for treating early chronic pulpitis in deciduous teeth.

This study aims to elucidate the clinical efficacy of Mineral Trioxide Aggregate (MTA) and Bioceramic Materials in pulpotomy procedures for early-stage chronic pulpitis in deciduous teeth. The clinical data of 100 children with early chronic pulpitis in deciduous teeth treated at our institution between January 2021 and January 2023 were included retrospectively, which were divided into an experimental group (n = 50) and a control group (n = 50) according to the treatment methods. Experimental group received pulpotomy with Thera Cal LC as bioceramic pulp-capping material versus control group with MTA as pulp-capping agent. Comparative studies were conducted to assess the clinical effectiveness and differences between both pulp-capping techniques. At 12 months postoperatively, the experimental group showed a significantly higher success rate than the control group (96.00% vs. 80.00%, p < 0.05). Post-treatment inflammatory markers (Tumor Necrosis Factor-alpha (TNF-α), Interleukin-6 (IL-6) and Interleukin-8 (IL-8)) were substantially lower in the experimental group (p < 0.05). Furthermore, significantly lower pain scores and higher comfort and satisfaction scores were obtained in the experimental group (p < 0.05). Experimental group adverse reactions were also lower in the experimental group (p < 0.05). TheraCal LC bioceramic material treats early chronic pulpitis in deciduous teeth effectively. Clinically, it is an excellent therapeutic option for emergence of permanent dentition, pain relief, comfort and improvement of patient satisfaction.

Comparative Analysis of Osteointegration in Hydroxyapatite and Hydroxyapatite-Titanium Implants: An In Vivo Rabbit Model Study.

The study evaluates the osteointegration of hydroxyapatite (HAp) and hydroxyapatite-titanium (HApTi) biocomposites implanted in the femurs of rabbits. The biocomposites were fabricated using powder metallurgy and subjected to a two-step sintering process. Scanning electron microscopy (SEM) was employed to analyze the morphology, while mesenchymal stem cells were cultured to assess cytotoxicity and proliferation. In vivo experiments involved the implantation of HAp in the left femur and HApTi in the right femur of twenty New Zealand white rabbits. Computed tomography (CT) scans, histological, immunohistochemical, and histomorphometric analyses were performed to assess bone density and osteoblast activity. Results demonstrated that HApTi implants showed superior osteointegration, with higher peri-implant bone density and increased osteoblast count compared to HAp implants. This study concluded that HApTi biocomposites have potential for enhanced bone healing and stability in orthopedic applications.

Bioceramic-mediated chondrocyte hypertrophy promotes calcified cartilage formation for rabbit osteochondral defect repair.

Osteochondral tissue is a highly specialized and complex tissue composed of articular cartilage and subchondral bone that are separated by a calcified cartilage interface. Multilayered or gradient scaffolds, often in conjunction with stem cells and growth factors, have been developed to mimic the respective layers for osteochondral defect repair. In this study, we designed a hyaline cartilage-hypertrophic cartilage bilayer graft (RGD/RGDW) with chondrocytes. Previously, we demonstrated that RGD peptide-modified chondroitin sulfate cryogel (RGD group) is chondro-conductive and capable of hyaline cartilage formation. Here, we incorporated whitlockite (WH), a Mg2+-containing calcium phosphate, into RGD cryogel (RGDW group) to induce chondrocyte hypertrophy and form collagen X-rich hypertrophic cartilage. This is the first study to use WH to produce hypertrophic cartilage. Chondrocytes-laden RGDW cryogel exhibited significantly upregulated expression of hypertrophy markers in vitro and formed ectopic hypertrophic cartilage in vivo, which mineralized into calcified cartilage in bone microenvironment. Subsequently, RGD cryogel and RGDW cryogel were combined into bilayer (RGD/RGDW group) and implanted into rabbit osteochondral defect, where RGD layer supports hyaline cartilage regeneration and bioceramic-containing RGDW layer promotes calcified cartilage formation. While the RGD group (monolayer) formed hyaline-like neotissue that extends into the subchondral bone, the RGD/RGDW group (bilayer) regenerated hyaline cartilage tissue confined to its respective layer and promoted osseointegration for integrative defect repair.

Preserving Vitality: A Case Report of Partial Pulpotomy in Dental Practice.

This paper aims to evaluate the outcomes of a partial pulpotomy with mineral trioxide aggregate (MTA) in a maxillary first premolar with reversible pulpitis symptoms and signs. An intraoral periapical radiograph revealed a deep pulp-involving carious lesion without any indications of a periapical lesion, no history of night pain, and no tooth tenderness when percussion was applied. Caries removal is done using a round bur, 2-3 mm of inflamed pulp from the crown portion was removed, and bleeding was controlled within four minutes using 2.5% sodium hypochlorite, over which MTA was placed. After the setting of MTA, resin-modified glass ionomer cement was placed over it, and the tooth was restored using composite. The patient was asymptomatic in six months and one-year follow-up with no periapical changes and showed dentin bridge formation. Careful case selection, a precise selection of biomimetic material, and long-term follow-up validate the success of the treatment.

Effects of heating on bioceramic sealers: a scoping review of chemo-physical properties and clinical implications.

This scoping review aims to summarize current research to assess the impact of heating on the chemo-physical properties of bioceramic sealers. Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Extension for Scoping Reviews guidelines, a comprehensive literature search was conducted in April 2024 across PubMed and Scopus databases. Inclusion criteria referred to all study types evaluating the effect of heating temperature on bioceramic sealers' properties, with no language or time restrictions applied. Studies were independently screened by two reviewers, and relevant data were extracted and synthesized qualitatively. Out of 91 initially identified studies, 19 met the eligibility criteria for inclusion in the qualitative synthesis. The selected studies ranged from 2014 to 2024 and comprised laboratory-based investigations. Various bioceramic sealers, including EndoSequence BC Sealer, BioRoot RCS, and TotalFill BC, were analyzed across different heating techniques. The findings revealed divergent responses of bioceramic sealers to heat, with some demonstrating stability while others exhibited alterations in properties such as flow, setting time, and chemical composition. The impact of heat on bioceramic sealers depends on the sealer's composition and laboratory setting. While some sealers are affected significantly, others remain stable. Clinicians should carefully consider these factors when bioceramic sealers are used with warm obturation techniques, but caution is needed as real-world conditions may vary. Integrating laboratory results with clinical evidence is essential for improving treatment efficacy and patient care.

Regenerative Potential of Dental Pulp Stem Cells in Response to a Bioceramic Dental Sealer and Photobiomodulation: An In Vitro Study.

AIMS: This study aims to assess the synergistic effect of utilizing a bioceramic sealer, NeoPutty, with photobiomodulation (PBM) on dental pulp stem cells (DPSCs) for odontogenesis. MATERIALS AND METHODS: Dental pulp stem cells were collected from 10 premolars extracted from healthy individuals. Dental pulp stem cells were characterized using an inverted-phase microscope to detect cell shape and flow cytometry to detect stem cell-specific surface antigens. Three experimental groups were examined: the NP group, the PBM group, and the combined NP and PBM group. A 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) experiment was conducted to assess the viability of DPSCs. The odontogenic differentiation potential was analyzed using Alizarin red staining, RT-qPCR analysis of odontogenic genes DMP-1, DSPP, and alkaline phosphatase (ALP), and western blot analysis for detecting BMP-2 and RUNX-2 protein expression. An analysis of variance (ANOVA) followed by a post hoc t-test was employed to examine and compare the mean values of the results. RESULTS: The study showed a notable rise in cell viability when NP and PBM were used together. Odontogenic gene expression and the protein expression of BMP-2 and RUNX-2 were notably increased in the combined group. The combined effect of NeoPutty and PBM was significant in enhancing the odontogenic differentiation capability of DPSCs. CONCLUSION: The synergistic effect of NeoPutty and PBM produced the most positive effect on the cytocompatibility and odontogenic differentiation potential of DPSCs. CLINICAL SIGNIFICANCE: Creating innovative regenerative treatments to efficiently and durably repair injured dental tissues. How to cite this article: Alshawkani HA, Mansy M, Al Ankily M, et al. Regenerative Potential of Dental Pulp Stem Cells in Response to a Bioceramic Dental Sealer and Photobiomodulation: An In Vitro Study. J Contemp Dent Pract 2024;25(4):313-319.

In vitro evaluation of the impact of a bioceramic root canal sealer on the mechanical properties of tooth roots.

Bacground/purpose: Endodontically treated teeth are more prone to vertical root fracture with the mechanical property changes to some extent during root canal treatment. This study aimed to investigate the effects of a bioceramic sealer on the mechanical properties of tooth roots. Materials and methods: Dentin discs were dried by two different methods (ethanol drying and paper points drying) and then filled with a BC sealer named iRoot SP. SEM and EDS were used to analyze the newly formed minerals in dentin tubules. Elastic modulus and hardness of the secondary dentin in areas proximal to the primary dentin (PD-SD) and areas proximal to canal or iRoot SP (SD-C/SD-iRoot SP) were measured using nanoindentation technique. The compressive strength of roots filled with iRoot SP were tested by compressive loading test. Results: (1) Penetration and mineralization: Paper points drying was more conducive to iRoot SP adhesion, spreading and penetration into the dentin tubules than 95% ethanol drying. (2) Micromechanical properties: After filling root canal with iRoot SP, the elastic modulus and hardness of SD-iRoot SP were higher than those of PD-SD (P = 0.001 and P = 0.000). (3) Fracture resistance: The compressive strength of the roots filled with iRoot SP was not significantly different from that of the roots unprepared and unfilled (P = 0.957), but was higher than that of the roots prepared and unfilled (P = 0.009). Conclusion: Excessive drying (95% ethanol drying method) is not conducive to the penetration and mineralization of the BC sealer iRoot SP into dentin tubules. The good bioactivity of iRoot SP was responsible for increasing the elastic modulus and hardness of dentin, which strengthened the prepared roots.

The effect of bioactive glass-based, bioceramic based and epoxy amine resin based root canal sealers on post-obturation pain: A double blinded randomized controlled trial.

Aim: The aim of this study was to compare the effect of two calcium silicate-based and an epoxy resin-based root canal sealers on postoperative pain and analgesic intake following single-visit root canal treatment. Materials and Method: Ninety patients with at least one first or second molar tooth diagnosed as symptomatic irreversible pulpitis and symptomatic apical periodontitis were selected and allocated into three groups (n=30) according to the sealer used. Root canals were prepared using Protaper Gold instruments (Dentsply Sirona) in a crown down technique and irrigated with 2.5% NaOCl (Calyx, India) and saline solution. Root canal filling was then accomplished with a single cone obturation technique and treated in a single visit by the same endodontist. Patients were told to use a Visual Analog Scale (VAS) to rate their postoperative pain severity as none, minimal, moderate, or severe after 6 h, 24 h, 48 h, 5 days and 7 days following obturation using the appropriate sealers. The need for analgesic intake was also recorded. The data were statistically analyzed. Results: Results showed a significant difference among the studied groups. Bio-C Sealer Ion+ reported the least pain score followed by Nishika Canal Sealer BG and AH plus sealer at all the time intervals recorded. The intergroup analysis, revealed was a significant difference in postoperative pain at 6 h (p=0.000) and 24 h (p = 0.028), but not at 48 h, 5 day or 7 days (P > 0.05). VAS ratings for all the three groups decreased over time. Also, there were significant differences between the means of analgesic intake among 3 groups (p=0.022). Analgesic intake in group BIO-C Sealer Ion+ is significantly lesser than AH Plus and Nishika Canal Sealer BG group. Conclusion: Calcium silicate-based sealer (Nishika Canal Sealer BG and Bio-C Sealer Ion+) resulted in significantly lower levels of pain as compared to epoxy resin-based sealer (AH Plus) at 6h and 24-h interval, there was no significant difference in postoperative pain occurrence at 48-h, 5 day and 7-day period. The analgesic intake in Bio-C Sealer Ion+ group is significantly lesser than Nishika Canal Sealer BG and AH Plus group.

Effect of bioceramic intracanal medication on the dentinal bond strength of bioceramic cements: an ex-vivo study.

Background: The present study evaluated the effect of a bioceramic intracanal medicament (Bio-C Temp) on the push-out bond strength of bioceramic cements. Methods: Forty-eight human single-canaled premolars were prepared and randomly divided into three groups: Group (A) received no intracanal medicament; Group (B) calcium hydroxide (CH); and Group (C) Bio-C Temp. After medicament removal, the roots were sectioned transversely. The slices in each group were separated into two subgroups (n = 16): in Subgroup (1), mineral trioxide aggregate (MTA) was placed, and in Subgroup (2) Bio-C Repair. Push-out bond strength was determined using a universal testing machine, applying a constant compressive force on the cement until bond failure. The failure mode was also evaluated. Data were analyzed using the Chi-square test and two-way ANOVA followed by Tukey's post hoc tests. The level of significance was set at 5%. Results: The pushout bond strength of Bio-C Repair was significantly higher than that of MTA irrespective of intracanal medication (p = 0.005). The placement of Bio-C Temp was associated with significantly lower bond strength (p = 0.002, p = 0.001). Conclusion: Bio-C Repair showed better bond strength compared to MTA, irrespective of intracanal medication. Bio-C Temp intracanal medicament, however, decreased the bond strength of both these cements.

Tuning zinc content in wollastonite bioceramic endowing outstanding angiogenic and antibacterial functions beneficial for orbital reconstruction.

Prosthetic eye is indispensable as filler after enucleation in patients with anophthalmia, whereas there are still many complications including postoperative infection and eye socket depression or extrusion during the conventional artificial eye material applications. Some Ca-silicate biomaterials showed superior bioactivity but their biological stability in vivo limit the biomedical application as long-term or permanent implants. Herein we aimed to understand the physicochemical and potential biological responses of zinc doping in wollastonite bioceramic used for orbital implants. The wollastonite powders with different zinc dopant contents (CSi-Znx) could be fabricated as porous implants with strut or curve surface pore geometries (cubic, IWP) via ceramic stereolithography. The experimental results indicated that, by increasing zinc-substituting-Ca ratio (up to 9%), the sintering and mechanical properties could be significantly enhanced, and meanwhile the bio-dissolution in vitro and biodegradability in vivo were thoroughly inhibited. In particular, an appreciable angiogenic activity and expected antibacterial efficacy (over 90 %) were synergistically achieved at 9 mol% Zn dopant. In the back-embedding and enucleation and implantation model experiments in rabbits, the superior continuous angiogenesis was corroborated from the 2D/3D fibrovascular reconstruction in the IWP-pore CSi-Zn9 and CSi-Zn13.5 groups within very short time stages. Totally, the present silicate-based bioceramic via selective Zn doping could produce outstanding structural stability and bifunctional biological responses which is especially valuable for developing the next-generation implants with vascular insertion and fixation in orbital reconstruction prothesis.

Effects of ethylenediaminetetraacetic acid, citric acid, and etidronic acid on root dentin mineral content and bond strength of a bioceramic-based sealer: A scanning electron microscopy-energy dispersive spectroscopy study.

Background: This study assessed the impact of chelating agents, 17% ethylenediaminetetraacetic acid (EDTA), 10% citric acid (CA), and 18% etidronic acid (HEDP), on root dentin mineral content. Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) was applied to analyze changes, and the push-out bond strength test was used to measure dentin adhesion of Well-Root ST, a bioceramic root canal sealer. Methods: A total of 80 extracted single-rooted lower premolar teeth were included in this study and randomly divided into four groups (n=20): group 1 (17% EDTA), group 2 (10% CA), group 3 (18% HEDP), and group 4 (distilled water, control). After irrigation and drying, SEM-EDS was applied to analyze eight samples from each group at coronal, middle, and apical root regions for mineral content and SEM images. The remaining 12 samples underwent a push-out bond strength test using Well-Root ST sealer and gutta-percha. Kruskal-Wallis and Dunn's tests were used for statistical analyses. Results: Statistically significant differences were found between groups (P<0.05). SEM-EDS showed significant differences in C, O, Ca, P, and Ca/P content, with no significant differences in Na and Mg. Push-out bond strength was significantly higher in the 17% EDTA, 10% CA, and 18% HEDP groups compared to the control group, with no significant differences between chelating agents. Conclusion: Chelating agents altered root dentin mineral content and improved the adhesive properties of the bioceramic sealer. These findings highlight the importance of considering the selection and use of chelating agents in the clinical practice for root canal treatment.

Nanoleakage of apical sealing using a calcium silicate-based sealer according to canal drying methods.

Objectives: This study investigated the nanoleakage of root canal obturations using calcium silicate-based sealer according to different drying methods. Materials and Methods: Fifty-two extracted mandibular premolars with a single root canal and straight root were selected for this study. After canal preparation with a nickel-titanium rotary file system, the specimens were randomly divided into 4 groups according to canal drying methods (1: complete drying, 2: blot drying/distilled water, 3: blot drying/NaOCl, 4: aspiration only). The root canals were obturated using a single-cone filling technique with a calcium silicate-based sealer. Nanoleakage was evaluated using a nanoflow device after 24 hours, 1 week, and 1 month. Data were collected twice per second at the nanoscale and measured in nanoliters per second. Data were statistically analyzed using the Kruskal-Wallis and Mann-Whitney U-tests (p < 0.05). Results: The mean flow rate measured after 24 hours showed the highest value among the time periods in all groups. However, the difference in the flow rate between 1 week and 1 month was not significant. The mean flow rate of the complete drying group was the highest at all time points. After 1 month, the mean flow rate in the blot drying group and the aspiration group was not significantly different. Conclusions: Within the limitations of this study, the canal drying method had a significant effect on leakage and sealing ability in root canal obturations using a calcium silicate-based sealer. Thus, a proper drying procedure is critical in endodontic treatment.

A Three-Dimensional Assessment of a Type I Shallow Palatogingival Groove by Cone Beam Computed Tomography: A Case Report.

The palatogingival groove is a developmental anomaly on the palatal surface of the maxillary anterior teeth. The shallow groove, often less than 1 mm, is challenging to diagnose, particularly in radiographic examinations. Such grooves are mistaken for root fractures. In this case study, we explore the prevalence, types, radiological appearances, and treatment options of type I shallow palatogingival grooves encountered in cone beam computed tomography.

Efficacy of root-end filling techniques using premixed putty type bioceramic cements: an ex vivo study.

OBJECTIVES: Currently, premixed putty-type bioceramic cements (PPBCs) have become popular materials for root-end fillings. This study investigated three root-end filling techniques using PPBCs and calcium silicate-based sealers including EDTA pretreatment. MATERIALS AND METHODS: Ninety root segments were prepared and standardized with an artificial fin and lateral canal, and assigned to three groups (n = 30). Root-end fillings were placed using BC-RRM Putty alone (Group PA), injection of BC sealer followed by BC-RRM Putty (Lid Technique: Group LT) or BC-RRM Putty with BC sealer coating (Deep putty packing technique: Group DP). Half of each group was pretreated with 17% EDTA. The radiographic images of the specimens were assessed by five graders and push-out bond strength tests were conducted. The data were analyzed with a general linear model including two-way ANOVA and chi-square test at a significance level of 5%. RESULTS: DP approach demonstrated significantly higher bond strength than LT (P < 0.05). However, there was no statistically significant difference in bond strength between PA and either DP or LT. EDTA pretreatment had no significant effect on push-out bond strength. Radiographically, for the main canal, PA and DP scored significantly higher than LT. In the fin, PA scored significantly higher than others (P < 0.05). CONCLUSION: Our study highlights variations in root-end filling techniques. Injecting a bulk of bioceramic sealer before the placement of PPBCs may reduce bond strength and radiopacity. The application of PPBCs alone or in the deep putty technique demonstrates potential for favorable outcomes. EDTA pretreatment did not enhance bond-strength. CLINICAL RELEVANCE: Careful selection and application of bioceramic materials and techniques in root-end fillings may influence the outcome of endodontic root-end surgery. When PPBCs and calcium silicate-based sealers are used together for root-end fillings, sealer followed by deep putty application may offer improved bond strength and radiographic fill compared to the lid technique.

The influence of bioceramic cements on the activity of macrophages of different lineages: a laboratory study.

INTRODUCTION: The repair process of periradicular tissues depends, among other factors, on the properties of endodontic cements. One of the main cells involved in this process are macrophages. MATERIALS AND METHODS: Murine peritoneal macrophages obtained from C57BL/6 (MBL6) and BALB/c (MBalb) mice, respectively, were cultured with capillaries containing or not Endosequence BC Sealer® (BC), Sealer Plus BC® (MK), Bio C Sealer (Ang) and MTA®. Cell viability was measured by trypan blue and MTT methods at 24, 48 and 72 hours. Cell adhesion, phagocytosis of S. boulardii, production of reactive oxygen species (ROS), nitric oxide (NO), and the cytokines TNF-α and TGF-ß, were also evaluated. The data were analysed using the ANOVA test (p<0.05). RESULTS: Cell viability was similar between bioceramic sealers and MTA (p>0.05). There was no statistical difference between both macrophages when adherence and phagocytose were assayed. The presence of inflammation stimulus significantly altered the production of ROS by MBL6 macrophages in contact with the cements. The production of TGF-ß was similar for both lineages of macrophages. CONCLUSIONS: This study shows that the evaluated bioceramic cements do not interfere with MBL6 and MBalb macrophages adhesion, phagocytic capacity, as well as TGF-ß production. The cements stimulated the production of ROS by MBL6 macrophages in response to induced inflammation, potentially favouring the elimination of residual pathogens.

Cellular Scale Curvature in Bioceramic Scaffolds Enhanced Bone Regeneration by Regulating Skeletal Stem Cells and Vascularization.

Critical-sized segmental bone defects cannot heal spontaneously, leading to disability and significant increase in mortality. However, current treatments utilizing bone grafts face a variety of challenges from donor availability to poor osseointegration. Drugs such as growth factors increase cancer risk and are very costly. Here, a porous bioceramic scaffold that promotes bone regeneration via solely mechanobiological design is reported. Two types of scaffolds with high versus low pore curvatures are created using high-precision 3D printing technology to fabricate pore curvatures radius in the 100s of micrometers. While both are able to support bone formation, the high-curvature pores induce higher ectopic bone formation and increased vessel invasion. Scaffolds with high-curvature pores also promote faster regeneration of critical-sized segmental bone defects by activating mechanosensitive pathways. High-curvature pore recruits skeletal stem cells and type H vessels from both the periosteum and the marrow during the early phase of repair. High-curvature pores have increased survival of transplanted GFP-labeled skeletal stem cells (SSCs) and recruit more host SSCs. Taken together, the bioceramic scaffolds with defined micrometer-scale pore curvatures demonstrate a mechanobiological approach for orthopedic scaffold design.

Pulp regeneration treatment using different bioactive materials in permanent teeth of pediatric subjects.

Background and Objectives: The present systematic review aims to assess the success rate of the pulp regeneration treatment, according to the American Association of Endodontists (AAE) criteria, using different bioactive materials in permanent teeth of pediatric subjects (6-17 years of age). Materials and Methods: The study protocol was registered on PROSPERO and adhered to the Preferred Reporting Items for Systematic Reviews and Meta-analyses statement. The question formulation was accomplished using the PICO model, and an electronic search was carried out on Scopus, MEDLINE/PubMed, Web of Science, and Cochrane databases till April 1, 2023. A total of 30 studies were established to fulfill the inclusion criteria of this systematic review. Results: A total of 273 teeth have been treated with pulp regeneration treatment. By comparing different biomaterials and the success criteria defined by the AAE, the material associated with a higher success rate was found to be the white mineral trioxide aggregate. However, the overall success rate of pulp regeneration treatment was reported for 248 out of 273 teeth (91.20%). Conclusions: Data obtained support the potential that regenerative endodontics aids in continuing root development in permanent immature teeth. Further studies are needed for a more extensive evaluation of the use of different biomaterials and the success rate in regenerative endodontics.

Influence of bioceramic sealer residues on the adhesion interface with a universal adhesive in the etch-and-rinse strategy, based on the application protocol and evaluation time.

The aim of this study was to evaluate the effects of the application of universal adhesive in the etch-and-rinse (ER) strategy with a manual brush (MB) or rotary brush (RB) in adhesion to dentin impregnated (WB) or not (NB) with bioceramic sealer, at 24 h and 1 year. Eighty-eight crowns of bovine incisors were divided into four groups (n=22): WB-MB, WB-RB, NB-MB, NB-RB. After the restorative protocol, dentin penetrability was evaluated by confocal microscopy. Bond strength was evaluated by microtensile test. Data were analyzed using one-way ANOVA/Tukey tests (α=0.05). NB-RB and WB-RB exhibited greater extensions of resin tags in dentin. At 24 h, WB-RB and NB-MB showed the highest and lowest values of bond strength, respectively. At 1 year, WB-MB and WB-RB demonstrated the highest bond strength values. The RB increases the formation of resin tags and residues of bioceramic sealer provides higher bond strength in the ER strategy.

Outcomes of root canal treatments with three different sealers for 120 fractured maxillary fourth premolar teeth in small-to medium-sized dogs.

Introduction: Tooth fracture is one of the most common traumatic maxillofacial injuries in dogs and cats. For fractures with pulp exposure occurring in functionally important teeth, the literature indicates that root canal treatment (RCT) is an effective therapy option that may be the remedy of choice before extraction. The most commonly reported fractures in the United States involve canine teeth; however, fractures of the maxillary fourth premolars are more common in Korea, where there are many small-and medium-sized dogs. RCT mechanically and chemically removes pulp tissue and bacteria (cleaning and shaping) from the infected root canal, and obturates the root canal with filling material to restore tooth functionality without inflammation. Various techniques, instruments, and materials used in humans have been modified for application in veterinary dentistry. Methods: This study analyzed the results of RCT of the maxillary fourth premolar in 120 small-and medium-sized dogs (weighing less than 25 kg) using three different sealers (silicone-based sealer, bioceramic sealer, and calcium hydroxide-based sealer) through a simple application of the single-cone technique. Results: The overall success rate of RCT in maxillary fourth premolars was 90.83%, with 8.33% no evidence of failure (NEF) and 0.83% failure. Discussion: There were no significant differences between the three different sealers. Furthermore, preexisting periapical lesion (PAL) was reconfirmed as a factor in reducing the success rate of RCT. In addition, the working length and master apical file of each root were analyzed in our study as a novel reference for endodontic veterinarians.

A Literature Review of the Effect of Heat on the Physical-Chemical Properties of Calcium Silicate-Based Sealers.

INTRODUCTION: Recently, calcium silicate-based sealers (CSSs) have gained popularity in endodontic practice due to their biocompatibility and antimicrobial properties. They are considered viable alternatives to epoxy resin-based sealers. With the increased use of CSSs and warm vertical compaction techniques in root canal treatment, evaluating the impact of heat on CSSs properties is essential, therefore this review aimed to present a qualitative synthesis of available in vitro studies assessing the impact of heat on the physical-chemical properties of CSSs. METHODS: Following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis 2020 guidelines, a systematic advanced electronic search was performed in Scopus, Embase, Medline (via PubMed), Web of Science, and Cochrane databases in November 2023 and updated in April 2024. In vitro studies that evaluated the physical-chemical properties of CSSs were eligible. PRILE 2021 guidelines were used for the assessment of the risk of bias-included studies. RESULTS: The search identified a total of 6421 preliminary results and 10 studies were included for qualitative assessment. Eleven different physiochemical properties were assessed by the included studies. Setting time and flow were the most evaluated property among the studies. A qualitative synthesis of the evidence on each property is presented. CONCLUSIONS: Based on the in vitro studies assessed in the present systematic review, results reveal that exposing CSSs to heat can accelerate their setting time, reduce their flow, and increase their film thickness. Concerns persist regarding solubility, viscosity, radiopacity, dimensional change, microhardness, porosity, and compressive strength, requiring further research. Certain CSSs, such as MTA Fillapex and Endosequence BC sealer HiFlow, show minimal changes under heat, making them potential candidates for warm filling techniques.